CV Tierean Mircea Horia

F07-PS7.2-01/ed.2,rev.8

CURRICULUM VITAE

1. Nume: Ţierean 2. Prenume: Mircea Horia 3. Data şi locul naşterii: 12.11.1959, Mediaș, jud. Sibiu 4. Cetăţenie: română 5. Studii: Universitare/postuniversitare/doctorat Instituţia Universitatea

Transilvania din Braşov Universitatea Politehnica

Bucureşti Universitatea

Transilvania din Braşov Perioada: de la (anul) până la (anul) 1979-1984 1989-1990 1990-1995

Grade sau diplome obţinute Diplomă de inginer

Diplomă de absolvent curs postuniversitar

tensometrie

Diplomă de doctor inginer

6. Alte specializări şi calificări • Quassaro București, 1999, auditor intern ISO 9000 • Universitatea Bucureşti, CREDIS, Cisco Networking Academy, 2000-2001, instructor CCNA • Instituto de Soldadura e Qualidade, Porto Salvo, Portugalia, „Training and certification of

assessors in welding and nondestructive testing field”, Leonardo da Vinci proiect RO/2003/91111/EX, 2004, curs postuniversitar

• Rainer Kiel, Berlin Germania, „Training and certification of assessors in environment quality field”, Leonardo da Vinci proiect RO/2005/95093/EX, 2006, curs postuniversitar

• Investigatión y Protección en Corrosión Canarias, Spania, „Training of experts in air pollution field and their influence on materials degradation”, Leonardo da Vinci proiect RO/2006/97175/EX, curs postuniversitar

7. Titlul ştiinţific: doctor inginer 8. Experienţa profesională si didactică

Funcţia Inginer stagiar

Inginer proiectant

Asistent Şef lucrări Conferenţiar Profesor

Perioada 1984-1986 1986-89 1989-1992 1992-1997 1997-2000 2000-prezent Instituţia Intrep.

Mecanică Braşov

Institutului de Cercetare Ştiinţifică şi Inginerie Tehnologică pentru Tractoare Braşov

Univ. Transilvania Braşov




Locul Atelierul proiectare tehnologie

Atelierul proiectare tractoare industriale

Catedra IMS Catedra IMS Catedra IMS Catedra IMS

F07-PS7.2-01/ed.2,rev.8

9. Locul de muncă actual: Universitatea Transilvania din Braşov, Facultatea Ştiinţa şi Ingineria Materialelor, Departamentul Ingineria Materialelor şi Sudură 10. Vechime la locul de muncă actual: 26 ani 11. Limbi străine cunoscute: engleza, franceza 12. Lucrări publicate

12.1. Monografii și manuale

1. Leoveanu, I.S., Tierean, M.H., Metode numerice avansate: aplicaţii în modelarea metalelor, Editura Universităţii “Transilvania” Braşov, ISBN 978-973-598-671-1, 2009, 200 pag.

2. Ceorapin, G.C., Tierean, M., Roată, I.C., Metode Numerice. Lucrări de laborator în MatLab, Editura Lux Libris, ISBN 978-973-131-000-8, 2007, Braşov, 242 pag.

3. Goia, I., Vlase, S., Tierean, M., Dimitriu, S., Teodorescu, H., Pop, O., Plamadeala, R., Rezistenţa materialelor. Capitole speciale. Probleme, Editura Lux Libris Braşov, ISBN 978-973-9458-92-4, 2007, 278 pag.

4. Tierean, M., Eftimie, L., Baltes, L., Materials Science, Editura Universităţii “Transilvania” Braşov, ISBN 973-635-684-1, 2006, 322 pag.

5. Tierean, M., Mecanica ruperii, Editura Lux Libris Braşov, ISBN 973-9240-98-4, 1999, 209 pag. 6. Tierean, M., Machedon, T., Luca, V., Ghid de control cu ultrasunete, Editura Universităţii

“Transilvania” Braşov, ISBN 973-9474-27-6, 1999, 158 pag. 7. Tofan, M., Goia, I., Tierean, M., Ulea, M., Deformatele structurilor, Editura Lux Libris Braşov,

ISBN 973-96854-2-0, 1995, 248 pag. 8. Olah, A., Tierean, M., Alegerea materialelor, Universitatea “Transilvania” Braşov, 2002, 107 pag. 9. Tierean, M., Eftimie, L., Radu, G., Technical engineering, Laboratory Guide, Universitatea

“Transilvania” Braşov, 2002, 104 pag. 10. Tierean, M., Eftimie, L., Radu, G., Technical engineering, Universitatea “Transilvania” Braşov,

2001, 306 pag. 11. Tierean, M., Analiza avariilor structurilor sudate, Universitatea “Transilvania” Braşov, 1996, 194

pag. 12. Goia, I., Sperchez, F., Ciofoaia, V., Radu, Gh., Ulea, M., Tierean, M., Rezistenţa materialelor.

Culegere de probleme, Universitatea “Transilvania” Braşov, 1991, 358 pag. 13. Novac, Gh., Dinescu, I., Tierean, M., Cătană, D., Bogdan, C., Novac, N., Proiectarea maşinilor,

utilajelor şi construcţiilor sudate. Îndrumar de lucrări practice, Universitatea “Transilvania” Braşov, 1998, 49 pag.

12.2. Editor conferințe internaționale

1. Munteanu, D., Tierean, M.H., Advanced Technologies of Materials Processing, Advanced Materials Research Vol. 1128, Trans Tech Publications, ISBN-13: 978-3-03835-637-0, 2015, 406 pag.

2. Tierean, M., Raţă, C., The organizational problems and solving methods for applications in various types of energy efficient buildings in Romania, Editura Universităţii “Transilvania” Braşov, ISBN 973-635-282-X, 2004, 277 pag.

3. Ştefănescu, D., Ruxanda, R., Tierean, M., Şerban, C., Proceedings of the International Conference on the Science of Casting and Solidification, Editura Lux Libris Braşov, ISBN 973-9428-67-3, 2001, 418 pag.

12.3. Lucrări publicate în reviste ISI Web of Knowledge

1. Costiuc, L., Tierean, M., Baltes, L., Patachia, S., Experimental Investigation on the Heat of Combustion for Solid Plastic Waste Mixtures, Environmental Engineering and Management Journal, 14 (2015), 6, 2015, p. 1295-1302. FI=1,065

F07-PS7.2-01/ed.2,rev.8

2. Patachia, F.S.C., Catana Damian, L.N., Tierean, M., Baltes, L., Microbial Safety of Plastic Materials Obtained from Wastes, Environmental Engineering and Management Journal, 14 (2015), 6, 2015, p. 1303-1312. FI=1,065

3. Baltes, L.S., Tierean, M.H., Patachia, S., Investigation on the friction coefficient of the composite materials obtained from plastics wastes and cellulosic fibres, Journal of Optoelectronics and Advanced Materials, Vol. 15, No. 7- 8, July – August 2013, p. 785 – 790. FI=0,563

4. Ursutiu D., Samoila C., Baltes L.S., Tierean M.H., Vekas L., Jinga V., Labview in ultrasound plastic materials measurement, Journal of Optoelectronics and Advanced Materials, Vol. 15, No. 7- 8, July – August 2013, p. 750 – 754. FI=0,563

5. Roman I.B., Tierean M.H., Ocaña J.L., Munteanu C., Microstructural characterization and friction coefficient after the laser shock processing treatment on AISI 316 L stainless steel welds, Journal of Optoelectronics and Advanced Materials, Vol. 15, No. 7- 8, July – August 2013, p. 645–649. FI=0,563

6. Rem, P., Di Maio, F., Hu, B., Houzeaux, G., Baltes, L., Tierean, M., Magnetic fluid equipment for sorting of secondary polyolefins from waste, Environmental Engineering and Management Journal, 12 (2013), 5, p. 951-958. FI=1,258

7. Martel Fuentes, O., Mirza Rosca, J. Rodriguez Galindo, E. Baltes, L.S., Tierean, M.H., Electrochemical impedance spectroscopy characterization of passive film formed on Ti-Ta alloys, Metalurgia International, Special issue vol. XVIII no. 6 (2013) ISSN 1582 – 2214, p. 18-22. FI=0,134

8. Tierean, M.H., Baltes, L.S., Rem, P.C, Foris, T. Feasibility study of the production of secondary polyolefins from the plastic wastes using magnetic density separation, Metalurgia International, Special issue vol. XVIII no. 5 (2013) ISSN 1582 – 2214, p. 149-152. FI=0,134

9. Andrei, O.C., Dina, M.N., Mărgărit, R., Tierean, M.H., 3D finite elements analysis of stresses in a 3 unit mandibular metal-ceramic bridge, Metalurgia International, vol. XVIII (2013), no. 3, ISSN 1582-2214, p. 132-137. FI=0,134

10. Oláh A., Tierean, M.H., Verő B., Research about the properties of metal coating layers, Metalurgia International, Special issue vol. XIX no. 2 (2013) ISSN 1582 – 2214, p. 97-99. FI=0,134

11. Oláh, A., Tierean, M.H., Verő, B., Munteanu, C., Barbinta, A., Influence of laser heat treatment on metal coating layers, Journal of Optoelectronics and Advanced Materials, Vol. 15, No. 1- 2, January – February 2013, ISSN 1454-4164, p. 114-120. FI=0,563

12. Roman, I.B., Tierean, M.H., Ocaña, J.L., Effects of laser shock processing on 316L stainless steel welds, Journal of Optoelectronics and Advanced Materials, Vol. 15, No. 1- 2, January – February 2013, ISSN 1454-4164, p. 121–124. FI=0,563

13. Moldovan, A., Patachia, S., Vasile, C., Darie, R., Manaila, E., Tierean, M., Natural Fibres/Polyolefins Composites (I) UV and Electron Beam Irradiation, Journal of Biobased Materials and Bioenergy, 7, DOI: http://dx.doi.org/10.1166/jbmb.2013.1273, p. 58-79, 2013. FI= 0,586

14. Olah, A. Tierean, M.H., Research about the possibilities to increase the hardness of welded coating layers, Journal of Optoelectronics and Advanced Materials, Vol. 13, No. 7, July 2011, ISSN 1454-4164, p. 852 – 854. FI=0,457

15. Olah, A. Tierean, M.H., Research about influence of nitrocarburizing on metal coating layers, Metalurgia International, vol. XVI (2011), issue 5, ISSN 1582-2214, p. 149-152. FI= 0,084

16. Tierean, M.H., Adherence of multilayer metal coating of tubes in vibrating field, Metalurgia International, vol. XVI (2011), issue 3, ISSN 1582-2214, p. 58-62. FI= 0,084

17. Olah, A., Tierean, M.H., Giacomelli, I., Research about the practical diffusion coefficient of nitrogen and carbon at nitrocarburizing, Metalurgia International, vol. XVI (2011), issue 1, ISSN 1582-2214, p. 74-76. FI= 0,084

18. Machedon Pisu, T., Tierean, M., Baltes, L., Aspects concerning the technical diagnosis of material and welding joints of air conditioning tower in cement industry, Metalurgia International, vol. XV (2010), issue 5, ISSN 1582-2214, p. 45-51. FI=0,154

http://dx.doi.org/10.1166/jbmb.2013.1273

F07-PS7.2-01/ed.2,rev.8

19. Toldy, A., Bodzay, B., Tierean, M., Recycling of Mixed Polyolefin Wastes, Environmental Engineering and Management Journal, July/August 2009, Vol.8, No.4, p. 967-971. FI=0,885

20. Baltes, L., Draghici, C., Manea, C., Ceausescu, D., Tierean, M., Trends in Selective Collection of the Household Waste, Environmental Engineering and Management Journal, July/August 2009, Vol.8, No. 4, p. 985-991. FI=0,885

21. Tierean, M., Baltes, L., Simulation of Damage in Elastic-plastic Materials Using the Fracture Mechanics Criteria, Metalurgia International, vol. XIV (2009), special issue 2, ISSN 1582-2214, p. 155-158. FI=0,173

12.4. Lucrări publicate în ISI Proceedings

22. Mirza Rosca, J., Baltes, L.S., Tierean, M.H., The effect of Mo and Al on the corrosion behavior of titanium and some of its alloys for biomedical applications, Solid State Phenomena, Vol. 216 (2014), Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/SSP.216.11, p. 11-16.

23. Olah A., Tierean M.H., Research about relation between the microstructures and mechanical properties of metal coating layers, Solid State Phenomena, Vol. 216 (2014), Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/SSP.216.169, p. 169-174.

24. Olah, A. Tierean, M.H., Research about the wear resistance of metal coating layers, Solid State Phenomena, Vol. 188 (2012), p. 428-432, DOI: 10.4028/www.scientific.net/SSP.188.428, ISSN: 1012-0394.

25. Roman, I.B., Tierean, M.H., Baltes, L.S., Mirza Rosca, J., The effect of laser shock processing on corrosion resistance of stainless steel AISI 316L, Solid State Phenomena, Vol. 216 (2014), Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/SSP.216.210, p. 210-215.

26. Costiuc, L., Popa, V., Serban, A., Lunguleasa, A., Tierean, M.H., Investigation on heat of combustion of waste materials, Proceedings of the International Conference on Urban Sustainability, Cultural Sustainability, Green Development Green Structures and Clean Cars, Malta, September 15-17, 2010, Published by WSEAS Press, ISSN: 1792-4781, ISBN: 978-960-474-227-1, p. 165-168.

27. Tierean, M., Baltes, L., Design of Valves Used in Reciprocating Compressors, Recent Advances in Applied and Theoretical Mechanics, Proceedings of the 5th WSEAS International Conference on Applied and Theoretical Mechanics (MECHANICS '09), ISBN: 978-960-474-140-3, Published by WSEAS Press, 2009, p. 138-143.

28. Baltes, L., Tierean, M., Versatility and low cost modular tools, advances in manufacturing engineering, Quality and Production Systems (Volume II), Proceedings of the 1st International Conference on Manufacturing Engineering, Quality and Production Systems (MEQAPS '09), ISBN: 978-960-474-122-9, Published by WSEAS Press, 2009, p. 291-295.

29. Tierean, M., Baltes, L., Computing of Stress Intensity Factor using J-Integral Method with F.E.A., Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium, ISBN 978-3-901509-70-4, ISSN 1726-9679, pp 553, Editor B. Katalinic, Published by DAAAM International, Vienna, Austria 2009, p. 1105-1106.

30. Baltes, L., Tierean, M., Influence of the part shape on the polymer flow inside mold an overall strength, Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium, ISBN 978-3-901509-70-4, ISSN 1726-9679, pp 553, Editor B. Katalinic, Published by DAAAM International, Vienna, Austria 2009, p. 1107-1108.

31. Tierean, M., Baltes, L., Eftimie, L., Design of the Bridges Structures Using Mathcad, Annals of DAAAM for 2008 & Proceedings of the 19th International DAAAM Symposium, ISBN 978-3-901509-68-1, ISSN 1726-9679, pp 696, Editor B. Katalinic, Published by DAAAM International, Vienna, Austria 2008, p. 1389-1390.

32. Tierean, M., Baltes, L., Eftimie, L., Optimisation of Structures Based on Reliability, Annals of DAAAM for 2008 & Proceedings of the 19th International DAAAM Symposium, ISBN 978-3-901509-68-1, ISSN 1726-9679, pp 696, Editor B. Katalinic, Published by DAAAM International, Vienna, Austria 2008, p. 1391-1392.

F07-PS7.2-01/ed.2,rev.8

33. Baltes, L., Tierean, M., Eftimie, L., Advanced Design of High Pressure Die Casting Moulds, Annals of DAAAM for 2008 & Proceedings of the 19th International DAAAM Symposium, ISBN 978-3-901509-68-1, ISSN 1726-9679, pp 696, Editor B. Katalinic, Published by DAAAM International, Vienna, Austria 2008, p. 0065-0066.

34. Baltes, L., Tierean, M., Eftimie, L., High Speed Machining with Internet Monitoring, Annals of DAAAM for 2008 & Proceedings of the 19th International DAAAM Symposium, ISBN 978-3-901509-68-1, ISSN 1726-9679, pp 696, Editor B. Katalinic, Published by DAAAM International, Vienna, Austria 2008, p. 0067-0068.

35. Eftimie, L., Tierean, M., Baltes, L., CAD Modelling of Couplings To Extend Reliability, Annals of DAAAM for 2008 & Proceedings of the 19th International DAAAM Symposium, ISBN 978-3-901509-68-1, ISSN 1726-9679, pp 696, Editor B. Katalinic, Published by DAAAM International, Vienna, Austria 2008, p. 0473-0474.

36. Eftimie, L., Tierean, M., Baltes, L., Mold Pattern Technological CAD Design of the Compressor Cross-Head (2008). Annals of DAAAM for 2008 & Proceedings of the 19th International DAAAM Symposium, ISBN 978-3-901509-68-1, ISSN 1726-9679, pp 696, Editor B. Katalinic, Published by DAAAM International, Vienna, Austria 2008, p. 0475-0476.

37. Tierean, M., Eftimie, L., Baltes, L., C.F.D. in Reciprocating Compressor’s Valves, Annals of DAAAM for 2007 & Proceedings of the 18th International DAAAM Symposium, ISBN 3-901509-58-5, ISSN 1726-9679, pp 382, Editor B. Katalinic, Published by DAAAM International, Vienna, Austria 2007, p. 757-758.

38. Baltes, L., Tierean, M., Eftimie, L., Stress Concentration on Welded Joints’ Cracks, Annals of DAAAM for 2007 & Proceedings of the 18th International DAAAM Symposium, ISBN 3-901509-58-5, ISSN 1726-9679, pp 382, Editor B. Katalinic, Published by DAAAM International, Vienna, Austria 2007, p. 053-054.

39. Eftimie, L., Tierean, M., Baltes, L., Compensation of Compressor Rods Deformations Using Superbolts, Annals of DAAAM for 2007 & Proceedings of the 18th International DAAAM Symposium, ISBN 3-901509-58-5, ISSN 1726-9679, pp 382, Editor B. Katalinic, Published by DAAAM International, Vienna, Austria 2007, p. 269-270.

40. Tofan, M., Tierean, M., Baltes, L., Eftimie, L., Design of Geodesic Dome Structures, Annals of DAAAM for 2007 & Proceedings of the 18th International DAAAM Symposium, ISBN 3-901509-58-5, ISSN 1726-9679, pp 382, Editor B. Katalinic, Published by DAAAM International, Vienna, Austria 2007, p. 763-764.

12.5. Alte lucrări publicate: în reviste BDI (16), reviste românești (32), conferințe

internaționale (39), conferințe românești (32) 12.6. Granturi şi contracte de cercetare ştiinţifică

Programul/ Proiectul Funcţia Perioada „Studies concerning the real time monitoring of laser welding/cutting process - SMOL”, 8407/2015, cu Reukema Blocq & Maneschijn B.V. și Delft Enterprises B.V.

Coordonator 2015-2016

FP7 „Magnetic Sorting and Ultrasound Sensor Technologies for Production of High Purity Secondary Polyolefins from Waste - W2PLASTICS”, project number 212782, topic: ENV-2007-3.1.3-02: New technologies for waste sorting


POSCCE 2.2.1 „Institut de Cercetare Dezvoltare Inovare Produse HighTech pentru Dezvoltare Durabila perioada”, 11/2009 Membru 2012-2013

PNII –Parteneriate „Materiale si tehnologii performante destinate realizarii cutitelor de freza pentru asfalt - MATFREZ”, 188/2012 Membru 2012

Capacități MIII „Co-finanţare Magnetic Sorting and Ultrasound Sensor Technologies for Production of High Purity Secondary Polyolefins from Waste”, 152EU/2011


F07-PS7.2-01/ed.2,rev.8

PNII –Parteneriate „Tehnologie de depunere prin sudare hibrida LASER-MIG cu pulberi - LASERDEP”, 72-216/2008 Membru 2009-2010

PNII –Parteneriate „Tehnologii inovative pentru realizarea de elemente modulate destinate fabricării sculelor pentru deformări plastice - ELMOD”, 71-039/2007

Membru 2008-2010

PNII –Parteneriate „Solutii novative de realizare prin autoformare a modelelor pentru turnarea pieselor de serie mica si unicate - AUTOFORMODEL”, 72-203/2008

Membru 2009

„Determinarea integrităţii fizico-chimice şi a caracteristicilor mecanice şi de elasticitate ale pereţilor turnului de condiţionare gaze în incinta Lafarge Ciment România SA, uzina Hoghiz, jud. Braşov”, cu Cereng Consult SRL, 3648/2009

Coordonator 2009

MI-CCD „Optimizarea structurilor sudate pe baza fiabilității”, 662B-1994-A28 Coordonator 1994

12.7. Brevete de invenţii: nu

13. Membru în asociaţii profesionale şi ştiinţifice • ARMR, Asociația Română de Mecanica Ruperii, din 1999; • ASR, Asociația de Sudură din România, din 1998.

14. Alte competenţe (coordonare specializări, discipline, laboratoare)

• Coordonator al programului de studii de licență Ingineria securității în industrie; • Coordonator al programului de studii de master Ingineria securității și sănătății în muncă.

15. Alte menţiuni

15.1. Membru în organizații în domeniul educației și cercetării

• CNATDCU, comisia Ingineria Materialelor • Evaluator ARACIS • Evaluator CNCSIS • Evaluator AMCSIT-Politehnica • Evaluator CNMP - PNCDI2 – Parteneriate

15.2. Participări la activităţi didactice în universităţi din ţară şi străinătate:

• Socrates-2001, durata 2 săptămâni, instituție parteneră TU Delft; • Socrates-2002, durata 2 săptămâni, instituție parteneră TU Delft; • Socrates-2004, durata 2 săptămâni, instituție parteneră ENSAM Paris; • Socrates-2006, durata 2 săptămâni, instituție parteneră TU Delft; • Socrates-2007, durata 2 săptămâni, instituție parteneră TU Delft; • Socrates-2007, durata 2 săptămâni, instituție parteneră Anglia Ruskin Univerity; • Socrates-2008, durata 2 săptămâni, instituție parteneră TU Delft; • Socrates-2010, durata 1 săptămână, instituție parteneră TU Delft; • Erasmus-2014, durata 2 săptămâni, instituție parteneră TU Delft.

15.3. Organizare de evenimente ştiinţifice (conferinţe, workshop-uri, etc.):

• “International Conference on Material Science and Engineering” (BraMat), Brașov, Romania, 1999, 2001, 2003, 2005, 2007, 2009, 2011, 2013, 2015;

• International workshop “Framework, problems and methods of solutions for efficient energetic applications in different Romanian building sectors” Brasov, Romania, 2004;

F07-PS7.2-01/ed.2,rev.8

• “International Conference on Casting and Solidification” (SoCaS), Brașov, Romania, 2001. 16. Premii şi distincţii: nu 17. Experienţa managerială

• în perioada 2008-2012 am fost decanul facultății Știința și Ingineria Materialelor; • din 2011 sunt directorul Departamentului Ingineria Materialelor şi Sudură.

Data: Prof.dr.ing. Mircea Horia Ţierean 07.10.2015 Semnătura

CV Tierean Mircea Horia

Documents

Transcript of CV Tierean Mircea Horia