Buletin martie_2005.pdf

8/14/2019 Buletin martie_2005.pdf

1/28

STANDARDIZAREA NA!IONAL"

STANDARDE EUROPENE ADOPTATE INI!IAL PRIN FIL"DE CONFIRMARE SAU NOT"DECONFIRMARE PENTRU CARE SE PUBLIC"VERSIUNEA ROMN"

n aceast! rubric! sunt nscrise standardele romne adoptate ini"ial prin fil! de confirmare sau not! deconfirmare #i pentru care se public!varianta romn!.

Data de aprobare men"ionat!sub titlul standardului este data la care a fost adoptat standardul european prinfil!de confirmare sau not!de confirmare.

Versiunea romn! publicat! nlocuie#te fila de confirmare sau nota de confirmare a adopt!rii standarduluirespectiv, publicat!anterior.

17 METROLOGIE #I M"SURARE.FENOMENE FIZICE

17.120 Mijloace de m$surare a debituluifluidelor

17.120.10 M$surarea debitului n conductenchise

SR EN ISO 5167-2:2004M!surarea debitului de fluide prin metoda mic"or!rii locale asec#iunii de curgere n conducte cu sec#iune circular!sub

presiune. Partea 2: DiafragmeData aprob!rii: 2004.11.26Data traducerii: 2005.02.24

MODIFIC"RI N ORGANIZAREA #I STRUCTURA COMITETELOR TEHNICE

n aceast! rubric!sunt publicate informa"ii privind activitatea comitetelor tehnice na"ionale de standardizarecare au suferit modific!ri n organizare sau structur!n luna februarie 2004.

! Activitatea de standardizare na#ional! se desf!"oar! n comitete tehnice, organe f!r! personalitate juridic! aleorganismului na#ional de standardizare. Structura "i modul de lucru ale comitetelor tehnice sunt prev!zute nstandardul SR 10000-3.

! Activitatea comitetelor tehnice se desf!"oar!att pe plan na#ional, ct "i european "i interna#ional.

! Membrii comitetelor tehnice sunt speciali"ti desemna#i nominal de factorii interesa#i (agen#i economici, institute decercetare, de nv!#!mnt, asocia#ii profesionale, organisme guvernamentale etc.) "i mputernici#i de ace"tia.Componen#a comitetelor tehnice trebuie s! asigure reprezentarea echilibrat! a factorilor interesa#i: produc!tori,utilizatori, consumatori, autorit!#i etc. Pentru a deveni membru al unui comitet tehnic trebuie s! se transmit! osolicitare scris! (e-mail sau fax) expertului ASRO responsabil pentru comitetul respectiv. Participarea estevoluntar! "i nu necesit! achitarea vreunei taxe. Adresele de e-mail ale exper#ilor ASRO, pentru fiecare comitettehnic n parte, pot fi g!site la adresa www.asro.ro

! Prin participarea la activitatea comitetelor tehnice, speciali"tii factorilor interesa#i au posibilitatea s!-"i aduc!contribu#ia la standardizarea na#ional!, european! sau interna#ional!, s! cunoasc! cu doi-trei ani n avansinforma#iile propuse pentru a fi incluse n standarde, putnd astfel lua m!surile care se impun. Totodat!,participarea activ! la lucr!rile comitetelor tehnice reprezint!o deosebit!oportunitate pentru a realiza "i ntre#inecontacte cu speciali"tii din domeniul specific de activitate, din #ar!"i str!in!tate.

! Informa#ii privind participarea la activitatea de standardizare n cadrul comitetelor tehnice pot fi primite de laexper#ii Direc#iei de Standardizare ASRO (a se vedea www.asro.ro).


2/28

Buletinul Standardiz!rii Martie 2005

2

CT19 ncerc$ri mecano-climaticeSecretariat: ICPE - Institutul de Cercetare "i Proiectare pentru Electrotehnic!Pre"edinte ing. Rodica ANDONEExpert ASRO:ing. Tatiana SC$RL$TESCU

CT52 Calitatea apei

Secretariat: ICIM - Institutul de Cercetare "i Ingineria MediuluiSecretar ing. Mariana ST$NCIULESCUExpert ASRO:ing. Mihaela BICHIR

CT118 Lemn %i produse semifinite din lemnSecretariat: INL - Institutul Na#ional al LemnuluiSecretar ing. Georgeta DAVIDExpert ASRO:ing. Mariana CR$CIUN

CT318 Mobilier, u%i, ferestre, elemente de nchidere %i accesorii pentru construc&iiSecretariat: INL - Institutul Na#ional al LemnuluiSecretar ing. Georgeta DAVIDExpert ASRO:

ing. Mariana CR$CIUN

CT363 PardoseliSecretariat: ICECON - Institutul de Cercet!ri pentru Echipamente "i Tehnologii de Mecanizarea Construc#iilorSecretar ing. Mircea M$NDESCUExpert ASRO:ing. Mariana CR$CIUN


3/28


3

STANDARDIZAREA EUROPEAN"

Informa"iile din aceast! sec"iune se refer! la activitatea Organiza"iilor Europene de Standardizare CEN,CENELEC #i ETSI.

n vederea unei mai mari operativit!"i, titlurile standardelor #i proiectelor de standarde europene se public!nversiunea original!(englez!).

Pentru n"elegerea simbolurilor utilizate n aceast!sec"iune se fac preciz!rile de mai jos:

EN Standard EuropeanHD Document de armonizareENV Prestandard EuropeanCR Raport CENCWA Acordul Grupei de LucruETSI EG Ghid ETSIETSI EN Standard european pentru telecomunica#ii

ETSI ES Standard ETSIETSI TS Specifica#ie tehnic!ETSIETSI TR Raport tehnic ETSIETSI SR Raport special ETSIdoa Termenul limit!de anun#are a standardului european la nivel na#ionaldop Termenul limit!de publicare a standardului la nivel na#ionaldow Termenul limit!de retragere a standardelor na#ionale conflictualeprEN Proiect de Standard EuropeanprHD Proiect de Document de armonizareprENV Proiect de Prestandard Europeandea Termen limit!de r!spuns pentru observa#ii "i/sau vot formal .eOP Procedur! simplificat!de adoptare (ETSI)ePE Termen limit!de r!spuns pentru sfr"itul anchetei publice a unui standard ETSIAd Dat!de adoptare

Sectoarele CEN "i CENELEC sunt:

A ServiciiB Cl!diri "i construc#iiC Produse chimice, industrie chimic!"i produse alimentareF Standarde fundamentaleH Produse electrocasnice "i pentru distrac#ieI Inginerie mecanic!M Materiale metaliceN Materiale nemetaliceS S!n!tate, mediu "i echipamente medicaleT Transport, manipulare mecanic!"i ambalaje

U Inginerie electronic!W Inginerie electric!Z Diverse

STANDARDE EUROPENE CEN APROBATE

n perioada 01.02.2005 28.02.2005

A03 SERVICII PO#TALE

CEN/TS 14441:2005Postal services - Mail aggregates - Creation, processing andtrackingdoa: 2005.05.31dop: dow:

CEN/TS 14631:2005Postal services - Automatic identification of receptacles andcontainers - Receptacle assetdoa: 2005.05.31dop: dow:


4/28


4

B01 M"SURI DE SIGURAN!"CONTRAINCENDIILOR

EN 14466:2005Fire fighting pumps - Portable pumps - Safety and performancerequirements, testsdoa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN 14710-1:2005Fire-fighting pumps - Fire-fighting centrifugal pumps withoutprimer - Part 1: Classification, general and safety requirementsdoa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN 14710-2:2005Fire-fighting pumps - Fire-fighting centrifugal pumps withoutprimer - Part 2: Verification of general and safety requirementsdoa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

B03 BETON

EN 450-1:2005Fly ash for concrete - Part 1: Definition, specifications and

conformity criteriadoa: 2005.05.31dop: 2005.08.31 dow: 2006.08.31

EN 450-2:2005Fly ash for concrete - Part 2: Conformity evaluationdoa: 2005.05.31dop: 2005.08.31 dow: 2006.08.31

B04 CIMENT

EN 196-1:2005Methods of testing cement - Part 1: Determination of strengthdoa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN 196-2:2005Methods of testing cement - Part 2: Chemical analysis of cementdoa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31EN 196-3:2005Methods of testing cement - Part 3: Determination of settingtimes and soundnessdoa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31EN 196-5:2005Methods of testing cement - Part 5: Pozzolanicity test forpozzolanic cementdoa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

B06 GHIPS

EN 14195:2005Metal framing components for gypsum plasterboard systems -Definitions, requirements and test

doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

B08 U#I #I FERESTRE

EN 1303:2005Building hardware - Cylinders for locks Requirements and testmethodsdoa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

B12 ZID"RII

EN 771-1:2003/A1:2005

Specification for masonry units - Part 1: Clay masonry unitsdoa: 2005.05.31dop: 2005.08.31 dow: 2006.04.01

EN 771-2:2003/A1:2005Specification for masonry units - Part 2: Calcium silicate masonryunitsdoa: 2005.05.31dop: 2005.08.31 dow: 2006.04.01

EN 771-3:2003/A1:2005Specification for masonry units - Part 3: Aggregate concrete

masonry units (Dense and light-weight aggregates)doa: 2005.05.31dop: 2005.08.31 dow: 2006.04.01EN 771-4:2003/A1:2005Specification for masonry units - Part 4: Autoclaved aeratedconcrete masonry unitsdoa: 2005.05.31dop: 2005.08.31 dow: 2006.04.01EN 771-5:2003/A1:2005Specification for masonry units - Part 5: Manufactured stonemasonry unitsdoa: 2005.05.31dop: 2005.08.31 dow: 2006.04.01EN 772-16:2000/A2:2005Methods of test for masonry units - Part 16: Determination ofdimensionsdoa: 2005.05.31dop: 2005.08.31 dow: 2006.04.01EN 772-2:1998/A1:2005Methods of test for masonry units - Part 2: Determination ofpercentage area of voids in masonry units (by paper indentation)doa: 2005.05.31dop: 2005.08.31 dow: 2006.04.01

EN 772-20:2000/A1:2005Methods of test for masonry units - Part 20: Determination offlatness of faces of masonry unitsdoa: 2005.05.31dop: 2005.08.31 dow: 2006.04.01EN 772-9:1998/A1:2005Methods of test for masonry units - Part 9: Determination ofvolume and percentage of voids and net volume of clay and

calcium silicate masonry units by sand fillingdoa: 2005.05.31dop: 2005.08.31 dow: 2006.04.01

B27 MATERIALE HIDROIZOLANTE

EN 13859-1:2005Flexible sheets for waterproofing - Definitions and characteristicsof underlays - Part 1: Underlays for discontinuous roofingdoa: 2005.05.31dop: 2005.08.31 dow: 2006.11.30

EN 612:2005Eaves gutters with bead stiffened fronts and rainwater pipes withseamed joints made of metal

doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

B28 MBR"C"MINTE PENTRU PARDOSELIEN 1307:2005Textile floor coverings - Classification of pile carpetdoa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

B32 PRODUSE PREFABRICATE DE BETONEN 12794:2005Precast concrete products - Foundation pilesdoa: 2005.05.31dop: 2005.08.31 dow: 2006.11.30

C01 PRODUSE ALIMENTARE

EN ISO 21571:2005Foodstuffs - Methods of analysis for the detection of geneticallymodified organisms and derived products. Nucleic acid extraction(ISO 21571:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31


5/28


5

EN ISO 22174:2005Microbiology of food and animal feeding stuffs - Polymerasechain reaction (PCR) for the detection of food-borne pathogens -General requirements and definitions (ISO 22174:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

F05 MIJLOACE DE M"SUR"

EN 14154-1:2005Water meters - Part 1: General requirementsdoa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN 14154-2:2005Water meters - Part 2 : Installation and conditions of usedoa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN 14154-3:2005Water meters - Part 3 : Test methods and equipmentdoa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

F12 SISTEME DE PRELUCRARE AINFORMA!IEI

CEN ISO/TS 14907-1:2005Road transport and traffic telematics - Electronic fee collection -Test procedures for user and fixed equipment - Part 1:Description of test procedures (ISO/TS 14907-1:2005)doa: 2005.05.31dop: dow:

CEN ISO/TS 17261:2005Intelligent transport systems - Automatic vehicle and equipmentidentification - Intermodal good transport architecture andterminology (ISO/TS 17261:2005)doa: 2005.05.31dop: dow:

EN 1064:2005

Health informatics - Standard communication protocol -Computer-assisted electrocardiographydoa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN 12381:2005Health informatics - Time standards for healthcare specificproblemsdoa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

F19 OPTIC"

EN ISO 11146-2:2005Lasers and laser-related equipment - Test methods for laserbeam widths, divergence angles and beam propagation ratios -Part 2: General astigmatic beams (ISO 11146-2:2005)

doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31EN ISO 11553-1:2005Safety of machinery - Laser processing machines - Part 1:General safety requirements (ISO 11553-1:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN ISO 11810-1:2005Lasers and laser-related equipment - Test method andclassification for the laser resistance of surgical drapes and/orpatient protective covers - Part 1: Primary ignition and penetration(ISO 11810-1:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

H15 JUC"RII

CEN/TR 15071:2005Safety of toys - National translations of warnings and instructionsfor use in EN 71doa: dop: dow:

EN 71-9:2005Safety of toys - Part 9: Organic chemical compounds -Requirementsdoa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

H19 CUPTOARE #I GR"TARE NEELECTRICE

EN 1860-2:2005Appliances, solid fuels and f irelighters for barbecueing - Part 2:Barbecue charcoal and barbecue charcoal briquettes -Requirements and testdoa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

H32 USTENSILE DE BUC"T"RIE

CEN/TS 12983-2:2005Cookware - Domestic cookware for use on top of a stove, cookeror hob - Part 2: Further general requirements and specificrequirements for ceramic, glass and glass ceramic cookwaredoa: 2005.05.31dop: dow:

CEN/TS 13130-10:2005

Materials and articles in contact with foodstuffs - Plasticssubstances subject to limitation - Part 10: Determination ofacrylamide in food simulantsdoa: 2005.05.31dop: dow:CEN/TS 13130-11:2005Materials and articles in contact with foodstuffs - Plasticssubstances subject to limitation - Part 11: Determination of11-aminoundecanoic acid in food simulantsdoa: 2005.05.31dop: dow:

CEN/TS 13130-12:2005Material and articles in contact with foodstuffs - Plasticssubstances subject to limitation - Part 12: Determination of1,3-benzenedimethanamine in food simulants

doa: 2005.05.31dop: dow:CEN/TS 13130-13:2005Materials and articles in contact with foodstuffs - Plasticssubstances subject to limitation - Part 13: Determination of2,2-bis(4-hydroxyphenyl)propane (Bisphenol A) in food simulantsdoa: 2005.05.31dop: dow:

CEN/TS 13130-14:2005Materials and articles in contact with foodstuffs - Plasticssubstances subject to limitation - Part 14: Determination of3,3-bis(3-methyl-4-hydroxyphenyl)-2-indoline in food simulantsdoa: 2005.05.31dop: dow:

CEN/TS 13130-15:2005Materials and articles in contact with foodstuffs - Plasticssubstances subject to limitation - Part 15: Determination of1,3-butadiene in food simulantsdoa: 2005.05.31dop: dow:

CEN/TS 13130-16:2005Materials and articles in contact with foodstuffs - Plasticssubstances subject to limitation - Part 16: Determination ofcaprolactam and caprolactam salt in food simulantsdoa: 2005.05.31dop: dow:

CEN/TS 13130-17:2005Materials and articles in contact with foodstuffs - Plasticssubstances subject to limitation - Part 17: Determination ofcarbonyl chloride in plasticsdoa: 2005.05.31dop: dow:


6/28


6

CEN/TS 13130-18:2005Materials and articles in contact with foodstuffs -Plastics substances subject to limitation - Part 18:Determination of 1,2-dihydroxybenzene, 1,3-dihydroxybenzene,1,4-dihydroxybenzene, 4,4'-dihydroxybenzophenone and4,4'dihydroxybiphenyl in food simulantsdoa: 2005.05.31dop: dow:

CEN/TS 13130-19:2005Materials and articles in contact with foodstuffs - Plasticssubstances subject to limitation - Part 19: Determination ofdimethylaminoethanol in food simulantsdoa: 2005.05.31dop: dow:

CEN/TS 13130-20:2005Materials and articles in contact with foodstuffs - Plasticssubstances subject to limitation - Part 20: Determination ofepichlorohydrin in plasticsdoa: 2005.05.31dop: dow:

CEN/TS 13130-21:2005Materials and articles in contact with foodstuffs - Plasticssubstances subject to limitation - Part 21: Determination ofethylenediamine and hexamethylenediamine in food simulantsdoa: 2005.05.31dop: dow:

CEN/TS 13130-22:2005Materials and articles in contact with foodstuffs - Plasticssubstances subject to limitation - Part 22: Determination ofethylene oxide and propylene oxide in plasticsdoa: 2005.05.31dop: dow:

CEN/TS 13130-23:2005Materials and articles in contact with foodstuffs - Plasticssubstances subject to limitation - Part 23: Determination offormaldehyde and hexamethylenetetramine in food simulantsdoa: 2005.05.31dop: dow:

CEN/TS 13130-24:2005Materials and articles in contact with foodstuffs - Plasticssubstances subject to limitation - Part 24: Determination ofmaleic acid and maleic anhydride in food simulantsdoa: 2005.05.31dop: dow:

CEN/TS 13130-25:2005Materials and articles in contact with foodstuffs - Plasticssubstances subject to limitation - Part 25: Determination of4-methyl-1-pentene in food simulantsdoa: 2005.05.31dop: dow:

CEN/TS 13130-26:2005Materials and articles in contact with foodstuffs - Plasticssubstances subject to limitation - Part 26: Determination of

1-octene and tetrahydrofuran in food simulantsdoa: 2005.05.31dop: dow:

CEN/TS 13130-27:2005Materials and articles in contact with foodstuffs - Plasticssubstances subject to limitation - Part 27: Determination of2,4,6-triamino-1,3,5-triazine in food simulantsdoa: 2005.05.31dop: dow:

CEN/TS 13130-28:2005Materials and articles in contact with foodstuffs - Plasticssubstances subject to limitation - Part 28: Determination of1,1,1-trimethylolpropane in food simulantsdoa: 2005.05.31dop: dow:

CEN/TS 13130-9:2005Materials and articles in contact with foodstuffs - Plasticssubstances subject to limitation - Part 9: Determination of aceticacid, vinyl ester in food simulantsdoa: 2005.05.31dop: dow:

I02 ELEMENTE DE ASAMBLARE

EN ISO 15065:2005Countersinks for countersunk head screws with headconfiguration in accordance with ISO 7721 (ISO 15065:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN ISO 16047:2005Fasteners - Torque/clamp force testing (ISO 16047:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

I08 MA#INI AGRICOLE

EN ISO 22868:2005Forestry machinery - Noise test code for portable hand-heldmachines with internal combustion engine - Engineering method(Grade 2 accuracy) (ISO 22868:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

I17 MA#INI N GENERAL (INCLUSIVSECURITATEA)

EN 13870:2005Food processing machinery - Chop cutting machines - Safetyand hygiene requirementsdoa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN 14462:2005Surface treatment equipment - Noise test code for surfacetreatment equipment including its ancillary handling equipment -

Accuracy grades 2 and 3doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN ISO 11111-1:2005Textile machinery - Safety requirements - Part 1: Commonrequirements (ISO 11111-1:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN ISO 11111-2:2005Textile machinery - Safety requirements - Part 2: Spinningpreparatory and spinning machines (ISO 11111-2:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN ISO 11111-3:2005Textile machinery - Safety requirements - Part 3: Nonwovenmachinery (ISO 11111-3:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN ISO 11111-4:2005Textile machinery - Safety requirements - Part 4: Yarnprocessing, cordage and rope manufacturing machinery(ISO 11111-4:2005)

doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31EN ISO 11111-5:2005Textile machinery - Safety requirements - Part 5: Preparatorymachinery to weaving and knitting (ISO 11111-5:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN ISO 11111-6:2005Textile machinery - Safety requirements - Part 6: Fabricmanufacturing machinery (ISO 11111-6:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN ISO 11111-7:2005Textile machinery - Safety requirements - Part 7: Dyeing andfinishing machinery (ISO 11111-7:2005)

doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31


7/28


7

I27 ECHIPAMENT PENTRU LUCR"RI DETERASAMENT #I N CONSTRUC!II

EN 815:1996/A1:2005Safety of unshielded tunnel boring machines and rodless shaftboring machines for rockdoa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

I32 FLAN#E

EN 14772:2005Flanges and their joints - Quality assurance inspection andtesting of gaskets in accordance with the series of standardsEN 1514 and EN 12560doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

I38 MA#INI PENTRU PIEL"RIE, PENTRUT"B"C"RIE #I MA#INI AUXILIARE

EN 12387:2005Footwear, leather and imitation leather goods manufacturingmachines - Modular shoe repair equipment - Safety requirements

doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31M01 O!EL

EN 10217-7:2005Welded steel tubes for pressure purposes Technical deliveryconditions - Part 7: Stainless steel tubesdoa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN 10226-3:2005Pipes threads where pressure tight joint are made on the threads- Part 3: Verification by means of limit gauges doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

M05 SUDARE

EN ISO 15614-10:2005Specification and qualification of welding procedures for metallicmaterials - Welding procedure test - Part 10: Hyperbaric drywelding (ISO 15614-10:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN ISO 15614-13:2005Specification and qualification of welding procedures for metallicmaterials - Welding procedure test - Part 13: Resistance butt andflash welding (ISO 15614-13:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

M15 COROZIUNE METALIC"

EN ISO 7539-7:2005Corrosion of metals and alloys - Stress corrosion testing - Part 7:Method for slow strain rate testing (ISO 7539-7:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

M16 NCERC"RI MACANICE ALE METALELOR

EN 10328:2005Iron and steel - Determination of the conventional depth ofhardening after surface heatingdoa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

N01 HRTIE #I CARTON

EN ISO 12625-6:2005Tissue paper and tissue products - Part 6: Determination ofgrammage (ISO 12625-6:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN ISO 5269-1:2005Pulps - Preparation of laboratory sheets for physical testing -Part 1: Conventional sheet-former method (ISO 5269-1:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN ISO 534:2005Paper and board - Determination of thickness, density and

specific volume (ISO 534:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

N05 TEXTILE

CEN/TR 15019:2005Geotextiles and geotextile-related products - On-site qualitycontroldoa: dop: dow:

EN ISO 12957-1:2005Geosynthetics - Determination of friction characteristics - Part 1:Direct shear test (ISO 12957-1:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN ISO 12957-2:2005Geosynthetics - Determination of friction characteristics - Part 2:Inclined plane test (ISO 12957-2:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN ISO 13428:2005Geosynthetics - Determination of the protection efficiency of ageosynthetic against impact damage (ISO 13428:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN ISO 2307:2005Fibre ropes - Determination of certain physical and mechanicalproperties (ISO 2307:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN ISO 9554:2005Fibre ropes - General specifications (ISO 9554:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31EN ISO 9862:2005Geosynthetics - Sampling and preparation of test specimens(ISO 9862:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN ISO 9863-1:2005Geosynthetics - Determination of thickness at specifiedpressures - Part 1: Single layers (ISO 9863-1:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN ISO 9864:2005Geosynthetics - Test method for the determination of mass perunit area of geotextiles and geotextile-related products(ISO 9864:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

N09 MATERIALE PLASTICE

EN ISO 11402:2005Phenolic, amino and condensation resins - Determination of free-formaldehyde content (ISO 11402:2004)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN ISO 15106-1:2005Plastics - Film and sheeting - Determination of water vapourtransmission rate - Part 1: Humidity detection sensor method(ISO 15106-1:2003)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31


8/28


8

EN ISO 15106-2:2005Plastics - Film and sheeting - Determination of water vapourtransmission rate - Part 2: Infrared detection sensor method(ISO 15106-2:2003)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN ISO 15106-3:2005

Plastics - Film and sheeting - Determination of water vapourtransmission rate - Part 3: Electrolytic detection sensor method(ISO 15106-3:2003)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN ISO 176:2005Plastics - Determination of loss of plasticizers - Activated carbonmethod (ISO 176:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN ISO 18064:2005Thermoplastic elastomers - Nomenclature and abbreviated terms(ISO 18064:2003)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

N14 !EVI DE MATERIAL PLASTICEN ISO 580:2005Plastics piping and ducting systems - Injection-mouldedthermoplastics fittings - Methods for visually assessing theeffects of heating (ISO 580:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

S04 MBR"C"MINTE #I ECHIPAMENTE DEPROTEC!IE

EN 1385:1997/A1:2005Helmets for canoeing and whitewater sportsdoa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31EN ISO 6530:2005Protective clothing - Protection against liquid chemicals - Testmethod for resistance of materials to penetration by liquids(ISO 6530:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

S05 STOMATOLOGIEEN ISO 10139-1:2005Dentistry - Soft lining materials for removable dentures - Part 1:Materials for short-term use (ISO 10139-1:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

S07 ECHIPAMENT PENTRU ANESTEZIE #IRESUSCITARE

EN ISO 18777:2005Transportable liquid oxygen systems for medical use - Particularrequirements (ISO 18777:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN ISO 18778:2005Respiratory equipment - Infant monitors - Particular requirements(ISO 18778:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN ISO 18779:2005Medical devices for conserving oxygen and oxygen mixtures -Particular requirements (ISO 18779:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

S08 CALITATEA AERULUI

EN 13211:2001/AC:2005Air quality - Stationary source emissions - Manual method ofdetermination of the concentration of total mercurydoa: dop: dow:

S09 CALITATEA APEI #I A ALIMENT"RILOR CUAP"EN 12873-2:2005Influence of materials on water intended for human consumption- Influence due to migration - Part 2: Test method for non-metallicand non-cementitious site-applied materialsdoa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN 13443-2:2005Water conditioning equipment inside buildings - Mechanicalfilters - Part 2: Particle rating 1 m to less than 80 m -Requirements for performance, safety and testingdoa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN 872:2005Water quality - Determination of suspended solids - Method byfiltration through glass fibre filtersdoa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN ISO 11732:2005Water quality - Determination of ammonium nitrogen - Method byflow analysis (CFA and FIA) and spectrometric detection(ISO 11732:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

T02 AERONAUTIC"#I SPA!IU

EN 12312-5:2005Aircraft ground support equipment - Specific requirements -

Part 5: Aircraft fuelling equipmentdoa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN 2486:2005Aerospace series - Aluminium alloy AL-P2618A - Forging stockdoa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

EN 4287:2005Aerospace series - Aluminium alloy AL-P7010 - Forging stockdoa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31

T06 RECIPIENTE DE METAL #I DE MATERIALPLASTIC

EN 12285-2:2005

Workshop fabricated steel tanks - Part 2: Horizontal cylindricalsingle skin and double skin tanks for the aboveground storage offlammable and non-flammable water polluting liquidsdoa: 2005.05.31dop: 2005.08.31 dow: 2006.11.30T10 CONTAINERECEN/TS 14993:2005Swap bodies for combined transport - Stackable swap bodiestype A 1371 - Dimensions, design requirements and testingdoa: 2005.05.31dop: dow:

T12 C"RUCIOARE INDUSTRIALE

EN ISO 21281:2005Construction and layout of pedals of self-propelled sit-down rider-controlled industrial trucks - Rules for the construction and layoutof pedals (ISO 21281:2005)doa: 2005.05.31dop: 2005.08.31 dow: 2005.08.31


9/28


9

T14 AMBALAJECEN/TR 14520:2005Packaging - Reuse - Methods for assessing the performance of areuse systemdoa: dop: dow:

Z99 DIVERSE

CWA 15236:2005Analysis of standardization requirements and standardizationgaps for eProcurement in Europedoa: 2005.05.31dop: dow:

STANDARDE EUROPENE CENELEC APROBATE

n perioada 01.02.2005 28.02.2005

U01 SIMBOLURI GRAFICE PENTRU ELECTROTEHNIC"EN 82045-2:2005Document management -- Part 2: Metadata elements and

information reference modeldoa:2005-04-01 dop:2005-10-01 dow:2007-12-01

U19 INTERFEREN!E RADIOEN 61000-3-2:2000/A2:2005Electromagnetic compatibility (EMC) -- Part 3-2: Limits -Limits for harmonic current emissions (equipment inputcurrent


10/28


10

V18 COMENZI AUTOMATE

EN 60730-2-9:2002/A2:2005Automatic electrical controls for household and similar use --Part 2-9: Particular requirements for temperature sensingcontrolsdoa:2005-03-01 dop:2005-09-01 dow:2007-12-01

V23 DISPOZITIVE FOTOVOLTAICE

EN 62124:2005Photovoltaic (PV) stand-alone systems - Design verificationdoa:2005-05-01 dop:2005-11-01 dow:2008-02-01

V24 ECHIPAMENT PENTRU TEHNOLOGIAINFORMA!IEI

EN 50090-2-3:2005Home and Building Electronic Systems (HBES) -- Part 2-3:System overview - General functional safety requirements forproducts intended to be integrated in HBESdoa:2005-03-01 dop:2005-09-01 dow:2007-09-01

EN 50090-5-1:2005Home and Building Electronic Systems (HBES) -- Part 5-1:Media and media dependent layers - Power line for HBESClass 1doa:2005-03-01 dop:2005-09-01 dow:2007-09-01

V28 FIBRE OPTICE

CLC/TS 50433:2005Guidelines for paving the way for broadband "Broadband,25 Mbit/s and more for All"doa:2005-03-11 dop: dow:

CLC/TS 50430:2005Optical fibre cables - Gas pipe cables - Family specification forcables to be installed in high pressure gas pipes

doa:2005-03-11 dop: dow:CLC/TS 50431:2005Optical fibre cables - Drinking water pipe cables - Familyspecification for cables to be installed in drinking water pipesdoa:2005-03-11 dop: dow:

CLC/TS 50429:2005Optical fibre cables - Sewer cables - Family specification forcables to be installed in storm and sanitary sewersdoa:2005-03-11 dop: dow:

W08 CABLURI ELECTRICE

EN 60228:2005Conductors of insulated cables

doa:2005-03-01 dop:2005-09-01 dow:2007-12-01

W11 ACCESORII ELECTRICE

EN 60669-2-4:2005Switches for household and similar fixed electrical installations --Part 2-4: Particular requirements - Isolating switchesdoa:2005-04-01 dop:2005-10-01 dow:2007-10-01

W26

APARATE ELECTRICE DE UZ CASNIC

EN 60335-2-105:2005Household and similar electrical appliances - Safety --Part 2-105: Particular requirements for multifunctional showercabinetsdoa:2005-03-01 dop:2005-09-01 dow:2007-12-01

EN 60335-2-75:2004/A1:2005Household and similar electrical appliances - Safety -- Part 2-75:Particular requirements for commercial dispensing appliancesand vending machinesdoa:2005-03-01 dop:2005-09-01 dow:2007-12-01EN 60335-2-76:2005Household and similar electrical appliances - Safety -- Part 2-76:Particular requirements for electric fence energizersdoa:2005-05-01 dop:2005-11-01 dow:2007-11-01

EN 50416:2005Household and similar electrical appliances - Safety - Particularrequirements for commercial electric conveyor dishwashingmachinesdoa:2005-03-01 dop:2005-09-01 dow:2007-12-01

EN 60335-2-6:2003/A1:2005Household and similar electrical appliances - Safety -- Part 2-6:Particular requirements for stationary cooking ranges, hobs,ovens and similar appliancesdoa:2005-03-01 dop:2005-09-01 dow:2007-12-01

EN 60335-2-98:2003/A1:2005

Household and similar electrical appliances - Safety -- Part 2-98:Particular requirements for humidifiersdoa:2005-03-01 dop:2005-09-01 dow:2007-12-01

EN 60335-2-40:2003/A12:2005Amendment to subclause 7.12.1 of ENdoa:2005-05-01 dop:2005-11-01 dow:2007-11-01

EN 60335-2-58:2005Household and similar electrical appliances - Safety -- Part 2-58:Particular requirements for commercial electric dishwashingmachinesdoa:2005-03-01 dop:2005-09-01 dow:2007-12-01

STANDARDE EUROPENE ETSI APROBATE

n perioada 01.02.2005 28.02.2005

EN 301 515 Version 2.3.0Comitet Tehnic ETSI: RTGlobal System for Mobile communication (GSM); Requirements

for GSM operation on railways

EN 301 842-3 Version 1.1.1Comitet Tehnic ETSI: ERM TG25Electromagnetic compatibility and Radio spectrum Matters

(ERM); VHF air-ground Digital Link (VDL) Mode 4 radioequipment; Technical characteristics and methods ofmeasurement for ground-based equipment; Part 3: Additionalbroadcast aspects


11/28


12/28


12

TS 101 376-4-8 Version 1.3.1Comitet Tehnic ETSI: SES GMRGEO-Mobile Radio Interface Specifications (Release 1); Part 4:Radio interface protocol specifications; Sub-part 8: Mobile RadioInterface Layer 3 Specifications; GMR-1 04.008

TS 101 376-5-1 Version 1.2.1Comitet Tehnic ETSI: SES GMRGEO-Mobile Radio Interface Specifications (Release 1); Part 5:Radio interface physical layer specifications; Sub-part 1: PhysicalLayer on the Radio Path: General Description; GMR-1 05.001

TS 101 376-5-4 Version 1.3.1Comitet Tehnic ETSI: SES GMRGEO-Mobile Radio Interface Specifications (Release 1); Part 5:Radio interface physical layer specifications; Sub-part 4:Modulation; GMR-1 05.004

TS 101 376-5-5 Version 1.3.1Comitet Tehnic ETSI: SES GMRGEO-Mobile Radio Interface Specifications (Release 1); Part 5:Radio interface physical layer specifications; Sub-part 5: RadioTransmission and Reception; GMR-1 05.005

TS 101 376-5-6 Version 1.3.1

Comitet Tehnic ETSI: SES GMRGEO-Mobile Radio Interface Specifications (Release 1); Part 5:Radio interface physical layer specifications; Sub-part 6: RadioSubsystem Link Control; GMR-1 05.008

TS 101 376-5-7 Version 1.3.1Comitet Tehnic ETSI: SES GMRGEO-Mobile Radio Interface Specifications (Release 1); Part 5:Radio interface physical layer specifications; Sub-part 7: RadioSubsystem Synchronization; GMR-1 05.010

TS 101 524 Version 1.3.1Comitet Tehnic ETSI: TM 6Transmission and Multiplexing (TM); Access transmissionsystem on metallic access cables; Symmetric single pair highbitrate Digital Subscriber Line (SDSL)

TS 102 223 Version 7.0.0Comitet Tehnic ETSI: SCP TECSmart cards; Card Application Toolkit (CAT) (Release 7)

TS 102 250-3 Version 2.1.1Comitet Tehnic ETSI: STQ MOBILESpeech Processing, Transmission and Quality Aspects (STQ);QoS aspects for popular services in GSM and 3G networks;Part 3: Typical procedures for Quality of Service measurementequipment

TS 102 310 Version 6.1.0Comitet Tehnic ETSI: SCP TECSmart Cards Extensible Authentication Protocol support in theUICC (Release 6)

TS 102 354 Version 1.1.1Comitet Tehnic ETSI: SES BSMSatellite Earth Stations and Systems (SES); Broadband Satellite

Multimedia (BSM); Transparent Satellite Star - B (TSS-B);IP over Satellite (IPoS) Air Interface Specification[TIA-1008 (October 2003)]

TS 102 366 Version 1.1.1Comitet Tehnic ETSI: BROADCAS Digital AudioCompression (AC-3, Enhanced AC-3) Standard

TS 102 379 Version 1.1.1Comitet Tehnic ETSI: DECTDigital Enhanced Cordless Telecommunications (DECT); Fixednetwork Multimedia Message Service (F-MMS) InterworkingProfile

TS 102 385-1 Version 1.1.1Comitet Tehnic ETSI: BRANBroadband Radio Access Networks (BRAN); HiperMAN;

Conformance testing for the Data Link Control Layer (DLC);Part 1: Procotol Implementation Conformance Statement (PICS)proforma

TS 102 385-2 Version 1.1.1Comitet Tehnic ETSI: BRANBroadband Radio Access Networks (BRAN); HiperMAN;Conformance testing for the Data Link Control Layer (DLC);Part 2: Test Suite Structure and Test Purposes (TSS&TP)specification

TS 102 392 Version 1.1.1Comitet Tehnic ETSI: EcmaTC32Corporate telecommunication Networks (CN); Signallinginterworking between QSIG and SIP; Call Transfer

TS 102 393 Version 1.1.1Comitet Tehnic ETSI: EcmaTC32Corporate telecommunication Networks (CN); Signallingintetrworking between QSIG and SIP; Call Diversion

TS 102 394 Version 1.1.1Comitet Tehnic ETSI: EcmaTC32Near Field Communication Interfaces and Protocol-1 (NFCIP-1);Protocol Test Methods

PROIECTE DE STANDARDE EUROPENECEN SUPUSE ANCHETEI PUBLICE

n perioada 01.02.2005 28.02.2005

Proiectele de standarde de mai jos sunt supuse anchetei publice. Asupra acestor proiecte poate faceobserva"ii orice persoan! fizic! sau juridic!. Proiectele pot fi ob"inute de la ASRO preciznd indicativul #ititlul standardului. Observa"iile trebuie transmise pe adresa Asocia"iei de Standardizare din Romnia pn!latermenul indicat dup!fiecare proiect, termen care reprezint!sfr#itul anchetei publice.

B01 M"SURI DE SIGURAN!"CONTRAINCENDIILOR

prEN 54-25Fire detection and fire alarm systems - Part 25: Componentsusing radio links and system requirementsdea : 2005.08.17

B03 BETON

prEN 15167-1Ground granulated blastfurnace slag for use in concrete, mortarand grout - Part 1: Definitions, specifications and conformitycriteriadea : 2005.07.17


13/28


13

prEN 15167-2Ground granulated blast furnace slag for use in concrete, mortarand grout - Part 2: Confomity evalutationdea : 2005.07.17

B09 PROTEC!IE TERMIC"

prEN ISO 13786 revThermal performance of building components -- Dynamic thermalcharacteristics -- Calculation methods (ISO/DIS 13786:2005)dea : 2005.07.10prEN ISO 9229Thermal insulation - Definitions of terms (ISO/DIS 9229:2004)dea : 2005.07.03

B12 ZID"RII

prEN 14617-8Agglomerated stone - Test methods - Part 8: Determination ofresistance to f ixing (dowel hole)dea : 2005.05.09

B20 ECHIPAMENTE DE EVACUARE A APEIprEN 1085Wastewater treatment - Vocabularydea : 2005.07.10

B28 MBR"C"MINTE PENTRU PARDOSELI

prEN 1963Textile floor coverings - Tests using the Lisson Tretrad Machinedea : 2005.05.09

C04 STICL"RIE DE LABORATOR

prEN 14470-2

Fire safety storage cabinets - Part 2: Safety cabinets forpressurised gas cylindersdea : 2005.07.17

C09 AGEN!I ACTIVI DE SUPRAFA!"

prEN 15168Surface active agents - Determination of hydroxyl value -p-Toluensulfonyl isocyanate (TSI) method and potentiometrictitration with tetrabutylammonium hydroxidedea : 2005.07.17

F12 SISTEME DE PRELUCRARE A INFORMATIEI

prEN 12896Road transport and traffic telematics - Public transport -

Reference data modeldea : 2005.08.03

F17 DOCUMENTE ADMINISTRATIVE

prEN ISO 3166-1Codes for the representation of names of countries and theirsubdivisions - Part 1: Country codes (ISO/DIS 3166-1:2005)dea : 2005.07.24

F19 OPTIC"

prEN ISO 10942Ophthalmic instruments - Direct ophthalmoscopes(ISO/DIS 10942:2005)

dea : 2005.07.03prEN ISO 10943Ophthalmic instruments - Indirect ophthalmoscopes(ISO/DIS 10943:2005)dea : 2005.07.03

H18 CAZANE PENTRU NC"LZIRE CENTRAL"

prEN 15036-2Heating boilers - Test regulations for the airborne noiseemissions from heat generators - Part 2: Flue gas noiseemissions at the outlet of the heat

dea : 2005.07.17

H25 APARATE MARI CU GAZprEN 203-2-10Gas heated catering equipment - Part 2-10: Specificrequirements - Barbecues, charcoals and grillsdea : 2005.08.17

I12 RO!I #I CURELE DE TRANSMISIE

prEN ISO 15236-3Steel cord conveyor belts - Part 3: Special safety requirementsfor belts for use in underground installations(ISO/DIS 15236-3:2005)dea : 2005.07.17prEN ISO 22721Conveyor belts - Specification for rubber or plastics coveredconveyor belts of textile construction for underground mining(ISO/DIS 22721:2005)dea : 2005.07.17prEN ISO 252Conveyor belts - Ply adhesion between constitutive elements -Test method and requirements (ISO/DIS 252:2005)dea : 2005.07.03prEN ISO 283Conveyor belts - Full thickness tensile strength and elongation -Specifications and method of test (ISO/DIS 283:2005)dea : 2005.07.17prEN ISO 583Conveyor belts with a textile carcass - Tolerances on totalthickness and thickness of covers - Direct measurement method(ISO/DIS 583:2005)dea : 2005.07.03prEN ISO 703Conveyor belts - Troughability - Characteristics of transverseflexibility and test method (ISO/DIS 703:2005)dea : 2005.07.17

I17 MA#INI N GENERAL (INCLUSIVSECURITATEA)

prEN 15165Food processing machinery - Forming machines - Safety andhygiene requirementsdea : 2005.08.17prEN 15166Food processing machinery - Automatic back splitting machinesof butchery carcasses - Safety and hygiene requirementsdea : 2005.08.17I27 ECHIPAMENT PENTRU LUCR"RI DE

TERASAMENT #I N CONSTRUC!II

prEN 15162Machines and plants for mining and tooling of natural stone -Safety requirements for gang sawsdea : 2005.08.17prEN 15163

Machines and installations for the exploitation and processing ofnatural stone - Safety - Requirements for diamond wire sawsdea : 2005.07.17


14/28


15/28


15

S09 CALITATEA APEI #I A ALIMENT"RILOR CUAP"

prEN 15161Water conditioning equipment inside buildings - Installation,operation, maintenance and repairdea : 2005.08.17

S13 ERGONOMIEprEN 1005-5Safety of machinery - Human physical performance Part 5: Riskassessment for repetitive handling at high frequencydea : 2005.06.17prEN ISO 15536-2Ergonomics - Computer manikins and body templates - Part 2:Verification of functions and validation of dimensions forcomputer manikin systems (ISO/DIS 15536-2:2005)dea : 2005.07.17

S16 MIJLOACE AJUT"TOARE TEHNICE DEAJUTOR PENTRU INVALIZI

prEN ISO 11334-1Walking aids manipulated by one arm - Requirements and testmethods - Part 1: Elbow crutches (ISO/DIS 11334-1:2005)dea : 2005.07.10prEN ISO 9999Technical aids for persons with disabilities - Classification andterminology (ISO/DIS 9999:2005)dea : 2005.07.17

S18 STERILIZATOARE MEDICALE

prEN ISO 15883-4Washer-disinfectors - Part 4: Requirements and tests forwasher-disinfectors employing chemical disinfection forthermolabile endoscopes (ISO/DIS 15883-4:2005)

dea : 2005.04.24S21 LABORATOARE MEDICALE, PATOLOGIE

CLINIC"#I BIOSECURITATE

EN ISO 10993-10:2002/prA1Biological evaluation of medical devices - Part 10: Tests forirritation and delayed-type hypersensitivity Amendment 1(ISO 10993-10:2002/DAM 1:2005)dea : 2005.05.23EN ISO 10993-12:2004/prA1Biological evaluation of medical devices - Part 12: Samplepreparation and reference materials - Amendment 1(ISO 10993-12:2004/DAM 1:2005)dea : 2005.05.23EN ISO 10993-4:2002/prA1Biological evaluation of medical devices - Part 4: Selectionof tests for interactions with blood - Amendment 1(ISO 10993-4:2002/DAM 1:2005)dea : 2005.05.23

prEN ISO 10993-11Biological evaluation of medical devices - Part 11: Tests forsystemic toxicity (ISO/DIS 10993-11:2005)dea : 2005.02.08prEN ISO 10993-6Biological evaluation of medical devices - Part 6: Tests for localeffects after implantation (ISO/DIS 10993-6:2005)dea : 2005.05.23prEN ISO 20776-1Susceptibility testing of infectious agents and evaluation ofperformance of antimicrobial susceptibility devices - Part 1:Reference methods for testing the in vitro activity of antimicrobialagents against bacteria involved in infectious diseases(ISO/DIS 20776-1:2005)dea : 2005.06.06

S27 DE#EURI - CARACTERIZARE, TRATARE #IEVACUARE

prEN 15169Characterization of waste - Determination of loss on ignition inwaste, sludge and sedimentsdea : 2005.05.09prEN 15170Characterization of sludges - Calorific Value (determination ofgross and net calorific values)dea : 2005.07.17prEN 15171Characterization of sludges - Determination of adsorbableorganically bound halogensdea : 2005.08.17

T01 CONSTRUC!II NAVALE #I STRUCTURIMARITIME

prEN ISO 8665 revSmall craft - Marine propulsion reciprocating internal combustionengines - Power measurements and declarations(ISO/DIS 8665:2005)dea : 2005.04.10

T14 AMBALAJE

prEN ISO 23667ICBs - Transport packaging for dangerous goods - Plasticscompatibility testing (ISO/DIS 23667:2005)dea : 2005.07.10

T16 ASCENSOARE #I SC"RI RULANTE

prEN 15178

Elements for the identification of products in emergency inquiries dea : 2005.07.24


16/28


16

PROIECTE DE STANDARDE EUROPENECENELEC SUPUSE ANCHETEI PUBLICE

n perioada 01.02.2005 28.02.2005


U01 SIMBOLURI GRAFICE PENTRUELECTROTEHNIC"

prEN 62141:2005Helical-scan digital video cassette recording format using 12,65mm magnetic tape and incorporating MPEG-4 compression -Type D-16 Formatdea:2005-07-15prEN 60205:2005Calculation of the effective parameters of magnetic piece partsdea:2005-07-29EN 61076-7-100:2005Connectors for electronic equipment -- Part 7-100: Cable outletaccessories - Detail specification for a metric cable sealingconsisting of an integrated part of heavy-duty rectangular orcircular connector hoods and a sealing system

dea:2005-07-15prEN 61338-1-4:2005Waveguide type dielectric resonators -- Part 1-4: Generalinformation and test conditions - Measurement method ofcomplex relative permittivity for dielectric resonator materials atmillimeter-wave frequencydea:2005-07-15prEN 61076-3-104:2005Connectors for electronic equipment -- Part 3-104: Rectangularconnectors - Detail specification for 8-way, shielded free andfixed connectors, for data transmissions with frequencies upto 1 000 MHzdea:2005-07-15prEN 60512-1-100:2005Connectors for electronic equipment - Tests and measurements -- Part 1-100: General - Applicable publicationsdea:2005-07-15prEN 61925:2005Multimedia systems and equipment - Multimedia home serversystems - The vocabulary of home serverdea:2005-07-29U04 FLUIDE ELECTROIZOLANTEprEN 60836:2005Specifications for unused silicone insulating liquids forelectrotechnical purposes

dea:2005-04-15

U11 NCERC"RI MECANO-CLIMATICE PENTRUAPARATURA ELECTROTEHNIC"

prEN 60068-2-80:2005Environmental testing -- Part 2-80: Tests - Test Fi: Vibration -Mixed modedea:2005-04-15

U19 INTERFEREN!E RADIO

EN 55016-2-3:2004/prA2:2005Specification for radio disturbance and immunity measuringapparatus and methods -- Part 2-3: Methods of measurement ofdisturbances and immunity - Radiated disturbancemeasurements (Amplitude probability distribution (APD) -Measurement method)dea:2005-07-22

EN 55016-2-3:2004/prA1:2005Specification for radio disturbance and immunity measuringapparatus and methods -- Part 2-3: Methods of measurement ofdisturbances and immunity - Radiated disturbancemeasurements (Measurement methods above 1 GHz)dea:2005-04-15prEN 61000-6-4:2005Electromagnetic compatibility (EMC) -- Part 6-4: Genericstandards - Emission standard for industrial environmentsdea:2005-07-15prEN 61000-6-3:2005Electromagnetic compatibility (EMC) -- Part 6-3: Genericstandards - Emission standard for residential, commercial and

light-industrialdea:2005-07-15EN 55016-1-2:2004/prA2:2005Update of LISN specificationsdea:2005-08-05V01 ECHIPAMENTE DE RADIOCOMUNICA!IICLC/prTR 50460:2005Cable networks for television signals, sound signals andinteractive services - System guidelines for analogue opticaltransmission systemsdea:2005-05-20V06 CONDENSATOARE #I REZISTOARE

prEN 60738-1:2005Thermistors - Directly heated positive step-function temperaturecoefficient -- Part 1: Genericdea:2005-07-22


17/28


17

V07 APARATUR"NUCLEAR"prEN 61526Radiation protection instrumentation - Measurement of personaldose equivalents Hp(10) and Hp(0,07) for X, gamma, neutronand beta radiations - Direct reading personal dose equivalentmeters and monitorsdea:2005-06-03prEN 60405Nuclear instrumentation - Constructional requirements andclassification of radiometricdea:2005-06-03V08 CABLURI #I CONDUCTOARE PENTRU

TELECOMUNICA!II

prEN 60708:2005Low-frequency cables with polyolefin insulation and moisturebarrier polyolefin sheathdea:2005-04-29V10 COMPONENTE ELECTROMECANICEprEN 60297-3-104:2005Mechanical structures for electronic equipment - Dimensions ofmechanical structures of the 482,6 mm (19 in) series --Part 3-104: Connector dependent interface dimensions ofsubracks and plug-in unitsdea:2005-08-05prEN 60917-2-3:2005Modular order for the development of mechanical structures forelectronic equipment practices -- Part 2-3: Sectional standard -Interface coordination dimensions for the 25 mm equipmentpractice - Extended detail standard - Dimensions for subracksand chassis, backplanes, front panels and plug-in unitsdea:2005-08-05V11 DISPOZITIVE PIEZOELECTRICE

prEN 61019-2:2005Surface acoustic wave (SAW) resonators -- Part 2: Guide to theusedea:2005-04-22V12 DISPOZITIVE MAGNETICEprEN 62323:2005Dimensions of half pot cores made of magnetic oxides forinductive proximity switchesdea:2005-05-06prEN 61185:2005Magnetic oxide cores (ETD-cores) intended for use in powersupply applications - Dimensionsdea:2005-05-06V15 ECHIPAMENTE ELECTROMEDICALEprEN 62274:2005Medical electrical equipment - Safety of radiotherapy record andverify systemsdea:2005-04-15EN 60601-2-37:2001/prA2:2005Medical electrical equipment -- Part 2-37: Particular requirementsfor the safety of ultrasonic medical diagnostic and monitoringequipmentdea:2005-07-15V16 REGULATOARE DE PROCESprEN 61499-1:2005Function blocks -- Part 1: Architecturedea:2005-04-15

prEN 61499-2:2005Function blocks -- Part 2: Software tools requirements dea:2005-04-15V17 ECHIPAMENTE PENTRU M"SUR"RI

ELECTRONICE

prEN 50436-1:2005Alcohol interlocks - Test methods and performance requirements-- Part 1: Part 1: Instruments for drink- driving-offender programs dea:2005-04-08V21 SISTEME DE ALARM"CLC/prTR 50456:2005Guidelines to achieving compliance with EC directives for alarmsystemsdea:2005-06-03V24 ECHIPAMENT PENTRU TEHNOLOGIA

INFORMA!IEI

prEN 62002-1:2005Mobile and portable DVB-T/H radio access -- Part 1: Interface

specification (TA1)dea:2005-07-15prEN 62002-2:2005Mobile and portable DVB-T/H radio access -- Part 1: Interfaceconformance testing (TA1)dea:2005-07-15prEN 62298-3:2005Teleweb application -- Part 3: Superteletext profiledea:2005-04-15V27 SISTEME #I ECHIPAMENTE AUDIO,

VIDEO #I AUDIO-VIZUALE

prEN 62298-1:2005

Teleweb application -- Part 1: General descriptiondea:2005-04-15prEN 62298-2:2005Teleweb application -- Part 2: Delivery methodsdea:2005-04-15V28 FIBRE OPTICEprEN 61755-3-4:2005Fibre optic connector optical interface -- Part 3-4: Opticalinterface flat PC endface rectangular ferrule, single mode fibredea:2005-07-15prEN 61314-1:2005Fibre optic fan-outs -- Part 1: Generic specificationdea:2005-04-15prEN 61754-23:2005Fibre optic connector interfaces -- Part 23: Type LX.5 connectorfamilydea:2005-04-15prEN 62150-1:2005Fibre optic active components and devices - Test andmeasurement procedures -- Part 1: General and guidancedea:2005-04-15prEN 61755-3-3:2005Fibre optic connector optical interface -- Part 3-3: Opticalinterface angled PC endface rectangular ferrule, single modefibredea:2005-07-15


18/28


18

prEN 61300-3-37:2005Fibre optic interconnecting devices and passive components -Basic test and measurement procedures -- Part 3-37:Examinations and measurements - Endface angle of angle-polished optical fibresdea:2005-04-15W01 MA#INI ELECTRICE ROTATIVECLC/prTS 60034-25:2005Rotating electrical machines -- Part 25: Guide for the design andperformance of cage induction motors specifically designed forconverter supplydea:2005-06-03W08 CABLURI ELECTRICEprEN 45510-2-9:2005Guide for procurement of power station equipment -- Part 2-9:Electrical equipment - Cabling systemsdea:2005-08-26prHD 629.2 S2:2005Tests requirements for accessories for power cables with rated

voltage from 3,6/6 (7,2) kV up to and including 20,8/36 (42) kV --Part 2 : Cables with impregnated paper insulationdea:2005-05-27prHD 629.1 S2:2005Test requirements on accessories for use on power cables ofrated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV -- Part 1:Cables with extruded insulationdea:2005-05-27W09 ACUMULATOAREprEN 61427:2005Secondary cells and batteries for photovoltaic energy systemes(PVES) - General requirements and methods of testdea:2005-04-22W11 ACCESORII ELECTRICEprEN 61537:2005Cable tray systems and cable ladder systems for cablemanagementdea:2005-07-15prEN 60670-22:2005Boxes and enclosures for electrical accessories for householdand similar fixed electrical installations -- Part 22: Particularrequirements for connecting boxesand enclosuresdea:2005-08-26prEN 60670-21:2005

Boxes and enclosures for electrical accessories for householdand similar fixed electrical installations -- Part 21: Particularrequirements for boxes and enclosures with provision forsuspension meansdea:2005-08-26EN 61242:1997/prA12:2005Electrical accessories - Cable reels for household and similarpurposesdea:2005-06-03W13 ECHIPAMENTE ELECTRICE PENTRU

ATMOSFER"EXPLOZIV"

prEN 60079-26:2005Electrical apparatus for explosive gas atmospheres -- Part 26:

Construction, test and marking of Group II Zone 0 electricalapparatusdea:2005-07-29

prEN 60079-28:2005Electrical apparatus for explosive atmopheres -- Part 28:Protection of equipment and transmission systems using opticalradiationdea:2005-07-29W16 L"MPI #I CORPURI DE ILUMINAT

prEN 60598-2-11:2005Luminaires -- Part 2-11: Particular requirements - Aquariumluminairesdea:2005-04-29W25 PERFORMAN!ELE APARATELOR

ELECTROCASNICE

EN 60350:1999/prA1:2005Electric cooking ranges, ovens and grills for household use -Methods for measuring performance -- Subclause 7.4: Proposalfor measuring performance of hobs with electronic components(including ceramic and induction hobs)dea:2005-04-15EN 61591:1997/prA1:2005

Household range hoods - Methods for measuring performancedea:2005-07-22prEN 62301:2005Household electrical appliances - Measurement of standby powerdea:2005-04-15prEN 62301:2005/prAA:2005Household electrical appliances - Measurement of standby powerdea:2005-04-15W26 APARATE ELECTRICE DE UZ CASNICEN 60335-2-40:2003/prA1:2005Household and similar electrical appliances - Safety -- Part 2-40:Particular requirements for electrical heat pumps, air-conditioners

and dehumidifiersdea:2005-04-29prEN 50338:2005 (Second vote)Safety of household and similar electrical appliances - Particularrequirements for pedestrian-controlled battery powered electricallawn mowersdea:2005-04-22EN 60335-2-25:2002/prA1:2005Household and similar electrical appliances - Safety -- Part 2-25:Particular requirements for microwave ovens - Proposal to amendClauses 7.12, 11.2, 11.3 and 19.1dea:2005-04-15prEN 60745-2-19:2005 (Second vote)

Hand-held motor-operated electric tools - Safety -- Part 2-19:Particular requirements for jointersdea:2005-05-06W27 INSTALA!II ELECTRICE N CONSTRUC!IIprHD 60364-5-51:2005Electrical installations of buildings -- Part 5-51: Selection anderection of electrical equipment - Common rulesdea:2005-05-20W37 TEHNOLOGIA PILELOR DE COMBUSTIEprEN 62282-5:2005Fuel cell technologies -- Part 5: Portable fuel cell appliances -Safety and performance requirements

dea:2005-07-29


19/28


19

PROIECTE DE STANDARDE EUROPENEETSI SUPUSE ANCHETEI PUBLICE

n perioada 01.02.2005 28.02.2005


EN 301 040 Draft Version 2.0.5Comitet Tehnic ETSI: TETRA 6Terrestrial Trunked Radio (TETRA); Security; Lawful Interception(LI) interfacedea: 2005.06.10


20/28


20

STANDARDIZAREA INTERNA!IONAL"

n aceast! sec"iune sunt cuprinse standardele ISO elaborate n cadrul Organiza"iei Interna"ionale deStandardizare #i standardele CEI elaborate n cadrul Comisiei Electrotehnice Interna"ionale, publicate ncursul lunii februarie 2005.

COMISIA ELECTROTEHNIC"INTERNA!IONAL"

IEC_TC_2 MA#INI ELECTRICE ROTATIVE

IEC 60034-3 Ed. 5.0 b 2005-02-17Rotating electrical machines - Part 3: Specific requirements forcylindrical rotor synchronous machines

IEC_TC_17 APARATAJ ELECTRIC

IEC 62271-102 Ed. 1.0 b Cor.3 2005-02-23Corrigendum 3 - High-voltage switchgear and controlgear -Part 102: Alternating current disconnectors and earthingswitches

IEC_TC_20 CABLURI ELECTRICE

IEC 60055-1 Amd.1 Ed. 5.0 b 2005-02-07Amendment 1 - Paper-insulated metal-sheathed cables for ratedvoltages up to 18/30 kV (with copper or aluminium conductorsand excluding gas-pressure and oil-filled cables) - Part 1: Testson cables and their accessories

IEC 60055-2 Amd.2 Ed. 1.0 b 2005-02-07Amendment 2 - Paper-insulated metal-sheathed cables for ratedvoltages up to 18/30 kV (with copper or aluminium conductorsand excluding gas-pressure and oil-filled cables) - Part 2:General and construction requirements

IEC 60502-4 Ed. 2.0 b 2005-02-10Power cables with extruded insulation and their accessories for

rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV(Um = 36 kV) - Part 4: Test requirements on accessories forcables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV(Um = 36 kV)

IEC_TC_23 ACCESORII ELECTRICE

IEC 60670-24 Ed. 1.0 b 2005-02-23Boxes and enclosures for electrical accessories for householdand similar fixed electrical installations - Part 24: Particularrequirements for enclosures for housing protective devices andsimilar power consuming devices

IEC_TC_27 ECHIPAMENT DE NC"LZIRE ELECTRIC"INDUSTRIAL"

IEC 60519-3 Ed. 3.0 b 2005-02-17Safety in electroheat installations - Part 3: Particular requirementsfor induction and conduction heating and induction meltinginstallations

IEC_TC_40 CONDENSATOARE #I REZISTOARE

ELECTRONICEIEC 60384-23 Ed. 1.0 en 2005-02-10Fixed capacitors for use in electronic equipment - Part 23:Sectional specification - Fixed surface mount metallizedpolyethylene naphthalate film dielectric DC capacitors

IEC 60384-23-1 Ed. 1.0 en 2005-02-10Fixed capacitors for use in electronic equipment - Part 23-1:Blank detail specification - Fixed surface mount metallizedpolyethylene naphthalate film dielectric DC capacitors -

Assessment level EZ

IEC 60939-1 Ed. 2.0 en 2005-02-10Passive filter units for electromagnetic interference suppression -Part 1: Generic specification

IEC 60939-2 Ed. 2.0 en 2005-02-10Passive filter units for electromagnetic interference suppression -Part 2: Sectional specification - Passive filter units for whichsafety tests are appropriate - Test methods and generalrequirements

IEC 62319-1 Ed. 1.0 en 2005-02-15Polymeric thermistors - Directly heated positive step functiontemperature coefficient - Part 1: Generic specification

IEC 62319-1-1 Ed. 1.0 en 2005-02-15Polymeric thermistors - Directly heated positive step functiontemperature coefficient - Part 1-1: Blank detail specification -Current limiting application

IEC_TC_45 APARATUR"NUCLEAR"

IEC 61226 Ed. 2.0 b 2005-02-17Nuclear power plants - Instrumentation and control systemsimportant to safety - Classification of instrumentation and controlfunctions

IEC 61526 Ed. 2.0 b 2005-02-14Radiation protection instrumentation - Measurement of personaldose equivalents Hp(10) and Hp(0,07) for X, gamma, neutronand beta radiations - Direct reading personal dose equivalentmeters and monitors

IEC_TC_48 COMPONENTE ELECTROMECANICE#ISTRUCTURI MECANICE PENTRUECHIPAMENTUL ELECTRONIC

IEC 60603-7-4 Ed. 1.0 b 2005-02-09

Connectors for electronic equipment - Part 7-4: Detailspecification for 8-way, unshielded, free and fixed connectors, fordata transmissions with frequencies up to 250 MHz


21/28


21

IEC_TC_59 APTITUDINILE DE FUNC!IONARE ALEAPARATELOR ELECTROCASNICE

IEC 60704-2-6 Ed. 2.0 b 2005-02-23Household and similar electrical appliances - Test code for thedetermination of airborne acoustical noise - Part 2-6: Particularrequirements for tumble dryers

IEC_TC_61 SECURITATEA APARATELOR ELECTRICEDE UZ CASNIC #I SIMILARE

IEC 60335-2-24 Amd.1 Ed. 6.0 en 2005-02-09Amendment 1 - Household and similar electrical appliances -Safety - Part 2-24: Particular requirements for refrigeratingappliances, ice-cream appliances and ice-makers

IEC 60335-2-36 Amd.1 Ed. 5.0 b 2005-02-09Amendment 1 - Household and similar electrical appliances -Safety - Part 2-36: Particular requirements for commercialelectric cooking ranges, ovens, hobs and hob elements

IEC 60335-2-6 Ed. 5.0 b 2005-02-24Household and similar electrical appliances - Safety - Part 2-6:Particular requirements for stationary cooking ranges, hobs,ovens and similar appliances

IEC 60335-2-89 Amd.1 Ed. 1.0 b 2005-02-09Amendment 1 - Household and similar electrical appliances -Safety - Part 2-89: Particular requirements for commercialrefrigerating appliances with an incorporated or remote refrigerantcondensing unit or compressor

IEC_TC_62 ECHIPAMENTE ELECTROMEDICALE

IEC 61675-2 Ed. 1.1 en 2005-02-07Radionuclide imaging devices - Characteristics and testconditions - Part 2: Single photon emission computedtomographs

IEC_TC_66 SIGURAN!A ECHIPAMENTULUI DEM"

SUR"

, CONTROL#

I LABORATOR

IEC 61010-2-051 Ed. 2.0 b 2005-02-23Safety requirements for electrical equipment for measurement,control, and laboratory use - Part 2-051: Particular requirementsfor laboratory equipment for mixing and stirring

IEC_TC_91 TEHNOLOGIA ASAMBL"RIICOMPONENTELOR ELECTRONICE

IEC 60068-2-58 Ed. 3.0 b 2005-02-23Environmental testing - Part 2-58: Tests - Test Td: Test methodsfor solderability, resistance to dissolution of metallization and tosoldering heat of surface mounting devices (SMD)

IEC 62137 Ed. 1.0 b 2005-02-14Environmental and endurance testing - Test methods for

surface-mount boards of area array type packages FBGA, BGA,FLGA, LGA, SON and QFN

IEC_TC_94 RELEE ELECTRICE DE TOT SAU NIMIC

IEC 61810-2 Ed. 1.0 b 2005-02-07Electromechanical elementary relays - Part 2: Reliability

IEC_TC_106 METODE DE EVALUARE A CMPURILORELECTRICE, MAGNETICE #IELECTROMAGNETICE ASOCIATE CUEXPUNEREA CORPULUI UMAN

IEC 62209-1 Ed. 1.0 b 2005-02-18Human exposure to radio frequency fields from hand-held and

body-mounted wireless communication devices - Human models,instrumentation, and procedures - Part 1: Procedure to determinethe specific absorption rate (SAR) for hand-held devices used inclose proximity to the ear (frequency range of 300 MHz to 3 GHz)

CISPR COMITET INTERNA!IONAL SPECIALIZAT NINTERFEREN!A RADIO

CISPR 12 Amd.1 Ed. 5.0 b 2005-02-24Amendment 1 - Vehicles, boats, and internal combustion enginedrive devices - Radio disturbance characteristics - Limits andmethods of measurement for the protection of receivers exceptthose installed in the vehicle/boat/device itself or in adjacent

vehicles/boats/devicesCISPR 16-1-4 Ed. 1.0 b Cor.1 2005-02-07Corrigendum 1 - Specification for radio disturbance and immunitymeasuring apparatus and methods - Part 1-4: Radio disturbanceand immunity measuring apparatus - Ancillary equipment -Radiated disturbances

CISPR 16-4-1 Ed. 1.1 en 2005-02-21Specification for radio disturbance and immunity measuringapparatus and methods - Part 4-1: Uncertainties, statistics andlimit modelling - Uncertainties in stardardized EMC tests

CISPR 20 Ed. 5.2 b 2005-02-09Sound and television broadcast receivers and associatedequipment - Immunity characteristics - Limits and methods ofmeasurement

ORGANIZA!IA INTERNA!IONAL"DE STANDARDIZARE

JTC 1 - TEHNOLOGIA INFORMA!IEI

ISO/IEC 16512-1:2005Information technology -- Relayed Multicast Control Protocol(RMCP) -- Part 1: Framework

ISO/IEC TR 9294:2005Information technology -- Guidelines for the management of

software documentation (available in English only)

ISO/IEC 24570:2005Software engineering -- NESMA functional size measurementmethod version 2.1 -- Definitions and counting guidelines for theapplication of Function Point Analysis (available in English only)

ISO/IEC TR 24718:2005Information technology -- Programming languages -- Guide forthe use of the Ada Ravenscar Profile in high integrity systems(available in English only)

ISO/IEC 17341:2005Information technology -- Data interchange on 120 mm and80 mm optical disk using +RW format -- Capacity: 4,7 Gbytesand 1,46 Gbytes per side (Recording speed up to 4X) (available

in English only)

ISO/IEC 17344:2005Information technology -- Data interchange on 120 mm and80 mm Optical disk using +R format -- Capacity: 4,7 Gbytes and1,46 Gbytes per side (Recording speed up to 4X) (available inEnglish only)

ISO/IEC 17345:2005Information technology -- Data interchange on 130 mm rewritableand write once read many ultra density optical (UDO) diskcartridges -- Capacity: 30 Gbytes per cartridge (first generation)(available in English only)

ISO/IEC 17346:2005Information technology -- Data interchange on 90 mm optical disk

cartridges -- Capacity: 1,3 Gbytes per cartridge (available inEnglish only)


22/28


22

ISO/IEC TR 15443-1:2005Information technology -- Security techniques -- A framework forIT security assurance -- Part 1: Overview and framework(available in English only)

ISO/IEC 18032:2005Information technology -- Security techniques -- Prime numbergeneration (available in English only)

ISO/IEC 13818-4:2004/Amd 1:2005MPEG-2 IPMP conformance testing (available in English only)

ISO/IEC 15938-1:2002/Amd 1:2005Systems extensions (available in English only)

ISO/IEC 15938-5:2003/Amd 2:2005Multimedia description schemes user preference extensions(available in English only)

ISO/IEC TR 18046:2005Information technology -- Automatic identification and datacapture techniques -- Radio frequency identification deviceperformance test methods (available in English only)

TC 2 - ELEMENTE DE ASAMBLARE

ISO 16047:2005Fasteners -- Torque/clamp force testing

ISO 15065:2005Countersinks for countersunk head screws with headconfiguration in accordance with ISO 7721

TC 5 - !EVI DIN METALE FEROASE #I RACORDURIMETALICE

ISO 4179:2005Ductile iron pipes and fittings for pressure and non-pressurepipelines -- Cement mortar lining

TC 6 - HRTIE, CARTON #I CELULOZ"

ISO 534:2005Paper and board -- Determination of thickness, density andspecific volume

ISO 5636-4:2005Paper and board -- Determination of air permeance (mediumrange) -- Part 4: Sheffield method

ISO 8791-3:2005Paper and board -- Determination of roughness/smoothness (airleak methods) -- Part 3: Sheffield method (available in Englishonly)

TC 17 - O!ELISO 17053:2005Steel and iron -- Determination of oxygen -- Infrared method afterfusion under inert gas (available in English only)

ISO 5952:2005Continuously hot-rolled steel sheet of structural quality withimproved atmospheric corrosion resistance (available in Englishonly)

ISO 13976:2005Hot-rolled steel sheet in coils of structural quality and heavythickness (available in English only)

ISO 14590:2005

Cold-reduced steel sheet of high tensile strength and low yieldpoint with improved formability

ISO 16160:2005Continuously hot-rolled steel sheet products -- Dimensional andshape tolerances (available in English only)

ISO 16162:2005Continuously cold-rolled steel sheet products -- Dimensional andshape tolerances (available in English only)

ISO 16163:2005Continuously hot-dipped coated steel sheet products --Dimensional and shape tolerances (available in English only)

ISO 20805:2005Hot-rolled steel sheet in coils of higher yield strength withimproved formability and heavy thickness for cold forming(available in English only)

ISO 16020:2005Steel for the reinforcement and prestressing of concrete --Vocabulary

TC 22 - VEHICULE RUTIERE

ISO 6856:2005Road vehicles -- Unscreened high-voltage ignition cableassemblies -- Test methods and general requirements (availablein English only)

ISO 4925:2005Road vehicles -- Specification of non-petroleum-base brake fluidsfor hydraulic systems

ISO 11451-1:2005Road vehicles -- Vehicle test methods for electrical disturbancesfrom narrowband radiated electromagnetic energy -- Part 1:General principles and terminology

ISO 11451-2:2005Road vehicles -- Vehicle test methods for electrical disturbancesfrom narrowband radiated electromagnetic energy -- Part 2:Off-vehicle radiation sources

ISO 11452-1:2005Road vehicles -- Component test methods for electricaldisturbances from narrowband radiated electromagnetic energy --Part 1: General principles and terminology

TC 23 - TRACTOARE #I MATERIALE AGRICOLE #IFORESTIERE

ISO 14131:2005Agricultural sprayers -- Boom steadiness -- Test methods(available in English only)

ISO 22868:2005

Forestry machinery -- Noise test code for portable hand-heldmachines with internal combustion engine -- Engineering method(Grade 2 accuracy)

TC 27 - COMBUSTIBILI MINERALI SOLIZI

ISO 11760:2005Classification of coals (available in English only)

TC 29 - SCULE MICI

ISO/TS 13399-2:2005Cutting tool data representation and exchange -- Part 2:Reference dictionary for the cutting items (available in Englishonly)

ISO 6104:2005Superabrasive products -- Rotating grinding tools with diamondor cubic boron nitride -- General survey, designation andmultilingual nomenclature


23/28


23

ISO 1832:2004/Cor 1:2005

TC 34 - PRODUSE ALIMENTARE

ISO 21572:2004/Cor 1:2005

ISO 16305:2005Butter -- Determination of firmness

ISO 7251:2005Microbiology of food and animal feeding stuffs -- Horizontalmethod for the detection and enumeration of presumptiveEscherichia coli -- Most probable number technique

TC 35 - VOPSELE #I LACURI

ISO 20566:2005Paints and varnishes -- Determination of the scratch resistanceof a coating system using a laboratory car-wash

TC 38 - TEXTILE

ISO 2307:2005Fibre ropes -- Determination of certain physical and mechanicalproperties

TC 42 - FOTOGRAFIE

ISO 12231:2005Photography -- Electronic still picture imaging -- Vocabulary(available in English only)

TC 44 - SUDARE #I PROCEDEE CONEXE

ISO 15614-10:2005Specification and qualification of welding procedures for metallicmaterials -- Welding procedure test -- Part 10: Hyperbaric drywelding

ISO 18276:2005Welding consumables -- Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strengthsteels -- Classification

ISO 15614-13:2005Specification and qualification of welding procedures for metallicmaterials -- Welding procedure test -- Part 13: Resistance buttand flash welding

ISO/TR 17671-6:2005Welding -- Recommendations for welding of metallic materials --Part 6: Laser beam welding (available in English only)

TC 45 - ELASTOMERI #I PRODUSE PE BAZ"DEELASTOMERI

ISO 1403:2005Rubber hoses, textile-reinforced, for general-purpose waterapplications -- Specification (available in English only)

ISO 3861:2005Rubber hoses for sand and grit blasting -- Specification (availablein English only)

ISO 6224:2005Thermoplastics hoses, textile-reinforced, for general-purposewater applications -- Specification (available in English only)

TC 58 - BUTELII PENTRU GAZ

ISO 6406:2005

Gas cylinders -- Seamless steel gas cylinders -- Periodicinspection and testing (available in English only)

TC 61 - MATERIALE PLASTICE

ISO 14853:2005Plastics -- Determination of the ultimate anaerobic biodegradationof plastic materials in an aqueous system -- Method bymeasurement of biogas production

ISO 1268-10:2005

Fibre-reinforced plastics -- Methods of producing test plates --Part 10: Injection moulding of BMC and other long-fibre mouldingcompounds -- General principles and moulding of multipurposetest specimens

ISO 1268-11:2005Fibre-reinforced plastics -- Methods of producing test plates --Part 11: Injection moulding of BMC and other long-fibre mouldingcompounds -- Small plates

TC 67 - MATERIALE, ECHIPAMENT #I STRUCTURIMARINE PENTRU INDUSTRIILE PETROLULUI #IGAZELOR NATURALE

ISO 15156-3:2003/Cor 1:2005(available in English only)

TC 68 - SERVICII FINANCIARE

ISO 7341:2005Banking -- Nostro accounts reconciliation (available in Englishonly)

TC 72 - MA#INI TEXTILE #I MA#INI PENTRU CUR"!ATDINAMIC #I SP"LAT INDUSTRIAL

ISO 11111-1:2005Textile machinery -- Safety requirements -- Part 1: Commonrequirements

ISO 11111-2:2005Textile machinery -- Safety requirements -- Part 2: Spinningpreparatory and spinningmachines

ISO 11111-3:2005Textile machinery -- Safety requirements -- Part 3: Nonwovenmachinery

ISO 11111-4:2005Textile machinery -- Safety requirements -- Part 4: Yarnprocessing, cordage and rope manufacturing machinery

ISO 11111-5:2005Textile machinery -- Safety requirements -- Part 5: Preparatorymachinery to weaving and knitt ing

ISO 11111-6:2005

Textile machinery -- Safety requirements -- Part 6: Fabricmanufacturing machinery

ISO 11111-7:2005Textile machinery -- Safety requirements -- Part 7: Dyeing andfinishing machinery

TC 76 - APARATUR"DE TRANSFUZIE, PERFUZIE,INJEC!IE, PENTRU UTILIZARE MEDICAL"#IFARMACEUTIC"

ISO 11418-1:2005Containers and accessories for pharmaceutical preparations --Part 1: Drop-dispensing glass bottles (available in English only)

ISO 11418-2:2005

Containers and accessories for pharmaceutical preparations --Part 2: Screw-neck glass bottles for syrups (available in Englishonly)


24/28


24

ISO 11418-3:2005Containers and accessories for pharmaceutical preparations --Part 3: Screw-neck glass bottles (veral) for solid and liquiddosage forms (available in English only)

ISO 11418-4:2005Containers and accessories for pharmaceutical preparations --Part 4: Tablet glass bottles (available in English only)

TC 83 - ECHIPAMENTE PENTRU SPORT #I RECREERE

ISO 14790:2005Snowboard plate-bindings without a release mechanism --Requirements and test methods

ISO 15344:2005Snowboard step-in bindings -- Requirements and test methods

TC 85 - ENERGIE NUCLEAR"

ISO 11929-5:2005Determination of the detection limit and decision threshold forionizing radiation measurements -- Part 5: Fundamentals andapplications to counting measurements on filters duringaccumulation of radioactive material

ISO 11929-6:2005Determination of the detection limit and decision threshold forionizing radiation measurements -- Part 6: Fundamentals andapplications to measurements by use of transient mode

ISO 11929-7:2005Determination of the detection limit and decision threshold forionizing radiation measurements -- Part 7: Fundamentals andgeneral applications

ISO 11929-8:2005Determination of the detection limit and decision threshold forionizing radiation measurements -- Part 8: Fundamentals andapplication to unfolding of spectrometric measurements withoutthe influence of sample treatment

ISO 12183:2005Nuclear fuel technology -- Controlled-potential coulometric assayof plutonium

ISO 16793:2005Nuclear fuel technology -- Guide for ceramographic preparationof UO2 sintered pellets for microstructure examination

TC 105 - CABLURI DE O!EL

ISO 21669:2005Steel wire ropes -- Determination of rotational properties

TC 106 - STOMATOLOGIEISO 10139-1:2005Dentistry -- Soft lining materials for removable dentures -- Part 1:Materials for short-term use

TC 108 - VIBRA!II #I #OCURI MECANICE

ISO 2017-1:2005Mechanical vibration and shock -- Resilient mounting systems --Part 1: Technical information to be exchanged for the applicationof isolation systems

TC 110 - C"RUCIOARE DE MANIPULARE

ISO 21281:2005

Construction and layout of pedals of self-propelled sit-down rider-controlled industrial trucks -- Rules for the construction andlayout of pedals

TC 117 - VENTILATOARE INDUSTRIALE

ISO 6580:2005General-purpose industrial fans -- Circular flanges -- Dimensions

TC 118 - COMPRESOARE, SCULE #I MA#INI PNEUMATICE

ISO 20643:2005

Mechanical vibration -- Hand-held and hand-guided machinery --Principles for evaluation of vibration emission

TC 126 - TUTUN #I PRODUSE DIN TUTUN

ISO/TS 7821:2005Tobacco and tobacco products -- Preparation and constitution ofidentical samples from the same lot for collaborative studies forthe evaluation of test methods

TC 135 - EXAMIN"RI NEDISTRUCTIVE

ISO 9712:2005Non-destructive testing -- Qualification and certification ofpersonnel (available in English only)

TC 138 - !EVI, FITINGURI #I ROBINETE DE MATERIALEPLASTICE PENTRU TRANSPORTUL FLUIDELOR

ISO 16241:2005Notch tensile test to measure the resistance to slow crack growthof polyethylene materials for pipe and fitting products (PENT)

TC 146 - CALITATEA AERULUI

ISO 16740:2005Workplace air -- Determination of hexavalent chromium inairborne particulate matter -- Method by ion chromatography andspectrophotometric measurement using diphenyl carbazide

ISO 16362:2005Ambient air -- Determination of particle-phase polycyclic aromatic

hydrocarbons by high performance liquid chromatography(available in English only)

TC 147 - CALITATEA APEI

ISO 11732:2005Water quality -- Determination of ammonium nitrogen -- Methodby flow analysis (CFA and FIA) and spectrometric detection

ISO 16712:2005Water quality -- Determination of acute toxicity of marine orestuarine sediment to amphipods (available in English only)

TC 156 - COROZIUNEA METALELOR #I ALIAJELOR

ISO 7539-7:2005

Corrosion of metals and alloys -- Stress corrosion testing --Part 7: Method for slow strain rate testing

TC 158 - ANALIZA DE GAZE

ISO 6145-8:2005Gas analysis -- Preparation of calibration gas mixtures usingdynamic volumetric methods -- Part 8: Diffusion method(available in English only)

TC 159 - ERGONOMIE

ISO 14738:2002/Cor 2:2005

TC 165 - STRUCTURI DE LEMN

ISO 13910:2005Structural timber -- Characteristic values of strength-gradedtimber -- Sampling, full-size testing and evaluation (available inEnglish only)


25/28


25

TC 172 - OPTIC"#I FOTONIC"

ISO 12858-3:2005Optics and optical instruments -- Ancillary devices for geodeticinstruments -- Part 3: Tribrachs (available in English only)

ISO 11146-2:2005Lasers and laser-related equipment -- Test methods for laser

beam widths, divergence angles and beam propagation ratios --Part 2: General astigmatic beams

ISO/TR 11146-3:2004/Cor 1:2005(available in English only)

ISO 11810-1:2005Lasers and laser-related equipment -- Test method andclassification for the laser resistance of surgical drapes and/orpatient protective covers -- Part 1: Primary ignition andpenetration (available in English only)

TC 190 - CALITATEA SOLULUI

ISO 10390:2005Soil quality -- Determination of pH

ISO 17126:2005Soil quality -- Determination of the effects of pollutants on soilflora -- Screening test for emergence of lettuce seedlings(Lactuca sativa L.)

ISO 22030:2005Soil quality -- Biological methods -- Chronic toxicity in higherplants

TC 195 - MA#INI #I UTILAJE PENTRU CONSTRUC!II

ISO 18652:2005Building construction machinery and equipment -- Externalvibrators for concrete (available in English only)

TC 199 - SECURITATEA MA#INILOR

ISO 13856-2:2005Safety of machinery -- Pressure-sensitive protective devices --Part 2: General principles for the design and testing of pressure-sensitive edges and pressure-sensitive bars (available in Englishonly)

ISO 19353:2005Safety of machinery -- Fire prevention and protection

TC 211 - INFORMA!II GEOGRAFICE

ISO 19110:2005Geographic information -- Methodology for feature cataloguing

(available in English only)ISO 19119:2005Geographic information -- Services (available in English only)

TC 212 - LABORATOARE DE ANALIZE BIOLOGICEMEDICALE #I SISTEME DE DIAGNOSTICARE INVITRO

ISO/TR 22869:2005Medical laboratories -- Guidance on laboratory implementation ofISO 15189: 2003 (available in English only)

TC 213 - SPECIFICA!II #I VERIFIC"RI DIMENSIONALE #IGEOMETRICE ALE PRODUSELOR

ISO/TS 17450-1:2005Geometrical product specifications (GPS) -- General concepts --Part 1: Model for geometrical specification and verification

TC 220 - RECIPIENTE CRIOGENICE

ISO 23208:2005Cryogenic vessels -- Cleanliness for cryogenic service (availablein English only)

TC 221 - GEOSINTETICE

ISO 9862:2005Geosynthetics -- Sampling and preparation of test specimens(available in English only)

ISO 9863-1:2005Geosynthetics -- Determination of thickness at specifiedpressures -- Part 1: Single layers (available in English only)

ISO 9864:2005Geosynthetics -- Test method for the determination of mass perunit area of geotextiles and geotextile-related products (availablein English only)

ISO 12957-1:2005Geosynthetics -- Determination of friction characteristics --Part 1: Direct shear test (available in English only)

ISO 12957-2:2005Geosynthetics -- Determination of friction characteristics --Part 2: Inclined plane test (available in English only)

ISO 13428:2005Geosynthetics -- Determination of the protection efficiency of ageosynthetic against impact damage (available in English only)

TC 226 - MATERIALE PENTRU PRODUCEREAALUMINIULUI BRUT

ISO 12986-2:2005Carbonaceous materials used in the production of aluminium --Prebaked anodes and cathode blocks -- Part 2: Determination offlexural strength by the four-point method (available in English

only)


26/28


26

Centrul pentru Schimb de Informa#ii pentru Standarde

n prezenta rubric!sunt publicate notific!rile referitoare la standarde, adresate SecretariatuluiOMC sub inciden"a Acordului referitor la Barierele Tehnice n Calea Comer"ului (TBT).

Totodat!, rubrica r!spunde #i obliga"iilor referitoare la transparen"! men"ionate n art. 2 alAcordului TBT.

Notific!ri referitoare la standarde primite de la secretariatul OMCpn!la data de 28.02.2005

STATELE UNITE ALE AMERICII

USA/95 Standard for the flammability of mattresses and mattress/foundation sets; Standard toaddress open flame ignition of bedclothes

USA/96 Standard to address open flame ignition of bedclothes; advance notice of proposedrulemaking

REPUBLICA COREEA

KOR/85 Proposed amendments in technical criteria on measuring instruments (Type approvals offuel dispensers, LPG dispensers and oil meters)

KOR/86- Proposed amendments in technical criteria on measuring instruments (Type approvals ofgraduated tanks)

KOR/87- Proposed amendments in technical criteria on measuring instruments (Type approvals oftanks Lorries)

ISRAEL

ISR/76 Amendment to SI 1430 part 3 Roofing sheets: polymer modified bitumen sheetsreinforced with non-woven polyester or other fibers for use by welding Roofing andwater-proofing

ISR/77 SI 107 part 1 Gas-oil: Gas-oil for diesel enginesISR/78 SI 798 Ophthalmic optics Uncut finished spectacle lenses:

Part 1: Specifications for single-vision and multifocal lensesPart 2: Specifications for progressive power lenses


27/28


27

REPUBLICA POPULAR"CHINEZ"

CHN/68 Packaging Glass Containers Release of lead, cadmium, arsenic and antimony

Permissible limitsCHN/71 The specification for limit on harmful element content of the heavy metal concentrates

productsCHN/72 General standard for the labeling of pre packed alcoholic beverageCHN/73 Limit and measurement method of noise emitted by stationary motorcycles and mopedsCHN/74- Limit and measurement method of noise emitted by accelerating motorcycles and mopedsCHN/75 - Limit and measurement methods for crankcase pollutants from heavy-duty vehicles

equipped with P.I. enginesCHN/76- Limit and measurement methods for fuel evaporative pollutants from heavy-duty vehicles

equipped with P.I. engines

CHN/77 Food additive xylitolCHN/78 China national standard cigarettesPart 2: Cigarettes MarkPart 3: Cigarettes Technical requirements for packaging, making, storage and transportPart 4: Cigarettes Technical requirements for sense evaluationPart 5: Cigarettes Mainstream smokePart 6: Cigarettes Quality evaluation

CHN/79 Technical criterion for testing and assessment of the toxicity of chemicalsCHN/80 Limits and measurement methods for exhaust smoke from C.I.E.CHN/81 - Limits and measurement methods for exhaust pollutants from compression ignition and

gas fuelled positive ignition engines of vehicles (III, IV, V)CHN/82- Limits and measurement methods for exhaust pollutants from vehicles equipped ignition

engine under two-speed idle conditions and driving mode conditionsCHN/83 - Limits and measurement methods for exhaust smoke emissions from motorcycles and

mopedsCHN/84- Limits and measurement of the voice outside accelerating three-wheeled car or low-speed

truckCHN/85- Limits and measurement methods for exhaust pollutants from diesel engines of tri-wheeland low-speed goods vehicles

AUSTRALIA

AUS/38- Radio communications standard 2005 (406MHz satellite Distress Beacons)AUS/39 Radio communications standard 2005 (analogue speech (angle modulated) equipment)

JAPONIA

JPN/137 Quality labeling standard for soy milk, prepared soy milk and soy drinkJPN/138 The quality labeling standard for boiled and dried small fishes and powdered boiled and

dried small fishes


28/28


CHILE

CHL/46 Combustibles gaseous Household devices for instantaneous production of warm water

General requirements for manufacturing and safety, test methods and marking

Responsabil OMC / ASRO Diana Doroban"ue-mail: [email protected]; Tel/Fax: 212.99.74

Buletin martie_2005.pdf

Documents

Transcript of Buletin martie_2005.pdf