Apa Nova Caiet de Sarcini Reactivi

CAIET DE SARCINI PENTRU ACHIZITIA DE REACTIVI UTILIZATI PENTRU ANALIZELE CHIMICE

ALE APEI POTABILE SI APELOR UZATE

1. INTRODUCERE

Apa Nova Bucuresti (ANB) este o filiala a grupului VEOLIA APA care are ca obiect principal

de activitate gestiunea resurselor de apa, transportul si distributia catre populatie. Incepand cu anul 2000, Apa Nova Bucuresti a devenit operatorul serviciilor publice de alimentare cu apa si de canalizare in Muncipiul Bucuresti in baza contractului de concesiune incheiat cu Municipiul Bucuresti. 2. OBIECTUL CAIETULUI DE SARCINI

Prezentul Caiet de Sarcini contine principalele cerinte tehnice privind achizitia de Reactivi

chimici (Produse) necesari pentru laboratoarele de proces care efectueaza analizele chimice la apa potabila si apele uzate din cadrul ANB, si anume Laborator Analize Apa Uzata Sud, Laborator apa potabila, Laborator Calitate Glina si Laboratoare Directia Productie (Laborator Rosu, Arcuda si Crivina) 3. MEMORIU TEHNIC DE PREZENTARE

In calitatea sa de operator al serviciilor de alimentare cu apa si canalizare, prin laboratoarele de proces existente, ANB are obligatia legala de a efectua controlul calitatii apei (potabile si uzate) in conformitate cu legislatia in vigoare Alaturi de compusii existenti in mod normal sau adaugati in mod voit in apa, acesta poate sa contina, in concentratii variabile substante prezente in mod accidental-poluanti. Analiza chimica a apei cuprinde determinarea tuturor acestor componente din apa. De o prima importanta in analiza chimica a apei sunt determinarile indicatorilor de poluare: metale grele, substante organice, amoniac (amoniu), nitriti, nitrati, cloruri, fosfati etc. 4. SPECIFICATII TEHNICE ALE PRODUSULUI

Reactivii chimici solicitati prin prezentul caiet de sarcini sunt impartiti in 6 loturi conform

anexei 1. Caracteristicile lor tehnice si cantitatile sunt prezentate in anexa 1.

5. STANDARDE, NORME Furnizorul va prezenta urmatoarele documente:

Fisa cu date de securitate a produsului in conformitate cu prevederile Regulamentului REACH (CE) 1907/2006 si prevederile Regulamentului (CE) NR.1272/2008.

Specificatia tehnica de produs ce va contine informatii referitoare la: caracteristici tehnice, ambalare, marcare, depozitare;

6. AMBALARE SI MARCARE Produsele trebuie sa fie in ambalajele originale ale producatorului, sigilate, etichetate. Eticheta

trebuie sa contina denumirea produsului, principalele caracteristici tehnice, lotul si termenul de valabilitate pe ele.

7. DOCUMENTE Documente care sa ateste inregistrarea substantei daca aceasta intra sub incidenta

regulamentului REACH (Regulament european nr.1907/2006 CE) sau declaratie pe proprie raspundere.

- Documente care sa ateste ca societatea producatoare are implementat un sistem de asigurare

a calitatii;

8. LIVRAREA PRODUSELOR

Condiii de livrare : Livrarea la sediile laboratorelor ANB (sediile vor fi mentionate in comenzile emise de

Beneficiar) se asigur de ctre furnizor, cu mijloace de transport proprii i autorizate ( pentru transportul reactivilor).

Livrarea se face obligatoriu prin delegat nu prin curier. Livrarea se va face in funcie de necesiti, prin comenzi transmise electronic, sau manual prin

fax si/sau prin curierat catre operatorii economici. Produsele se vor livra pe toata perioada contractului, in termen de 5-6 saptamani de la primirea comenzii.

Se va respecta modul de ambalare solicitat. Puritatea trebuie sa fie mai mare sau egala cu cea specificata, iar continutul de impuritati

trebuie sa fie mai mic sau egal cu cel solicitat. La livrarea produselor Furnizorul va transmite ANB documente care insotesc produsele:

- factura fiscala sau documentul de insotire a marfii; - declaratie de conformitate; - certificat de calitate; - certificat de garantie cu data fabricatiei inscriptionata - fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si

1272/2008.

9. RESPECTAREA NORMELOR DE SECURITATEA MUNCII

Societatea care transporta produsul va respecta normele de securitate specifice; Este interzis accesul in incinta ANB neinsotit si fara informarea persoanelor de contact.

Beneficiarul va fi exonerat de orice responsabilitate in cazul unor accidente survenite din cauza nerespectatii protocolului de securitate sau normelor specifice de securitatea muncii pentru activitatea cuprinsa in cadrul acestui caiet de sarcini.

10. RESPECTAREA REGLEMENTARILOR PRIVIND CALITATEA SI MEDIUL

Se vor respecta reglementarile privind sistemul Calitatii si Mediului si Securitatii Muncii in perimetrul ANB;

Se vor respecta reglementarile si directivele in vigoare privind prevenirea poluarii si ameliorarea continua a performantelor in ceea ce priveste mediul in perimetrul ANB.

ANEXA 1

LOTUL 1 Nr.Crt.

Denumire produs Specificatii tehnice Documente TOTAL bucati 3 ani

1

2,6 dimetil fenol puritate 99.0,pudra sau cristale albe,flac 5g

certificate de calitate ,fisa cu date de securitate in limba romana, conform regulamentelor europene CE, REACH 1907/2006 si 1272/2008, valabilitate 2 ani de la data furnizarii;

90

2

Acetat de amoniu C2H7NO2 puritate acidmetric 98.0%; subst. insolubile 0,005%; val. pH (5%, apa 25grC) 6.7-7.3, Cl0,0005%, NO3 0,001%, SO40,001%; metale grele precum Pb0,0002%; Ca0,001%,flacon 1kg

certificate de calitate ,fisa cu date de securitate in limba romana, conform regulamentelor europene CE, REACH 1907/2006 si 1272/2008, valabilitate 1an de la data furnizarii;

33

3

Acetat de sodiu puritate >98.5 ;pH 7.5--9.2 ;cloruri

7

Acid clorhidric 1 N Calit.pH Eu; sol volumetrica, conc. 1M ;fl .1 L

certificate de calitate ,fisa cu date de securitate in limba romana, conform regulamentelor europene CE, REACH 1907/2006 si 1272/2008, valabilitate 1an de la data furnizarii;

54

8

Acid clorhidric 2 N/ c(HCl)=2 mol/l (2N) spec. density ~1.03 g/cm3 (20oC); pH value

16Bromocresol green-indicator/Brom cresol green C21H14Br4O5S (Verde de bromcrezol)

indicator ACS Reag.Ph Eur;solub in H2O(20grC);M=698,05 g/mol;metting point 217-218grC;bulk density 350kg/m3;loss on drying(110grC)

23

Clorura de amoniu(NH4Cl)

Puris, pa; reactiv ACS; 99,5%, Ph. Eur.; nitrati (NO3-): 5 mg/kg; fosfati (PO43-): 2 mg/kg; sulfati (SO42-): 20 mg/kg;As: 0.5 mg/kg; Ca: 5 mg/kg Cu: 2 mg/kg; Fe: 2 mg/kg; K: 50 mg/kg; Mg: 5 mg/kg; Na: 50 mg/kg; Ni: 1 mg/kg; Pb: 1 mg/kg; Zn: 2 mg/kg fl.500g

certificate de calitate ,fisa cu date de securitate in limba romana,conform regulamentelor europene CE, REACH 1907/2006 si 1272/2008, valabilitate 2 ani de la data furnizarii;

60

24

Clorura de bariu clorura de bariu dihidrat;puris p.a. ACS regent,99%M=244.26 g /mol;cristale albe;500g


3

25

Clorura de bariu/ Barium chloride dihydrate GR for analysis ACS,ISO,Reag. Ph EUr BaCl2*2H2O

spec density 3.86 g/cm3; solub in H2O 375 g/l (20oC) (anhydrous substance). M=244.28 g/mol; pH value 5.2-8.0 (50g/l, H2O, 25oC); melting point 963oC (anhydrous substance); bulk density ~1200-1400 kg/m3; boiling point 1560oC (anhydrous substance); assay (complexometric) 99.0%; insoluble matter 0.005%; pH value (5%; water) 5.0-8.0; N0,002%; heavy metals (as Pb)0.0005%; oxidizing substance (as NO3)0.005%; Ca0.005%; Fe0.0001%; K0.0025%; Na0.005%; Pb0.001%; Sr0.05%; loss on drying(150oC)14.0-16.0%,plastic bottle,1kg

certificate de calitate ,fisa cu date de securitate in limba romana,conform regulamentelor europene CE, REACH 1907/2006 si 1272/2008, valabilitate 1an de la data furnizarii;

12

26

Clorura de calciu CaCl2

Spec. density 2.15 g/cm3 (20oC); solub. in H2O 740 g/l (20oC); M=110,99 g/mol; pH value 8-10 (100g/l, H2O, 20 oC); melting point 772 oC; boiling point >1600oC; water absorption hygroscopic; assay (complexometric) 95,0%; free alkali (as Ca(OH)2) 0,2% plastic bottle, fl 1000 g


6

27

Clorura de calciu(CaCl2) praf;anhidru pur, p.a.>99%, flacon 250g


12

28

Clorura de fier hexahidrat(FeCl3*6H2O) puris p.a.,Reag.Ph.Eur 99%; As

31

Clorura de potasiu purris p.a. puritate 99,5-100,5%, pH 5,9, flacon 500g


3

32

Clorura de staniu SnCl2 2H2O puriss. p.a. ,ACS reagent, reag. ISO , reag. Ph. Eur. , 98% ; fl. 100g


3

33Clorura de staniu dihidrat/Tin (II) chloride dihydrate GR for analysis ACS, ISO, Reag. Ph Eur SnCl2*2H2O

spec. density 2.71 g/cm3 (20oC); solub in H2O 1187 g/l (20oC);M=225.63 g/mol; pH value ~1-2 (100 g/l, H2O, 20oC); melting point 38 oC; bulk density ~1250 kg/m3; boiling point 623oC(1013 hPa) (anhydrous substance); assay (iodometric, SnCl2*2H2O) 98.0-101.0%; SO40.002%; heavy metals (as Pb) 0.005%; As0.0001%; Ca0.005%; Cu0.001%; Fe0.002%; K0.005%; Na0.01%; NH40.002%; Pb0.005%; substances not precipitated with H2S (as sulphates)0.05%; glass bottle, flacon 250g


3

34

Cromat de potasiu purum p.a.;puritate 99.0% (RT) cloruri (Cl-): 50 mg/kg; Ca

39Formaldehida solutie 35%/ formaldehyde solution min. 35% GR for analysis, ACS, Reag.Ph Eur

Spec. density (20 oC) 1,08g/cm3;flash point ~62 oc; M = 30,03 g/mol; pH value (20 oC) ~ 3 - 4; melting point ~ -118oC; boiling point ~96-98 oC; assay(acidimetric after oxidation)34,5-38%;free acid (as HCOOH)0,1%; methanol (GC) 9,0-11,%; sulfated ash 0,1% flacon plastic - 250 mL


9

40

Glucoza D+ Glucose anhydrous for Byochem Reag Ph Eur; 1kg/flac


6

41

Hartie de filtru calitativa banda albastra banda albastra diam. 150mm, vit. filtrare:1870 sec/100 mL (Herzberg) dim. pori 2.5 m grosime 0.20 mm cont. cenusa 0.007% pachet x100buc


9

42

Heptamolibdat de amoniu tetrahidrat cont.99,3-101,8%;cristale albe;M=1235,86 g/mol ; fl. 250 g


57

43Hexametilen tetramina/ hexamethylenetetramine for synthesis C6H12N4

vapour pressure (20oC) low; spec density 1.33 g/cm3 (20oC); explosive limit 20g/m3 (dust); flash point 250 oCc.c.; solub in H2O 895 g/l(20oC); M=140.19 g/mol; pH value 7.0-9.0 (100 g/l; H2O, 20oC); bulk density ~600 kg/m3; ignition temp 390 oC; assay (HClO4) 99%, plastic bottle, flacon 1kg


72

44

Hexan cromatografic C6H14 / n-Hexane for liquid chromatography LiChrosolv

vapour pressure 160 hPa (20oC); spec density 0.66 g/cm3 (20oC); explosive limit 1.0-8.1 vol%; flash point -22 oCc.c.; solub in H2O 0.0095 g/l(20oC); M=86.18 g/mol; saturation conc. 563 g/m3; melting point -94.3 oC; boiling point 69 oC (1013 hPa; kin. viscozity 0.5 (20oC); ignition temp 240 oC (DIN 51794); putity (GC) 98%; residue on evaporating 1 mg/l; water 0.01%; acidity0.0002 meq/g; alkalinity0.0002 meq/g; transmission at 210 nm 50%; at 220 nm85%; from 245 98%; filtered by 0.2 m filter,glass bottle,flacon 1L


18

45

Hidrogenocarbonat de sodiu/ sodium hydrogen carbonate Gr for analysis ACS, Reag. Ph Eur NaHCO3

vapour pressure 972 hPa (100 oC); spec. density 2.22 g/cm3(20oC); M=84.01 g/mol; pH value~8.6 (50g/l, H2O, 20oC); melting point 270 oC(decomposition); bulk density~1000 kg/m3; assay acidimetric; calc. on dried substane 99.7-100.3 %; acidimetric 99.0-101.0%; insoluble matter max 0.015%; pH value (5%; water) max 8.6; Cl max 0.002%; PO4 max 0.001%; SO4 max 0.015%; phosphates and silicate (as SiO2) max 0.005%; sulfur compounds (as SO4) max 0.003%; N total max 0.0005%; NH4 max 0.0005%; heavy metals (as Pb) max 0.0002%; Ca max 0.01%; Cu max 0.0002%; Fe max 0.0005%; K max 0.005%; Mg max 0.005%; Pb max 0.0005%; iodine reducing matter (as I) max 0.0065%; loss on drying (Silica gel) max 0.2%; plastic bottle, fl 500 g


27

46

Hidrogenofosfat de potasiu(K2HPO4) anhidru;cont99%;materii insolubile0,01%Cl

54

Metilorange, C14H14N3NaO3S indicator complexonometrie, Solub. In H2O 5g/l (20oC); M=327.34g/mol; pH value-6.5 (5g/l, H2O, 20oC);melting point>300 oC;bulk density -200-400kg/m3; transition range pH3.1-pH4.4 pink-orange yellow;glass bottle; flacon100gr


18

55Murexid indicator/Murexide Amonium purpurate metal indicator ACS Reag Ph Eur

indicator complexonometrie, flacon 5 gr


27

56

Negru eriocrom T Reactiv Ph EUR, indicator pt.titrarea metelelor; C.I. 14645 fl. 25g


6

57

Nitrit de sodiu /Sodium nitrite NaNO2 GR for analysis ACS, Reag. Ph Eur

spec density 2.1 g/cm3 (20oC); solub in H2O 820 g/l(20oC); M=69 g/mol; pH value 9(100 g/l, H2O, 20oC); melting point 2801oC; bulk density 1200 kg/m3; boiling point 320 oC; assay (manganometric) 99.0%; insoluble matter 0.01%; Cl 0.005%; SO4 0.005%; heavy metals (as Pb)0.001%; Ca0.002%; Fe 0.001% K0.001%; plastic bottle, fl 250g


9

58 Permanganat de potasiu/Potassium permanganate GR for analysis ACS max0,000005%; oxidant in organic syntesis, volumetric solution in manganometry

assay iodometric min 99,0%;insoluble matter max0,1%;chloride,chlorate max 0,005%; sulphate max0,01%;total nitrogen max 0,003%; Cu max 0,001%;Fe max 0,002%; Hg max 0,0000005%, glass bottle,flacon 1kg


3

59 Permanganat de potasiu 0,1N/ Potassium permenganate solution for 1000ml c(KMnO4)=0,02 mol/lit (0,1N) titrisol

spec. density; 1,03g/cm3(20oC),solub in H2O(20oC) soluble, pH value 7.9 (20oC)poisson class(CH), concentration after dilution to 1 lit; c(KMnO4)=0,02mol/lit, amount-of-substance conc. ..c(KMnO4)=0,02 mol/lit+/-0,2%, titer(20oC)..1.000,fiole


114

60

Peroxidisulfat de potasiu (persulfat potasiu) calit.purum, p.a. purit.98,0% cloruri (Cl-): 50 mg/kg Ca: 50 mg/kg Cd: 50 mg/kg Co: 50 mg/kg Cu: 50 mg/kg; Fe: 50 mg/kg Na: 500 mg/kg Ni: 50 mg/kg Pb: 50 mg/kg Zn: 50 mg/kg fl.500 g


12

61

Peroxidisulfat de potasiu (persulfat potasiu) calit.purum, p.a. purit.98,0% cloruri (Cl-): 50 mg/kg Ca: 50 mg/kg Cd: 50 mg/kg Co: 50 mg/kg Cu: 50 mg/kg Fe: 50 mg/kg Na: 500 mg/kg Ni: 50 mg/kg Pb:50 mg/kg Zn:50 mg/kg fl.1kg


21

62

Rosu de metil

indicator ACS,Reag.Ph Eur, M=269,31g/mol, metling point 178-182C,bulck density=300-500kg/m3, Solub. In H2O (20oC), slightly soluble, M=269.31g/mol; melting point-178-182oC, bulck density=300-500 kg/m3, transitionn range pH4.4 - pH6 red -yellow, absorption maximum buffer pH 4.5 - 523-526 nm; buffer pH 6.2 427-437 nm; Spec. absorptivity A1% 1cm max;0.005g/l; buffer pH 4.5; calc. on anhydrous substance 1350-1450; max; 0.005g/l; buffer pH 6; calcul. on anhydrous substance 700-800;glass botlle;flacon 25gr


18

63

Salicilat de sodiu . Cali. puriss. p.a. puritate 99.5% (NT) 0.5% reziduu la uscare cloruri (Cl-): 100 mg/kg sulfati (SO42-): 600 mg/kg Cd: 5 mg/kg Co: 5 mg/kg Cr: 5 mg/kg Cu: 5 mg/kg Fe: 5 mg/kg Mn: 5 mg/kg Ni: 5 mg/kg Pb: 5 mg/kg Zn: 25 mg/kg fl.1kg


21

64

Salicilat de sodiu . Cali. puriss. p.a. puritate 99.5% (NT) 0.5% reziduu la uscare cloruri (Cl-): 100 mg/kg sulfati (SO42-): 600 mg/kg Cd: 5 mg/kg Co: 5 mg/kg Cr: 5 mg/kg Cu: 5 mg/kg Fe: 5 mg/kg Mn: 5 mg/kg Ni: 5 mg/kg Pb: 5 mg/kg Zn: 25 mg/kg fl.1kg


60

65Sarea de sodiu a acidului dodecansulfuric C12H25NaO4S;cont. min.99%;M=288,38g/mol, 100g


3

66 Sarea disodica a acidului etilendiamintetracetic EDTA-Na dihidrata

Calit.puris, p.a., pt. complexometrie 99,0%KT cloruri (Cl-): 50 mg/kg sulfati (SO42-): 50 mg/kg Ca10mg/kg, Cd5mg/kg, Cu5mg/kg, Fe5mg/kg,SO40,1%;flacon 500gr


15

67 Sarea disodica a acidului etilendiamintetracetic /ethylenedinitrilotetraacetic acid disodium salt dihydrate C10H14N2Na2O8*2H2O

solub in H2O 100 g/l (20oC); M=372.24 g/mol; pH value 4 - 5 (50g/l,H2O, 20oC); melting point 110oC(release of crystaline water); bulk density ~700 kg/m3; assay (complexometric, calc. on dried substance 99-101 %; pH value (5%, water 20oC) 4.0-5.5; in water insoluble matter 0.003%; Cl0.004%; SO40.01%; CN0.001%; heavy metals (as Pb)0.0005%; Cu0.0001%; Fe0.0005%; Pb0.001%; nitrilotriacetic acid (HPLC) 0.05%;loss on drying(105oC; 6h) 8.7 - 11.4%;plastic bottle;flacon 250gr


54

68Sarea disodica hidratata a acidului etilendiaminotetraacetic EDTA 0,1N /Titriplex III solution for 1000ml

dens 1,14g/cm3 (20oC);pH value 7.4-7.6 (20oC); WGK2; c(C10H14N2Na2O8*2H2O)=0.1 mol/l; amount of substance concentration c(C10H14N2Na2O8*2H2O)=0.1 mol/l+/- 0.2%; titer (20oC) 1.000 /Titriplex III solution for 1000ml,fiola


36

69Schimbator de ioni-cationit in forma acida de tip VIONIT CS 3, Dowex 50*8; Amberlite IR120

granule de 0,5-0,9mm, flacon 1kg


18

70 Sulfanilamida (4-aminobenzen sulfonamida) puritate >99.0, pudra alba,punct de topire164-166C,f lacon 500 gr


3

71Sulfat de aluminiu si potasiu AlK(SO4)2*12H2O

Alaun potasiu dodecahidrat calit. puris. p.a., reactiv ACS, Ph. Eur., purit.99.5% total impuritati 0.005% amoniu (NH4) cloruri (Cl-): 5 mg/kg As: 2 mg/kg Cd: 5 mg/kg Cu: 5 mg/kg Fe: 5 mg/kg Na: 100 mg/kg Pb: 10 mg/kg fl.500g


3

72

Sulfat de argint p.a ,99,5%,masa moleculara 311,8,pudra alba;titrare argintometrica;Ca10 mg / kg;Cd5 mg / kg;Co5 mg / kg ;Cr5 mg / kg ;Cu5 mg / kg;Fe5 mg / kg;Mn5 mg / kg;Mg5 mg / kg;Ni5 mg / kg;Pb5 mg / kg;Zn5 mg / kg;Na50 mg / kg;10 mg/kgCl fl 100gr


36

73Sulfat de fier II si amoniu hexahidratat (NH4)2Fe(SO4)2*6H2O purissp.a.

spec. density 1.86 g/cm3 (20oC); solub in H2O 269 g/l (20oC); M=392.14 g/mol;pH value 3-5 (50 g/l, H2O, 20oC); melting point 100oC; bulk density 900 kg/m3; WGK1; , assay (magnetometric) 99.0%; Cl

78Sulfat de N,N-dietilfenilen 1,4 diamina DPD formula chimica : NH2-C6H4-N(C2H5)2*H2SO4

M=262,36g/mol;pH value 2.0-2.2;metting point; assay min 99.5%: Plumb :max 0.001%; Fier :max 0.001%;apa max 0.5% flacon 100gr


3

79Sulfat de N,N-dietilfenilen 1,4 diamina DPD C10H18N2O4S GR for analysis

explosive limit 30g/m3; M=262,36g/mol;pH value 2.0-2.2(50g/l, H2O, 20oC);melting point 184-186oC;bulk density 580 kg/m3;boiling point 274-275 oC assay (HPLC, area%) 98%; Density (d20oC/4oC) 0.998-1.000; glass botle,flacon 100gr


9

80

Sulfat de potasiu(potasium sulfat) puris p.a.;ACS reagent,re.ISO,99%,masa moleculara 174,26;As

LOTUL 2 Nr.Crt.


1

Acetona ACS ISO, P.A./ Acetone GR for analysis ACS ISO Ph eur

Purit. (GC) .>/=99,8%; densitate(d20oC/20oC) 0.79-0.793;Solubilitate in apa conform; culoare

8

Acid clorhidric 37%

Conc.37%, 0.00005% clor liber (Cl) 0.0001% amoniac (NH4) 0.0001% metale grele (caPb) , 0.005% subst. nonvolatile, anioni: bromuri (Br-): 50 mg/kg fosfati (PO43-): 0.5 mg/kg sulfati (SO42-): 1 mg/kg sulfiti (SO32-): 1 mg/kg Al: 0.05 mg/kg As: 0.01 mg/kg Ba: 0.02 mg/kg Be: 0.02 mg/kg Li: 0.01 mg/kg Mg: 0.1 mg/kg Mn: 0.01 mg/kg Mo: 0.02 mg/kg Ni: 0.02 mg/kg Pb: 0.02 mg/kg Sr: 0.01 mg/kgfl .1 L


108

9Acid glutamic I - Glutamic acid for biochemestry, assay acidometric >/= 99,0;flac 1 kg


3

10

Acid ortofosforic

puris pa.; puritate 85% total impuritati KMnO4- subsatnte de reducere (caO)

16

Aliaj Devarda puris p.a.;powder light grey;metal trace analysis Al,Cu,Zn;azot total10mg/kg, ambalaj 1kg


15

17Aminobenzen sulfamida/4-aminobenzen sulfonamida Gr for analysis Reag. Ph Eur

solub in H2O 7.5 g/l (25oC); M=172.21 g/mol; pH value 5.8-6.1 (5 g/l, H2O,20oC); melting point 163-167 oC; bulk density ~500 kg/m3; assay 99.0-101.0%; heavy metals (as Pb) 20 ppm; sulfated ash0.1%;loss on drying0.5%;plastic bottle,fl 500g


27

18

Amoniac solutie 25%

carbonati max 10ppm;chloruri max 0,5ppm; fosfati max 0,5ppm; sulfati max 2ppm; sulfuri max 0,2ppm; Ag max 0,020ppm; Al max 0,500ppm; Au max0,100ppm; Ba max 0,050ppm; Bi max 0,100ppm; Ca max 0,050ppm; Cd max 0,050ppm; Cr max 0,050ppm Fe: 0.1 mg/kg; In: 0.02 mg/kg; K: 0.5 mg/kg; Li: 0.02 mg/kg; Mg: 0.1 mg/kg; Mn: 0.05 mg/kg; Mo: 0.05 mg/kg;Pb: 0.05 mg/kg; Pt: 0.1 mg/kg; Sn: 0.1 mg/kg; Sr: 0.2 mg/kg fl.1 L


105

19

Amoniac (Hidroxid de amoniu solution 25%,); ammonium hydroxide solution 25%GR for analysis

vapour pressure 483hPa (20oC); spec density 0.91 g/cm3 (20oC); explosive limit 15.4-33.6 Vol%; pH value (20oC) strongly alkaline; melting point -57.5 oC; boiling point 37.7 oC; assay(acidimetric, NH3) min 25.0%; carbonate(as CO2) max 10ppm;Cl max 0,5ppm; PO4 max 0,5ppm; SO4 max 2ppm ;S max 0,2ppm; Ag max 0,020ppm; Al max 0,500ppm; Au max 0,100ppm; Ba max 0,050ppm; Bi max 0,100ppm; Ca max 0,5ppm; Cd max 0,050ppm; Co max 0,050ppm; Cr max 0.05 ppm; Cu max 0.1 ppm; Fe max 0.1 ppm; Ga max 0.02 ppm; In max 0.02 ppm; K max 0.5 ppm; Li max 0.02 ppm; Mg max 0.1 ppm; Mn max 0.05 ppm; Mo max 0.05 ppm;Ni max 0.05 ppm; Pb max 0.05 ppm; Pt max 0.1 ppm; Sn max 0.1 ppm; Sr max 0.1 ppm; Ti max 0.1 ppm; Tl max 0.05 ppm; Zn max 0.1 ppm; subst. reducing potassium permanganate (as O) max 5 ppm; residue on ignition(as SO4) max10 ppm; non volatile matter max10 ppm;glass bottle,fl .1 L


210

20

Azotat de argint fixanal 0,1N, (16.988 g AgNO3) pt. prepararea sol. volumetrice,concentrate, calit. puris,p.a., fiole 0.1 M

certificate de calitate ,fisa cu date de securitate in limba romana,conform regulamentelor europene CE, REACH 1907/2006 si 1272/2008, termen de valabiltate minim 18 luni de la data furnizarii;

189

21

Azotat de potasiu (KNO3) p.a.; FL. 100 gr


3

22Camfor/DL-Camphor for synthesis C10H16O

vapour pressure 0.27 hPa (20oC); spec density 0.992g/cm3 (25oC); explosive limit 0.6-4.5 Vol%; flash point 64oC; solub in H2O 1.25g /l;(25oC); M=152.24g/mol; melting point 172-176 oC; boiling point 204oC; ignition temp 466oC; assay (GC, area%) 95%; melting range loer value170oC; plastic bottle, fl 5g


9

23

Celuloza celuloza microcristalina pentru coloana cromatografie 1 kg


3

24

Citrat trisodic dihidrat assay perchloric acid titration 99,0-101,0%, insoluble matter

31

Eter de petrol pf 40-60C;nonvolatile matter

39Oxalat de sodiu solutie standard volumetrica Solutie standard volumetrica 0,05Mol (0.1N); factor 0.098-1.002 flacon 1 L


54

40Phosphate Buffered Saline pentru determinare Cryptosporidium, flaconX100 tablete


3

41

Sodiu fosfat, solutie tampon pH=6,5 calit. HPCE solutie tampon pH=6,5 conductivitate ~1.8 mS/cm at 20 C conc.20 mM de sodiu fosfat fl.500ml


18

42

Sulfat de bariu p.a., fl. 1kg


3

43Sulfat de magneziu heptahidrat MgO4S*7H2O

BioUltra, 99.5% heptahidrat total impuritati: 0.002% total azot(N)pH 5.0-8.0(25 C,1 M in H2O) l: 5 mg/kg As:0.1mg/kg Ba:5 mg/kg Bi:5 mg/kg Cd: 5 mg/kg Co: 5 mg/kg Cr: 5 mg/kg Cu: 5 mg/kg Fe: 1 mg/kg Li: 5 mg/kg Mn: 5 mg/kg Mo:5 mg/kg Pb: 5 mg/kg Sr:5mg/kg Zn: 5 mg/kg fl.250g


42

44Sulfit de sodiu anhidru/ sodium sulfite anhydrous GR for analysis ACS ISO Reag Ph Eur Na2SO3

spec density 2.63g/cm3(20oC); solub in H2O 220g/l(20oC); M=126.04 g/mol; pH value 8.8-10 (50g/l, H2O, 20oC); melting point > 500oC (decomposition); bulk density ~1480 kg/m3; assay (iodometric) 97.0-100.5%; insoluble matter0.005%; titrable free base 0.03 meq/g; Cl 0.02%; S2O30.1%; heavy metals (as Pb) 0.001%; As 0.0001%; Cu 0.0005%; Fe 0.001%; Pb 0.0005%; Se 0.001%; Zn 0.001%; plastic bottle, flacon 500 g


9

45 Tiosulfat de sodiu 0,1N/ Sodium thiosulfate solution for 1000 ml c(Na2S2O3)=0,1 mol/l(0,1N) titrisol antichlor

spec.density-1,22g/cm3(20oC), pH value 9-10 (20oC), concentration after dilution to 1 lit: c(Na2S2O3x5H2O)=0,1 mol/l; titer(20oC)..1.000,fiola


24

46

Toluen

purit.99,7% purum; conc.37% dens:1.18g/ml;clor liber

47

Verde naftol C30H15FeN3Na3O15S3

Solub. in H2O160 g/l (20oC); bulk density 620 kg/m3 WGK 2; for preparation of mixed indicators of complexometry; absortion max. (water) 710-720 nm; spec. absorptivity A1%/1cm max; 0.005% water; calc. on dried substance) >/= 100; loss on drying (105oC)

LOTUL 3 Nr.Crt.


11.10 Fenantrolina/ 1,10-Phenanthroline chloride monohydrate GR for analysis and redox indicator- reagentfor ironII, Reag.Ph Eur C12H8N2 x H2OxHCl

Solub in H2O (20gr C0; M=234,69g/mol); metting point 215-220 C; bulk density = 370kg/m3; assay acidmetric >/= 99,5%; DANGEROUS FOR ENVIRONM.Plastic bottle, flacon 100 gr


15

2 1.10 Fenantrolina/1,10 Phenanthroline monohydrate GR for analysis and redox indicator- reagentfor ironII, Reag.Ph Eur C12H8N2 x H2O

Puritate>99%, pt. determinari spectrofotometrice, punct topire 98-101C, flacon 50g


15

3Albastru de metilen /Methylene blue (C.I. 52015) Reag. Ph Eur C16 H18CIN3S*xH2O

solub in H2O 50g/l (20oC); pH value ~3 (10g/l, H2O,20oC); melting point~180oC; bulk density ~400-600 kg/m3; absorption maximum max (ethanol 50%) 660-665 nm; spec.absorptivity A 1%1cm (max; 0,003g/l; ethanol 50%) 2250-2750; absorption ratio (635 nm; 0,003g/l; ethanol 50%) 0,56-0,62; sulfated ash (600oC) 1.0%,glass bottle,10g


18

4

Alcool etilic - Ethanol C2H6O

vapour pressure 59 hPa (20oC),spec. density 0.79-0.793g/cm3(20oC); M=46.07; pH value 7.0 (10 g/l, H2O, 20oC); melting point -114.5 oC; boiling point 78.3 oC; ignition temp. 425 oC(DIN 51794); higly flammable; purity (GC) 99.9%; color 10 Hazen; titrable acid 0.0002 meq/g; titrable base 0.0002 meq/g; density (d 20oC/20oC) 0.79-0.793; aldehydes (as acetaldehyd) 0.001%; subst. reducing potassium permanganate(as O) 0.0002%; carbonyl compounds(asCO)0.003%; acetaldehyde and acetal (GC) 0.001%; acetone 0.001%; benzene(GC) 0.0002%;ethylmethylketone (GC)0.02%;isoamylalcohol0.05%; methanol (GC)0.02%; 2-propanol (GC) 0.003%; total of other impurites (GC) 0.03%; higher alcohols (GC)0.01%; Cl0.3ppm; NO30.3ppm; PO40.3ppm; SO40.3ppm; Ag0.00002%; Al 0.00005%; As0.000002%; Au 0.000002%; Ba0.00001%; Be 0.000002%; Bi0.000002%; Ca0.00005%; Cd0.000005%; Co0.000002%; Cr0.000002%; Cu0.000002%; Fe0.00001%; Ga 0.000002%; In0.000002%; Li0.000002%; Mg0.00001%; Mn0.000002%; Mo0.000002%; Ni0.000002%; Pb0.00001%; Pt0.000002%; Sb0.000002; Sn0.00001%; Ti0.000002%; Tl0.000002%; V0.000002%; Zn0.00001%; Zr0.000002%; evaporation residue0.0005%; water0.1%; glass bottle 2.5L


78

5

Aliltiouree N-Allylthyoureea for synthesis;250 gr/flacon 250 g


6

6

Amidon / Starch soluble GR for analysis ISO (C6H10O5)n

solub in H2O 50 g/l (90oC); pH value 6.0-7.5(20g/l, H2O, 25oC); bulk density ~300 kg/m3; color white; description fine powder; pH value (2%; water) 6.0-7.5; reducing matter (as maltose) max 1.0%; sulfated ash max 0.4%;loss on drying(105oC, 2h)max 10%,flacon1Kg


6

7

Antimony potasium tartrat hemihidrat cont. 99-103%;As0,015%;Pb0,002%; pierdere prin uscare 2,7%, 250gr


3

8

Azotit de sodiu (nitrit de sodiu) Calit. puris. p.a., reactiv ACS, Ph. Eur., puritate 99% total impuritati 0.001% metale grele (ca Pb) cloruri (Cl-): 50 mg/kg sulfati (SO42-): 50 mg/kg Ca: 20 mg/kg Fe: 10 mg/kg K: 50 mg/kg fl. 50g

certificate de calitate ,fisa cu date de securitate in limba romana,conform regulamentelor europene CE, REACH 1907/2006 si 1272/2008, termen de valabiltate minim 18 luni de la data furnizarii

6

9Bicromat de potasiu/Potassium di chromate GR for analysis max 0,000001%Hg,ACS ISO;assay iodo metric min 99,9%

insoluble matter max 0,005%;chloride max 0,001%;sulphate max 0,005%;Ca max 0,002%;Cu max 0.001%;Fe max 0,001%, Hg max 0,000001%; Na max 0,02%;Pb max 0,005%, glass bottlefl.500gr


12

10Calceina/calcein indicator for metal determination C30H26N2O13

M=622,55g/mol; bulk density ~600 kg/m3; WGK3; loss on drying (110oC)7%;, glass bottle; fl 5g


12

11Camfor/DL-Camphor for synthesis C10H16O

vapour pressure 0.27 hPa (20oC); spec density 0.992g/cm3 (25oC); explosive limit 0.6-4.5 Vol%; flash point 64oC; solub in H2O 1.25g /l;(25oC); M=152.24g/mol; melting point 172-176 oC; boiling point 204oC; ignition temp 466oC; assay (GC, area%) 95%; melting range loer value170oC; plastic bottle, fl 250g


18

12

Carbonat de calciu pur, p.a.>99%, flacon 250g


3

13Clorura de cesiu/ Cesium chloride GR for analysis,assay ( argentome tric)min 99,5%;

sulphate max 0,002%;total nitrogen max 0,001%; aluminium max0,0005%;coppermax 0,0003%;iron max 0,0003%; potassium max 0,002%;lithium max 0,00005%magnesium max 0,0005%; sodium max 0,002%;lead max 0,0001%;rubidium max0,008%;zinc max 0,0003%, flacon 25g


12

14

Clorura ferica hexahidrata Iron (III) chloride hexahydrate GR for analysis ACS reag Ph Eur ; plastic bottle, 250 gr/flacon


3

15Clorura de magneziu hexahidrata/ magnezium chloride hexahydrate GR for analysis ACS, ISO, Reag. PH Eur MgCl2*6H2O

spec. density~1,57 g/cm3 (20oC); solub in H2O 1670 g/l (20oC); M=203,30 g/mol; pH value 4,5-7,0 (50 g/l, H2O, 20oC); melting point~117 oC(decomposition); assay (complexometric) 99,0-101,0%; insoluble matter0,005%; pH value (5%; water)5,0-6,5; Br0,05%; NO30,001%; PO40,0005%; SO40,002%; N0,0002%; heavy metals (as Pb)0,0005%; Al0,0005%; As0,0002%; Ba0,002%; Ca0,003%; Cu0,0005%; Fe0,0005%; K0,001%; Mn0,0005%; Na0,001%; NH40,002%; Pb0,0005%; Sr0,005%; water 51,0-55,0%; plastic bottle, fl 250 g


9

16

Dicloroizocianurat de sodiu dihidrat Substanta calibrata pentru det. fotometrica a clorului activ ; pur;puritate 98.0% (AT); cloruri

22

Hidroxid de sodiu solutie 1M conc.1M sol.pentru HPCE,fl.100mL


3

23Hipoclorit de sodiu/sodium hypochlorite solution (6-14%)

vapour pressure 20hPa (20oC);spec density 1.22-1.25 g/cm3 (20oC); melting point -20oC; boiling point 102oC; assay (active chlorine; iodometric, Cl2) 6-14%;free alkali(acidimetric, as NaOH) 1.0%; plastic bottle, 2,5l


6

24

Iodat de potasiu / Potassium iodate GR for analysis ACS ISO Reag Ph Eur KIO3

spec density 3.98g/cm3 (20oC); solub in H2O 92 g/l (25oC);M=214 g/mol; pH ~6 (50g/l, H2O,20oC); melting point 560oC; bulk density ~2000 kg/m3; assay iodometric 99,7-100,4%, insoluble matter max 0,005%, ph value (5%;water) 5,0-8,0; I max 0,001%, SO4 max 0,005%, N max 0.002%; chloride, chlorate, bromide,bromate (as Cl) max 0.01%; Heavy metals (as Pb) max 0,0005%, Fe max 0,001%; Na max 0.005%; loss on drying (130oC)max0.05%,plastic bottle,flacon 100gr


12

25Metanol anhidru de puritate pentru cromatografie, 1 L


15

26 Modificator de matrice- magneziu/ magnezium matrix modifier for graphite furnance AAS c(Mg)=10,0+/-0,2g/lit (Mg(NO3))2*6H2O;spec. density 1,05g/cm3(20grC);solub in H2O(20grC)soluble

silver max 0,000002g/lit;arsenic max 0,000010g/lit;cadmium max 0,000001g/lit lead max 0,000010g/lit;selenium max 0,000100 g/lit; thallium max 0,0000010g/lit,fl.50mL


3

27 Modificator de matrice-paladiu/Palladium matrix modifier for graphite furnace AASc(Pd)=10,0+/- 0,2g/lit (Pd(NO3)2/HNO3 ca; dens.1,11g/cm3(20grC), solub in H2O

silver max 0,000020g/lit;arsenic max 0,000010g/lit; cadmium max 0,0000010g/lit lead max 0,000010g/lit;selenium max 0,00010g/lit; thallium max 0,000020g/lit,fl.50mL


3

28Modificator de matrice fosfat/ Phosphate modifier for graphite fu mance AAS, dens: 1.052g/cm3

pH value 5, boilling point 100 grC, plasti bottle,fl.50mL


3

29Multi element standard X for surface water, echivalent cu NIST SRM 1643d

matrix 1mol/l acid azotic,As 50mg/l,B 100g/l,Ba 50g/l,Be 20g/l;Cr 20g/l;Cu 20g/l;Fe 100g/l;K3000g/l; Mg15000g/l; Mn 30g/l; Mo100g/l;Na 8000g/l;Ni 50g/l;Pb 25g/l;Se10g/l;Sr100g/l;Tl10g/l; V 50g/l;Zn 50g/l;fl.250mL


3

30Multi element standard XXI Set,Contains 274473 and 108623,Hg in sticla separata

matrix 5% acid azotic; Ag,Al,As,Ba,Be,Bi,Ca,Cd,Co,Cr,Cs,Cu,Fe,Ga, Hg,In,K,Li,Mg,Mn,Na,Ni,Pb,Rb,Se,Sr,Tl,U,V,Zn 10mg/;fl.250mL


3

31 Multi element standard V 26 elemente,designed for Maxim,Wavelenght calibration standards

Al 20mg/l;As 20mg/l;B 2mg/l;Ba 2mg/l;Be 1mg/l;Ca 10mg/l;Cd 2mg/l;Cr 2mg/l;Cu 2mg/l;Fe 2mg/l;Hg 5 mg/l;K100mg/l;Li 2mg/l;Mg 1mg/l;Mn 1mg/l;Na 20 mg/l;Ni 5mg/l;P 10mg/l;Pb 20mg/l; Sc 1mg/l;Se 20mg/l;Sr 1mg/l;Te 20mg/l;Ti 2mg/l;Y 1mg/l;Zn 2mg/l;fl.250mL


3

32N (1-naftil) etilen diamina diclorhidrat C12H14N2.2*HCl.CH4O

puris,p.a.,puritate >=99%calitate spectrofotometrica pt.det. nitrati si nitriti,punct topire 197.3,water 0.07%, fl.25 g


15

33 N naftil etilen diaminodiclorhidrat/N-(1-naphthyl) ethylene diamine dihydrochloride GR for analysis C12H16Cl2N2

for the det of sulfonamide in blood end nitrite solub. in H2O(20oC) M=259.18g/mol, pH value=1.0, bulk density 380kg/m3,iritant;glass bottle; flacon 5 gr


18

34

Nitrit de sodiu Calit. puris. p.a., reactiv ACS, Ph. Eur., puritate 99% total impuritati 0.001% metale grele (ca Pb) cloruri (Cl-): 50 mg/kg sulfati (SO42-): 50 mg/kg Ca: 20 mg/kg Fe: 10 mg/kg K: 50 mg/kg fl. 50g

certificate de calitate ,fisa cu date de securitate in limba romana,conform regulamentelor europene CE, REACH 1907/2006 si 1272/2008, termen de valabiltate minim 18 luni de la data furnizarii

3

35Peroxidisulfat de potasiu/ Potassium peroxidisulfate GR for analysis /= 99,0%;insoluble matter

38Sulfat de argint for analysisi ACS; assay argentometric

LOTUL 4 Nr.Crt.


1 Solutie standard 1000ppm aluminiu azotat de aluminiu in acid azotic 0.5mol/l; fl 100ml certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

2 Solutie standard 1000ppm arsen acid arsenios in acid azotic 0.5mol/l; fl 100ml certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

3 Solutie standard 1000ppm cadmiu azotat de cadmiu in acid azotic 0.5mol/l ; fl 100ml certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

4 Solutie standard 1000ppm crom azotat de crom(3+) in acid azotic 0.5mol/l ;fl 100ml certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

5 Solutie standard 1000ppm cupru azotat de cupru in acid azotic 0.5mol/l; fl 100ml certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

6 Solutie standard 1000ppm fier azotat de fier(2+) in acid azotic 0.5mol/l; fl 100ml certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

7 Solutie standard 1000ppm mangan azotat de mangan(2+) in acid azotic 0.5mol/l; fl 100ml certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

8 Solutie standard 1000ppm mercur azotat de mercur (2+) in acid azotic 0.5mol/l, fl 100ml certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

9 Solutie standard 1000ppm nichel azotat de nichel (2+) in acid azotic 0.5mol/l; , fl 100ml certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

10 Solutie standard 1000ppm plumb azotat de plumb(2+) in acid azotic 0.5mol/l; , fl 100ml certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

11 Solutie standard 1000ppm seleniu dioxid de seleniu in acid azotic 0.5mol/l; , fl 100 ml certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

12 Solutie standard 1000ppm zinc azotat de zinc in acid azotic 0.5mol/l; fl 100 ml certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

13 Solutie standard 1000ppm sodiu azotat de sodiu in acid azotic 0.5mol/l;fl.100ml certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

14 Solutie standard 1000ppm Stibiu Sb2O3 in acid clorhidric 2mol/l l; fl 100ml certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

15 Solutie etalon TOC 1000 mg/l fl 100 mL; sol standard TOC To En 1484-H3/DIN 38490H3 sa potassium hydrogen phtalate in water stab ; CertiPur; densit 1,003 g/cm3

certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

LOT UL 5 Nr.Crt.


1 (1,2,3,4,10,10-hexacloro-epoxi-octahidro-dimetano-naftalen DIELDRIN Standard analitic PESTANAL, pt.GC, fl.100mg certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

2 (2-(2- clorofenil)-2- (4-clorofenil)-1,1-dicloroetan 2,4 DDD Standard PESTANAL pentru GC,fl. 250mg certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

3 1,1,1- tricloro-2,2-bis(4-clorofenil)etan 4,4 DDT-Standard analitic PESTANAL, fl. 100 mg certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

4 1,1,2,2-tetracloroetan Standard pt. GC puritate 99.5% 1.586 g/mL la 25C fl. 5 ml, certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

5 1,1,2,2-tricloroetilena Standard pt. GC conc. 5000 g/mL in methanol fiola de 1 ml, 5000 g/ml certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

9

6 1,2 Dichloroethane Standard puriss. p.a., pentru GC, puritate 99.9% densit. 1.256 g/mL la 25 Cfl. 1 ml, pt. GCcertificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

7 1,2 Dichloroethane ALDRIN Standard analitic PESTANAL pt.GC,fl.250mg certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

8 2-(2- clorofenil)-2-(4-clorofenil)-1,1,1-tricloroetan 2,4-DDT Standard PESTANAL pt. GC, fl. 100 mg certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

9 2,2 - bis - (4-clorofenil)-1,1- dicloroetan 4,4 DDE Standard analitic PESTANAL, fl. 250 mg certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

10 alfa- Hexaclorociclohexan -HCH Standard analitic PESTANAL, pt.GC, fl.100 mg certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

11 beta- Hexaclorociclohexan -HCH Standard analitic PESTANAL pt. GC, fl.100 mg certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

12 Brom -diclor-metan CHBrCl2 Standard analitic, stabilizat cu amilena punct fierbere 119-120 C/748 mmHg(lit.) punct topire 22 C(lit.) densitate 2.451 g/mL la 25 C fl. de 1 g, pt. GC


3

13 delta- Hexaclorociclohexan -HCH Standard analitic PESTANAL,pt. GC fl. 50 mg certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

14 Dibrom-clor-metan CHBr2Cl Standard analitic, stabilizat cu amilena density 1.98 g/mL at 25 C;, punct topire -55C , punct fierbere 87C fl. de 1 g, pt. GC


3

15 Fractie Hexan Calit. GC punct fierbere: 66-70 C densitate: 0.67 g/mL la 20 C fl. de 1 L, pur , pt. GC certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

12

16 gama- Hexaclorociclohexan -BHC; LINDAN Standard analitic PESTANAL, pt. GC fl. 250 mg certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

LOTUL 6 Nr.Crt.


1 Tribrom metan Standard analitic, densitate 2.89g/ mL 25C, punct topire 5 to 8 C punct fierbere 146-148 C fl. de 1 g, pt. GC


3

2 Trihalometani amestec standard Standard tip calibrare, conc.100 g/mL fiecare component in metanol; fiola de 1 ml, certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

9

3 Amestec standard de trihalometani 200g/mL in metanol, fiole de 1 mL contine : triclor metan, brom diclor metan, dibrom clor metan, tribrom metan certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

36

4 Amestec standard de pesticide organoclorurate 200g/mL in hexan:toluen (50:50), fiole de 1 mL

contine : aldrin, alfa HCB, alfa clordan, beta HCB, decaclor orto bifenil, delta HCB, dieldrin, endosulfan I (alfa), endosulfan II (beta), endosulfan sulfat, endrin, endrin aldehida, endrin cetona, gama HCB, gama clordan, heptaclor, heptaclor epoxid izomer B, metoxiclor; 2,4,5,6 tetraclor meta xilen;4,4' DDD;4,4' DDE;4,4' DDT


36

5 Amestec standard fractie BTEX 200g/mL in metanol, filoe de 1 mL contine : benzen, etil benzen, toluen, orto xilen, meta xilen, para xilen certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

6 Amestec standard compusi organici volatili 2000g/mL in metanol, fiole de 1 mL

contine : benzen, brom benzen, brom clor metan, brom diclor metan, bromoform, n butil benzen, sec butil benzen, tert butil benzen, tetraclorura de carbon, clor benzen, cloroform, 2 clor toluen, 4 clor toluen, dibrom clor metan, 1,2 dibrom 3 clor propan, 1,2 dibrom etan, dibrom metan, 1,2 diclor benzen, 1,3 diclor benzen, 1,4 diclor benzen, 1,1 diclor etan, 1,2 diclor etan, 1,1 diclor etena, cis 1,2 diclor etena, trans 1,2 diclor etena, 1,2 diclor propan, 1,3 diclor propan, 2,2 diclor propan, 1,1 diclor propena, cis 1,3 diclor propena, trans 1,3 diclor propena, etil benzen, hexaclor butadiena, izopropil benzen, para izopropil toluen, clorura de metilen, naftalina, n propil benzen, stiren, 1,1,1,2 tetraclor etan, 1,1,2,2 tetraclor etan, tetraclor etena, toluen, 1,2,3 triclor benzen, 1,2,4 triclor benzen, 1,1,1 triclor etan, 1,1,2 triclor etan, triclor etena, 1,2,3 triclor propan, 1,2,4 trimetil benzen, 1,3,5 trimetil benzen, meta xilen, orto xilen, para xilen


36

7 Amestec standard compusi organici volatili, fractie usoara (gaze), 2000g/mL in metanol, fiole de 1 mL

contine : brom metan, clor etan, clor metan, diclor difluor metan, triclor fluor metan, clorura de vinil


3

8 Amestec standard intern 2500g/mL in metanol, fiole de 1 mL contine : brom clor metan, 1,4 difluor benzen, clor benzen d6 certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

9 Aamestec standard surogat 2500g/mL in metanol, fiole de 1mL contine : 4 brom fluor benzen, 1,2 diclor etan d4, toluen d8 certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

10 Standard epiclorhidrina minim 500g/mL in metanol (sau acetat de etil, acetona), fiole de 1 mL


3

11 1,2 diclor etan 200g/mL in metanol, fiole de 1 mL certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

12 1,1,1,2 tetraclor etan 200g/mL in metanol, fiole de 1 mL certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

13 1,1,2,2 tetraclor etan 200g/mL in metanol, fiole de 1 mL certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

14 Triclor etena 200g/mL in metanol, fiole de 1 mL certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

15 Clorura de vinil 200g/mL in metanol, fiole de 1 mL certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

16 Standard intern 1,4 difluor benzen 2500g/mL in metanol, fiole de 1 mL certificat de calitate ,fisa de securitate in limba romana conform regulament CE, REACH 1907/2006 si 1272/2008, valabilitate 1 an de la data furnizarii

3

17 Standard intern pentru pesticide pentaclor nitro benzen, minim 500g/mL in metanol (sau acetat de etil, acetona), fiole de 1 mL


3

18 Standard surogat pentru pesticide 4,4' dibrom bifenil minim 500 g/mL in metanol (sau acetat de etil acetona), fiole de 1 mL


3

19 Amestec standard de pesticide organoclorurate 200g/mL in metanol , fiole de 1 mL

contine : aldrin, alfa HCB, alfa clordan, beta HCB, decaclor orto bifenil, delta HCB, dieldrin, endosulfan I (alfa), endosulfan II (beta), endosulfan sulfat, endrin, endrin aldehida, endrin cetona, gama HCB, gama clordan, heptaclor, heptaclor epoxid izomer B, metoxiclor; 2,4,5,6 tetraclor meta xilen; 4,4' DDD; 4,4' DDE; 4,4' DDT


3

2013-03-04T12:26:03+0200Mihai Savin

Apa Nova Caiet de Sarcini Reactivi

Documents

Transcript of Apa Nova Caiet de Sarcini Reactivi