Audi A4 Vagcom codings

Iluminare:

Inainte de a face orice modificare notati-va valoarea existenta.Folosirea gresita a adaptarilor poate conduce la nefunctionali-tatea motorului, asa ca orice modificare o faceti pe propriul risc !

[Select][17 - Instruments][Login - 11]introduceti codul 11463 sau 01283 sau 13861 pentru a activa adap-tarile speciale[Do It!]

[Adaptation - 10]introduceti valoarea numarului canalului ales:

canalul 19 : modul de iluminare a bordului (indicatoare si scala)notati-va valoarea existenta si nu modificati decat cifra cea mai din stanga.

0xxxx totul se ilumineaza la pornirea luminilor 1xxxx indicatoarele aprinse tot timpul (odata cu contactul de cheie)2xxxx scala aprinsa tot timpul (odata cu contactul de cheie)3xxxx indicatoarele si scala aprinsa tot timpul (odata cu contac-tul de cheie)

[Test]Observati cum se modifica iluminarea display-ului de bord si daca sunteti multumiti.[Save]

Exact. Mai in detaliu, este vorba despre Instruments / Adaptation / Channel 19 unde ai un numar din 5 cifre, prima reprezentand modul de iluminare:- 0 (sau absenta) = nimic iluminat- 1 = doar indicatoarele iluminate- 2 = doar cifrele iluminate- 3 = indicatoarele si cifrele iluminate

Inchidere:

Inainte de a face orice modificare notati-va valoarea existenta.Folosirea gresita a adaptarilor poate conduce la nefunctionali-tatea motorului, asa ca orice modificare o faceti pe propriul risc !Aceasta adaptare este valabila numai pentru modelele dotate cu sistem de inchidere centralizata

Inchidere selectiva:

[Select][46 - Cent. Conv.] (35 - Cent. Locking pentru masinile cu geamuri manuale)[Recode - 07]Notati-va codul software pentru referinte ulterioareintroduceti noul cod din 5 digiti.[Do It!]

Uitati-va la codul software existent. Daca aveti descuiere selec-tiva (o apasare pe butonul telecomenzii descuie usa soferului si a doua descuie toate celelalte usi) ultimul digit al codului tre-buie sa fie un numar par. Pentru a activa descuierea tuturor usilor simultana, adaugati 1 la valoarea codului.

Incuiat/Descuiat la viteza de 15 Kmph Claxon/Avarii:

[Select][46 - Cent. Conv.] (35 - Cent. Locking pentru masinile cu geamuri manuale)[Adaptation - 10]Canalul (03..08)Valorile adaptarilor (1 = on, 2 = off)[Save]

Canalul 03 Auto LockCanalul 04 Auto UnlockCanalul 05 Unlock, horn soundsCanalul 06 Lock, horn soundsCanalul 07 Unlock, turn signals flashCanalul 08 Unlock, turn signals flash

Xenon:


[Select][Display] - less common modules[55 - H Light Range]

notati-va valoarea Soft. coding. ea reprezinta valoarea presetata si in cazul in care nu obtineti rezultatele asteptate puteti reveni la aceasta valoare.

[Recode - 07]modificati valoarea din campul software coding dupa cum urmeaza:scaderea acestei valori "ridica" farurile si invers.modificati valoarea in incremente relativ mici 5 - 10[Do it]

Acum este nevoie de recalibrarea senzorirol pentru autoajustarea nivelului farurilor.Din modulul deja selectat 55 - headlight range

[Basic Settings - 04][Group 001]asteptati cateva secunde pana cand primul camp se modifica din "wait" in "set"acum mergeti un [Group 002]asteptati pana cand afiseaza "learned"

daca doriti sa mai modificati in continuare pozitia reluati pro-cedura pana cand obtineti rezultatul dorit

distanta senzori parcare:


Adaptarea functioneaza numai la modelele care dispun de sistemul de avertizare sonora a obstacolelor la parcare.

[Select][Display] - less common modules[76 - Parking Aid][Adaptation - 10]introduceti valoarea numarului canalului ales:

canalul 1 : volumul avertizarii marsarier (valori 2 - 7)canalul 2 : frecventa avertizarii marsarier (valori 0 - 4)canalul 3 : volumul avertizarii fata (valori 2 - 7)canalul 4 : frecventa avertizarii fata (valori 0 - 4) [Test]Observati cum se modifica nivelul si frecventa avertizarii sonore, si daca sunteti multumiti[Save]

Limba computer bord:

Inainte de a face orice modificare notati-va valoarea existenta.Folosirea gresita a adaptarilor poate conduce la nefunctionali-tatea motorului, asa ca orice modificare o faceti pe propriul risc !Aceasta adaptare este valabila numai pentru modelele dotate cu computer de bord cu sistem de informatii.

[Select][17 - Instruments]


canalul 4 : limba aleasa pentru afisaj cu urmatorile valori00001 Germana 00002 Engleza 00003 Franceza 00004 Italiana 00005 Spaniola 00006 Portugheza

[Test]Observati cum se modifica limba afisata pe display.[Save]

Cantitate motorina relanti:


inainte de adaptare se fac masuratorile cantitatii injectate cu motorul la temperatura de regim (min 80 grade C) si toate acce-soriile deconectate (dezaburire, climatizare, faruri, etc)

[select][01-Engine][meas.Blocks-08][Group 001]- campul 2 Injected quantity: 2.2 - 9.0 mg/Hnotati valoarea masurata.

Pentru realizarea acestei adaptari trebuie sa folositi un cod pentru a va loga.Codul este 12233.

[Select][01 - Engine][Login - 11]introduceti codul 12233 pentru a activa adaptarile speciale [Do It!]


canalul 1 : cantitatea de motorina injectata la ralanti.valoarea de baza este 2.5 - 9 mg/hdaca aveti probleme cu trepidatiile la redusul vitezei cresteti aceasta valoare la 3 - 4 mg/hdaca doriti un raspuns mai bun al pedalei acceleratiei scadeti putin valoarea [Test]Observati cum se modifica mersul motorului si daca sunteti mul-tumiti[Save]

Modificare ciclu lucru egr:





canalul 3 : ciclul de lucru EGRPentru a scadea cantitatea de gaze recirculate trebuie sa cresteti valoarea presetata (32768) pana spre valoarea maxima (de obicei 33768 - valoare la care MAF raporteaza la ralanti 370mg/h, ceea ce este inca in limitele prevazute de fabricant) Aceasta modificare creste cantitatea de Nox din gazele de esapa-ment.

Modificare turatie relanti:





canalul 2 : turatia de ralantiValoarea din fabricatie este 32768 corespunde unei valori de 903 rpmturatia se modifica prin cresterea sau scaderea valorii date. [Test]Observati cum se modifica ralanti-ul si daca sunteti multumiti[Save]

Activare nivel lichid spalat parbriz( pt golf 5):

Select 17 (Instrument Cluster)Coding -> Function 07

00??x0x: Extra-Options

+01 - Brake Pad Warning active+02 - Seatbelt Warning active+04 - Washer Fluid Warning active +16 - Sedan (Jetta)

() Airbag

ECU adaptation

STG 15 (airbag control unit) choose STG adjustment -> Function 10

Note: To enable / disable, depending on the version control, a hardware interference in the airbag system. Depending on the ve-hicle model or do not have all the channels available.

0 - enabled 1 - disabled

-> Channel 01 (passenger airbag)

Parking ()

ECU coding

STG 76 (parking) choose Coding -> Function 07

Codierzahl (eg everything): 11103

? xxxx: Not used

x? xxx: Gear variant

0 - Gearbox 1 - Automatic transmission

xx? xx: Function Confirmation

0 - disabled 1 - enabled (default)

xxx? x: Body style

0 - sedan 1 - Avant

xxxx: vehicle

3 - Audi A3 4 - Audi A4 6 - Audi A6 8 - Audi A8

ECU adaptation

STG 76 (parking) choose STG adjustment -> Function 10

-> Channel 01 (volume Warnsummer) The volume can be from 2 to 7 adjust the value can be directly

input during the review by while the reverse is inserted. De-fault: 04

-> Channel 02 (pitch-Warnsummer) The pitch is 0 to 4 (0.5 - 2 kHz) set the value can be directly input during the review by while the reverse is inserted.

Interior Monitoring ()

ECU coding

STG 45 (interior surveillance) choose Coding -> Function 07

Codierzahl (Example): 00001 The basic coding is 00,001th

? xxx: 00 = filling without significance xx? xx: Type (1 = Audi A4) xxx? x: sharpness mode (0 = static) xxxx?: Body (1 = sedan, Avant 2 =)

ECU adaptation

STG 45 (interior surveillance) choose STG adjustment -> Function 10

-> Channel 01 (sensitivity)

The sensitivity setting of ultrasonic sensors for monitoring the interior can be set so that the sensors are less empflindlich re-spond.

The base is 100 (= 100%), the value can be in in 1% increments up to minimal 50 (= 50%) would be lowered.

Klima-/Heizungselektronik ()

ECU coding

STG 08 (Klima-/Heizungselektronik) choose Coding -> Function 07

? xxx: filling (up MJ 1996)

00 - Standard

? xxxx: filling (MJ 1997 - 1998/99)

0 - Standard

? xxx: vehicle / filling (from MY 1998/99, display)

00 - filling (from the index "M") 04 - Audi A4 (index only "K" / "L")

x? xxx: vehicle (MJ 1997 - 1998/99)

4 - Audi A4

xx? xx: Kompressortyp (until MJ 1996)

0 - Zexel Compressor 1 - Nippondenso Denso or compressor

xx? xx: Other (MJ 1997 - 1998/99)

1 - Compressor without donors for speed (G111)

xx? xx: Countries variant (from MY 1998/99, display)

0 - Rest of the World (ROW) 1 - United States 2 - Japan

xxx? x: Number of cylinders

4 a.m. to 4 p.m.-cylinder engine 6-6-cylinder engine

xxxx: Motor-/Karosserievariante

0 - left handed Benzinmtor

1 - right hand drive petrol 2 - U.S. gasoline engine (not in a display) 3 - left handed TDI engine 4 - right handed TDI engine 5 - U.S. TDI engine (not in a display)

ECU basic attitude

STG 08 (Klima-/Heizungselektronik) choose STG reading groups -> Function 08

Measuring Block 001 The following actuators angsteuert: Temperature-door V68, V70-central flap, Fußraum-/Defrostklappe-V85-pressure door-jam-V71.

Go to basic setting

The basic setting is ended once all the back coupling values are at 0.

Combined instrument ()

ECU coding

STG 17 (Instrument) choose Coding -> Function 07

? xxx: Extra options and more equipment (up MJ 2000)

+00 - No More Equipment +01 - Brake lining wear indicator actively +02 - Active safety warning +04 - Washing water display active +16 - Navigation actively

? xxx: Extra options and more equipment (from MY 2000)

+00 - No more and Navigation Equipment III +02 - Active safety warning +16 - Navigation I & II

xx? xx: Country selection

0 - Germany (GER) 1 - Europe (EU) (until MY 2000) 1 - Rest of the World left handed (ROW) (from MY 2000) 2 - United States (U.S.) 3 - Canada (CDN) 4 - Great Britain (GB) 5 - Japan (JP) (until MY 2000) 5 - left handed Japan (JP) (from MY 2000) 6 - Saudi Arabia (SA) 7 - Australia (AUS) 8 - Rest of the World right handed (ROW) (from MY 2000) 9 - Japan right handed (JP) (from MY 2000)

xxx? x: Number of cylinders

4 a.m. to 4 p.m.-cylinder 6-6-cylinder 8-8-cylinder

xxxx: engine variant

0 - TDI engine 2-4-cylinder and 6-cylinder petrol engine 3-8-cylinder petrol engine 4 - turbo engine (from MY 2000)

ECU adaptation

STG 17 (Instrument) choose STG adjustment -> Function 10

-> Channel 01 (Tankgeberkennlinie) (until MY 1998) Range: 0-254 (Repair Guide noted that a further intervention is needed.)

-> Channel 02 (service interval) Resetting the Serviceinterrvalls.

Displaying values: 01 - due Ölservice 10 - Inspection service due 11 - Oil and inspection service due Adjustment value:

00 - Oil and Inspection Service delete 01 - Ölservice delete 10 - Inspection Service delete

-> Channel 03 (consumption ad) The base is 100 now, you can round in 5% steps of the respective maximums, 85 and 125th

-> Channel 04 (language) In connection with the navigation language displayed can be sum-marized as follows:

00001 - Deutsch (German) 00002 - English (English) 00003 - French (French) 00004 - Italian (Italian) 00005 - Spanish (Spanish) 00006 - Portuguese (Portuguese)

-> Channel 05 ( "OEL" message) (until MY 1998) The new adaptation value is "00015" for inspection every 15.000km, stating in 1000 (15x1000 = 15.000km).

-> Channel 06 ( "IN 01" message) (until MY 1998) The new adaptation value is "00030" for inspection every 30.000km, stating in 1000 (30x1000 = 30.000km).

-> Channel 07 ( "IN 01" message) (until MY 1998) The new adaptation value is "00036" for the annual inspection, stating done in 10 days (36x10 = 360 days).

-> Channel 08 ( "IN 02" message) (until MY 1998) The new adaptation value is "00036" for the annual inspection, stating done in 10 days (36x10 = 360 days).

-> Channel 09 (odometer) The values indicate the route to later in the KM-counter (eg 11356 for a state of KM 113.560km). Before the combined instrument, the new KM-state must accept a login with "13861" are made.

WARNING: The KM-state can not be set until the old KM state does not exceed 100 km!

-> Channel 10 ( "OEL" message) (MJ 1998-2000) The new adaptation value is "00015" for inspection every 15.000km, stating in 1000 (15x1000 = 15.000km).

-> Channel 11 ( "IN 01" message) (MJ 1998-2000) The new adaptation value is "00030" for inspection every 30.000km, stating in 1000 (30x1000 = 30.000km).

-> Channel 12 ( "IN 02" message) (MJ 1998-2000) The new adaptation value is "00036" for the annual inspection, stating done in 10 days (36x10 = 360 days).

-> Channel 18 (Booth Heating)

00 - no parking heater installed 01 - Booth Heating installed, regardless of engine running 10 - Stand Heating installed, depending on the engine running

-> Channel 30 (Tankgeberkennlinie) (from MY 1998) The base is 128 now you can in 1 ohm steps of the respective max-imum values are 120 or 136th

-> Channel 35 (speed threshold) (from MY 2000) The adjustment value of 0 corresponds to a factory-set Öldruck-warnung when the oil pressure at a speed of 1500 1/min falls be-low 1.2 bar. The adjustment may be in 250 steps (0 - 1000) made.

0000 - 1000 rpm 0250 - 1750 rpm 0500 - 2000 rpm 0750 - 2250 rpm 1000 - 2500 rpm

-> Channel 40 (since last distance service) (from MY 2000) The input of each setpoint is only in increments of 100 km possi-ble, so is the display.

-> Channel 41 (time since last service) (from MY 2000) The input of each setpoint is only in increments of days, so shall also the display in days.

-> Channel 42 (minimal chassis km) (from MY 2000) The indication is done in 1000 (15x1000 = 15.000km).

15000 km - Default

-> Channel 43 (maximum mileage km) (from MY 2000) The indication is done in 1000 (15x1000 = 15.000km).

15000 km - without Long Life

30000 km - petrol engine with Long Life

-> Channel 44 (maximum time interval) (from MY 2000) The claim is made in days.

365 days - without Long Life 730 days - petrol engine with Long Life

-> Channel 45 (oil quality) (from MY 2000)

1 - without Long Life 2 - Long Life (maximum mileage 30.000km)

-> Channel 46 (total consumption quantity) (petrol - from MY 2000) The value specified in liters does not represent the actual con-sumption, but a calculation value for the service display data from various engine and mileage.

-> Channel 47 (Rußeintrag) (diesel) Rußeintrag in 100km steps.

-> Channel 48 (thermal stress) (diesel - from MY 2000) Thermal stress in 100km steps.

-> Channel 60 (CAN databus drive) (from MY 2000)

+00001 - Engine electronics +00002 - Auto Gear +00004 - Brakes electronics +00008 - Klima-/Heizungselektronik +00032 - ADR +01024 - Instrument

-> Channel 61 (CAN databus comfort) (from MY 2000)

+00256 - Instrument +00512 - Tire +16384 - Parking +32768 - Booth Heating

-> Channel 62 (CAN databus infotainment) (from MY 2000)

+00001 - Radio (Symphony only) +00002 - Phone +00004 - Navigation +00008 - Telematics

() Headlamp regulation

ECU coding

STG 55 (headlamp regulation) choose Coding -> Function 07

00001 - A3 front-wheel drive 00002 - A3/S3 four-wheel drive 00003 - A4 sedan / Avant front-wheel drive 00004 - A4/S4 Sedan / Avant all-wheel drive 00005 - A6 sedan / Avant front-wheel drive 00006 - A6 sedan / Avant all-wheel drive 00007 - A8 front-wheel drive 00008 - A8/S8 four-wheel drive

ECU basic attitude

STG 55 (headlamp regulation) choose STG metric units -> Function 08

Measuring Block 001

Go to basic setting

Now manually adjust the headlamps.

Measuring Block 002

Go to basic setting

The rule position of the headlights from the ECU is now "learned".

() Engine electronics

ECU coding

STG 01 (Motor Electronics) Coding -> Function 07

ADR

? xxx: Country / exhaust

02 - non-member countries of the European Union (MVEG I) 04 - Member countries of the European Union (MVEG II) 08 - China and the Commonwealth of Independent States (CIS) 25 - Japan (from 08/1996)

xx? xx: Drive / Additional features

1 - front-wheel drive without traction control drive 2 - All-wheel drive without a drive-slip regulation

xxx? x: Gear

0 - 5-speed manual gearbox 6 - automatic gearbox (01N)

xxxx: vehicle

1 = A4

ADP / ADR / AEB (<06/1996)


02 - non-member countries of the European Union (MVEG I) 04 - Member countries of the European Union (MVEG II) 08 - China and the Commonwealth of Independent States (CIS) 25 - Japan


0 - front wheel drive 2 - All-wheel drive

xxx? x: Gear

0 - 5-speed manual gearbox 3 - automatic gearbox

xxxx: vehicle

1 = A4

AEB (07/1996>)


02 - non-member countries of the European Union (MVEG I) 04 - Member countries of the European Union (MVEG II) 08 - China and the Commonwealth of Independent States (CIS)


1 - front-wheel drive without ASR 2 - All-wheel drive without ASR

xxx? x: Gear

0 - 5-speed manual gearbox 5 - automatic gearbox (01V)

xxxx: vehicle

1 = A4

ECU basic attitude

STG 01 (Motor Electronics) STG reading groups -> Function 08

electr. Gas manipulation: Data Group 060 (-> Dk. adaptation) mech. Gas manipulation: Data Group 098 (-> Dk. adaptation)

Lambda scheme off: Data Group 099 (ADR)

Go to basic setting

(Central)

ECU coding

STG 35 (central) choose Coding -> Function 07

+000001 - Open tailgate (rear locking cylinder) (from MY 2001) +000002 - Confirmation DWA-blink +000004 - SZV - selective central +000008 - Theft warning system (DWA) activate +000032 - ZV over 15 km / h lock +000064 - Comfort function via radio +000256 - Tailgate logic +000512 - Radio confirmed closed (1x blinking) +002048 - Tür-/Fensterheberlogik (USA) (from MY 2001) +004096 - Radio-open acknowledgment (2x blinking) +008192 - Wireless remote activate

ECU adaptation

STG 35 (central) choose STG adjustment -> Function 10

-> Channel 62 (functions)

The base is 000, the default value for Germany is 095, the de-fault value for USA / Canada / Australia / Japan is 076th

+001 = Close comfort via radio remote control for windows +002 = Comfort opening via radio remote control for windows +004 = Comfort Close on locking cylinder for windows +008 = Comfort opening of locking cylinder for windows +016 = Close comfort via radio remote for sunroof +032 = Comfort opening via radio remote for sunroof +064 = Comfort Close on locking cylinder for sunroof +128 = Comfort opening of locking cylinder for sunroof

Audi A4 Vagcom codings

Documents

Transcript of Audi A4 Vagcom codings