FISA TEHNICA PLACI

download FISA TEHNICA PLACI

of 2

Transcript of FISA TEHNICA PLACI

  • 7/29/2019 FISA TEHNICA PLACI

    1/2

    ARTICLE INFORMATION SHEETApproval date: 22.07.2009Print Date: 12.05.2010000000033775/Version: 1.0Page: 1/2

    1. Identification of the article

    Product name: CAPRICORN VT

    Product Use: Graphic Arts product, printing plate, For industrial use only.

    2.CompanySupplier: KODAK LIMITED, Hemel One, Boundary Way, Hemel Hempstead, HP2 7YU, Great Britain

    IN EMERGENCY, telephone: (020) 8427 4380.

    For further information about this product, telephone 01442 261122 or email [email protected].

    3. Composition/information on ingredients

    Weight % Component

    > 99 Aluminum

    < 1 Resins and Colorants4. Health and safety

    General advice: This product is not expected to cause any health or safety hazards, when used as intended.

    Health Aspects: Potential lacerations may result from the thin gauge metal. While unlikely when handledproperly, cuts or lacerations should receive proper first aid/medical attention. Wear protective gloves. No otherpersonal protection is needed under recommended conditions of use. The laser exposure process used to imagethis product produces gases and particulates as thermal decomposition by-products. Good general ventilation

    (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions.

    Fire Hazard and Extinguishing Media:

    Safety advice

    Not flammable and not easily combustible.

    The laser exposure process used to image this product produces gases and particulates as thermaldecomposition by-products.Trace amounts of hazardous and non-hazardous gases might be produced duringlaser imaging and processing.Good general ventilation (typically 10 air changes per hour) should be used.Ventilation rates should be matched to conditions.

    Extinguishing Media: Use extinguishing measures that are appropriate to local circumstances and the

    surrounding environment.

    5. Waste disposal

    Discharge, treatment, or disposal may be subject to federal, state, commonwealth, provincial, or local laws. Canbe offered for metal recovery.

    EWC Waste code 20 01 40

    6. Transport and labelling regulations

  • 7/29/2019 FISA TEHNICA PLACI

    2/2

    ARTICLE INFORMATION SHEETApproval date: 22.07.2009Print Date: 12.05.2010000000033775/Version: 1.0Page: 2/2

    Not subject to the regulations on transport and labelling that apply to dangerous substances.

    Unused product is classified on the Green List as Category GA 104 7602 00.

    7. Storage

    Keep in a cool, well-ventilated place. Refer also to instructions for use.

    8. Other information

    The information contained herein is furnished without warranty of any kind. Users should consider these dataonly as a supplement to other information gathered by them and must make independent determinations ofsuitability and completeness of information from all sources to assure proper use and disposal of these materialsand the safety and health of employees and customers and the protection of the environment.