Dulapuri Si Carucioare Scule pentru centre Stantat Si Scule Abkant

8/9/2019 Dulapuri Si Carucioare Scule pentru centre Stantat Si Scule Abkant

1/19

Dulapuri pentru scule pentru

centre stantat CNC, dulapuri

pentru scule abkant, carucioare

scule

Distribuitor:

S.C. SM TECH S.R.L. www.sm-tech.ro / office @ sm-tech.ro

Tel: 0331-401599 Tel : 0745-528494 Fax: 0374-091010


2/1912

Xtreme Storage Solutions

The Wilson tool cabinet XSC guarantees

maximum organisation with minimumspace requirements. Thanks to vertical

drawers, the tools are always ready to

hand.

Direct access from both sides provides

increased safety as reaching over tools

becomes needless.

Perfectly tailored fittings ensure

protective storage with an optimum use

of space.

Maximum payload of up to 4,500 kg per

cabinet (up to 900 kg per drawer) thanks

to extremely robust plastic rollers.

Transport notches for lift trucks or

carts enable quick transport when

empty.

Save time, space and money!

The Wilson Tool XSC series storage cabinets are designed to minimize the space taken to store your punch press

tools, press brake tools and other workshop equipment. The example above shows how an XSC 512 storage

cabinet requires only 1/6 of the space of conventional tool storage systems such as open tool racks, wing-door

cabinets or roll cabinets. Up to 480 B-Station tools can be stored in a footprint approximately 1m2.

In addition, XSC storage cabinets are designed to store your tools safely and productively. Drawer inserts are

designed to suit specific tool types, protecting your tools and allowing you to store them in an ordered fashion

to reduce tool access time and improve workshop efficiency. Vertical drawers can also be accessed from bothsides, preventing over-reach for safe tool access.

Tool Handling and Storage

1


3/1913

Xtreme Storage Cabinets (without drawer inserts)

Type Model Dimensions Cat. No. Price

XSC 311 3 vertical drawers (3 x 900kg payload) 660w x 1050d x 1240h 55125 1592,62





XSC 522 5 vertical drawers (5 x 900kg payload) 1040w 1300d x 2140h 55129 2862,80


XSC 311

Narrow width, standard height

cabinet. Can be configured to

suit your specific needs using

drawer inserts on pages 18 to

25. Note: not compatible with

press brake drawer inserts

XDI 103 (Cat. No. 55142) and

XDI 402 (Cat. No. 55209)

XSC 511

XSC 521

Standard width, standard height

cabinet. Can be configured to suit

your specific needs using drawer

inserts on pages 18 to 25. Note: not

compatible with drawer inserts XDI

103 (Cat. No. 55142) and XDI 402

(Cat. No. 55209).

Standard width, extra height

cabinet. Can be configured to

suit your specific needs using

drawer inserts on pages 18 to

25. Note: not compatible with

drawer inserts XDI 103 (Cat. No.

55142) and XDI 402 (Cat. No.

55209).

Standard width, standard height,

special depth cabinet, designed

to hold longer press brake tools

(capacity 33m of bending tools).

Can only be used with drawer

inserts XDI 103 (Cat. No. 55142)

and XDI 402 (Cat. No. 55209).

Standard width, extra height,

special depth cabinet, designed

to hold longer press brake tools

(capacity 44m of bending tools).

Can only be used with drawer

inserts XDI 103 (Cat. No. 55142)

and XDI 402 (Cat. No. 55209).

*Special delivery items. Please contact us for delivery price.

Narrow width, standard height

cabinet, designed to hold longer

press brake tools (capacity 20m

of bending tools). Can only be

used with drawer inserts XDI 103(Cat. No. 55142) and XDI 402

(Cat. No. 55209).

XSC 321 XSC 522

Xtreme Storage Cabinet*

XSC 512

2


4/1914

3070,53

2874,16


XSC 511 Set Thick Turret and Amada Style

Type

XDI 310

XDI 311

XDI 313

XDI 314

XDI 317

XDI 321XDI 322

XDI 325

XDI 326

XDI 328

XIS 360

Description

A station punch assemblies

A station dies

B station punch assemblies

B station dies

C station punch assemblies and dies

C station Amada style punches and diesD station punch assemblies and dies

D station Amada style punches, dies

and strippers

E station punch assemblies and dies

E station Amada style punches, dies

and strippers

Zip-Mar adhesive disks, slug ejectors,

shims (4 partition plates)

Quantity

2 EA

1 EA

2 EA

2 EA

1 EA

1 EA2 EA

1 EA

1 EA

1 EA

5 EA

Xtreme Storage Cabinet Sets for Turret Style Tooling*

XSC 511 Set Thick Turret and Wilson High Performance (HP)

Type

XDI 310

XDI 311

XDI 312

XDI 313

XDI 314

XDI 316

XDI 317XDI 319

XDI 322

XDI 324

XDI 326

XDI 327

XIS 360

Description

A station punch assemblies

A station dies

A station HP (Series 90) punches and dies

B station punch assemblies

B station dies

B station HP (Series 90) punches and dies

C station punch assemblies and diesC station HP (Series 90) punches and dies

D station punch assemblies and dies

D station HP (Series 90) punches and dies

E station punch assemblies and dies

E station HP (Series 90) punches and dies

Zip-Mar adhesive disks, slug ejectors, shims

(4 partition plates)

Quantity

2 EA

1 EA

1 EA

2 EA

2 EA

1 EA

2 EA1 EA

2 EA

1 EA

1 EA

1 EA

5 EA

XSC 511 storage cabinet (1040w x1050d x 1240h) including the following drawer inserts for Thick

Turret Style Tooling.

XSC 511 storage cabinet (1040w x1050d x 1240h) including the following drawer inserts for

Thick Turret Style Tooling.

Capacity

40 punch assemblies

80 dies

18 punches, 36 dies, 18 strippers

40 punch assemblies

90 dies

10 punches, 20 dies

12 punch assemblies, 12 dies, 12 strippers13 punches, 13 dies, 13 strippers

8 punch assemblies, 8 dies



5 punches, 5 dies

N/A

Cat No. 55139

Cat No. 55140


Capacity

40 punch assemblies

80 dies

40 punch assemblies

90 dies


12 punches, 12 dies, 12 strippers8 punch assemblies, 8 dies


4 punches, 4 dies


N/A

3


5/1915

2,729,47

www.wilsontool.com


Xtreme Storage Cabinet Sets for Trumpf Style Tooling*

Type

XDI 210

XDI 211

XDI 212

XDI 213

XDI 214XDI 215

XIS 230

XIS 231

Description

Punches size 1 and 2 (with or without collar)

Dies size 1

Dies size 2 and strippers

Strippers

Special and forming toolsCartridge assemblies (equipped or unequipped)

Punches size 0, collars (4 partition plates)

Parting / slitting blades

Quantity

3 EA

4 EA

3 EA

3 EA

1 EA1 EA

2 EA

1 EA

XSC 311 Set Trumpf


Trumpf Style Tooling.

Capacity

240 punches max

160 punches

30 sets

120 strippers

4 full sets5 cartridges

Cat No. 55135


4


6/1916

3,473,59

3,907,66

4,786,14


Punching - Trumpf Style Set*

Type

XDI 210

XDI 211

XDI 212

XDI 213

XDI 214

XDI 215

XIS 230

XIS 231

Description


Dies size 1


Strippers

Special and forming tools

Cartridge assemblies (equipped or unequipped)



Quantity

4 EA

4 EA

4 EA

4 EA

2 EA

2 EA

3 EA

2 EA

XSC 511 Set Trumpf

XSC 511 storage cabinet (1040w x1050d x 1240h) including the following drawer inserts for Trumpf

Style Tooling.

Capacity

320 punches max

160 dies max

40 sets max

160 strippers max

8 full sets max

10 cartridges max

Cat No. 55136

Type

XDI 210XDI 211

XDI 212

XDI 213

XDI 214

XDI 215

XIS 230

XIS 231

Description

Punches size 1 and 2 (with or without collar)Dies size 1


Strippers





Quantity

4 EA6 EA

5 EA

5 EA

3 EA

2 EA

3 EA

2 EA


Style Tooling.

Capacity

320 punches max240 dies

50 sets

200 strippers

12 full sets

10 cartridges

Cat No. 55137

Type

XDI 210

XDI 211

XDI 212

XDI 213

XDI 214

XDI 215

Description


Dies size 1


Strippers



Quantity

6 EA

6 EA

5 EA

5 EA

4 EA

4 EA

XSC 512 Set Trumpf


Style Tooling.

Capacity

480 punches max

240 dies

50 sets

200 strippers

16 full sets

20 cartridges

Cat No. 55138

Punching - Trumpf Style Set*

5


7/1917

1,949,18

2,512,44

4,011,01


Xtreme Storage Cabinet Sets*

XSC 311 Set Press Brake

Type

XDI 102Description

Press Brake Tools (approx 1.7m of tools)Quantity

9 EA

Capacity

16m of bending tools

Cat No. 55130


Press Brake Tooling.


Type

XDI 102Description


15 EA

Capacity


Cat No. 55131






Type

XDI 102

XDI 401

Description

Press Brake Tools (approx 1.7m of tools)Tray for storage boxes

Quantity20 EA10 EA

Capacity34m of bending tools160 storage boxes, size 7

Cat No. 55132

6


8/1918


XSC 321 storage cabinet (660w x 1300d x 1240h) including the following drawer inserts for Press Brake Tooling.

Type Description Quantity Capacity

XDI 103 Press Brake Tools (approx 2.2m of tools) 9 EA 19.8m of bending tools

Cat. No. 55293 2823,39

2675,73

60,98

69,24

4526,73


XDI 102

For approx. 1.7 meters of tools, fits in XSC

311, XSC 511 and XSC 512.

Cat No. 55141

Xtreme Drawer Inserts - For Press Brake Tooling

XDI 103

For approx. 2.2 meters of tools, fits in XSC 521

and XSC 522.

Cat No. 55142


Type

XDI 103Description


15 EA

Capacity


Cat No. 55133






Type

XDI 103

XDI 402

XPW 440

Description

Press Brake Tools (approx 2.2m of tools)Tray for storage boxesPerforated wall

Quantity

20 EA10 EA1 EA

Capacity

44m of bending tools200 stroage boxes, size 7

Cat No. 55134


7


9/1919

100,25

100,25

100,25

100,25

121,95

www.wilsontool.com


XDI 210

For punches size 1 and 2 with, or without

alignment ring, for 20 - 80 pieces max.

Xtreme Drawer Inserts - for Trumpf Style Tooling

XDI 211

For dies size 1, for 40 pieces max.

Cat No. 55144

XDI 212

For dies size 2 or alignment collars or

strippers, for 10 pieces or 10 sets max.

Cat No. 55145

XDI 213

For strippers, 40 pieces max.

Cat No. 55146

XDI 214

For special and forming tools, fitting dies size

1 and 2, forming dies, punches size 0,1 and 2,

punch inserts, tapping modules and strippers,

4 full sets max.

Cat No. 55147

Cat No. 55143

www.sm-tech.ro 8


10/1920

100,25

111,62

122,99

39,27

39,27


XDI 215

For setup cartridges, equipped or

unequipped, 5 pieces max.

Cat No. 55148

Xtreme Drawer Inserts - for Trumpf Style Tooling

XDI 216

For Wilson 2-4-1 Punch Inserts, 76 pieces

max.

Cat No. 55149

XDI 217

For Wilson 2-4-1 Die Blades, 60 dies max.

(size 1 and 2).

Cat No. 55150

XIS 230

For Size 0 punches, alignment collars, inserts,

including 5 partition plates.

Cat No. 55151

XIS 231

For Parting and Slitting blades.

Cat No. 55152

9


11/1921

60,98

107,48

122,99

60,98

107,48

www.wilsontool.com


XDI 310

For A station punch assemblies, 20 punch

assemblies max.

Cat No. 55153

Xtreme Drawer Inserts - for Turret Style Tooling

XDI 311

For A station dies, 80 dies max.

Cat No. 55154

XDI 312

For A station HP (Series 90) punches and

dies, 18 punches with strippers, 36 dies max.

Cat No. 55155

XDI 313

For B station punch assemblies, 20 punch

assemblies max.

Cat No. 55156

XDI 314

For B station dies, 45 dies max.

Cat No. 55157

10


12/1922

89,91

122,99

122,99

111,62

111,62


XDI 315

For B station punch assemblies and dies, 12

punch assemblies and 12 dies max.

Cat No. 55158


XDI 316

For B station HP (Series 90) punches and

dies, 10 punches and 20 dies max.

Cat No. 55159

XDI 317

For C station punch assemblies and dies, 6

punches and 6 dies max.

Cat No. 55160

XDI 318

For C station HP (Series 90) punches, 38

punches max.

Cat No. 55161

XDI 319

For C station HP (Series 90) punches and

dies, 13 punches with strippers and 13 dies

max.

Cat No. 55196

11


13/1923

111,62

111,62

122,99

111,62

111,62

www.wilsontool.com


XDI 320

For C station Amada style punches, 38

punches max.

Cat No. 55197


XDI 321

For C station Amada style punches, dies

and strippers; 12 punches, 12 dies and 12

strippers max.

Cat No. 55198

XDI 322

For D station punch assemblies and dies, 4


Cat No. 55199

XDI 323

For D station HP (Series 90) punches, 11

punches max.

Cat No. 55200

XDI 324

For D station HP (Series 90) punch and dies, 6

punches with strippers and 6 dies max.

Cat No. 55201

12


14/1924

122,99

122,99

122,99

122,99

39,27


XDI 325

For D station Amada style punches, dies and

strippers; 5 punches, 5 dies and 5 strippers

max.

Cat No. 55202


XDI 326

For E station punch assemblies and dies, 4


Cat No. 55203

XDI 327

For E station HP (Series 90) punches and dies,

5 punches, 5 dies and 5 strippers max.

Cat No. 55204

XDI 328

For E station Amada style punches, dies and

strippers; 4 punches, 4 dies and 4 strippers

max.

Cat No. 55205

XIS 360

For Zip-Mar adhesive disks, slug ejectors,

shims; including 5 partitions.

Cat No. 55206

13


15/1925

Type Description Size Cat. No. Price

XSB 210 Box size 8 85 x 105 x 45 55210 6,20

XSB 211 Box size 7 160 x 100 x 75 55211 8,27

XSB 212 Box size 4 350 x 220 x 145 55212 13,44

XPW 440 Perforated wall for XSC 311, XSC 511, XSC 512 910 x 250 55213 48,57

XPW 441 Perforated wall for XSC 311, XSC 511, XSC 512 910 x 895 55214 136,42

XPW 442 Perforated wall for XSC 512 910 x 1795 55215 263,54

XPW 443 Perforated wall for XSC 521, XSC 522 1162 x 895 55216 145,72

XPW 444 Perforated wall for XSC 522 1162 x 1795 55217 301,78

XDI 400*

Multipurpose tool tray (5 seperate sheets)

Cat No. 55207 86,81

XDI 401*

Tray for storage boxes; ts in XSC 311, XSC

511 and XSC 512.

Cat No. 55208 60,98

XDI 402*

Tray for storage boxes; ts in XSC 521 and

XSC 522.

Cat No. 55209 69,24


Xtreme Drawer Inserts for workshop equipment

Strorage Boxes and Perforated Walls

Box size 4 Box size 7 Box size 8

Perforated

Wall

14


16/1926

45,47

64,08

77,51

101,28

129,19


XHS 028

Hook Set includes 28 holders for spanners, screw drivers, drills, files,

pliers and various type of tooling.

Cat No. 55259

Hook Sets for Perforated Walls

XHS 040


tubes, pliers and various type of tooling.

Cat No. 55260

XHS 050


tubes, pliers and various type of tooling.

Cat No. 55261

XHS 012

Hook Set includes 12 holders for spanners, screw drivers, drills,


Cat No. 55257

XHS 018



Cat No. 55258

15


17/1927

490,91

589,10

795,80

www.wilsontool.com


XWT 580 Basic Trolley

Basic model including 1 drawer, 1 level

shelf and 1 rubber mat. Trolley sides have

perforated walls for shadow board tool storage

(compatible with hooks on page 26). Shelves

are compatible with all drawer inserts (pages 18

to 25) except XDI 103 and XDI 402.

Colour: blue RAL5002 and grey RAL9006

Total payload: 400 kg

Dimensions (mm): 582w x 922d x 922h

Cat No. 55272

Xtreme Workshop Trolleys*

XWT 581 Press Brake Trolley

Press brake including 1 drawer, 2 sloped

shelves with middle partition and 1 rubber

mat. Trolley sides have perforated walls for

shadow board tool storage (compatible with

hooks on page 26).




XWT 582 Press Brake Plus Trolley

Press brake including 1 drawer, 2 sloped

shelves with middle partition and 3 toolcarriers. Trolley sides have perforated walls for


hooks on page 26).




Cat No. 55273

Cat No. 55274


16


18/1928

899,15

811,30

806,13


XWT 583 Trumpf Style Trolley

Trumpf style including 1 drawer, 1 level shelf

and 9 tool retainers for cartridge assemblies.

Capacity 45 cartridges. Trolley sides have


(compatible with hooks on page 26).




Cat No. 55275

Xtreme Workshop Trolleys*

XWT 584 Turret Style Trolley

Turret style including 1 drawer, 1 level shelf

and 3 tool retainers (XDI 315, XDI 317 and XDI

322). Capacity 12x B station punches/dies, 6x C

station punches/dies and 4x D station punches/

dies. Trolley sides have perforated walls for


hooks on page 26).




XWT 585 Parts Storing Trolley

Including 1 drawer, 2 sloped shelves, 3 small

shelves, 20 storage boxes of size 4 and 24

storage boxes of size 7. Trolley sides have


(compatible with hooks on page 26).




Cat No. 55276

Cat No. 55277


17


19/19

2,011,19

www wilsontool com

Press Brake Tooling Cabinet*

Cat No. 90007

Solid steel construction

Mobile base with heavy duty casters with ratedcapacity of 408 kilograms each

Three 177mm drawers capable ofholding five punches each

Two 50.8mm drawers capable ofholding five dies each

Punches are held upright in custom steelU-channels to prevent damage to tips andmounting tongues

Dies are separated by custom U-channels toprevent damage to V-openings

Individual latches on all drawers

Safety interlock to prevent the opening of morethan one drawer at a time

Full width handles with clear end caps and paperlabelling strips with clear protective label covers

Retainer top with rubber mat Dimensions (mm): 1067(h) x 1022(w) x 571(d)



Distribuitor:S.C. SM TECH S.R.L.www.sm-tech.rooffice @ sm-tech.roTel: 0331-401599Tel : 0745-528494Tel/Fax: 0231-515702

Dulapuri Si Carucioare Scule pentru centre Stantat Si Scule Abkant

Documents

Transcript of Dulapuri Si Carucioare Scule pentru centre Stantat Si Scule Abkant