8/3/2019 Sistemul Rolleri ROL1 - setare rapida a sculelor de abkant

1/4

Universal systemof quick fastening

for press braketools

ROL1

System

byROLLE

RI(PATEN

TPENDING)

Distribuitor :

S.C. SM TECH S.R.L.www.sm-tech.ro

office (at) sm-tech.ro

Tel : 0745-528494

Tel/Fax: 0231-515702

8/3/2019 Sistemul Rolleri ROL1 - setare rapida a sculelor de abkant

2/4

8/3/2019 Sistemul Rolleri ROL1 - setare rapida a sculelor de abkant

3/4

Prerequisites for the adoption of ROL1on a press brake machine with connection

Amada/Promecam type

ROL1 CLAMP is adoptable on all press brake machines

which have intermediates conforming to the standard Ama-da/promecam connection.In order to guarantee the perfect practical quality of the align-ment system you need to replace the original clamps with thenew ROL1CLAMP.

Advantages using ROL1 on a press brakemachine with connection Amada/Promecam type

growth of competitiveness and/or of companyprofits ROL1 brings you the advantage of a great re-

duction of the time usually needed to change the tool. Inthis way it increases the efficiency of the whole system ma-chine-operator and this means a substantial improvementin the production field.

to save purchase and operating costs ROL1 works completely in a mechanical way and it does notneed further hydraulic or pneumatic fittings. The choice ofROL1 avoids all the costs for the purchase, the installationand the maintenance of the above described fixtures.

to prevent all the costs incurred by machinedown-time because of intervention for installa-tion the adoption ofROL1 requires only the replacementof the original clamps with the new ROL1CLAMP. Theconsequence is that it is not necessary to plan interventionsneither for the installation nor for the control, that usuallyoccur after the breaking of the intermediates.

to save on the costs of the tools and the modu-larity of the investment ROL1 does not oblige thecustomer to buy new tools because it can be applied evenon the tools the customer is already using. Moreover it is

possible to decide to replace with ROL1

CLAMP onlythose clamps necessary for the installation of the tools thathave ROL1. This choice can be convenient in case it isnecessary to use press brake machines only in their centralpart.

maximum employment versatility and a totalfreedom of choice for the customer the adoptionofROL1 does not require any modification to the dimen-sions and the reference surfaces of the tools. It means thatthe tools, even if already equipped with ROL1, can beused with the usual clamps. In this last case the operation

will be the same as before (replacement and mounting bythe side of the machine and crosswise and after that thenecessity of realignment).

the possibility, thanks to the double clamps, tomount quickly even tools which have a traditional connection.

L1 on press brake machinesa/Promecam type

ROL1 GROOVE 835

ROL1 GROOVE/C 525

ROL1 GROOVE/C 415

ROL1 GROOVE/F SECT

ROL1 GROOVE

L mm

ROL1 CLAMP1 150

ROL1 CLAMP2 200

L mm

ROL1 CLAMP3 150

L mm

8/3/2019 Sistemul Rolleri ROL1 - setare rapida a sculelor de abkant

4/4

Esempio di applicazione di ROL1su macchine con connessione tipo Trumpf-Wila

We have tested ROL1 using it together with tools we haveproduced which have a connection Trumpf-Wila type and thatdo not have any other antifall system.

The result is the perfect efficency of its practical functions andantifall security in comparison to the traditional pins.

Moreover in this particular case it is not necessary to checkany prerequisite.

Advantage of using ROL1on a press brake machine with connection

Trumpf-Wila type

ROL1 lets the operator overcome the problem of the limi-tation in the weight imposed by the present vertical quickfastening system thanks to its modularity.

the application ofROL1 does not require deep removalof material from the connection zone, therefore you avoid

weakening the mechanical structure in one part of the toolthat is already submitted to a very high mechanical stress.

ROL1 does not have release devices that stand proudfrom the surface of the tool.This limits the potential risk of

the tools being accidentally released due to contact withthe workpiece during the folding process.

Rolleri SpA

I-29020 Vigolzone (PC) - Italia - Via Artigiani, 18

Tel. +39 0523 870905 - Fax +39 0523 879030

E-mail: info@rolleri.it - www.rolleri.it

ROLLERI

Example of application of ROL1on a press brake machine with connection Trumpf-Wila type

Distribuitor :

S.C. SM TECH S.R.L.

www.sm-tech.rooffice (at) sm-tech.ro

Tel : 0745-528494

Tel/Fax: 0231-515702