Post on 02-Jun-2018
8/11/2019 Gama de Produse_UK
http://slidepdf.com/reader/full/gama-de-produseuk 1/2
Standardproductrange
SCHMOLZ + BICKENBACH Group
Eupener Straße 70
D-40549 Düsseldorf / Germany
www.schmolz-bickenbach.com
8/11/2019 Gama de Produse_UK
http://slidepdf.com/reader/full/gama-de-produseuk 2/2
0.8 – 130 mm
2 – 60 mm
2 – 60 mm
2 – 18 mm
10 x 3 – 100 x 40 mm
Stainless and heat-resistant steel
Tool steel
Engineering steel
Aerospace materials AusteniticDuplex steelsFerriticMartensitic
Alloyed / unalloyed
Cold-work tool steelsHigh-speed steelsHot-work tool steelsPlastic mould steels
Alloyed / unalloyed
Case hardening steelsCreep-resistantstructural steelsFree cutting steelsHigh-grade steelsNitriding steelsQuenched andtempered steelsWear-resistant steels
Drill collarsdiameter up to 280 mm(round)length up to 10 m
Pre-machinedrotationally symmetricalforgings forged to shape
Pre-machined rotationallysymmetrical forgingsforged to shape
WeldedOutside diameter: 10.2 – 711 mmWall thickness: 1.4 – 32 mm
SeamlessOutside diameter: 17.2 – 660 mmWall thickness: 4.5 – 100 mm
0.8 – 130 mm
2 – 22 mm
2 – 18 mm
0.8 –250 mm
Dra wn : u p to 100 m mGround bright: 110 – 150 mm
7 – 100 mm
2 – 60 mm
6 x 3 mm – 500 x 40 mm
Width: up to 2000 mm Thickness: 2 – 205 mm
Width: up to 2000 mm Thickness: 0.5 – 50 mmLength: up to 6000 mm
Wire rod5 – 32 mm
12,4 – 28 mm
Drawn wire0.013 – 22 mmCoils, spools,baskets, reels
Profiles1 – 60 mm2
Coils, reels,straightened products
Wire rod5.5 – 27 mm
Wire rod5.5 – 27 mm
Ingots0.6 – 40 t
Continuous casting
138, 150, 265 mm
475 x 340 mm
Semi-finished products
50 – 320 mm,rising in 1 mm increments
Ingots1 – 40 t
Continuous casting
138, 150, 265 mm
475 x 340 mm
Semi-finished products
50 – 320 mm,rising in 1 mm increments
Ingots1 – 40 t
Continuous casting
138, 150, 205, 265 mm
475 x 340 mm
Semi-finished products
50 – 320 mm,rising in 1 mm increments
7 – 250 mm
50 – 160 mm
Wid th : 80 – 510 m m Thickness: 24 – 160 mmWidth/thicknessratio 10:1 max.
Open-die forgings,rotationally symmetricalforgings forged to shapeon request up to 50 tsingle-piece weight
65 – 700 mm
50 – 750 mm
Single-piece weightup to 23 t
Open-die forgings, rotationallysymmetrical forgings forgedto shape on request up to50 t single-piece weight
65 – 900 mm
50 – 750 mm
Single-piece weightup to 23 t
Open-die forgings,rotationally symmetricalforgings forged to shapeon request up to 50 tsingle-piece weight
65 – 900 mm
50 – 750 mm
Single-piece weightup to 23 t
Pre-machined parts, turnedparts, pre-machined moulds,dies and frames to customerspecification
Cold rolls20 – 750 mm diameter
Mandrels diameterup to 280 mm (round)length up to 28 m
Pre-machining Tu besForged products / Extruded aluminiumproducts
Bright steelHot barsrolled
Wire rod / Drawn wire
Sheet steelIngotsContinuous castingSemi-finished products
Standard product range
Steel
7 – 250 mm
3 – 60 mm
50 – 160 mm
Wid th : 80 – 510 m m Thickness: 24 – 160 mmWidth/thicknessratio 10:1 max.
7 – 250 mm
50 – 160 mm
Wid th : 80 – 510 m m Thickness: 24 – 160 mmWidth/thickness ratio 10:1 max.
Ferro-Titanit ®
Various sizes according tocustomer requirements
Round bars(cold-drawn, extruded)10 – 500 mm
Profiles(squares, hexagons,on request according tocustomer drawings)
Wid th : u p to 800 m m Thickness: 4 – 10 mmLength: up to 2000 mm
40 x 5 mm – 180 x 20 mm(cold-drawn, extruded)
Aluminium
Cut-to-size plates6 – 150 mmsizes from 15 x 15 mm
Standard sheets rolled Thickness: 0.5 – 5 mm Sizes: 1000 x 2000 mm, 1250 x 2500 mm, 1500 x 3000 mm
Plates rolled Thickness: 5 – 150 mm Sizes: 1000 x 2000 mm, 1250 x 2500 mm, 1500 x 3000 mm
Chequer plates rolled (duett - 2 bar, quintett - 5 bar) Thickness: 2.5 / 4 mm – 5 / 6.5 mmSizes: 1000 x 2000 mm, 1250 x 2500 mm, 1500 x 3000 mm
Individual specifications and dimensions supplied on request. Depending on the material used, dimensional restrictions are possible.General note (liability): All statements regarding the properties or utilization of the materials or products mentioned are for the purpose of description only. Guarantees regarding the existence of certain properties or a certain utilization are only ever valid if agreed upon in writing.
6 x 1 mm – 88.9 x 5 mmwelded process tubes annealed
6 x 1 mm – 609.6 x 5 mmwelded process tubes not annealed
8 x 1 mm – 129 x 2 mmwelded construction and decoration tubes
13 x 1 mm – 204 x 2 mmwelded dairy tubes
10 x 10 x 1 mm – 200 x 200 x 10 mm20 x 10 x 1 mm – 300 x 100 x 8 mmwelded square and rectangular tubes
40 x 10 x 1.5 mm – 80 x 20 x 2 mmSpeciality: flat profile tubes
Speciality: thick-wall tubes for steelconstruction incl. 10 mm wall(150 x 150 x 10 mm)