Lista lucr ărilor elaborate - Universitatea din Craiova · ENACHE, S. , VLAD, I.: Masina de...

___________________________________________________________________________

Lista de lucrări – prof. dr. ing. Sorin ENACHE 1/26

Prof. dr. ing. Sorin ENACHE

Lista lucrărilor elaborate

1. Lista celor mai relevante lucrări

1. ENACHE, S., VLAD, I.: Masina de inductie. Notiuni fundamentale. Procese dinamice, Ed. Universitaria Craiova, 2002, ISBN: 973-8043-122-2 (254 pag.).

2. ENACHE, S., VLAD, I, ENACHE, M. A.: Aspects Regarding Dynamic Regimes of

Induction Motors Control by the Stator Flux, Power Engineering, Energy and Drives, (POWERENG 2007), Setubal, Portugal, April 12-14, 2007, ISBN: 978-1-4244-0895-5, pp. 152-155 [ISI Thomson-Reuters, IEEE Xplore].

https://apps.webofknowledge.com/full_record.do?product=UA&search_mode=GeneralSearch&qid=1&SID=T2u4R8p9SUPvA2rQWFy&page=3&doc=23

3. ENACHE, S., CAMPEANU, A., VLAD, I.: Pre-determination of performances in dynamic regime by numerical methods at direct current motors, 19-th International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM 2008), Ischia, Italy, 11-13 June, ISBN: 978-1-4244-1664-6, pp. 311-316 [ISI Thomson-Reuters, IEEE Xplore].

https://apps.webofknowledge.com/full_record.do?product=UA&search_mode=GeneralSearch&qid=10&SID=Y2IJhpO3DOzuWboZ1yO&page=2&doc=16

4. ENACHE, S., ENACHE, M. A., DOBRICEANU, M., DRIGHICIU, M., PETRISOR, A.: Motor Parameters Influence on Stability of Drive for Industrial Robot, 5th International Conference on Informatics in Control, Automation and Robotics (ICINCO 2008), Funchar-Madeira, Portugal, May 11-15, 2008, pp. 271-274 [ISI Thomson-Reuters].


5. ENACHE, S., BITOLEANU, A., ENACHE, M. A., DOBRICEANU, M.: Stability of Some Driving Systems Analyzed by Means of Roots Geometric Locus, New Aspects of Systems Theory and Scientific Computation, Proceedings of the 8th International Conference on Systems Theory and Scientific Computation (ISTASC’08), Rhodos, Greece, August 20-22, 2008, ISBN: 978-960-6766-96-1, pp. 106-111 [ISI Thomson-Reuters].


6. ENACHE, S., CAMPEANU, A., VLAD, I., ENACHE, M. A.: Determination of Asynchronous Machine Parameters by Means of Exhaustive Exploring Method,

___________________________________________________________________________


Challenges in Power, High Voltahe and Machines, Proceedings of the 7th International Conference on Electric Power Systems, High Voltage, Electric Machines (POWER’07), Venice, Italy, 2007, ISBN: 978-960-6766-13-8, pp. 1-6 [ISI Thomson-Reuters].


7. ENACHE, S., CAMPEANU, A., VLAD, I., ENACHE, M. A.: Modeling of Line-Starting of Reluctance Synchronous Motors Considering Magnetic Saturation, with Experimental Validation, International Conference on Optimization of Electrical and Electronic Equipment (OPTIM 2014), Brasov/Cheile Gradistei, 2014, ISSN: 978-1-4799-5183-3, 2014, pp. 324-329 [ISI Thomson-Reuters, IEEE Xplore].


8. ENACHE, S., CAMPEANU, A., VLAD, I., ENACHE, M. A.: Computer Tools in Electrical Engineering Education, International Conference on Electrical and Power Engineering (EPE 2014), Iasi, ISBN: 978-1-4799-5848-1, 2014, pp.194-197 [ISI Thomson-Reuters, IEEE Xplore].

https://apps.webofknowledge.com/full_record.do?product=UA&search_mode=GeneralSearch&qid=1&SID=N2N4We2GbkyjtJJgyB2&page=1&doc=2

9. ENACHE, S., CAMPEANU, A., VLAD, I., ENACHE, M. A.: Modelling and Monitoring Aspects Concerning the Vector Controlled Reluctance Synchronous Motor Drives, The 9th International Symposium on Advanced Topics in Electrical Engineering (ATEE 2015), May 7-9, 2015, Bucharest, Romania, ISBN: 978-1-4799-7514-3/15/$31.00 [ISI Thomson-Reuters, IEEE Xplore].

https://apps.webofknowledge.com/full_record.do?product=UA&search_mode=GeneralSearch&qid=1&SID=W2ADmFPHUiGMFLXaPAZ&page=1&doc=2

10. CAMPEANU, A., VLAD, I., ENACHE, S.: Numerical analysis of the dynamic behavior

of a high power salient pole synchronous machine by using a corrected model, Advances in Electrical and Computer Engineering, Volume 12, Issue 1, Year 2012, ISSN: 1582-7445, pp. 97-102 [ISI Thomson-Reuters].


2. Teza de doctorat

T1. ENACHE, S.: Analiza unor procese de baza specifice functionarii masinii de inductie la

frecventa variabila, Universitatea din Craiova, Conducător ştiinŃific prof. dr. ing. Aurel CÂMPEANU, 2001, Diploma nr. 149/08.11.2001, OMEN nr. 4911/02.11.2001 (Teza se află în arhiva UniversităŃii din Craiova).

___________________________________________________________________________


3. Cereri brevete de invenŃie

I1. ENACHE, S., CAMPEANU, A., VLAD, I., ENACHE, M. A.: Metodă şi dispozitiv de

sincronizare pentru determinarea parametrilor maşinilor de inducŃie cu rotorul în scurtcircuit printr-o încercare dinamică, CB OSIM nr. A/00926, 03.12.2012, BOPI nr. 06/2014, Patent number: RO129608-A2, Derwent Primary Accesion Number: 2014-P50845 [55].

https://apps.webofknowledge.com/full_record.do?colName=DIIDW&recordID=2014P50845&log_event=no&page=2&qid=1&log_event=yes&viewType=fullRecord&SID=V18FUcMtVJ4JRPUtD4W&product=UA&doc=13&search_mode=GeneralSearch

I2. VLAD, I., ENACHE, S., ENACHE, M. A.: Metoda pentru optimizarea proiectarii motoarelor de curent continuu fără perii, CB OSIM nr. A/10071/2015, 30.11.2015.

4. Căr Ńi de specialitate

C1. ENACHE, S., VLAD, I.: Maşina de inductie. NoŃiuni fundamentale. Procese dinamice, Editura Universitaria Craiova, 2002, ISBN: 973-8043-122-2 (273 pag.).

C2. ENACHE, S.: Maşini electrice speciale, Editura Universitaria, Craiova, 2005 (122 pag.), ISBN: 973-742-027-6.

C3. ENACHE, S., ENACHE, M. A.: Notiuni fundamentale de masini si micromasini electrice, Editura Universitaria, Craiova, 2008 (258 pag.), ISBN: 978-606-510-215-6.

C4. ENACHE, S.: Măsurări electrice şi electronice – Manual universitar pentru învăŃământ cu frecvenŃă redusă, Editura Universitaria, Craiova, 2012 (164 pag.), ISBN: 978-606-14-0372-1.

C5. ENACHE, S.: Echipamente electrice şi electronice pentru autovehicule – Manual universitar pentru învăŃământ cu frecvenŃă redusă, Editura Universitaria, Craiova, 2012 (196 pag.), ISBN: 978-606-14-0354-7.

C6. ENACHE, S.: Compatibilitate electromagnetica – Indrumar de laborator, Editura Universitaria 2006 (114 pag.), ISBN: 973-742-395-X 978-973-742-395-5.

C7. CAMPEANU, A., CAUTIL, I., VLAD, I., ENACHE, S.: Modelarea şi simularea maşinilor electrice de curent alternativ, Bucureşti, Editura Academiei Române, 2012, (266 pag.), ISBN: 978-973-27-2233-6.

C8. VLAD, I., CAMPEANU, A., ENACHE, S.: Proiectare asistată a maşinilor de curent continuu. Craiova, Editura Universitaria Craiova, 2008, (302 pag.), ISBN: 978-606-510-026-8.

C9. VLAD, I., CAMPEANU, A., ENACHE, S.: Proiectare asistată a maşinilor asincrone. Probleme de optimizare, Craiova, Editura Universitaria Craiova, 2011 (406 pag.), ISBN: 978-606-14-0076-8.

C10.MARES, F., BALAŞOIU, T., FETECAU, G., ENACHE, S., FEDERELCIUC, D.: Elemente de comandă şi control pentru actionări şi sisteme de reglare automată, Manual pentru clasele a XI-a şi a XII-a, Editura Economică-Preuniversitaria, Bucureşti, 2002 (272 pag.), ISBN: 973-8318-30-0.

___________________________________________________________________________


C11.VLAD, I., ENACHE, S., ALEXANDRU, D.: Utilizarea metodelor numerice în proiectarea maşinilor electrice de tracŃiune, Craiova, Editura SITECH, 2000 (258 pag.), ISBN: 973-8025-83-4.

C12. ENACHE, S.: Elemente de execuŃie electrice, Reprografia UniversităŃii din Craiova, 2000 (150 pag.).

5. Articole în extenso în reviste cotate şi în volume proceedings indexate ISI Thomson-Reuters

Ai1. CAMPEANU A., VLAD I., CIMPEANU T., ENACHE S., CAUłIL I.: Simulation of

Dynamic Single Supply Back-to-Back High Power Synchronous Mahines Opertion, Revue Roumanie des Sciences Techniques, Serie Electrotehnique et Energetique, Year 2014, Issue 3, ISSN 0035-4066, 2014, pp. 227-236.


Ai2. CAMPEANU, A., VLAD, I., ENACHE, S.: Numerical analysis of the dynamic behavior of a high power salient pole synchronous machine by using a corrected model, Advances in Electrical and Computer Engineering, Volume 12, Issue 1, Year 2012, ISSN 1582-7445, pp. 97-102.


Ai3. VLAD I., CAMPEANU A., ENACHE, S., PETROPOL G.: Operation Characteristics Optimization of Low Power Three-Phase Asynchronous Motors, Advances in Electrical and Computer Engineering, Volume 14, Issue 1, Year 2014, DOI: 10.4316/AECE.2014.01014, ISSN 1582-7445, pp. 87-92.


Ai4. ENACHE S., CAMPEANU A., VLAD I., ENACHE M.A.: Modeling of Line-Starting of Reluctance Synchronous Motors Considering Magnetic Saturation, with Experimental Validation, International Conference on Optimization of Electrical and Electronic Equipment OPTIM 2014, Brasov/Cheile Gradistei, 2014, ISSN 978-1-4799-5183-3, 2014, pp. 324-329.


Ai5. VLAD I., CAMPEANU A., ENACHE S., ENACHE M.A.: Energetic Aspects and Monitoring of Asynchronous Motors Starting, International Conference on Optimization of Electrical and Electronic Equipment OPTIM 2014, Brasov/Cheile Gradistei, 2014, ISSN 978-1-4799-5183-3, 2014, pp. 306-311.


Ai6. CÂMPEANU A., VLAD I., ENACHE S., ENACHE M.A.: Simulation and Recoverable Testing of Synchronous Machines, International Conference on Optimization of Electrical and Electronic Equipment OPTIM 2014, Brasov/Cheile Gradistei, 2014, ISSN 978-1-4799-5848-1, 2014, pp. 318-323.


Ai7. ENACHE S., CAMPEANU A., VLAD I., ENACHE M.A.: Method and Device of Syncronization for Determination of Squirrel Cage Asynchronous Motors Parameters,

___________________________________________________________________________


The 8 th International Symposium on ADVANCED TOPICS IN ELECTRICAL ENGINEERING, 23-25 mai 2013, Bucureşti, ELMAD P4, ISBN 978-1-4673-5979-5, 2013, pp. 1-4.


Ai8. VLAD I., CAMPEANU A., ENACHE S., ENACHE M.A.: Optimization of Asynchronous Motor Characteristics Used for Mining Excavator, The 8 th International Symposium on ADVANCED TOPICS IN ELECTRICAL ENGINEERING, 23-25 mai 2013, Bucureşti, ELMAD P3, ISBN 978-1-4673-5980-1, 2013, p. 1-6.


Ai9. VLAD, I., CAMPEANU, A., ENACHE, S., ENACHE, M. A.: Aspects regarding design of squirrel cage asynchronous motors for mining excavators, International Conference on Applied and Theoretical Electricity ICATE 2012, ISSN 978-1-4673-1810-5, 2012, pp. 1-6.


Ai10. ENACHE, M. A., CAMPEANU, A., ENACHE, S., VLAD, I.: Possibilities for reluctance synchronous machines parameters experimental determination, International Conference on Applied and Theoretical Electricity, ICATE 2012, Craiova, Oct.25-27, 2012, ISBN 978-1-4673-1810-5, 2012, pp. 1-6.


Ai11. ENACHE, S., CAMPEANU, A., VLAD, I., ENACHE, M. A.: Reluctance synchronous motors modelling and analysis, International Conference on Applied and Theoretical Electricity, ICATE 2012, Craiova, Oct.25-27, 2012, ISBN 978-1-4673-1810-5, 2012, pp. 1-6.


Ai12. CAMPEANU, A., VLAD, I., ENACHE, S., AUGUSTINOV, L., LIUBA, G., CAUTIL, I.: Optimization of startup characteristics of medium power asynchronous motors with short circuit rotor, XXth International Conference on Electrical Machines (ICEM’2012), September 2-5, 2012, Marseille, France, ISBN 978-1-4673-0142-8, 2012, pp. 1387-1392.


Ai13. CAMPEANU, A., ENACHE, S., VLAD, I., LIUBA, G., AUGUSTINOV, L., CAUTIL, I.: Simulation of Asynchronous Operation in High Power Salient Pole Synchronous Machines, XXth International Conference on Electrical Machines (ICEM’2012), September 2-5, 2012, Marseille, France, ISBN 978-1-4673-0142-8 , 2012, pp. 1823-828.


Ai14. ENACHE S., CAMPEANU A., VLAD I., ENACHE M.A.: Possibility for Analysis of the Reluctance Synchronous Motors Dynamic Stability, The 7th International Symposium on ADVANCED TOPICS IN ELECTRICAL ENGINEERING, 12-14 mai 2011, Bucureşti, ISBN 978-1-4577-0507-6, p. 1-6.


Ai15. ENACHE S., CAMPEANU A., VLAD I., ENACHE M.A.: Aspects Regarding Dynamic Regimes Modeling, Simulation and Monitoring for Reluctance Synchronous

___________________________________________________________________________


Motors, 12th International Conference on 20-22 May 2010, OPTIM 2010 Brasov, ISBN 978-1-4244-7019-8, 2010, pp. 273-278.


Ai16. CAMPEANU, A., IONESCU, A., VLAD, I., ENACHE, S.: Prediction through simulation of the optimal behavior of the induction machine in complex process, 19-th International Symposium on Power Electronics, Electrical Drives, Automation and Motion SPEEDAM 2008, Ischia (Italy), 11-13 June, ISBN: 978-1-4244-1664-6, p. 1130-1134.


Ai17. VLAD, I., CAMPEANU, A., ENACHE, S.: Improvement of pre-determination precision of operation characteristics for asynchronous motor by considering magnetic saturation, 19-th International Symposium on Power Electronics, Electrical Drives, Automation and Motion SPEEDAM 2008, Ischia (Italy), 11-13 June, ISBN: 978-1-4244-1664-6, p. 614-619.


Ai18. ENACHE S., CAMPEANU, A., VLAD, I.: Pre-determination of performances in dynamic regime by numerical methods at direct current motors, 19-th International Symposium on Power Electronics, Electrical Drives, Automation and Motion SPEEDAM 2008, Ischia (Italy), 11-13 June, ISBN: 978-1-4244-1664-6, p. 311-316.


Ai19. ENACHE, M.A., ENACHE, S., DOBRICEANU, M.: Considerations regarding dynamic regimes of reluctance synchronous motors, SPEEDAM 2008 - International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2008, Ischia (Italy), 11-13 June, ISBN: 978-1-4244-1664-6, pp. 284-289.

https://apps.webofknowledge.com/full_record.do?product=UA&search_mode=GeneralSearch&qid=1&SID=P2QGNTDUfnRfOuLw3bz&page=2&doc=13

Ai20. DOBRICEANU, M., BITOLEANU, A., POPESCU, M., SUBTIRELU, E., ENACHE, S.: Combined protection and control equipment for applications in the medium-voltage area, 19-th International Symposium on Power Electronics, Electrical Drives, Automation and Motion SPEEDAM 2008, Ischia (Italy), 11-13 June, IEEE Catalog Number: CFP0848A-CDR, ISBN: 978-1-4244-1664-6, pp. 860-865.


Ai21. OSIAC V., CAMPEANU A., VLAD I., ENACHE S.: Solutions Proposed for the Optimization of Installations for Electrical Dedusting. The 11th International Conference on Optimization of Electric and Electronic Equipment, OPTIM 2008, Brasov 2008, ISBN:978-1-4244-1544-1, p. 93-98.


Ai22. VLAD I., CAMPEANU A., ENACHE S., ENACHE M.A.:Pre-determination by Simulation of Dynamic Regime for Direct Current. The 11th International Conference on Optimization of Electric and Electronic Equipment, OPTIM 2008, Brasov 2008, ISBN:978-1-4244-1544-1,p. 111-116.


___________________________________________________________________________


Ai23. ENACHE S., CAMPEANU A., VLAD I., ENACHE M.A.: Determination of Asynchronous Machine Parameters by a Dynamic Test. The 11th International Conference on Optimization of Electric and Electronic Equipment, OPTIM 2008, Brasov 2008, ISBN:978-1-4244-1544-1, p. 57-62.


Ai24. ENACHE S., CAMPEANU A., VLAD I., ENACHE M.A.: Determination of asynchronous machine parameters by means of exhaustive exploring method. Challenges in Power, High Voltahe and Machines. Proceedings of the 7th WSEAS/ASME International Conference on Electric Power Systems, High Voltage, Electric Machines (Power ’07), VeneŃia, Italia, 2007, ISBN:978-960-6766-13-8, p. 1-6.


Ai25. ENACHE S., CAMPEANU A., VLAD I., ENACHE Monica: A New Method for Induction Motor Stability Analysis When Supplying at Variable Frequency. Conference on SYSTEMS THEORY AND SCIENTIFIC COMPUTATION, ISTASC’07, Vouliagmeni, Athens, Greece, 24-26 aug. 2007, ISBN 978-960-8457-98-0, p. 117-120.


Ai26. CAMPEANU A., VLAD I., ENACHE S., IONESCU A.: Study of a Particular Recovery Regime of the Synchronous Machine and its Applications. ACEMP’07 şi ELECTROMOTION’07, Bodrun, Turkey, 10-12 septembrie, 2007, ISBN:978-1-4244-0890-0, p. 319-324.


Ai27. DOBRICEANU, M., BITOLEANU, A., POPESCU, M., ENACHE, S., VLADUT, G.: Method and System for Monitoring the Power Quality in Electrical Distribution Stations, International Aegean Conference on Electrical Machines and Power Electronics and Electromotion ACEMP'07 and Electromotion'07 Joint Conference, Bodrum, 2007, ISBN:978-1-4244-0890-0, pp. 526-531.


Ai28. CAMPEANU A., RADULESCU M., VLAD I., ENACHE S.: Influence of Cross –Saturation for Modeling and Simulation of the Dynamic Processes in the Induction Motor. EUROCON 2007, Varsovia, Polonia, 9-12 septembrie, 2007, ISBN 978-1- 4244-0812-2, p. 622-625.


Ai29. ENACHE S., PREJBEANU R., CAMPEANU A., VLAD I.: Aspects Regarding Simulation of the Saturated Induction Motors Control by the Voltage Inverter Commanded in Current. EUROCON 2007, Varsovia, Polonia, 9-12 septembrie, 2007, ISBN 978-1- 4244-0812-2, p. 613-616.


Ai30. CAMPEANU, A., IONESCU, A., VLAD, I., ENACHE, S.: Modeling and Simulation of Magnetic Saturation in Induction Motors. International Electric Machines and Drives Conference IEMDC’07, Antalya, Turkey, 3-5 mai, 2007, ISBN:978-1-4244-0742-2, p. 688-693.

___________________________________________________________________________



Ai31. ENACHE, M. A., ENACHE, S., DOBRICEANU, M.: Considerations regarding determination of the induction motors parameters, International Electric Machines and Drives Conference IEMDC’07, Antalya, Turkey, 3-5 mai, 2007, ISBN:978-1-4244-0742-2, pp. 662-667.

https://apps.webofknowledge.com/full_record.do?product=UA&search_mode=GeneralSearch&qid=2&SID=N2jJ9cM1DEJyMvTetGc&page=7&doc=61

Ai32. ENACHE S., VLAD I, ENACHE, M.A. : Aspects Regarding Dynamic Regimes of Induction Motors Control by the Stator Flux, Power Engineering, Energy and Drives, POWERENG 2007, Setubal, Portugal, 12-14 Aprilie 2007, ISBN 978-1-4244-0895-5, pp. 152-155.


Ai33. ENACHE M.A., ENACHE, S., DOBRICEANU, M. : Influences of Induction Motor Parameters on Stability in Case of Operation at Variable Frequency, SYSTEMS THEORY AND SCIENTIFIC COMPUTATION (ISTASC’07), Vouliagmeny, Athens, Greece, August 24-26, 2007, ISSN: 1790-5115, ISBN: 978-960-8457-98-0, p. 113-116.


Ai34. DOBRICEANU, M., BITOLEANU, AL., POPESCU, M., ENACHE, S., SUBTIRELU, E.: Automated Monitoring and Control System for Water Distribution Networks, 6th IASME/WSEAS International Conference on HEAT TRANSFER, THERMAL ENGINEERING and ENVIRONMENT (HTE'08) Rhodes, Greece, August 20-22, 2008. pp. 178-183.


Ai35. ENACHE, S., BITOLEANU, AL., ENACHE, M.A., DOBRICEANU, M.: Stability of Some Driving Systems Analyzed by Means of Roots Geometric Locus, New Aspects of Systems Theory and Scientific Computatuion, Proceedings of the 8th WSEAS International Conference on Systems Theory and Scientific Computation (ISTASC’08), Rhodos, Greece, August 20-22, 2008, ISSN: 1790—2769, ISBN: 978-960-6766-96-1. pp. 106-111.


Ai36. ENACHE, S., ENACHE, M.A., DOBRICEANU, M., DRIGHICIU, M., PETRISOR, A.: Motor Parameters Influence on Stability of Drive for Industrial Robot, 5th International Conference on Informatics in Control, Automation and Robotics ICINCO 2008, Funchar-Madeira (Portugal), May 11-15, 2008.


Ai37. ENACHE S., CAMPEANU A., VLAD I., ENACHE M. A.: Computer tools in electrical engineering education, Iasi, International Conference on Electrica land Power Engineering EPE 2014, ISBN 978-1-4799-5848-1, 2014, pp.194-197.


Ai38. VLAD I., CAMPEANU A., ENACHE S., ENACHE M. A.: Aspects Regarding Optimal Design of Low Power Synchronous Motors, Iasi, International Conference on

___________________________________________________________________________


Electrica land Power Engineering EPE 2014, ISBN 978-1-4799-5848-1, 2014, pp.305-310.


Ai39. ENACHE M.A., CAMPEANU A., ENACHE S., CIMPEANU, T.: Considerations Regarding Modelling, Simulation and Monitoring of Dynamic Regimes for Asynchronous Motors, 2014 International Conference and Exposition on Electrical and Power Engineering EPE 2014, October 16-18, 2014, Iasi, Romania, IEEE Catalog Number CFP1447S-USB, ISBN 978-1-4799-5848-1, pp. 299-304.


Ai40. ENACHE S., CAMPEANU A., VLAD I., ENACHE M. A.: Simulation of Some Particular Dynamic Regimes of Reluctance Synchronous Motors, Craiova, International Conference on Applied and Theoretical Electricity ICATE 2014, ISBN 978-1-4799-4162-9, 2014, pp. 1-6.


Ai41. VLAD I., CAMPEANU A., ENACHE S., ENACHE M. A.: Analysis of Exploitation Cost at Low Power Alternating Current Motors and Optimization Possibilities, Craiova, International Conference on Applied and Theoretical Electricity ICATE 2014, ISBN 978-1-4799-4162-9, pp.1-6.


Ai42. ENACHE M. A., ENACHE S.: Matlab Program for Comparative Study of Some Dynamic Regimes of Asynchronous Motors, Proceedings of the International Conference on Applied and Theoretical Electricity - ICATE 2014, Craiova, Oct. 23-25, 2014, IEEE Catalog No. CFP1499S-USB, ISBN 978-1-4799-4162-9, pp. 1-4.


Ai 43. VLAD I., CAMPEANU A., ENACHE S., ENACHE M. A.: Optimization of low-power brushless direct current motors, The 9th International Symposium on Advanced Topics in Electrical Engineering May 7-9, 2015, Bucharest, Romania, 978-1-4799-7514-3/15/$31.00.


Ai 44. ENACHE, S., CAMPEANU, A., VLAD, I., ENACHE, M. A.: Modelling and Monitoring Aspects Concerning the Vector Controlled Reluctance Synchronous Motor Drives, The 9th International Symposium on Advanced Topics in Electrical Engineering May 7-9, 2015, Bucharest, Romania, 978-1-4799-7514-3/15/$31.00.


6. Articole în reviste şi volumele unor manifestări ştiin Ńifice indexate în alte baze de date internaŃionale

Ab1. ENACHE, M. A., VLAD, I., ENACHE, S., DOBRICEANU, M.: Utilization of Phase

Margin for Analyzing Stability of Asynchronous Motors Supplied by Frequency

___________________________________________________________________________


Converters, Annals of the University of Craiova, Series Electrical Engineering, Year 38, No. 38, 2014, ISSN 1842-4805, pp. 86-92.

http://elth.ucv.ro/fisiere/anale/2014/86.pdf [IndexCopernicus]

Ab2. VLAD, I., CAMPEANU, A., ENACHE, S., TITA, M.: The Study of Asynchronous Motors Behavior in Artificial Load (Part 2), Annals of the University of Craiova, Series Electrical Engineering, Year 37, No. 37, ISSN 1842-4805, 2013, pp. 10-15.

http://elth.ucv.ro/fisiere/anale/2013/P02.pdf [IndexCopernicus]

Ab3. ENACHE, S., CAMPEANU, A., VLAD, I., ENACHE, M.A.: Supply Voltage and Resistant torque Influence on dynamic Characteristic of Reluctance Synchronous Motors, Annals of the University of Craiova, Series Electrical Engineering, Year 37, No. 37, ISSN 1842-4805, 2013, pp. 128-134.

http://elth.ucv.ro/fisiere/anale/2013/P23.pdf\ [IndexCopernicus]

Ab4. ENACHE, S., CAMPEANU, A., VLAD, I.: Aspects Regarding Determination of the Induction Machines Parameters, Analele Universitatii din Craiova, Seria Inginerie Electrică, Anul 35, No. 35, 2011, ISSN 1842-4805, pp. 111-115.


Ab5. VLAD, I., CAMPEANU, A., ENACHE, S., PETROPOL, G.: Establisment of the Optimal Constructive Dimensions for the Asynchronous Motors with Rotor in Cage. Analele Universitatii din Craiova, Seria Inginerie Electrică, Anul 35, No. 35, 2011, ISSN 1842-4805, pp. 128-134.


Ab6. VLAD, I., ENACHE S., ENACHE, M. A.: Constructive Dimensions Optimization in Asynchronous Machines Considering their Starting-up Characteristics. Analele Universitatii din Craiova, Anul 34, No. 34, Vol. II, 2010, ISSN 1842-4805, pp. 161-166

http://elth.ucv.ro/fisiere/anale/2010 [IndexCopernicus]

Ab7. ENACHE, S., VLAD, I.: Contributions regarding the experimental determination of the reluctance synchronous motors inductivities. Analele Universitatii din Craiova, Anul 34, No. 34, Vol. II, 2010, ISSN 1842-4805, pp. 63-66.

http://elth.ucv.ro/fisiere/anale/2010 [IndexCopernicus]

Ab8. ENACHE, S., CAMPEANU, A., VLAD, I., ENACHE, M. A.: Original Method for Stability Analysis of Mechatronic Systems with Asynchronous Machines, WSEAS TRANSACTION on SYSTEMS and CONTROL, Vol. 3, January 2008, ISSN 1991-8763, pp. 19-24.

http://www.wseas.us/e-library/transactions/control/2008/25-188.pdf [Google Scholar, Scopus]

Ab9. ENACHE, S., CAMPEANU, A., VLAD, I., ENACHE, M. A.: Implementation of a Numerical Method for the Stability Analisis of Asynchronous Motors Operating at Variable Frequency, International Journal of Mathematical Models and Methods in Applied Sciences, Issue 4 Vol. I, 2007, ISSN 1998-0140, pp. 269-274.

http://www.naun.org/multimedia/NAUN/ijmmas/mmmas-44.pdf [Google Scholar]

Ab10. ENACHE, S., CAMPEANU, A., VLAD, I., ENACHE, M. A.: Influence of Starting Cage Material upon Dynamic Behaviour of Reluctance Synchronous Motors, (CNAE

___________________________________________________________________________


2014), Analele Universitatii Eftimie Murgu Resita, Fascicula de Inginerie, Anul XXI, nr.2, ISSN 1453-7397, 2014, pp. 27-34.

http://anale-ing.uem.ro/2014/202.pdf [IndexCopernicus]

Ab11. VLAD, I., CAMPEANU, A., ENACHE, S., ENACHE, M. A.: Utility of Numerical Methods in Establishing Performances of Low Power Synchronous Motors, (CNAE 2014), Analele Universitatii Eftimie Murgu Resita,Fascicula de Inginerie, Anul XXI, nr.2, ISSN 1453-7397, 2014, pp. 35-46.

http://anale-ing.uem.ro/2014/203.pdf [IndexCopernicus]

Ab12. VLAD, I., CAMPEANU, A., ENACHE, S., PETROPOL, G. : Optimisation of losses in optimisation of losses in asynchronous motors for general use, Buletinul AGIR, anul XVII, nr. 4, octombrie-decembrie 2012, ISSN ISSN 2247-3548.

http://www.agir.ro/buletine/1509.pdf [IndexCopernicus]

Ab13. ENACHE, S., CAMPEANU, A., VLAD, I., ENACHE, M. A. : Disturbances caused by electrical domestic equipments with universal fractional horsepower motors, Buletinul AGIR, anul XVII, nr. 4, octombrie-decembrie 2012, ISSN 2247-3548.

http://www.agir.ro/buletine/1518.pdf [IndexCopernicus]

Ab14. VLAD, I., ENACHE, S., ENACHE, M. A.: Aspects regarding operation characteristics of brushless direct current motors, Journal of Electrical and Electronic Engineering. Vol. 2, No. 2, ISSN 2329-1613, 2014, pp. 41-46.

http://article.sciencepublishinggroup.com/pdf/10.11648.j.jeee.20140202.12.pdf [Google Scholar]

Ab15. ENACHE, M.A., ENACHE, S., VLAD, I.: Review Article Regarding Possibilities for Speed Adjustment at Reluctance Synchronous Motors, Journal of Electrical and Electronic Engineering, Volume 1, Issue 4, 2013, ISSN 2329-1613, pp. 85-89.

http://article.sciencepublishinggroup.com/pdf/10.11648.j.jeee.20130104.14.pdf [Google Scholar]

Ab16. ENACHE, M. A., CAMPEANU, A., ENACHE, S., VLAD, I.: Particular Aspects Regarding Asynchronous Motors Controlled by Principle of Orientation by Rotor Flux, Annals of the University of Craiova, Series: Automation, Computers, Electronics and Mechatronics, ISSN 1841-0626, Vol. 11 (38), No. 1, 2014, pp. 17-22.

http://ace.ucv.ro/anale/2014_vol1/Annals_of_UCV_vol11_no1_2014.pdf [IndexCopernicus]

Ab17. ENACHE, M. A., ENACHE, S., VLAD, I., SUBTIRELU, G.E.: Particular Transient Regimes of Asynchronous Motors Supplied by PWM Converters, Journal of Electrical and Electronic Engineering, ISSN: 2329-1613 (Print), ISSN: 2329-1605 (Online), Science Publishing Group, New York, USA, Vol. 3, No. 1, 2015, pp. 6-11.

http://www.sciencepublishinggroup.com/journal/paperinfo?journalid=239&doi=10.11648/j.jeee.20150301.12 [Google Scholar]

Ab18. ENACHE, S., CAMPEANU, A., VLAD, I., ENACHE, M. A.: Aspects Regarding Influences of Voltage and Resistant Torque on Asynchronous Motors Operation, Analele Universitatii din Craiova, Seria Inginerie electrica, Year 39, No. 39, Vol. 39, Issue 1, 2015, pp. 119-124.


___________________________________________________________________________


Ab19. VLAD, I., CAMPEANU, A., ENACHE, S., ENACHE, M. A. : Study of Low Power Alternating Current Motors by Functional and Energy Aspect, Analele Universitatii din Craiova, Seria Inginerie electrica, Year 39, No. 39, Vol. 39, Issue 1, 2015, pp. 1, pp. 67-72.


Ab20. ENACHE, S., BITOLEANU, A., ENACHE, M. A., DOBRICEANU, M.: Stability of driving systems with induction motors. A new method of analysis, WSEAS Transactions on Circuits and Systems, 2008, 7 (10), pp. 849-858.

http://www.scopus.com/record/display.uri?eid=2-s2.0-59249102104&origin=resultslist&sort=plf-f&src=s&st1=Enache+S.&nlo=&nlr=&nls=&sid=4D34671266EF9115907D6BA24216E4AA.zQKnzAySRvJOZYcdfIziQ%3a10&sot=b&sdt=b&sl=22&s=AUTHOR-NAME%28Enache+S.%29&relpos=61&citeCnt=3&searchTerm=AUTHOR-NAME%28Enache+S.%29 [Scopus]

Ab21. ENACHE, M.A., ENACHE, S., DOBRICEANU, M.: About Stability of Mechatronic Systems Driven by Asynchronous Motors, WSEAS Transaction on Circuits and Systems, Issue 1, Volume 7, January 2008, ISSN: 1109-2734, pp. 32-38.

http://www.wseas.us/e-library/transactions/circuits/2008/25-189.pdf

http://www.scopus.com/record/display.uri?eid=2-s2.0-44949187776&origin=resultslist&sort=plf-f&src=s&st1=Enache+S.&nlo=&nlr=&nls=&sid=4D34671266EF9115907D6BA24216E4AA.zQKnzAySRvJOZYcdfIziQ%3a10&sot=b&sdt=b&sl=22&s=AUTHOR-NAME%28Enache+S.%29&relpos=76&citeCnt=2&searchTerm=AUTHOR-NAME%28Enache+S.%29 [Scopus]

Ab22. DOBRICEANU, M., BITOLEANU, AL., POPESCU, M., ENACHE, S., SUBTIRELU, E.: SCADA System for Monitoring Water Supply Networks, WSEAS Transaction on Systems, Issue 10, Volume 7, October 2008, ISSN: 1109-2777.

http://www.wseas.us/e-library/transactions/systems/2008/28-196.pdf [Google Scholar]

AB23. CAMPEANU, A., VLAD, I., IONESCU, A., ENACHE, S.: Establisement of Electrical Machines Optimum Constructive Dimensions, Electromotion, vol. 10, no. 3, p. 187-193, July-Sept. 2003, INSPEC Material Identity Number F171-2004-001, Inspec classification codes B8310a.c. machines, B8320 d.c. machines – B0260 Optimisation techniques.

http://www.engineeringvillage2.org/controller/servlet [Inspec]

Ab24. CAMPEANU, A., VLAD, I., ENACHE, S.: Aspects Regarding Optimal Design of High Power Electrical Machines, Braşov, Journal of Electrical Engineering, vol. 2, no. 2, 2002, INSPEC Material Identity Number D115-2002-002, Inspec classification codes B8310 a.c. machines, B8320 d.c. machines.

http://www.engineeringvillage2.org/controller/servlet [Inspec]

Ab25. ENACHE, S., CAMPEANU, A., ENACHE, M.A., IVANOV, S.: E-learning Tools for Education in Asynchronous Machines, WSEAS Transaction on Advances in Engineering Education, Issue 11, Volume 4, November 2007, ISSN: 1790-1979, pp. 238-241.

http://wseas.us/e-library/transactions/education/2007/30-547N.pdf [Google Scholar]

___________________________________________________________________________


Ab26. VLAD, I., ENACHE, S., ENACHE, M. A., SMARANDESCU, I.: Energy Aspects at High Power Wounded Rotor Motors Startup, International Journal of Mathematical Models and Method in Applied Sciences, ISSN: 1998-0140, Volume 10, 2016, pp. 143-151. [SCOPUS].

http://www.naun.org/main/NAUN/ijmmas/2016/a342001-002.pdf

Ab27. VLAD, I., CAMPEANU, A., ENACHE, S., AUGUSTINOV L., PETROPOL G.: Establishing the Optimal of Electromagnetical Solicitations for Traction Motors, 20-th International Symposium on Power Electronics, Electrical Drives, Automation and Motion SPEEDAM 2010, Pisa (Italy), 14-16 June, ISBN: 978-1-4244-4986-6, 2010, pp. 1591-1596.

http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=5545017 [IEEE Xplore]

Ab28. CAMPEANU, A., VLAD I., ENACHE, S., CAUTIL I., AUGUSTINOV L., PETROPOL G.: Simulation of Dynamical Processes Specific to Asynchronous Traction Motors, 20-th International Symposium on Power Electronics, Electrical Drives, Automation and Motion SPEEDAM 2010, Pisa (Italy), 14-16 June, ISBN: 978-1-4244-4986-6, 2010, pp. 872-877.


Ab29. ENACHE, M.A., CAMPEANU, A., VLAD, I., ENACHE, S.: Study of dynamic regimes for low power direct current motors, 13th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM), 2012, ISSN 978-1-4673-1650-7, 2012, pp. 692 – 697.

http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6231828&tag=1 [IEEE Xplore]

Ab30. ENACHE, S., CAMPEANU, A., VLAD, I., ENACHE, M.A. : Influence of the filtration circuit parameters of an induction motor drive on stability, 13th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM), 2012, ISSN 978-1-4673-1650-7, 2012, pp. 665 – 670.


Ab31. VLAD, I., CAMPEANU, A., ENACHE, S., ENACHE, M.A. : Aspects regarding optimal design of high power squirrel cage asynchronous motors, 13th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM), 2012, ISSN 978-1-4673-1650-7, 2012, pp. 503 – 508.


Ab32. VLAD, I., ENACHE, S., ENACHE, M. A.: Design Optimization for Low Power Asynchronous Motors Used in Medical Equipments. RECENT RESEARCHES in ELECTRIC POWER and ENERGY SYSTEMS, Proceedings of the 13th International Conference on Electric Power Systems, High Voltages, Electric Machines (POWER '13), Proceedings of the 1st International Conference on Power and Energy Systems (POES '13), Chania, Crete Island, Greece, ISSN 978-960-474-328-5, 2013, p. 192-197.

http://www.wseas.us/e-library/conferences/2013/Chania/POW/POW-30.pdf [Google Scholar]

Ab33. CAMPEANU, A., VLAD, I., ENACHE, S.: Utilization Numerical Methods in Study of Distorting Regime of Direct Current Motors Associated with Static Converters. Dubrovnik, 13-th International Conference on Electrical Drives and Power Electronics, EDPE 2005, 26-28 September, Dubrovnik, Croatia, ISBN -953-6037-43-2, 2005.

http://www.edpe.sk/edpe_data/EDPE_2005/files/E05-83.pdf [Google Scholar]

___________________________________________________________________________


Ab34. ENACHE, S., VLAD, I., ENACHE M.: Considerations Regarding Command of Reluctance Synchronous Motors, 13-th International Symposium on Power Electronics Ee2005, Novi Sad, Serbia si Muntenegru, ISBN 86-85211-54-9, CD version, Paper No. T3-2.2.

http://www.stari.ftn.uns.ac.rs/dee/papers/Ee2005/papers/T3/T3-2/T3-2.2_061.pdf [Google Scholar]

Ab35. ENACHE, S., CAMPEANU, A., VLAD, I., ENACHE, M. A.: Considerations Regarding Asynchronous Motors Control by the Stator Flux, Proceedings of 3rd International Symposium on Electrical Engineering and Energy Converters, Suceava, 24-25 September 2009, ISSN 2066-853X, pp. 185-188.

http://www.els.usv.ro/pagini/past_editions/ELS%202009/C2.10_ENACHE%20Sorin.pdf [Google Scholar]

Ab36. VLAD, I., ENACHE, S., ENACHE, M. A., SMARANDESCU, I.: Study on Starting the High Power Induction Motors with Wounded Rotor, Proceedings of the International Conference on Mathematical Models and Methods in Applied Sciences (MMMAS 2015), Agios Nikolaos, Crete, Greece, October 17-19, 2015, pp. 174.

http://www.inase.org/library/2015/crete/AME.pdf [Scopus]

7. Articole în reviste şi volumele unor manifestări ştiin Ńifice recunoscute neindexate

An1. ENACHE, S., VLAD, I., ENACHE, M. A.: Aspects Regarding Sudden Short Circuit of

Synchronous Generators, Analele UniversităŃii din Craiova, Seria: Inginerie electrică, Anul 26, nr. 26, 2002, ISSN 1223-530 X, pp. 97-103.

An2. ENACHE, S., VLAD, I., ENACHE, M. A.: Implications of Asynchronous Motor Inductances Modification on Stability for Variable Frequency Supply, Analele UniversităŃii din Craiova, Seria: Inginerie electrică, Anul 26, nr. 26, 2002, ISSN 1223-530 X, pp. 103-110.

An3. VLAD, I., ENACHE, S., ENACHE, MONICA: Aspects Regarding the Commutation of Direct Current Machines with Multiple Windings, Analele Facultătii de Inginerie Hunedoara, Universitatea "Politehnica" Timişoara, 2003, Tomul II, Fascicola 2, ISSN 1454-6531, pp. 45-50.

An4. ENACHE, S., VLAD, I., ENACHE, MONICA : Considerations Regarding Dynamic Behaviour of Induction Motor with Vector Control, ACTA ELECTROTEHNICA, Cod CNCSIS 576, Volume 44, Number 3, Cluj-Napoca, 2004, ISSN 1224-2497, pp.157-160.

An5. VLAD, I., ENACHE, S., PETROPOL, GABRIELA : Energetic Aspects Regarding Operations of Direct Current Motors Fed by Static Converters, ACTA ELECTROTEHNICA, Cod CNCSIS 576, Volume 44, Number 3, Cluj-Napoca, 2004, ISSN 1224-2497, pp.107-110.

An6. ENACHE, S., ALEXANDRU, D., ENACHE, MONICA: Aspects Regarding Operation of Universal Fractional-HorsePower Commutator Motors, Buletinul Institutului Politehnic din Iasi, Tomul L(LIV), Fasc. 5C, Electrotehnica-Energetica-Electronica, Iasi, Cod CNCSIS 87, 2004, ISSN 1223-8139, pp. 1289-1294.

An7. ALEXANDRU, D., ENACHE, S., DEGERATU, S., GAVRILA, M.: Determination of Effects Upon Induction Motors Supplied by Voltage Converters, Buletinul Institutului Politehnic din Iasi, Tomul L(LIV), Fasc. 5C, Electrotehnica-Energetica-Electronica, Iasi, Cod CNCSIS 87, 2004, ISSN 1223-8139, pp. 945-952.

___________________________________________________________________________


An8. CAMPEANU, A., VLAD, I., ENACHE, S.: Quantitive Consequences of Upsetting and Saturation on Behaviour of Asynchrones Machines, Buletinul Institutului Politehnic din Iasi, Tomul L(LIV), Fasc. 5C, Electrotehnica-Energetica-Electronica, Iasi, 2004, ISSN 1223-8139, pp. 1289-1294.

An9. ENACHE, S., VLAD, I., ENACHE, M. A.: Stand for Tests of Low Power Asynchronous Motors, Analele Universitatii din Craiova, Seria Inginerie electrica, Anul 27, nr. 27, Volumul II – Electrotehnica si Electromecanica 2003 (aparut in 2004), pp. 25-30, ISSN 1223-530X.

An10. VLAD, I., ENACHE, S.: Quantitative Effects of Upsetting and Saturation Upon the Asynchronous Motors Behaviour, Analele Universitatii din Craiova, Seria Inginerie electrica, Anul 27, nr. 27, Volumul II – Electrotehnica si Electromecanica 2003 (aparut in 2004), pp. 19-24, ISSN 1223-530X.

An11. VLAD, I., ENACHE, S., PETROPOL G.: Using the Numerical Methods in the Study og Magnetic Field of the Machines of Alternative Current, Buletinul UniversităŃii Petrol-Gaze din Ploieşti, 2006, ISSN 1224-8495, p. 289-295.

An12. ENACHE, S., VLAD I., ENACHE, M. A.: Aspects Regarding Methods for Determination of Reluctance Synchronous Motor Parameters. Ploieşti, Buletinul UniversităŃii Petrol-Gaze din Ploieşti, ISSN 1224-8495, p. 65-71.

An13. CAMPEANU, A., VLAD, I., ENACHE, S.: Utilisation of Numerical Methods in Asynchronous Motors Optimal Design, Buletinul Institutului Politehnic din Iasi, Seria III (Electrotehnica, Energetica, Electronica), 2006, Tomul LII (LVI), Fasc. 5A, p. 209.

An14. ENACHE, S., VLAD, I., ENACHE, M. A.: Considerations Regarding Asynchronous Starting of Reluctance Synchronous Motors, Buletinul Institutului Politehnic din Iasi, Seria III (Electrotehnica, Energetica, Electronica), 2006, Tomul LII (LVI), Fasc. 5A, p. 311.

An15. VLAD I., ENACHE S.: Study of the Magnetic Field of the D.C. Machine using Numerical Methods, SIELMEN’07, Analele UniversităŃii din Craiova, Seria: Inginerie electrică, Anul 31, nr.31, Vol.II, 2007, ISSN 1842-4805, p.130-133.

An16. ENACHE, S., VLAD, I.: Test Bench for Reluctance Synchronous Motors, SIELMEN’07, Analele UniversităŃii din Craiova, Seria: Inginerie electrică, Anul 31, nr.31, Vol.II, 2007, ISSN 1842-4805, p. 122-125.

An17. ENACHE, S., VLAD, I., ENACHE, M. A.: Aspects Regarding Stability of Drives with Asynchronous Motors, Scientific Bulletin of the „POLITEHNICA” University of Timisoara, Transaction of Power Engineering, 2008, Tom 53(67), pp. 113, ISSN 1582-7194.

An18. VLAD, I., ENACHE, S., PETROPOL, G. : Aspects Regarding Asynchronous Starting of Reluctance Synchronous Motors, Scientific Bulletin of the „POLITEHNICA” University of Timisoara, Transaction of Power Engineering, 2008, Tom 53(67), pp. 109, ISSN 1582-7194.

An19. ENACHE, S., CAMPEANU, A., VLAD, I., ENACHE, M. A.: Considerations Regarding Infuences of Reluctances Synchronous Motors Parameters on the Asynchronous Starting, SIELMEN’09, Analele UniversităŃii din Craiova, 2009, Nr.33, Anul 33, ISSN 1842-4805, pp. 90-96.

An20. VLAD, I., CAMPEANU, A., ENACHE, S., PETROPOL, G.: Energetical and Operational Considerations at Direct Current Motors Associated with Static Converters. SIELMEN’09, Analele UniversităŃii din Craiova, 2009, Nr.33, Anul 33, ISSN 1842-4805, pp. 202-208.

An21. ENACHE, S., VLAD, I.: Oscillations of Induction Motor in the Case of Frequency Saltus Variation, în Analele UniversităŃii din Craiova, seria Inginerie electrică, anul 19, nr.19, 1995, p. 7-81.

___________________________________________________________________________


An22. VLAD, I., ENACHE, S.: Aspects Regarding Optimized Designing of Direct Current Machines, în Analele UniversităŃii din Craiova, seria Inginerie electrică, anul 19, nr.19, 1995, p. 101-108.

An23. ALEXANDRU, D., VLAD, I., ENACHE, S.: Aspects Regarding Optimal Designing of Asynchronous Motors Used in Electrical Traction, în Analele UniversităŃii din Craiova, seria Inginerie electrică, anul19, nr.19, 1995, p. 49-55.

An24. ENACHE, S., VLAD, I.: ParticularităŃi de proiectare ale maşinilor de curent continuu cu regimuri grele de functionare, în Analele Universitatii "Eftimie Murgu" ResiŃa, sesiunea jubiliară "Un sfert de veac de la fondarea învatamantului superior la Resita", fascicola III, anul III, 1996, p. 255-260.

An25. VLAD, I., ENACHE, S.: Consideratii privind caracteristicile de functionare ale motoarelor de curent continuu, în Analele UniversităŃii "Eftimie Murgu" ResiŃa, sesiunea jubiliară "Un sfert de veac de la fondarea învăŃământului superior la ResiŃa", fascicola III, anul III, 1996, p. 249-254.

An26. ENACHE, S., VLAD, I. : On Behaviour of Induction Motors Suplied from Voltage Frequency Static Converters with Duration Modulation, în Analele UniversităŃii din Craiova, 1996, ISSN 1223-530X, seria Inginerie electrică, p. 113-118.

An27. VLAD, I., ENACHE, S.: Influence of the Auxiliary Pole Constructive Shape on Commutation Process at Direct Current Machines, în Analele UniversităŃii din Craiova, 1996, ISSN 1223-530X, seria Inginerie electrică, p. 221-226.

An28. ENACHE, S., VLAD, I., ALEXANDRU D. : Procese dinamice la variaŃia în salt a frecvenŃei tensiunii de alimentare a motorului de inducŃie, în Analele UniversităŃii din Oradea, fascicola Electrotehnică, 1997, p. 29-34.

An29. VLAD, I., ENACHE, S., ALEXANDRU, D.: Comportarea în regim tranzitoriu a motorului de curent continuu derivaŃie în cazul considerării saturaŃiei, în Analele UniversităŃii din Oradea, fascicola Electrotehnică, 1997, p. 89-94.

An30. ALEXANDRU, D., VLAD, I., ENACHE, S.: ConsideraŃii privind proiectarea masinilor asincrone alimentate de la convertoare statice de frecventă, în Analele UniversităŃii din Oradea, fascicola Electrotehnică, 1997, p. 11-16.

An31. ENACHE, S., VLAD, I., ALEXANDRU, D : About Induction Machine Stability Operating at Variable Frequency, în "ACTA UNIVERSITATIS CIBINIENSIS", Seria Tehnică, Sibiu, 1997, p. 151-156.

An32. VLAD, I., ENACHE, S., D. ALEXANDRU: Considerations Regarding Operation and Mechanical Characteristics of the Direct Current Motors, în "ACTA UNIVERSITATIS CIBINIENSIS", Seria Tehnică, Sibiu, 1997, p. 163-168.

An33. ALEXANDRU, D., VLAD, I., ENACHE, S.: About Optimal Design of Asynchrounous Motors Used in Electrical Traction, în "ACTA UNIVERSITATIS CIBINIENSIS", Seria Tehnică, Sibiu, 1997, p. 145 - 150.

An34. ENACHE, S., VLAD, I., ALEXANDRU, D.: Using Algorithm Complex to Determine the Induction Machine Parameters, în Analele UniversităŃii din Craiova, seria Inginerie electrică, anul 21, nr. 21, 1997, p. 132-141.

An35. VLAD, I., ENACHE, S., ENACHE, MONICA : Study of the Transient Regime for Separated Excited Direct Current Motors, în Analele UniversităŃii din Craiova, seria Inginerie electrică, anul 21, nr. 21, 1997, p. 226-233.

An36. VLAD, I., ENACHE, S.: Metods and Criterions in Optimal Design of the Electrical Machines, în Analele UniversităŃii din Craiova, Seria Inginerie electrică, anul 25, nr. 25, 2001, Editura Universitaria, ISSN 1223-530X, , p. 76-83.

An37. ENACHE, S., VLAD, I., ENACHE, MONICA: Efectele parametrilor regulatorului de flux asupra stabilităŃii motorului de inductie comandat vectorial, în Analele FacultăŃii de

___________________________________________________________________________


Inginerie din Hunedoara, Universitatea "Politehnica" Timişoara, 1999, ISSN 1454 - 6531, p. 17-22.

An38. ENACHE, S., VLAD, I., ENACHE, M. A.: Study Regarding Filtration Inductivity Influence Upon the Stability of the Converter-Induction Motor Assembly, Analele FacultăŃii de Inginerie Hunedoara, Universitatea "Politehnica" Timişoara, 2000, Anul 2, Fascicola 2, ISSN 1454-6531, p. 51-54.

An39. ENACHE, S., VLAD, I., ENACHE, MONICA: Using Matlab for Simulation of the Induction Motor Behaviour Controlled by the Rotor Flux with the Implementation of on Inverter Voltage Sourse, Analele UniversităŃii Aurel Vlaicu Arad, fascicolele Electrotehnica, Electronica, Automatica, 2000, ISSN 1582-3377, p. 123-126.

An40. ENACHE, S., VLAD, I., ENACHE, M. A.: Computerized Micro-stand for the Study of Asynchronous Motor Operation, Craiova/Băile Herculane, International Conference on Applied and Theoretical Electricity ICATE 2002, ISBN 973-8043-169-9, pp. 121-125.

An41. VLAD, I., ENACHE, S.: Influence of Reaction Field upon Dynamic Regime of Separately Excited Direct Current Motor, Craiova/Băile Herculane, International Conference on Applied and Theoretical Electricity ICATE 2002, ISBN 973-8043-169-9, pp. 109-115.

An42. VLAD, I., ENACHE, S.: Influence of Electromagnetic Stresses in Optimal Design of Electrical Machines, GalaŃi, 11-th National Conference on Electric Drives, CNAE 2002, Proceedings, pp. 355-359.

An43. ENACHE, S., VLAD, I.: Program for Monitoring of Synchronous Generator Sudden Short-Circuit, The 4th International Conference on Electromechanical and Power Systems, Chisinau, Moldova, 2003, vol. II, ISBN 9975-9771-1-1, pp. 269-272.

An44. VLAD, I., ENACHE S.: Aspects Regarding Operation of Direct Current Motors Fed by Static Converters, The 4th International Conference on Electromechanical and Power Systems, Chisinau, Moldova, 2003, vol. II, ISBN 9975-9771-1-1, pp. 229-232.

An45. ENACHE, S., VLAD, I., ENACHE, MONICA: Modelling and Simulation of Particular Transient Regimes of Asynchronous Motor, Proceedings of The International Conference "Modern Technologies in The XXI Century", Military Technical Academy of Bucharest, 6-7 November 2003, (CD version), pp. 1-26.

An46. VLAD, I., ENACHE, S.: Considerations Regarding Simulation of Direct Current Motors Operation, Proceedings of The International; Conference "Modern Technologies in The XXI Century", Military Technical Academy of Bucharest, 6-7 November 2003, (CD version), pp. 52-57.

An47. ENACHE, S., VLAD, I. : Aspects Regarding Determination of the Induction Motors Parameters with the Algorithm Simplex, Proceedings of International Aegean Conference on Electrical Machines and Power Electronics, Istanbul, Turcia, 2004, ISBN 975-93410-1-8, pp. 420-425.

An48. ENACHE, S., VLAD, I., ALEXANDRU, D., ENACHE, M. A.: Considerations Concerning Electromagnetic Compatibility of Universal Fractional-HorsePower Commutator Motors, SIELA 2005, Plovdiv, Bulgaria, p. 82-87, ISBN 954-90209-4-0.

An49. VLAD, I., ENACHE, S., PETROPOL, G.: Considerations on Deformed Regime for D.C. Motors fed by Static Inverters, SIELA 2005, Plovdiv, Bulgaria, pp. 225-230, ISBN 954-90209-4-0.

An50. ENACHE, S., VLAD, I., ENACHE M. A.: Considerations Regarding Influences of Induction Motor Resistances upon Stability in case of Operation at Variable Frequency. Chisinau, "5-th International Conference on Electromecanical and Power Systems", SIELMEN, Vol.2, ISBN GEN 973-716-208-0, 2005, pp. 660-663.

___________________________________________________________________________


An51. VLAD, I., ENACHE, S.: Considerations on Distorting Regime for D.C. Motors fed by Static Converters. Chisinau, "5-th International Conference on Electromecanical and Power Systems", SIELMEN, Vol.2, ISBN GEN 973-716-208-0, 2005, pp. 593-596.

An52. NICA, C., ENACHE, S., ENACHE, M. A.: About Currents from the Damping Winding Bars of Three-phase Synchronous Generator Connected on Rectifier, CD version PSA2-2, Book of Abstracts, XVII International Conference on Electrical Machines (ICEM06), Chania, Crete Island, Greece, 2-5 septembrie, 2006, p. 22.

An53. ENACHE S., CAMPEANU, A., VLAD, I., ENACHE, M. A.: A new Posibility for the Determination of the Induction Machines Parameters, CD version PSA3-3, Book of Abstracts, XVII International Conference on Electrical Machines (ICEM06), Chania, Crete Island, Greece, 2-5 septembrie, 2006, p. 60.

An54. VLAD, I., CAMPEANU, A., ENACHE S.: Study of Dynamic Regimes at Direct Current Motors by Numerical Methods, CD version PMA4-1, Book of Abstracts, XVII International Conference on Electrical Machines, Chania, Crete Island, Greece, 2-5 septembrie, 2006, p. 328.

An55. ENACHE, S., CAMPEANU, A., VLAD, I., ENACHE, M. A.: Simulation of Some Disturbances Influence on Dynamic Behaviour of Reluctance Synchronous Motors, The 9-th International Conference on Electromechanical and Power Systems, SIELMEN 2013, Chişinau, 16-18 octombrie, ISBN 978-606-13-1560-4, 2013, pp. 245-249.

An56. VLAD, I., CAMPEANU, A., ENACHE, S., TITA, M.: The study of asynchronous motors behavior in artificial load (Part 1), The 9-th International Conference on Electromechanical and Power Systems, Chişinau, SIELMEN 2013, CD Proceedings - ISBN 978-606-13-1560-4, 2013, pp. 253-257.

An57. ENACHE, M. A., ENACHE, S.: Theoretical aspects regarding static stability of reluctance synchronous motors, The 9-th International Conference on Electromechanical and Power Systems, Chişinau, SIELMEN 2013, CD Proceedings - ISBN 978-606-13-1560-4, 2013.

An58. ENACHE, S., CAMPEANU, A., VLAD, I., ENACHE, M. A.: Dynamic Regimes of Asynchronous Motors Caused by Some Disturbances, Proceeding of SIELMEN 2015, Chisinau, Moldova, ISBN 978-606-567-284-0, pp. 245-248.

An59. VLAD, I., CAMPEANU, A., ENACHE, S., ENACHE, M. A.: Analysis of Operation Characteristics of Alternating Current Motors Rated at Low Powers and Energetic Consumptions, Proceedings of SIELMEN 2015, Chisinau, Moldova, ISBN 978-606-567-284-0, pp. 256-259.

An60. VLAD, I., ENACHE, S.: Harmonic Analysis of Nesinusoidal Quantities. Study of Unloaded Working Current of Power Transformers Group, in Proceedings of the International Conference on Applied and Theoretical Electrotechnics, session C-D, Craiova, 1993, p. 243-250.

An61. ENACHE, S., VLAD, I.: Dinamic Regime of Direct Current Motor with Separate Excitation in Saturation Consideration Case, în Proceedings of The International Conference on Applied and Theoretical Electrotechnics, Craiova, June 6-7, 1996, vol. III, p. 118-123.

An62. VLAD, I., ENACHE, S.: Transient Regime Behaviour of Excitation Winding at Direct Current Machine with Saturation Consideration, în Proceedings of The International Conference on Applied and Theoretical Electrotechnics, Craiova, June 6-7, 1996, vol. III, p. 135-140.

An63. ENACHE, S., VLAD, I., ALEXANDRU, D. : Aspects Regarding Induction Machine Stability in the Case of Frequency Modification, în The 9 th Simposium on Modelling, Simulation and Identification Systems, volume 2, GalaŃi, Romania, 24 - 15 october,1996, p. 6-11.

___________________________________________________________________________


An64. VLAD, I., ENACHE, S., ALEXANDRU, D. : Aspects Regarding Optimization of the Comutation Process at Direct Current Machines, în The 9 th Simposium on Modelling, Simulation and Identification Systems, volume 2, GalaŃi, Romania, 24 - 15 october,1996, p. 1-5.

An65. ENACHE, S., VLAD, I., ALEXANDRU, D. : Considerations Regarding Behaviour the Induction Machine Supplied from VFSC with Amplitude Modulation, în lucrările ConferinŃei naŃionale de electromecanică minieră CNEM '97, ediŃia I, Petroşani, 30-31 mai 1997, p. 31-36.

An66. VLAD, I., ENACHE, S., ALEXANDRU, D.: New Aspects Regarding the Auxiliary Poles Dimensioning and Construction for Direct Current Machines Operating in Heavy Conditions, în lucrările ConferinŃei naŃionale de electromecanică minieră CNEM '97, ediŃia I, Petroşani, 30 - 31 mai 1997, p. 41-46.

An67. ENACHE, S. : Sistem computerizat pentru monitorizarea regimurilor dinamice ale masinilor electrice, ConferinŃa InternaŃională SIELMEC '97, 16 - 18 octombrie 1997, volumul I, Chisinău, Moldova, p. 201-204.

An68. CAMPEANU, A., ENACHE, S.: O nouă metodă de determinare a parametrilor maşinii de inducŃie, ConferinŃa InternaŃională SIELMEC '97, 16 - 18 octombrie 1997, volumul I, Chişinău, Moldova, p. 241-244.

An69. ENACHE, S.: Simulink use for the Analysis of Induction Motor Transient Regime at Variable Frequency, în Lucrările celei de-a XXVII-a Sesiune de comunicări stiinŃifice cu participare internaŃională, Academia Tehnică Militară, Bucureşti, 13-14 noiembrie 1997, p. 43-50.

An70. ENACHE, S., VLAD, I.: Study of the Induction Machine Operation at Variable Frecquency by Using Matlab, în lucrările ediŃiei a IV-a a Sesiunii de Comunicări ştiinŃifice "25 de ani de învăŃămant tehnic superior arădean", 30-31 octombrie, Arad, 1997, ISBN 973-98365-8-5, p. 151-156.

An71. VLAD, I., ENACHE, S.: Aspects Regarding Oscillations of the Induction Motor Operating with Variable Frecquency, în lucrările ediŃiei a IV-a a Sesiunii de Comunicări stiinŃifice "25 de ani de învăŃământ tehnic superior arădean", Arad, 30-31 octombrie 1997, ISBN 973-98365-8-5, p. 157-162.

An72. ENACHE, S.: ConsideraŃii privind stabilitatea motoarelor de inducŃie alimentate de la CSTF, Sesiunea de comunicări stiinŃifice Hunedoara, Universitatea "Politehnica" Timişoara, 31 octombrie - 1 noiembrie 1997, p. 464-467.

An73. ENACHE, S., VLAD, I., ALEXANDRU, D. : Studiu privind influenŃa parametrilor motoarelor de inducŃie de pe autoturismele electrice asupra stabilităŃii, în Lucrările celei de-a VI-a ConferinŃe de autovehicule rutiere cu participare internaŃională CAR '97, vol. E, Piteşti, 21-23 noiembrie 1997, p. 87-92.

An74. VLAD, I., ENACHE, S., ALEXANDRU, D. : Aspecte privind construcŃia si performanŃele electromotoarelor pentru autoturisme, în Lucrările celei de-a VI-a ConferinŃe de autovehicule rutiere cu participare internaŃională CAR '97, vol. E, Piteşti, 21-23 noiembrie 1997, p. 31-36.

An75. ENACHE, S., VLAD, I.: Consideration Regarding Influence of the Induction Motors Parameters on Stability in the Case of Operation at Variable Frequency, International Conference on Automation and Quality Control, 28-29 mai 1998, Cluj-Napoca, vol. Q, ISBN 973-9358-15-2, p. Q438-Q443.

An76. ENACHE, S., VLAD, I.: Program for Study of Electrical Machines Dynamic Regimes, în Proceedings of The International Conference on Applied and Theoretical Electrotechnics, Craiova, June 4-6, 1998, vol. III, ISBN 973-9346-49-9, pg. 59-64.

___________________________________________________________________________


An77. VLAD, I., ENACHE, S. : Influence of the Electromagnetic Stresses on Optimizing of the Electrical Machines Performances, in Proceedings of the International Conference on Applied and Theoretical Electrotechnics, Craiova, June 4-6, 1998, vol. III, ISBN 973-9346-49-9, pg. 157-162.

An78. ENACHE, S., VLAD, I, ENACHE, MONICA: Aspects Regarding the Filtration Capacity Influence on the Stability of the FVSC - Induction Motor Assembly, în Proceedings of the 9-th National Conference on Electrical Drives CNAE'98, Craiova, 8-9 octombrie 1998, ISBN 973-9346-68-5, p. 129-132.

An79. VLAD, I., ENACHE, S., ENACHE, M. A. : Aspects Regarding the Establishment of the Ampere-Turns Curve for Alternating Current Windings, în Proceedings of the 9-th National Conference on Electrical Drives CNAE'98, Craiova, 8-9 octombrie 1998, ISBN 973-9346-68-5, p. 107-110.

An80. CAMPEANU, A., ENACHE, S., VLAD, I.: Conclusions Regarding Implications of the Induction Motors Parameters on Stability in the Case of Static Converters Supply, în proceedings of ELECTROMOTION '99, 1999, Patras, Grecia, p. 373-378.

An81. VLAD, I., ENACHE, S.: Aspecte privind proiectarea optimală a masinilor electrice de tractiune, în Lucrările stiinŃifice ale Simpozionului NaŃional de Electrotehnică ELECTRO'99, Craiova, 27-28 august 1999, ISBN 973-0-00898-1, p. 201-205.

An82. ENACHE, S., VLAD, I., ENACHE, MONICA : Analysis the Induction Motor Stability when Using Command on the Field Orientation Principle, în Lucrările ConferinŃei "A XXVIII-a Sesiune de Comunicări stiinŃifice cu participare InternaŃională 21-22 octombrie 1999", Academia Tehnică Militară, Bucureşti, p. 126-133.

An83. VLAD, I., ENACHE, S., ENACHE, MONICA: Magnetic Stresses Influence in Optimal Design of Electrical Machines, în Lucrările ConferinŃei "A XXVII-a Sesiune de Comunicări stiinŃifice cu participare InternaŃională, 21-22 octombrie 1999", Academia Tehnică Militară, Bucureşti, p. 118-125.

An84. ENACHE, S., VLAD, I.: Consideratii privind modelarea sistemelor de actionare cu motoare de inductie si comandă vectorială, în Lucrările celei de-a doua conferinŃe internaŃionale de sisteme electromecanice SIELMEC '99, Chisinău, 8-9 octombrie 1999, ISBN 9975-944-30-2. p. 153-156.

An85. VLAD, I., ENACHE, S.: Consideratii privind proiectarea optimală a masinilor electrice, în Lucrările celei de-a doua conferinŃe internaŃionale de sisteme electromecanice SIELMEC '99, Chisinău, 8-9 octombrie 1999, ISBN 9975-944-30-2, p. 23-26.

An86. ENACHE, S., VLAD, I.: Matlab-Simulink Models of Induction Machine, Proceedings on the ICATE 2000-SCC 7, Craiova, ISBN 973-657-005-3, p. 364-369.

An87. VLAD, I., ENACHE, S.: Analysis of the Commutation Process to Direct Current Machines with Special Uses, Proceedings on the ICATE 2000-SCC 7, Craiova, ISBN 973-657-005-3, p. 400-405.

An88. NICA, C., ENACHE, S., ENACHE, MONICA: Experimental Determination Regarding Behaviour of the Three-Phase Synchronous Generator-Controlled Bridge Rectifier System, Proceedings on the ICATE 2000-SCC 7, Craiova, ISBN 973-657-005-3, p. 382-387.

An89. CAMPEANU, A., ENACHE, S., VLAD, I.: Analysis of dynamic States in Saturated Induction machines when Usind as State Variables, PCIM 2001, Nurenberg, Germania, p. 56.

An90. ENACHE, S., VLAD, I., ENACHE, MONICA: Aspecte privind regimurile dinamice ale motoarelor de inductie comandate vectorial, A Treia Conferinta Internationala de Sisteme Electromecanice şi Energetice, Chisinau, Moldova, 2001, p. 165-168.

___________________________________________________________________________


An91. VLAD, I., ENACHE, S.: Aspecte privind optimizarea constructiei polilor auxiliari la masinile de curent continuu, A Treia Conferinta Internationala de Sisteme Electromecanice si Energetice, Chişinau, Moldova, 2001, p. 43-46.

An92. ENACHE, S., VLAD, I., ENACHE, MONICA: Concluzii privind simularea functionării motorului de inductie controlat după fluxul rotoric, a XXIX-a Sesiune de comunicari stiintifice cu participare internationala "Tehnologii moderne in secolul XXI", Academia Tehnică Militară, Bucureşti, 2001, ISBN 973-8290-27-9, p. 114-119.

An93. VLAD, I., ENACHE, S.: Aspecte privind modelarea motoarelor de curent continuu , a XXIX-a Sesiune de comunicari stiintifice cu participare internationala "Tehnologii moderne în secolul XXI", Academia Tehnică Militară, Bucureşti, 2001, ISBN 973-8290-27-9, p. 108-113.

8. Contracte de cercetare ştiin Ńifică

8.1. InternaŃionale

Pi1. Comisia Europeană - PC6 STREP AST5-CT2006-030841, 2005-2008: DRESS - Distributed and Redundant Electromechanical nose gear Steering System. Parteneri Messier-Bugatti, FranŃa; SAAB AB, Suedia; Airbus, Marea Britanie; Messier-Dowty, FranŃa; Institut National des Sciences Appliquées de Toulouse, FranŃa; Universite Catholique de Louvain, Belgia; Universitatea din Craiova, România; Université de Haute Alsace, FranŃa; Budapest University of Technology and Economics, Ungaria; TTTechComputertechnik AG, Austria; Equipaero, FranŃa; Stridsberg Powertrain AB, Suedia; Institute of Aviation, Polonia. Director Universitatea din Craiova: prof. dr. ing. Sergiu IVANOV (membru in echipa).

Pi2. Comisia Europeană - SOCRATES-MINERVA 109789-CP-1-2003-1-BE-MINERVA-M 2003-2005: eLEE „e-Learning tools for Electrical Engineering”. Parteneri Université Catholique de Louvain (UCL), Louvain-la-Neuve, Belgia, Ecole des Hautes Etudes d’Ingenieurs (HEI), Lille, FranŃa, Instituto Superior Técnico - Universidade Tecnica de Lisboa (IST), Lisbona, Portugalia, Universitatea din Craiova (UCV), România. Director Universitatea din Craiova: prof. dr. ing. Sergiu IVANOV (membru in echipa).

8.2. NaŃionale obŃinute prin competiŃie

Pn1. Cercetare industrială şi dezvoltare experimentală vehicule acŃionate cu motoare electrice fără perii alimentate cu acumulatori litiu-ion pentru transport persoane-GENTLE ELECTRIC, Polul de competitivitate “Automotive Sud-Vest Oltenia”, Contract nr. P09004/ 08.05.2013, Cod SMIS 50140, partenet NEXTROM INDUSTRIES S.R.L., valoare UCV 1.115.999,7 RON (2 ani) (director).

http://www.google.ro/url?url=http://data.gov.ro/storage/f/2014-10-06T09%253A29%253A31.475Z/contracte-finantare-oct2014.xls&rct=j&frm=1&q=&esrc=s&sa=U&ved=0ahUKEwiA-cSGqP7JAhWFVxoKHd4EDyIQFggtMAY&sig2=_K8kXTkfxFSKDKDg4R-dpA&usg=AFQjCNEEn75_RSjmKIBe4f6JTw_tcalcdQ poz. B451

Pn2. Calitatea energiei si compatibilitatea electromagnetica ale sistemelor de actionare cu motoare sincrone reluctante. Metode de comanda a MSRV. Determinarea parametrilor MSRV, Contract nr. 27 GR / 11.05.2007, tema 7, cod CNCSIS 627 - 26.000 RON (1 an) (director).

http://194.102.64.7/GranturiFinalizate/faces/Projects/ProjectsList.jsp

___________________________________________________________________________


Pn3. Calitatea energiei si compatibilitatea electromagnetica ale sistemelor de actionare cu motoare sincrone reluctante. Analiza compatibilitatii electromagnetice a ansamblului convertor static-motor. Analiza functionarii si fenomene specifice regimurilor dinamice ale motoarelor sincrone reluctante, Contract nr. 24 C /19.05.2008, tema 16, cod CNCSIS 627 – 24.000 RON (1 an) (director).

http://194.102.64.7/GranturiFinalizate/faces/Projects/ProjectsList.jsp

Pn4. Sistem de tracŃiune inteligent, eficient energetic pentru noi generaŃii de maşini feroviare uşoare, Contract P_40_401, Sectiunea G Cod competiŃie POC-A1-A1.2.3-G-2015, Tip proiect: Parteneriate pentru transfer de cunoștințe –KTP, 7.037.600 lei (5 ani) (director)

http://www.poc.research.ro/uploads/Actiunea%201.2.3/Sectiunea%20G/rezultate-selectie-proiecte-G.pdf

Pn5. Cercetări teoretice şi experimentale privind comportarea maşinilor asincrone cu destinaŃii speciale. Analiza regimurilor de funcŃionare ale acestora în cazul alimentării de la surse convenŃionale şi neconvenŃionale. Influenta diversilor parametrii asupra regimurilor dinamice ale motoarelor asincrone. Considerarea saturatiei in analiza regimurilor dinamice ale masinilor asincrone, Grant cu MCT, program Cadru ORIZONT 2000, Cod program (din Orizont 2000) A11.2.2.4, Cod program (clasificare UNESCO) 33.06.03, contract nr. 663/1996, act aditional nr. 8/1997, Director prof. dr. ing. Aurel Campeanu (1 an) (membru in echipa).

Pn6. Cercetări teoretice şi experimentale privind comportarea maşinilor asincrone cu destinaŃii speciale. Analiza regimurilor de funcŃionare ale acestora în cazul alimentării de la surse convenŃionale şi neconvenŃionale. Caracteristici de baza ale masinii asincrone in diverse sisteme de comanda in vederea conservarii performantelor tehnico-economice pe o plaja larga de turatii. Efectele regimului deformant asupra caracteristicilor motoarelor asincrone. Aspecte privind optimizarea performantelor motoarelor asincrone alimentate de convertoare statice de tensiune si frecventa, Grant cu MCT, program Cadru ORIZONT 2000, Cod program (din Orizont 2000) A11.2.2.4, Cod program (clasificare UNESCO) 33.06.03, contract nr. 663/1996, act aditional nr. 11, tema A 16/1998, Director prof. dr. ing. Aurel Campeanu (1 an) (membru in echipa).

Pn7. Cercetări teoretice şi experimentale privind comportarea maşinilor asincrone cu destinaŃii speciale. Analiza regimurilor de funcŃionare ale acestora în cazul alimentării de la surse convenŃionale şi neconvenŃionale. Considerarea saturatiei in analiza regimurilor dinamice ale masinilor asincrone, Grant cu MCT, program Cadru ORIZONT 2000, Cod program (din Orizont 2000) A11.2.2.4, Cod program (clasificare UNESCO) 33.06.03, Contract nr. 663/1996, act aditional 333/1999, Director prof. dr. ing. Aurel Campeanu (1 an), Director prof. dr.ing. Aurel Campeanu (1 an) (membru in echipa).

Pn8. Cercetări teoretice şi experimentale privind comportarea maşinilor asincrone cu destinaŃii speciale. Analiza regimurilor de funcŃionare ale acestora în cazul alimentării de la surse convenŃionale şi neconvenŃionale. Studiul teoretic al motoarelor asincrone alimentate de la diferite tipuri de convertoare statice. Cercetari si concluzii privind comportarea motoarelor asincrone alimentate de la surse neconventionale, Grant cu MCT, program Cadru ORIZONT 2000, Cod program (din Orizont 2000) A11.2.2.4, Cod program (clasificare UNESCO) 33.06.03, Contract nr. 663/1996, act aditional nr. 23/2000, Director prof. dr.ing. Aurel Campeanu (1 an) (membru in echipa).

Pn9. Proiectarea optimală a maşinilor electrice de tracŃiune în condiŃiile considerării saturaŃiei şi alimentării de la convertoare statice, Grant cu Ministerul Educatiei Nationale, nr. 5006/ 16C/1996, pozitia 4, 7 mil lei (1 an), Director prof. dr. ing. Aurel Campeanu (1 an) (membru in echipa).

Pn10. Proiectarea optimală a maşinilor electrice de tracŃiune în condiŃiile considerării saturaŃiei şi alimentării de la convertoare statice. Studiul caracteristicilor de functionare si

___________________________________________________________________________


mecanice la motoarele de tractiune in cazul considerarii saturatiei. Metodica de proiectare optimala a motoarelor de tractiune cu luarea in considerare a saturatiei, Grant cu Ministerul Educatiei Nationale, nr. 7006/14C/1997, nr. temei 15 (din anexa 1) / cod CNCSU 1116, 15 mil lei (1 an), Director prof. dr. ing. Aurel Campeanu (1 an) (membru in echipa).

Pn11. Proiectarea optimală a maşinilor electrice de tracŃiune în condiŃiile considerării saturaŃiei şi alimentării de la convertoare statice. Aspecte privind implicatiile utilizarii convertoarelor statice asupra motoarelor de tractiune. Analiza regimului deformant al ansamblului masina electrica de trastiune-convertor, Grant cu Ministerul Educatiei Nationale, nr. 23/8C/1998, nr. temei 11 (din Anexa I), Cod CNCSU 21, 30 mil lei, Director prof. dr. ing. Aurel Campeanu (1 an) (membru in echipa).

Pn12. Proiectarea optimală a maşinilor electrice de tracŃiune în condiŃiile considerării saturaŃiei şi alimentării de la convertoare statice. Studiu privind comportarea masinilor de inductie in regim stationar si dinamic in cazul alimentarii de la convertoare statice. Efectele regimului deformant asupra caracteristicilor motorului de inductie, Grant cu Ministerul Educatiei Nationale, nr. 21/12C/1999, nr. temei 11 (din Anexa I), 85 mil, Director prof. dr. ing. Aurel Campeanu (1 an) (membru in echipa).

Pn13. Cercetări experimentale vizând optimizarea funcŃionării şi proiectării maşinilor electrice de mare putere. Metode actuale de cercetare experimentala. O noua metoda de incercare la parametrii nominali a masinii sincrone de mare putere, Grant Agentia Nationala pentru Stiinta Tehnologie si Inovare, Directia Generala Management si Plan National, nr. 6156/2000, tema B6/2000, 20 mil lei, Director prof. dr. ing. Aurel Campeanu (1 an) (membru in echipa).

Pn14. Cercetări experimentale vizând optimizarea funcŃionării şi proiectării maşinilor electrice de mare putere, Stabilitatea statica si dinamica a sistemului masinilor sincrone. Verificari la sarcina nominala, Grant cu Ministerul Educatiei si Cercetarii (CNCSIS), Contract nr. 6156/2000, act ad. 1 GR / 2001, 57,4 mil. lei, Director prof. dr. ing. Aurel Campeanu (1 an) (membru in echipa).

Pn15. Cercetări experimentale vizând optimizarea funcŃionării şi proiectării maşinilor electrice de mare putere, Stabilitatea statica si dinamica a sistemului masinilor sincrone. Verificari la sarcina nominala, Grant cu Ministerul Educatiei si Cercetarii (CNCSIS), 23C/2002, tema nr. 26, cod CNCSIS 6, 45 mil. lei, Director prof. dr. ing. Aurel Campeanu (1 an) (membru in echipa).

Pn16. Studii privind comportarea maşinilor de inducŃie alimentate la frecvenŃă variabilă. Analiza funcŃionării în cazul considerării saturaŃie. Studiu privind comportarea masinilor de inductie, in regim stationar si dinamic, in cazul alimentarii de la convertoare statice. Efectele regimului deformant asupra caracteristicilor motoarelor de inductie, Grant cu Ministerul Educatiei si Cercetarii, nr. contract 15C/1999, tema nr. 11, 85 mil. lei, Director prof. dr. ing. Aurel Campeanu (1 an) (membru in echipa).

Pn17. Studii privind comportarea maşinilor de inducŃie alimentate la frecvenŃă variabilă. Analiza funcŃionării în cazul considerării saturaŃie. Aspecte privind efectele saturatiei magnetice asupra functionarii masinilor de inductie. Verificari experimentale. Studiu vizand stabilitatea ansamblului motor de inductie-convertor static de tensiune si frecventa, Grant cu Ministerul Educatiei si Cercetarii, nr. contract 16C/17.06.2000, tema nr. 14, Cod CNCSIS 318, 45 mil. lei, Director prof. dr. ing. Aurel Campeanu (1 an) (membru in echipa).

Pn18. Studii privind comportarea maşinilor de inducŃie alimentate la frecvenŃă variabilă. Analiza funcŃionării în cazul considerării saturaŃiei. Studiu privind comportarea masinilor de inductie, in regim stationar si dinamic, in cazul alimentarii de la convertoare statice. Efectele regimului deformant asupra caracteristicilor motoarelor de inductie, Grant cu Ministerul Educatiei si Cercetarii, nr. contract 35254/01.08.2001, tema nr. 36, cod

___________________________________________________________________________


CNCSIS 338 40 mil. lei (Faza 1 - 30 mil., Faza 2 - 10 mil.), Director prof. dr. ing. Aurel Campeanu (1 an) (membru in echipa).

Pn19. Parametrii energetici ai masinilor sincrone de mare putere in regim deformant, Regimuri de functionare si fenomene specifice masinilor sincrone in regim deformant, Grant CNCSIS tip A, Cod CNCSIS 312, 2004, 140 mil. lei, Director prof. dr.ing. Aurel Campeanu (1 an) (membru in echipa).

Pn20. Parametrii energetici ai masinilor sincrone de mare putere in regim deformant. Calculul parametrilor si caracteristicilor de functionare ale generatoarelor sincrone in regim deformant, Grant tip A, Contract nr. 34677 / 24.06.2005, 12000 RON, Director prof. dr. ing. Aurel Campeanu (1 an) (membru in echipa).

Pn21. Parametrii energetici ai masinilor sincrone de mare putere in regim deformant. Cercetari teoretice si experimentale privind determinarea performantelor generatoarelor sincrone in regim deformant, Grant tip A, tema 6, cod CNCSIS 312, act. ad. GR 155/4.05.2006, 12000 RON, Director prof. dr. ing. Aurel Campeanu (1 an) (membru in echipa).

Pn22. Cresterea eficientei conversiei electro-mecanice a energiei prin masini electrice cu excitatie hibrida, program CEEX, contract nr. 291/13.09.2006, tema 1060/CEEX/C1/2006, 19400 RON, Director prof. dr. ing. Aurel Campeanu (1 an) (membru in echipa).

Pn23. Grant national CEEX HYBRID nr. 291/13.09.2006, tema 1060/CEEX/C1/2006, Director prof. dr. ing. Corneliu Nica (3 ani - 2006, 2007, 2008) (membru in echipa).

Pn24. Optimizarea funcŃionării hidrogeneratoarelor electrice prin modernizarea sistemelor de excitaŃie în vederea creşterii eficienŃei energetice şi competitivităŃii lor, Grant cu M.E.C.T. prin C.N.M.P., nr. 21-040/14.09.2007 (2007-6000 lei, 2008-12500 lei, 2009-68000 lei, 2010-10000 lei), Parteneri: Universitatea Politehnica Timisoara si Academia Romana filiala Timisoara, Responsabil UCV prof. dr. ing. Bitoleanu Alexandru (4 ani) (membru in echipa).

Pn25. Cercetari privind realizarea unui vehicul feroviar inteligent pentru transportul sigur, confortabil si eficient de călători – VISCET 126 CEEX II 03/15.09.2006 Grant CEEX, Parteneriate, nr. 126/2006-2008. Coordonator: Universitatea din Craiova, Parteneri: SPIACT - Craiova, AGIR - Bucuresti, S.C. MISO - SRL Craiova. Valoare: 1 400 000 Lei, Director: Prof. univ. dr. ing. Manolea Ghoerghe (3 ani) (membru in echipa).

8.3. Contracte de cercetare / consultanŃă (valoare echivalentă de minim 2.000 Euro)

Pt1. Contract cadru de colaborare (Cercetari, incercari si verificari generatoare si motoare de

curent continuu si motoare asincrone de joasa si inalta tensiune), S.C. ELECTROMIN S.R.L. Craiova, 7C/2010, 11703 lei (responsabil).

Pt2. Contract cadru de colaborare (Incercari si verificari ale generatoarelor si motoarelor electrice pentru tractiunea urbana, feroviara si pentru uz general), S.C. CONSTRONIC MAE S.A. Craiova, 6C/2010, 10245 lei (responsabil).

Pt3. Contract cadru de colaborare (Cercetări încercări şi verificări de motoare electrice asincrone şi sincrone) , S.C. ELECTROMIN IMPEX S.R.L. Craiova, 7C/2010, 11425 lei/2011 (responsabil).

Pt4. Contract cadru de colaborare cu SC ELECTROSERVICE SRL Bacau, 1C/2012 +1C/2013 (Contract de cercetare, consultanta, incercari, servicii tehnice si tehnologice pentru: motoare electrice asincrone de joasa tensiune; motoare electrice asincrone de inalta tensiune), 5635 lei /2012+5580lei /2013=11215 lei (responsabil).

___________________________________________________________________________


Pt5. Contract cadru de colaborare (Cercetari incercari si verificari ale motoarelor asincrone, sincrone si curent continuu, generatoare sincrone si motoare de c.c. pentru tractiunea urbanasi feroviara), S.C. MOTOARE ELECTRICE S.R.L. Craiova, 8C/2010, 41421.00 lei/2010, Director prof. dr. ing. Ion Vlad (membru in echipa).

Pt6. Contract cadru de colaborare (Cercetari incercari si verificari ale motoarelor asincrone, sincrone si curent continuu, generatoare sincrone si motoare de c.c. pentru tractiunea urbanasi feroviara), S.C. MOTOARE ELECTRICE S.R.L. Craiova, 8C/2010, 17651.00 lei/2011, Director prof. dr. ing. Ion Vlad (membru in echipa).

Pt7. Contract cadru de colaborare (Cercetari, incercari si verificari ale motoarelor electrice asincrone de joasa si inalta tensiune), S.C. LINEX WOLF S.R.L. Filiasi, 474/2010, 11930 lei/2011, Director prof. dr. ing. Ion Vlad (membru in echipa).

Pt8. Contract de cercetare, consultanta servicii tehnice si tehnologice (Contract de cercetare, consultanta, incercari, servicii tehnice si tehnologice pentru: masini electrice de curent alternativ de joasa si inalta tensiune; masini electrice de curent continuu), S.C. LINEX WOLF S.R.L., 19 C/2012, 18238 lei/2012, Director prof. dr. ing. Ion Vlad (membru in echipa).

Pt9. Contract de cercetare, consultanta, servicii tehnice si tehnologice (Cercetări, încercări şi verificări ale motoarelor electrice asincrone de joasă şi înaltă tensiune), S.C. LINEX WOLF S.R.L., 19 C/2012, 9725 lei/2013, Director prof. dr. ing. Ion Vlad (membru in echipa).

Pt10. Contract cadru de colaborare (Cercetari, incercari si verificari ale masinilor electrice de curent alternativ), S.C. UVEX S.R.L., Craiova, 4C /2010, 9649 lei/2010, Director prof. dr. ing. Ion Vlad (membru in echipa).

Pt11. Contract cadru de colaborare (Experimentari si incercari de masini electrice de curent alternativ de joasa si inalta tensiune), S.C. MILBA REBOB S.R.L. Craiova, 3 C/2010 =7047 lei/2010 + 4062 lei /2013 =11109 lei, Director prof. dr. ing. Ion Vlad (membru in echipa).

Pt12. Contract cadru de colaborare (Cercetări încercări şi verificări ale maşinilor electrice de curent continuu şi alternativ de joasă şi înaltă tensiune de uz general şi pentru tracŃiune), S.C. CONSTRONIC MAE S.A. Craiova, 6C/2010 si 20C/2012 =3365 lei/2011 + 1200 lei/2012 + 3599 lei/2013 = 8164 lei, Director prof. dr. ing. Ion Vlad (membru in echipa).

Pt13. Contract cadru de colaborare (Cercetari, incercari si verificari ale masinilor electrice de curent alternativ si de curent continuu), S.C. UVEX S.R.L., Craiova, 4 C /2010 + Contract de cercetare, consultanta, servicii tehnice si tehnologice (Maşini electrice de curent alternativ joasa si inalta tensiune si masini electrice de curent continuu), S.C. UVEX S.R.L. Craiova, nr. 24 C/2012, 9237 lei/2012, Director prof. dr. ing. Ion Vlad (membru in echipa).

Pt14. Optimizarea funcŃionării în regimuri staŃionare şi tranzitorii particulare a maşinilor electrice rotative, Contract cu M.E.I., nr. 18C/09.07.1993, 0,5 mil. lei, Director prof. dr. ing. Aurel Campeanu (membru in echipa).

Pt15. Analiza critică a metodelor de proiectare a maşinii asincrone în vederea întocmirii unei metodici de proiectare optimală, Contract de cercetare ştiinŃifică cu I.C.P.E., nr. 23C/20.07.1993, 0,3 mil. , Director prof. dr. ing. Aurel Campeanu (membru in echipa).

Pt16. Contributii privind monitorizarea regimurilor dinamice ale motoarelor sincrone cu reluctanta variabila, Contract de cercetare interna, Contract nr. 30C/27.01.2014, 2014, 1200 lei, Director s. l. dr. ing. Monica-Adela Enache (membru in echipa).

___________________________________________________________________________


9. Materiale didactice Md1. Sorin ENACHE, Ion VLAD: Masurari electrice si electronice. Indrumar de laborator,

EdituraUniversitaria Craiova, ISBN 978-606-14-0435-3, 2012 (120 pag.).

Md2. Aurel CAMPEANU, Ion VLAD, Sorin ENACHE: Dinamica maşinilor electrice - Îndrumar de laborator, Reprografia UniversităŃii din Craiova, 2001 (70 pag.).

Md3. Corneliu NICA, Sorin ENACHE, Monica-Adela ENACHE: Maşini electrice speciale- Îndrumar de laborator, Reprografia UniversităŃii din Craiova, 2001 (224 pag.).

Md4. Nicu VINTILĂ, Corneliu NICĂ, Decebal ALEXANDRU, Sorin ENACHE: Transformatorul electric - Îndrumar de laborator, Reprografia UniversităŃii din Craiova, 1996 (136 pag.).

Md5. Corneliu NICĂ, Stefan BUSUIOC, Sorin ENACHE: Micromaşini electrice - Îndrumar de laborator, Reprografia UniversităŃii din Craiova, 1995 (190 pag.).

Legendă T – teză de doctorat I – inventie C – cărŃi de specialitate Ai – articole in reviste si volume indexate ISI Thomson-Reuters Ab – articole in reviste si volume indexate BDI An – articole in reviste si volume recunoscute dar neindexate Pi – proiect internaŃional de cercetare obŃinut prin competiŃie Pn – proiect naŃional de cercetare obŃinut prin competiŃie Pt – proiect cercetare/consultanŃă Md – materiale didactice Numerotare Bold – lucrare realizată după obŃinerea titlului de Doctor Numerotare Normal – lucrare realizată înainte de obŃinerea titlului de Doctor

Lista lucr ărilor elaborate - Universitatea din Craiova · ENACHE, S. , VLAD, I.: Masina de...

Documents

Transcript of Lista lucr ărilor elaborate - Universitatea din Craiova · ENACHE, S. , VLAD, I.: Masina de...