Be465ba187a714320761a8bfd47b1647 NIC M Impex Caiet de Sarcini

8/12/2019 Be465ba187a714320761a8bfd47b1647 NIC M Impex Caiet de Sarcini

1/21

0

Programul Operaional Sectorial Creterea Competitivitii Economice

-co-finanat prin Fondul European de Dezvoltare Regional

Investiii pentru viitorul dumneavoastr

Sectoral Operational Programme Increase of Economic Competitiveness co-financed by

European Regional Development Fund

investments for your future

Nr. 30 / 10.03.2014

ANUNT DE INTENTIEprivind realizarea achizitiei de echipamente in cadrul proiectului:

Dotarea firmei S.C. NIC & M IMPEX S.R.L. cu echipamente specializate, in vederea cresterii

competitivitatii, SMIS 43747

NOTICE OF INTENT

On equipment purchasing under the project:

To fit out S.C. Nic & M Impex S.R.L. with technical equipment in order to increase itscompetitiveness, SMIS 43747

Proiect cofinantat prin: Fondul European de Dezvoltare Regionala (FEDR) si Bugetul de Stat prin:

Programul Operaional Sectorial Creterea Competitivitii EconomiceProject Co-financed by: European Regional Development Found (ERDF) and State Budget by:

Sectoral Operational Programme Increase of Economic Competitiveness

Domeniul major de intervenie:DM1.1 - Investiii productive i pregtirea pentru competiia pepia a ntreprinderilor, n special a IMMKey area of intervention: DM1.1 - productive investment and putting in readiness for competition in

enterprise market, especially for the small business.

Operaiunea a) Sprijin pentru consolidarea i modernizarea sectorului productiv prin investiiitangibile i intangibileOperation a) support for consolidation and modernization of productive sector thru tangible and

intangible investments


2/21


3/21

2

I. INSTRUCTIUNI LA PROCEDURA DE ATRIBUIRE A CONTRACTELOR DE

FURNIZARE ECHIPAMENTE (BUNURI)

I .Procedure instructions for awarding goods supply contracts

1. Informatii generale / General in formation

A. Persoana juridica achizitoare / Legal person purchaser

Denumire /Name: S.C NIC & M IMPEX SRL

Adresa postala /Address: Cristian, str. VIII, nr 34A , jud. Sibiu

Localitate / Town: Cristian Cod postal/ Zip

Code: 557085

Tara /Country:

Romania

Persoana de contact / Contact person: Finica Elena Telefon /Phone: 0742072807

E-mail: [email protected] Fax: 0269579320

Modalitate de comunicare (solicitare informatii) / Communication means: fax, e-mail / fax, e-

mail

B. Sursa de finantare / F inancial resources

Surse proprii si fonduri structurale/ Private

and structural founds

Proiect finantat din fonduri structurale /

Project financed from structural founds:

Proiect / Project: Dotarea firmei S.C. Nic &

M Impex S.R.L cu echipamente specializate,

in vederea cresterii competitivitatii / To fit

out S.C. Nic & M Impex S.R.L with techni cal

equipment in order to increase its

competitiveness.

Program /Program:

Programul Operational Sectorial Cresterea

Competitivitatii Economice 2007 - 2013

Axa Prioritara 1 - un sistem inovativ siecoeficient de productie;

Main Axis 1 an innovative and eco

efficient production system

Domeniul de Interventie 1.1 - Investitii

productive si pregatirea pentru competitia pepiata a intreprinderilor, in special IMM;

Key Area of I ntervention 1.1: productive

investment and putting in readiness for

competition in enterprise market, especially

for the small business.

Operatiunea a)Sprijin pentru consolidarea si

modernizarea sectorului productiv prin

investitii tangibile si intangibile

Operation a) support for consolidation and

modernization of productive sector thrutangible and intangible investments.


4/21

3

C. INTRODUCERE / INTRODUCTION

In vederea realizarii activitatilor proiectului Dotarea firmei S.C. Nic & M Impex S.R.L. cuechipamente specializate, in vederea cresterii competitivitatii, in baza contractului de finantare,incheiat de S.C. NIC & M IMPEX S.R.L. cu Ministerul Economiei si Agentia de Dezvoltare

Regionala Centru, se organizeaza prezenta procedura de atribuire a contractelor de achizitie.

In order to realize the activities of the project "To fit out S.C. Nic & M Impex S.R.L with technicalequipment in order to increase its competitiveness.", according to the financing contract, concluded

between S.C.NIC & M IMPEXS.R.L., Ministry of Economy and Central Development Agency, it is

organized the present procedure for awarding a procurement contracts.

D. OBIECTUL CONTRACTELOR DE ACHIZITIE

Obiectul contractelor de achizitie il reprezinta furnizarea urmatoarelor echipamente, impartite pe

loturi astfel / Object of the acquisition contracts is the supply of the following equipments, divided

into batches as follows:

Echipament / Equipment Nr. Buc / pieces

Lotul 1/ Batch no 1:Centru vertical de frezare in 5 axe cu suprafata utila de

prindere minim 600 x 600 mm. / CNC vertical

machine for milling with 5 axis and bin feed of

minimum 600 x 600 mm

1

Lotul 2/ Batch no 2:

Strung CNC cu axa C/ CNC Turning mill with Caxe

1


Robot de sudura / Welding robot1

2. REGULI APLICABILE / APPLICABLE RULES:

2.1 Procedura de achiziie aplicat: Procedura simplificata prevazuta de Ordinul nr.

1120/15.10.2013privind aprobarea Procedurii simplificate aplicate de beneficiarii privai n cadrulproiectelor finanate din instrumente structurale, obiectivul Convergen, precum i n cadrulproiectelor finanate prin mecanismele financiare SEE i norvegian pentru atribuirea contractelor defurnizare, servicii sau lucrri.

2.1 Applied Purchasing Procedure: Simplified procedure specified by MFE Order 1120/15.10.2013

regarding the simplified procedure applied by private beneficiaries for projects financed fromstructural instruments, objective Convergence, as well as for projects financed from the SEE and

Norwegian Grants for granting supply, services, and works contracts.

Pe parcursul intregului proces de achizitii se vor respecta urmatoarele principii:

I. Economicitatea se va urmari minimizarea costului resurselor alocate pentru atingerearezultatelor estimate ale unei activitati, cu mentinerea calitatii corespunzatoare a acestor

rezultate.

II. Eficienta se va urmari asigurarea unui raport optim intre rezultatul obtinut (calitate) siresursele financiare alocate.

III.Eficacitatease va urmari indeplinirea obiectivelor specifice stabilite pentru fiecare activitatein sensul obtinerii rezultatelor asteptate.


5/21

4

IV.Transparentavor fi aduse la cunostiinta publicului toate informatiile referitoare la aplicareaprocedurii de atribuire.

V. Evitarea conflictului de interese se aplica art. 14 si 15 din OUG 66/2011 aprobata prinLegea 142/2012, coroborat cu art. 8 din anexa la HG 875/2011.

Throughout the contract award process the following principles will be followed:

I. Economythe minimization of the costs of the allocated resources in order to obtain theestimated results of an activity, while maintaining an adequate quality of those results.

II.Efficiency insuring the optimum ratio between achieved results (quality) and financialallocated resources.

III.Effectiveness achieving the specific objectives set for each activity with the scope ofobtaining the estimated results

IV.Transparencyall information regarding the contract award procedure will be broughtto the publics attention

V. Avoiding conflict of interest art. 14 and 15 of the OUG 66/2011 approved by Law142/2012, corroborated with art. 8 of the annex to HG 875/2011 apply.

2.2 Valoarea estimatavaloarea estimata a loturilor este urmatoarea:2.2 The estimated value - the estimated value of the batches is as it fallows:

Echipament / Equipment Nr. Buc / pieces Pret estimat (lei) /

Estimated Price

(RON)


Centru vertical de frezare in 5 axe cu suprafata

utila de prindere minim 600 x 600 mm. / CNC

vertical machine for milling with 5 axis and bin

feed of minimum 600 x 600 mm

1 712.931,8 lei


Strung CNC cu axa C/ CNC Turning mill withC axe

1 546.242,4 lei


Robot de sudura / Welding robot1 458.753,3 lei

2.3 Divizare pe loturi / Batch spli ttingPot fi depuse oferte pentru / Offers may be presented for:

I. un singur lot /single batchII. unul sau mai multe loturi / one or more batchesIII.toate loturile / all batches

Firmele care oferteaza mai multe loturi, vor trebui sa prezinte cate un set al documentelor de

calificare pentru fiecare lot ofertat. Fiecare set al documentelor de calificare, asa cum este prezentat

mai jos, va cuprinde urmatoarele documente:

- Certificatul constatator (sau document similar pentru ofertanii strini) original sau copielegalizata

- Copia certificatului de inregistrare(sau document similar pentru ofertantii strain),


6/21

5

- Declaratia privind conflictul de interese (F1)original- Declaratia privind gradul de inovare al echipamentelor - originalThe suppliers who offer more batches will have to submit one set of qualification documents for

every offered batch. Each set of qualification documents, as described below, will include the

following documents:

- The confirmation of company details (or similar document for foreign bidders) - original or

certified copy- Copy of registration certificate (or similar document for foreign bidders)

- Declaration of Conflict of Interest (F1) - Original

- Declaration on the degree of innovation of equipment - original

Documentele emise de autoriti publice strine (certificate constatator/ document similar; copiacertificatului de inregistrare// document similar pentru ofertantii straini) trebuie s fie traduse de ctreun traductor autorizat a crui semntur trebuie autentificat de un Notar Public.

Documents issued by foreign public authorities (The confirmation of company details/ similar

document for foreign bidders, Copy of registration certificate / similar document for foreignbidders) must be translated by a certified translator whose signature must be authenticated by a

Notary Public.

Se va semna cate un contract de furnizare pentru fiecare lot de echipamente. / It will be signed a

different supply contract for each batch of equipments.

3. CRITERII DE CALIFICAREdocumente solicitate

3. Criteria for Qualifi cationrequi red documents

3.1 Ofertantii vor demonstra ca au domeniul de activitate principal sau secundar inscris in

documentele constitutive care raspunde cererii de oferte, si anume producia i/sau comertulmasinilor conform unuia si / sau mai multora dintre urmatoarele coduri CAEN :

3.1 Offerer will prove that their main or secondary activity domain registered in constitutive

documents is fit for offer request namely production and / or trading of equipment according to one

or more of the following NACE codes:

2790 Fabricarea altor echipamente electrice / other electri cal equipment manufactur ing

si/sau

and / or

2841 Fabricarea utilajelor si a masinilor - unelte pentru prelucrarea metalului / equipment or

tool machines for metal processing

si/sau

and / or

4662 Comert cu ridicata al masinilor-unelte / Wholesale of tool machines

si / sau

and / or

4669 Comert cu ridicata al altor masini si echipamente / Wholesale of other machines and

equipment


7/21

6

sau echivalent pentru ofertantii straini. Se va anexa, n acest sens, Certificat constatator emis deOficiul National al Registrului Comertului sau document echivalent pentru ofertantii straini, cu o

vechime de maxim 30 de zile la data depunerii ofertelororiginal sau copie legalizata.or equivalent for the foreign offerer. In this sense, it will be subjoined the confirmation of company

details issued by The National Trade Register Office or equivalent document for the foreign offerer,

with an oldness of maximum 30 days fr om the date of submission of of fers in original or a

certified copy.

3.2 Se va anexa copie dupa certificatul de inregistrare (sau document similar pentru ofertantii

straini).

It will be subjoined a copy of the Certificate of Incorporation / Registration certificate (or a similar

document for the foreign offerer)

3.3Ofertanii trebuie s demonstreze c nu se ncadreaz n situaia conflictului de interese descris deOUG 66/2011, art. 14 i 15. n acest sens Oferta va contine i o Declaraie de tipul celei dinFormularul F1 de mai jos. Membrii Comisiei de Evaluare a Ofertelor ce vor fi naintate Achizitoruluisunt:

The offerers must demonstrate that they are not in the position of conflict of interest described byOUG 66/2011, articles 14 and 15. In this sense, the offer will contain a statement simillar with that

from the form number one, presented below. The members of the Evaluation Committee of the offers

that will be presented to the acquirer are:

Nr. crt. /

No.

Nume, Prenume / Name,

F ir st Name

Functia /

Position

Calitatea in cadrul

Comisiei de evaluare /

Positi on in the

Evaluation Committee

1 Marginean Nicolae Presedinte al comisiei deevaluare / President of


2 Pop Toader Membru in comisia de

evaluare / Member in


3 Finica Elena Membru in comisia de

evaluare / Member in


3.4 Ofertanii vor prezenta o declaraie pe proprie rspundere cu privire la gradul de inovare alechipamentelor ofertate, specificnd dac acestea sunt de ultima generatie (aparute in ultimii 3 ani)si /sau sunt certificate conform standardelor de calitate internationale specifice cu o vechime de

maximum 3 ani. Neprezentarea acestei declaraii este motiv de excludere de la procedura de achiziii.3.4 Offerer will provide a statutory declaration regarding offered equipments innovation degree,

specifying if these are state of the art (released in the last 3 years) and / or are certified according to

international quality standards with a release of maximum 3 years. Failure of providing this

declaration will result in exclusion from the purchase procedure.

Certificatul constatator (sau document similar pentru ofertanii strini), Copia certificatului deinregistrare(sau document similar pentru ofertantii strain), Declaratia privind conflictul de interese

(F1)si Declaratia privind gradul de inovare al echipamentelorreprezint documente de calificare.Neprezentarea unuia din aceste documente determin exluderea ofertantului de la procedur.


8/21

7

The confirmation of company details (or similar document for foreign offerer), copy of the

Certificate of Incorporation / Registration certificate (or similar document for foreign offerer),

Conflict of Interest Statement (F1), Statement of innovation degree of equipment represent

qualification documents. Failure of providing one of these documents will resul t in the exclusion

of the offerer fr om the procedure.

4. MODUL DE PREZENTARE / INTOCMIRE A OFERTELOR / Method of presentation /

Offer preparation

4.1 Oferta se va prezenta n limba romn. Ofertele elaborate in alte limbi vor fi insotite detraducerere autorizata. Orice document prezentatsi care este realizat intr-o limba strainavafi insotit obligatoriu de o traducerea (in limba romana) realizata de un traducator autorizat.

Documentele emise de autoriti publice strine trebuie s fie traduse de ctre un traductorautorizat a crui semntur trebuie autentificat de un Notar Public.

4.1 The offer will be presented in Romanian. Offers made in other languages will be

accompanied by a certfied translation. Any document presentedand is in a foreign language

will be accompanied by a legal translation (in Romanian) made by an certified translator.Documents issued by foreign public authorities must be translated by a certified translator

whose signature must be authenticated by a Notary Public.

4.2 Ofertele vor fi nregistrate, semnate i tampilate de ofertant pe fiecare pagina (de catrereprezentantul imputernicit al ofertantului).

4.2 Offers will be registered, signed, and stamped by the offerer on every page (by offerer

appointee)

4.3 Propunerea tehnica va fi prezentata astfel incat sa se asigure posibilitatea verificarii

conformitatii propunerii tehnice cu specificatiile tehnice prevazute in caietul de sarcini.

4.3 Technical proposal will be presented with the possibility to check on the compliance of

technical proposal with technical specification specified in Tender Book.

4.4Ofertele ce prezinta o perioada de garantie mai mica decat cea minim solicitata (12 luni )

vor fi respinse (a se vedea punctul 5.2 din prezenta documentatie).

4.4 Offers with a warranty period lower than the minimum admitted (12months) will be

dismissed. (see section 5.2 of the present document)

4.5 Pretul va fi exprimat in lei sau euro, fara TVA, si va ramane ferm pe toata perioada de

valabilitate a ofertei si de executie a contractului. Preturile se vor exprima pe fiecare

echipament (lot) ofertat. Pentru echivalarea ofertelor se va utiliza cursul BNR publicatin 10.03.2014, respectiv 1 euro =4.4996 lei.

4.5 Price will be set in RON or Euro, without VAT and it will remain unchanged on the entire

period of the offer and execution of the contract. Price will be presented on every equipment

(batch) offered. For validation of offers it will be used BNR exchange rate released on 10.03.2014,

respectively 1 euro = 4.4996RON.

4.6 Propunerea financiar va fi elaborat astfel nct aceasta s furnizeze informaii cu privirela pre, modalitate si termenii de plat, garanie, precum i la alte condiii financiare icomerciale legate de obiectul contractului de furnizare bunuri (propuse de ofertant).

Propunerea financiar are caracter ferm i obligatoriu, din punctul de vedere al coninutului pe

toat perioada de valabilitate a ofertei.4.6 Financial proposal will be elaborated to confer information regarding price, payment

method, warranty, as well as financial and economic conditions regarding the supplyment of


9/21

8

goods contract. Financial proposal has a firm and mandatory characteristic in terms of

content on the entire valability period of the offer.

4.7 Pretul pe echipament ofertat va cuprinde valoarea tuturor componentelor si accesoriilor

echipamentului necesare pentru a indeplini specificatia tehnica solicitata.

Furnizorul va asigura, de asemenea instalarea si punerea in functiune a echipamentului la

locatia cumparatorului fara costuri suplimentare pentru cumparator. Acest aspect se va

mentiona distinct in cadrul ofertei.

Pretul ofertat nu include transport, taxe, costul altor servicii aditionale, aspect care se va

mentiona clar in cadrul ofertei.

4.7 The offered price per equipment will include the value of all equipment components and

accessories necessary to realize the required technical specification.

Supplier shall ensure installation and commissioning of the equipment at the beneficiarys site

with no additional cost on beneficiarys charge. This issue will be specifically mentioned in the

offer.

The offered price does not include transportation, taxes, other additional services costs, issuewhich will be specifically mentioned in the offer.

4.8Oferta trebuie sa fie valabila minim 60 de zile

4.8Offer must be available for minimum 60 days.

4.9 Ofertele vor fi transmise pe suport de hartie intr-un exemplar original, in plic inchis prin

posta, curierat sau depuse personal la sediul social din Sat Cristian, Comuna Cristian, Str. VIII,

nr. 34A, Judetul Sibiu, Romania. Pe plic se va inscrie (pe langa datele expeditorului si

destinatarului) Oferta pentru achizitia de echipamente, A NU SE DESCHIDE INAINTE DEDATA DE 19.03.2014 ORA 14,00.

4.9 Offers will be sent on paper in an original specimen, in a closed envelope by mail, courieror personaly submitted to head office in Cristian village, Cristian commune, Street VIII, no.

34A, Sibiu county, Romania. On the evelope will be written (except the sender and recipients

details) Offer for purchase of equipments, NOT TO BE OPENED BEFORE 19.03.2014,

14,00 oclock.

4.10Termenul de depunere a ofertelor este data de 19.03.2014 ora 12,00.

4.10 Submission period is 19.03.2014, 12,00 oclock.

Orice oferta primita dupa termenul limita de depunere a ofertelor stabilit in prezenta

documentatie sau depusa la o alta adresa decat cea indicata mai sus nu va fi evaluata de

achizitor.

Any offer received after the submission period set by the present document or submitted to

another address other than the one indicated above, will not be evaluated by the acquirer.

4.11 Informatii si clarificari se pot solicita in scris pana la data de 14.03.2014, ora.12,00.

Solicitarea de clarificari se va transmite in forma scrisa prin fax, e-mail sau posta/curier la

sediul social din Sat Cristian, Comuna Cristian, Str. VIII, nr. 34A, Judetul Sibiu, Romania.

4.11 Informations may be requested in writing until 14.03.2014, 12,00 oclock. The request

will be sent by fax, e-mail or mail/courier to head office in Cristian village, Cristian commune,

Street VIII, no. 34A, Sibiu County, Romania.


10/21

9

4.12 Deschiderea ofertelor va avea loc la sediul social al firmei, la data de 19.03.2014, ora

14,00. Participarea eventualilor delegati ai Ofertantilor este posibila doar in baza prezentarii

unei mputerniciri din partea Ofertantului conform Formular 2.4.12 The offers opening will take place at head office on 19.03.2014, 14,00 oclock.

Participating of prospective delegates is possible only under the presentation of empowerment

from the offerer according to form no. 2.

Fiecare Ofertant va fi notificat in scris cu privire la rezultatul achizitiei (evalurii ofertelor).Every offerer will be notified in writing regarding the purchase result (offers evaluation)

5. INFORMATII CU PRIVIRE LA CONTRACT/ I NFORMATIONS REGARDING THE

CONTRACT

5.1 Durata contractuluieste de 7 luni de la data semnarii.

5.1Contract period is 7 months from the date of signing.

5.2Perioada de garantie acordata echipamentelor va fi de minimum 12 luni pentru parti mecanice si

comanda numerica /Minimum 12 months for mechanical parts and CNC5.2Ofertele ce prezinta o perioada de garantie mai mica decat cea minim solicitata vor fi respinse.

Offers that have a a warranty period lower than the minimum admitted will be dismissed.

5.3 Semnarea contractului va avea loc in termen de 20 de zile calendaristice de la data primirii

instiintarii.

5.3Signing will take place in 20 calendar days from the date of receiving the notification.

5.4 Termen de livrare /Delivery period

a. Lot nr. 1 - Centru de frezat - va fi primul utilaj achizitionat. Perioda de livrare, pana la sfarsitul

lunii mai. /Batch 1 - CNC Vertical machine for milling - will be the first machine purchased. The

delivery term will be until the end of May.

b. Lot nr. 2 - Strungul CNC - va fi cel de-al doilea utilaj achizitionat. Perioada de livrare, pana la

sfarsitul lunii iulie. / Batch 2 CNC Lathe machine - will be the second machine purchased. The

delivery term will be until the end of July.

c. Lot nr. 3 - Robot de sudura - va fi cel de-al treilea utilaj achizitionat. Perioada de livrare, pana la

sfarsitul lunii septembrie. / Batch 3 Welding robot - will be the third machine purchased. The

delivery term will be until the end of September.

5.5 Receptia produselor /Acceptance of productsReceptia preliminara calitativa a produsului se va face prin executarea unei piese test pentru

dovedirea specificatiilor tehnice ofertate.

Receptia finala a produsului se face la sediul beneficiarului si se incheie odata cu instalarea si

punerea in functiune a utilajului si livrarea documentelor insotitoare:

- factura

- aviz de insotire (lista coletaj)

- certificat de garantie

- declaratie de conformitate CE

- manuale de operare, programare si intretinere

Preliminary qualitative reception of product will be done by executing a test part in order to prove

the offered technical specifications.


11/21


12/21

11

II. CAIET DE SARCINI (SPECIFICATII TEHNICE) / II. TENDER BOOK (TECHNICAL

SPECIFICATION)

Prezentul caiet de sarcini face parte integranta din documentatia de atribuire si constituie ansamblul

criteriilor pe baza carora se elaboreaza oferta de catre fiecare operator economic ofertant in cadrul

prezentei proceduri de atribuire.

These technical specifications are part of the tender documentation and represent all the criteria on

which the bid is prepared by each economic operator who will participate under this tender

procedure.

Nr.

crt.

DENUMIREA PRODUSULUI / PRODUCT NAME U.M Cant. /

Qty.

Lot1 Centru vertical de frezare in 5 axe cu suprafata utila de

prindere minim 600 x 600 mm. / CNC vertical machine for

milling with 5 axis and bin feed of minimum 600 x 600 mm

Buc /

Pcs.

1

Lot 2 Strung CNC cu axa C/ CNC Turning mill with C axe Buc. /Pcs.

1

Lot 3 Robot de sudura / Welding robot Buc. /

Pcs.

1

Specificatiile tehnice sunt determinate pe baza necesitatilor S.C NIC & M IMPEX S.R.L. si in

concordanta cu datele tehnico-economice din proiectul co-finantat prin POS CCE.

Technical specifications are determined based on the needs of S.C NIC & M IMPEX S.R.L. and inaccordance with the technical and economic data from the project co-financed by POS CCE.

Lot 1Centru de frezat in 5 axe / CNC Vertical milling center in 5 axis- 1 buc / pcs.

Nr.

Crt.

Caractertistica / Characteristics Valoarea impusa

/ required value

Caracter istici tehnice si functionale / Techni cal and functional character istics

Caracter istici de versatil i tate si productivi tate / Versati li ty and productivity character istics

Dimensiuni ale maselor si capacitate de incarcare care sa asigure prelucrare de repere la

dimensiuni si gabarite diverse; prelucrare in 5 axe/ Sizes of tables and loading capacity toensure machining of parts at different sizes and weights; Machining on 5 axis

1 Cursa axa X / X axis travel Min. 650 mm

2 Cursa axa Y / Y axis travel Min. 550 mm

3 Cursa axa Z / Z axis travel Min. 500 mm

4 Inclinatia axei B / Tilting range (degree) +/- 100 grade

5 Rotatia axului C /Rotating range C - axis 0 - 360 grade

6 Distanta minima arbore masa / Minimum distance spindle nose -

table

150 mm


13/21

12

7 Dimensiune masa / table size Min. 600 x 600

mm

8 Incarcatura maxima / maximum load Min. 250 kg.

9 Avans rapid axa X / X axis rapid traverse Min. 30 m/min

10 Avans rapid axa Y /Y axis rapid traverse Min. 30 m/min

11 Avans rapid axa Z / Z axis rapid traverse Min. 30 m/min

12 Vinteza arbore / Spindel speed 10 000 r/m

13 Viteza de rotatie axa B / rotation speed for B axis 25 rpm

14 Precizia de pozitionare axa B (inclinare cu encoder pe motor) /

Position accuracy B axis (tiltingwith motor encoder)

Min. +/- 20 sec.

15 Viteza de rotatie axa C / rotation speed for C axis 25 rpm

16 Precizia de pozitionare axa C (inclinare cu encoder pe motor) /Position accuracy C axis (tiltingwith motor encoder)

Min. +/- 10 sec.

17 Magazie automata de scule cu brat /Automatic tool magazine with

changing armnumber of tool stations

Min. 30

18 Timp schimbare scula / Tool changing time 1,6 sec.

19 Puterea arborelui / Spindle power 11 kw

20 Tip coada port scula / Tool shank type ISO 40

21 Diametrul maxim al sculei /Max. tool diameter 125 mm

22 Lungimea maxima a sculei / Tool maximum length Min. 250 mm

23 Greutatea maxima a sculei /Maximum tool weight Min. 8 kg.

24 Forta avans axa X / Y / Z /Feed force X / Y / Z axis 5000 N

25 Inaltime totatala / Total height Max. 3000 mm

26 Diametru rulment ax principal (interior / exterior) / Spindle

bearing diameter (inside / outside )

Min. 65 mm /

100 mm

27 Diametru surub cu bile / Ball screw diameter Min. 40 mm

28 Ghidaje lineare axa X dimensiuni / tip / Linear guide way X axisdimension / type

Min. 45 mm / Cu

role /Min. 45

mm / Roller

29 Gidaje lineare axa Y/Z dimensiuni/tip / Linear guide way Y/Z-axis - dimension/type

Min. 35 mm/ Cu

role /Min. 35

mm/ Roller

30 Tip control CNC/ CNC Control type Siemens 840 D

Solution Lineincl. Shop Mill


14/21

13

31 Transfer date necesar/ Required Data transfer Ethernet and

USB interface

32 Presiune pompa lichid racire/ Coolant pressure pump Min. 20 bar

33 Capacitate minima rezervor lichid racire/ Min. Tank capacity 250 l

34 Furnizare lichid racire necesar/ Required Coolant supply Prin ax /Through

spindle

35 Iluminare zona de lucru/ Work area lightning LED

36 Optiune reglare/ Adjustment option Manivela

electronica

/Electronic

Handwheel

Lot 2Strung CNC cu axa C / CNC Turning mill with C axe- 1 buc / pcs.

Nr. Crt. Caractertistica / Characteristics Valoarea impusa /

required value

Caracteristici tehnice si functionale / Technical and functional characteristics

Caracteristici de versatilitate si productivitate / Versatility and productivity characteristics

Dimensiuni ale meselor si capacitate de incarcare care sa asigure prelucrarea de repere la

dimensiuni si gabarite diverse; prelucrare in 3 axe comandate numeric si posibilitate de frezare /

Sizes of tables and loading capacity to ensure machining of parts at different sizes and weights;

Machining on 3 axis with numeric command and milling capability.

Capacitate de prelucrare / Capacity

1. Universal /Chuck size 8"2. Diametrul piesei de prelucrat / max diameter Min. 660 mm3. Diametrul de prelucrare / machining diameter Min. 360 mm4. Diam. prelucrare bara/ bar work capacity Min. 65 mm5. Lungimea piesei de prelucrat / machining lenght Min. 1050 mm

Arborele principal / Spindel

6. Gama de turatii / Spindel speed Min.35-5000 rpm

7. Alezajul arborelui principal / Spindel bore Min. 76 mm

8. Incrementul minim de indexare pentru axa C / minimum

indexing increment for C axis

0, 0001 grade

9. Puterea motorului pentru regim de 30 min / cont / Max.

spindel power (30 min / cont. rating)

Kw 18,5 / 15

10. Cuplul maxim la arborele principal / max. torque Min. 358 N/m

Turela / Turret

11. Numarul de scule in turela / number of tools Min. 12 buc. / pcs.

12. Timp de indexare cu o pozitie / turret indexing time Max 0,30 sec.


15/21

14

13. Turatia maxima a sculei rotative / rotary tool spindle 4500 rpm

Curse / Travel

14. Cursa pe axa X /X axis travel 225 mm

15. Cursa pe axa Z /Z axis travel 1100 mm

16. Viteza de avans pe axele X / Z /feed rate for X / Z axis Min. 0 - 8000mm/min

17. Viteza de avans axa C /feed rate for C axis Min. 1 - 2000

grade / min

Echipament general / General equipment

18. Papusa mobila comandata numeric /Numerical command footstock

19. Palpator de scule automat /Auto. parts catcher

20. Set de portscule standard / Standard tool - holder set

Siguranta/ Safety

21. Sistem absolut de pozitionare /Absolute positioning system

Optiuni pentru automatizare / Automatization options

22. Evacuator automat de piese finite /Auto. parts exit conveyer

23. Interfata pentru alimentator cu semifabricat bara (cu magazie de bare) /

Barfeeder interface kit

Evacuarea spanului / Chip disposal

24. Evacuator de span cu evacuare laterala / Chip conveyor side disposal

b. Lot 3Robot de sudura / Welding robot -1 buc / pcs.Nr.Crt.

Caractertistica / Characteristics Valoarea impusa /

required value

Caracteristici tehnice si functionale / Technical and functional characteristics

Caracteristici de versatilitate si productivitate / Versatility and productivity characteristics

Dimensiuni ale meselor si capacitate de incarcare care sa asigure prelucrarea de repere la

dimensiuni si gabarite diverse. Numarul de mese de lucru: 2 / Sizes of tables and loading

capacity to ensure welding of parts at different sizes and weights; number of tables: 2

Manipulator / Robot

1 Incarcarea maxima utila /Maximum load Min. 8 kg.

2 Numarul axelor /Number of axis Min. 6 axe simultan

3 Motorul /Motor AC Servomotor

4 Frane /Brake Pe toate axele / On

all axis


16/21

15

5 Sistemul de pozitionare /Positioning system Electronic resolver

6 Precizia repozitionarii /Repeatability +/- 0,1 mm max.

7 Viteza maxima /Maximum speed 180 m/min

8 Zona maxima de lucru /Maximum working zone Min. 1550 mm

Sursa de sudare / Welding source

1 Puls MIG/MAG

2 Racire / Cooling system Apa / water

3 Tensiunea de intrare /Input Voltage 400 v/50Hz

4 Puterea de intrare /Power input Max. 28 kVA

5 Durata activa / Duty Cycle 500 A/100%

6 Marja curentilor de iesire / Output current adjustable range 40-500 A

7 Metode de sudare / Welding method MAG/MIG, Puls

MIG/MAG

8 Tipuri de sarma /Applicable welding wire Sarma normala /

sarma otel inox

Steel welding wire /

Stainless welding

wire

9 Posibilitatea materialului de sudat /possible welding material Aluminiu, Otel,

Chrome, Nickel /Aluminum, Steel,

stainless steel

10 Programarea parametrilor / Programming method of welding

parameter

Prin interfata

digitala si ecran

tactil /By touch

pendant of robot

controller via

digital interface

Masa Nr. 1 / Table Nr. 1

11 Doua axe automatizate / 2computer controlled axis

12 Greutatea piesei de sudat / Weight of the work piece Max. 500 kg

13 Domeniul de functionare a inclinarii / Operating range tilting -135 to + 135

14 Viteza de inclinare / Titling speed 90/ Sec (15 rpm)

15 Raza de rotatie / Operating range rotating -360 to +360

16 Viteza de rotatie la 165 /Rotation speed 165/Sec (27 rpm)

17 Precizia de pozitionare /Repeatability +/- 0,05 mm


17/21

16

Masa Nr. 2 / Table Nr. 2

18 O axa automatizata / 1 computer controlled axis

19 Greutatea piesei de sudat / Weight of the work piece Max 500 kg.

20 Domeniul de functionare a rotatiei / Operating range rotating -360 to +360

21 Precizia de pozitionare /Repeatability +/- 0,05 mm

Controller

22 Procesor / CPU 64 bits CPU

23 Controlul axelor /Multiple Axis Control Min. 27 de axe

24 Sincronizarea robotilor /Robot synchronization Min. 3 roboti

25 Puncte de memorie / Storage memory Min, 40 000

26 Memorie externa /External memory SD card, 2 USB

27 Ethernet

28 Afisarea parametrilor /Display of welding parameter Panou de comanda

mobil cu ecran

tactil /At touch

pendant of robot

controller

29 Ajustarea parametrilor in timpul procesului / Adjustment of

welding parameter during welding

Prin atingerea

ecranului tacticl /

By touch pendant ofrobot controller

Toate cerinele impuse aa cum apar mai sus - vor fi considerate ca fiind minimale. n acest sensorice ofert prezentat, care se abate de la prevederile Caietului de sarcini, va fi luata n considerare,dar numai n msura n care propunerea tehnic presupune asigurarea unui nivel calitativ superiorcerinelor minimale din Caietul de sarcini. Ofertarea de echipamente cu caracteristici tehniceinferioare celor prevzute n caietul de sarcini atrage descalificarea ofertantului.

Toate echipamentele trebuie s fie noi

Nu se admit oferte alternative.

All the imposed requirementsas presented above will be considered minimal. In this sense anypresented offer which is diverted from the tender book stipulations will be taken into consideration

but only in the case in which the technical proposal implies the insurance of a qualitative superior

level as the minimal requirements from the tender book. The offering of equipment with lower

technical characteristics than those stipulated in the tender book shall disqualify the offerer.

Al l equipment must be new.

Al ternative offers are not allowed.


18/21

17

III. FORMULARE

Formularul F1

(Denumirea companiei)

DECLARAIE PRIVIND CONFLICTUL DE INTERESE

Subscrisa ........................................, cu sediul n ....... ......................................., str. ......................,reprezentant legal prin ....................... ......................., n calitate de ofertant la procedura de achiziie

bunuri a S.C. NIC & M IMPEX S.R.L., declar pe propria rspundere c societatea nu se afl nconflict de interese, aa cum este acesta definit la art. 14 din Ordonana de Urgen a Guvernului

Romniei nr. 66/2011 privind prevenirea, constatarea i sancionarea neregulilor aprute n

obinerea i utilizarea fondurilor europene i/sau a fondurilor publice naionale aferente acestora, i

anume:

- nu exist legturi ntre structurile acionariatului subscrisei i acionariatului Achizitorului;

- nu exist legturi ntre subscrisa i membrii comisiei de evaluare nominalizai n documentaia deatribuire;

- nu dein pachetul majoritar de aciuni n dou firme participante pentru acelai tip de achiziieorganizat de Achizitor.

Am luat cunotin de obligaia pe care o am de a notifica n scris Achizitorul de ndat ce apare osituaie de conflict de interese pe perioada derulrii procedurii de achiziie i de a lua msuri pentrunlturarea situaiei respective, n conformitate cu art. 14 si 15 alin. (2)din O.U.G. nr. 66/2011.Informaiile furnizate sunt complete i corecte n fiecare detaliu i neleg c Achizitorul are dreptulde a solicita, n scopul verificrii i confirmrii declaraiilor, orice documente doveditoare de caredispun.

nteleg, de asemenea, c n cazul n care aceast declaraie nu este conform cu realitatea sunt pasibilde nclcarea prevederilor legislaiei penale, iar oferta va fi respins.

Data completrii: .Operator economic: .........................................................................................

(semntur autorizat i stampila)


19/21

18

Form 1

(Companys name)

Declaration regarding conflict interests

The undersigned .. , with registered office in.., street , legally represented by ............... ., as offerer forthe goods purchasing procedure by S.C. NIC & M IMPEX S.R.L., I (hereby) declare on my own liability

that the company is not the object of conflict interests such as it is mentioned in the article 14 of

Romanian Government Emergency Ordinance 66/2011 regarding the prevention, finding and sanction of

irregularities occurred in the collection and use of European funds and / or national public funds related

to them such as:

- There are no links between the structures of the undersigned shareholder and the Acquirershareholder;

- There are no links between the undersigned and the evaluation committee nominated in the tenderdocumentation;

- I do not hold the major shareholding in two companies participating for the same purchaseorganized by the Acquirer;

I take note of the responsibility of notifying in written form the Acquirer as soon as a situation of conflict

interests emerges during the process of purchasing and to take action for the extrusion of that situation in

conformity with article 14 and 15, paragraph (2) of O.U.G 66/2011.

The information provided is comprehensive and correct in every detail and I understand that Acquirer

reserves its right to demand, for verification and confirmation, any proving documents that I have.

I also understand that if this statement does not comply with the reality, I am impeachable for violation of

criminal law regarding false statements of Criminal Code, and the offer will be rejected.

Date of completion: ..Business operator: .

.(Firm signature and stamp)


20/21

19

Formularul F2

OPERATOR ECONOMIC Nr. . Data _____________________

(denumirea/numele)

IMPUTERNICIRE PENTRU REPREZENTAREA OFERTANTULUI

LA SEDINTA DE DESCHIDERE

Subsemnatul ./numele), posesor al actului de identitate (tipul actului) seria..nr, emis de .(emitent) la data de , cod numeric

personal , In calitate de (functia), reprezentant legal al (denumirea / numele Ofertantului), Imputernicesc persoanele de mai jos sa reprezinteOfertantul . .(denumirea/numele Ofertantului) la sedinta de deschidere din cadrul proceduriide atribuire a contractului de furnizare de bunuri (echipamente) din data de 19.03.2014 ora 14,00 in

cadrul proiectului POS CCE cu Titlul:Dotarea firmei S.C. NIC & M IMPEX S.R.L. cu echipamente

specializate, in vederea cresterii competitivitatii, SMIS 43747:

1. Domnul/Doamna (numele), act de identitate (tipul actului) seria..nr, emis de .(emitent) la data de , cod numeric

personal ;

2. (se trec toate persoanele Imputernicite sa reprezinte Ofertantul la sedinta dedeschidere)

Data completrii: (ziua/luna/anul)Operator economic,

_______________________

(numele si prenumele in clar)

(semnatur autorizat si stampila)


21/21

20

Form F2

Business Operator No. . Date _____________________

(name/first name)

POWER OF ATTORNEY REGARDING THE REPRESENTATION OF THE OFFEROR AT

THE OPENING MEETING

The undersigned .. owner of the ID card.., series,number., issued by, at the date of., personalidentification number, as, legalrepresentative of.., I, hereby, authorize the following persons torepresent the offeror.at the opening meeting during the procedure of ascription ofthe contract for the supply of goods (equipment) from the date 19.03.2014,at 2 PM in the projectPOS CCE with the title To fit out S.C. Nic & M Impex S.R.L. with technical equipment inorder to increase its competitiveness SMIS 43747:1.Mr. / Mrs..., owner of the ID card..,series, number., issued by, at the date of.,

personal identification number2... (are mentioned all the persons authorized to represent the offererat the opening meeting)

Date:

Business operator:

_______________________

(Name and first name)

(Signature and stamp)

Be465ba187a714320761a8bfd47b1647 NIC M Impex Caiet de Sarcini

Documents

Transcript of Be465ba187a714320761a8bfd47b1647 NIC M Impex Caiet de Sarcini