MINOS-EURONET

Un nou proiect de SSA coordonat de Romania

Prezentarea proiectului MINOS-EURONET

Prezentarea (care va fi disponibila si pe Internet) are doua parti.

• Prima parte, in limba romana, contine o descriere generala a proiectului, subliniind utilitatea acestuia pentru comunitatea stiintifica din Romania.

• O a doua parte, in limba engleza, prezinta scurte extrase din textul propunerii. Informatia este legata in principal de partenerii importanti din vestul Europei

Tip instrument, competitie

• Proiectul MINOS-EURONET face parte din categoria « specific support actions » (SSA), la fel ca si ROMNET-ERA.

• Activitatile finantate sunt, printre altele: • crearea unor baze de date, a unor publicatii electronice, • organizarea unor manifestari de informare si diseminare de

informatie, inclusiv a unei conferinte stiintifice anuale.• MINOS va fi finantat din competitia IST 3 (prioritatea

2, Information Society Technologies), facand parte din categoria proiectelor suport (SSA) destinate integrarii noilor state membre ale UE, precum si tarilor asociate si candidate.

• Tematica corespunde domeniului « micro- si nanosisteme », una din directiile prioritare din IST.

O retea de retele• Obiectivul major al proiectului este crearea unei

retele pan-europene in domeniu. Deci a unei retele care sa se extinda atat in vestul Europei (“vechile” state membre), cat si in estul acesteia.

• Propunerea MINOS este deosebit de ambitioasa din acest punct de vedere, deoarece o parte dintre cei 18 parteneri din consortiu sunt la randul lor coordonatori ai unor mari consortii, de regula retele de excelenta si proiecte integrate. Altii sunt coordonatori ai unor retele nationale. Ca urmare, MINOS corespunde unei « retele de retele ». Numai retelele corespunzatoare a 8 proiecte din PC6 coordonate de catre parteneri MINOS totalizeaza nu mai putin de 159 de parteneri europeni diferiti, majoritatea covarsitoare din vestul Europei.

Tematica avansata

• Propunerea este orientata catre integrarea « micro-nano-biotehnologiilor ».

• Aceasta reprezinta o tendinta de ultima ora pentru PC6 (recent s-a incheiat o competitie comuna pe prioritatile 2 si 3) si o perspectiva enuntata pentru PC7.

• In consortiul MINOS sunt coordonatori de retele de excelenta atat din prioritatea 2, cat si din prioritatea 3.

• Comisia Europeana (aici DG INFOSOC, care gestioneaza proiectul) manifesta deschidere atat pentru colaborarea cu alte prioritati, cat si pentru contacte in afara Europei.

• O completare la propunerea initiala este organizarea unor « forum »-uri de aplicare a noilor tehnologii pe tematici cum ar fi « mediu » sau « sanatate ».

• Aceste actiuni ar urma sa sensibilizeze si factorii de decizie din tarile Europei de est, cu scopul de a orienta programele nationale de cercetare in directia cooperarii europene.

O triada de proiecte suport coordonate din INCD-Microtehnologie.

• Primul dintre ele este ROMNET-ERA (2004-2006), care are un profil tematic mai larg dar este destinat exclusiv Romaniei.

• Al doilea, numit MINAEAST-NET (2004-2006), initiaza si dezvolta retelele nationale din Europa de est, in domeniul micro- si nanotehnologiilor.

• In fine, MINOS-EURONET (2005-2008) este focalizat pe micro- si nanosisteme, dar asigura interactiunea (networking) la nivel european.

Importanta proiectului MINOS-EURONET

• Un proiect inovator si deosebit de complex, care beneficiaza de existenta “noilor instrumente” din PC6, realizand pentru prima data o “retea de retele europene”

• Multiplicarea si diversificarea contactelor pentru participarea la proiecte europene

• O mai buna vizibilitate a tarilor din estul Europei (inclusiv a Romaniei)

Site Internet

• Pagina de web publica:

www.minos-euro.net

• Platforma de comunicatii

(acces controlat):

http://eroom.nano-link.net/minos

Proposal full title

• Full title: MIcro-NanOSystems EUROpean

NETwork pursuing the integration of NMS and ACC in ERA

• Proposal acronym: MINOS -EURONET

Proposal abstract (1) • MINO-EURONET is devoted to stimulating,

encouraging and facilitating the participation of New Member States (NMS) and the Associated Candidate Countries (ACC) in the activities of IST.

• The proposal has a pan-European focus on one strategic objective in IST, namely micro- and nanosystems.

• The proposal is addressing the following objectives: (1) Revealing and promoting the research competences

from NMS and ACC, namely competences which are relevant for the development of the field of micro-nanosystems at the European scale;

(2) Facilitating the participation of NMS and ACC organisations to EU programmes and other activities in the field of micro-nanosystems;

(3) Performing extensive networking at the pan-European scale in the field of micro-nanosystems.

Proposal abstract (2) • The proposal is put forward by 18 partners. The backbone of

this powerful consortium is constituted by the Western research organisations which are coordinators of 8 other big projects in FP6. This cluster is totalling 159 different organisations, which provides a critical mass for pan European networking. This cluster of 8 independent projects is covering a broad spectrum of technologies and applications, requiring broad multidisciplinary science and engineering and displaying an exciting potential of cooperation for NMS and ACC.

• Activities, organized in four work packages for support activities devoted, respectively, to: (i) extensive networking, using an integrated communication platform;(ii) creation, maintenance, promotion and linking of databases of

researchers, research and industrial organisations, enhancing the visibility of potential partners from NMS and ACC and promoting participation to EU programmes;

(iii) the organisation, with the same purpose of brokerage events and seminars, primarily in NMS and ACC,

(iv) (iv) organisation of three annual editions of a new European research conference devoted to “Microsystems as a platform for integrating technologies”.

Thematic areas and objectives

Detailed objectives of the strategic direction in priority 2 (IST) are, among others : • to integrate sensing, actuating, computing, processing

devices including power optimisation in a wide range of materials (such as plastic, textile, paper, and concrete) in particular for flexible and/or portable applications;

• to improve and to intensify the interaction between man, machine, ambient, and device, integrating very different ‘properties’, sciences, environments and technologies exploring the application potential of micro-nano technology and the integration of nano dimensions in macro and micro systems;

• to research the interconnect and integration technologies required to establish the nano to macro interface and

• to have ‘nano’ interacting with their ambient.

Common call priorities 2 and 3

• A common call with priority 3 (NMP) was launched in order to develop new medical instruments and/or intelligent diagnosis equipment for healthcare of the future, using advanced biosensors (including biological sensors).

• Significant applications are expected from the integration of technological developments - in particular of biosensors and smart and hybrid materials that may interact with their surroundings, precision engineering, micro- and nano-fluidics, and opto/electromagnetic methods with greater knowledge of the interactions between biological and non-biological systems.

Convergence of technologies

• After the first successful calls, the evolution of the field seems to be already dominated by mixed technologies, or the convergence of micro-nano-biotechnologies.

• This tendency is expected to continue also in the last calls of FP6, as well as in FP7. Indeed, the overall trend seems to be the convergence of IST (including microtechnologies), nanotechnologies and biotechnologies.

• New materials (such as polymers used in microsystem technologies) are an important factor for innovation.

• Nanofluidics and nanochemistry are also expected to play an important role.

• ICT (Information and Communication Technologies) for health will continue to remain, perhaps, an important topic, with new micro-nanosystems for diagnosis and healthcare.

The backbone of the network

• The characteristic of this project is given by the presence in the project consortium of eight coordinators of big FP6 projects. 5 NoEs and 2 IPs (mostly from IST) are involved.

• These projects are representing a very powerful cluster, providing a unique pool of potential connections for the human resources in NMS and ACC.

NanobiotechnologiesNano2Life (Bringing NANOtechnologies TO

LIFE), NoE, priority 3, NMP. • Scientific and technological area:

Nanobiotechnology area of complex and integrated novel sensor technologies.

• Application domain: Health care, pharmaceuticals, environment, security, food safety, etc. The network support the development of nanoparticles and nanofluidics handling, integrated systems: cells, lab-on-chip.

• Expected implications: To keep Europe as a competitive partner the field of nanobiotechnology. Nano2Life intends to tackle fragmentation, to durably integrate organizations, to interface two worlds: nano and bio, to translate science into economic benefits and educate society about nanobiotechnologies.

Micro-nanotechnologies for healthHEALTHY AIMS (Nano scale materials and

sensors and microsystems for medical implants improving health and quality of life),

IP in priority 2, IST• Scientific and technological area: Technologies involved: RF

Communications and power source for implanting into the human; Biocompatible materials; Micro-electrodes; Micro-assembly techniques, Sensors and actuators to fit inside the body.

• Application domain: New implantable medical devices: Cochlear implant; Retina implant and glaucoma sensor; FES for upper and lower limbs; Artificial intra-urethral sphincter; Sphincter sensor; Intracranial pressure sensor for long term implant (>10 years).

• Expected implications: Usage of microsystems and nanotechnology in the medical sector, thus ultimately improving the quality of life for citizens across Europe.

Food quality and safety

GOOD FOOD (Food Safety and Quality with Microsystems), IP in priority 2, IST

• Scientific and technological area: Micro and Nanotechnology (MST and M&NT): Micro fluidic system for residue concentration; Integrated optical sensor combined with smart CMOS camera detector; Gas sensors array based on metal oxide and cantilevers; Single chip array of gas sensors on micro machined membranes; Electronic tongue.

• Application domain: Food safety and quality: fast antibiotics residues screening; Pesticide detection; detection of toxigenic fungi using molecular markers (DNA); Detection of Food borne pathogens; Multisensing Microsystems integration for food control.

• Expected implications: Developing the new generation of analytical methods based on Micro and Nanotechnology (MST and M&NT) solutions for the safety and quality of food.

Artificial olfactionGOSPEL (General Olfaction and Sensing Projects on a

European Level), NoE in priority 2, IST • Scientific and technological area: Artificial olfaction: Gas

sensor systems realized in MSTechnology; nanostructured sensitive layers; innovative bio-inspired data analysis; integration of electronics with the sensors; microsystem packaging.

• Application domain: Quantitative assessment of gases and odors; Understanding of the biological sense of smell and mimic its relevant functions.

• Expected implications: A landscape of European capability in artificial olfaction; identification of services required by industry, development of the offering and putting in place the necessary legal and organisational structures to implement them. GOSPEL will develop multi-disciplinary approaches to this subject through a comprehensive training and exchange programme.

Non-silicon microtechnologies4M (Material Micro Manufacture: Technologies

and Applications), NoE in priority 3, NMP. • Scientific and technological area: Micro- and

Nano- Technology. • Application domain: New generation of sensors,

actuators and systems for safety and security of people and environment.

• Expected implications: Development of Micro-and Nano-Technology (MNT) for batch-manufacture of micro-components and devices into user-friendly production equipment, processes and manufacturing platforms. 4M will unify the currently fragmented European R&D expertise on non-silicon microtechnologies into a European Centre for MNT process and product development.

Micro- and nanofabricationPATENT-dfmm (Design for Micro & Nano

Manufacture), NoE, in priority 2, IST. • Scientific and technological area: Micro &

Nanosystem Technologies. • Application domain: Micro and nanotechnology

based products. • Expected implications:

Major advances in the performance of communications, transportation and control systems, radical improvements in the accuracy and sensitivity of environmentally sensed data, bio-chemical devices awaited with the potential to improve healthcare and medicine;

solving key challenges in the fields of modeling and simulation, test, reliability and package engineering;

creation of a “Virtual Institute” for Design for Micromanufacture Methodology DfMM research for M&NT based products.

Micro- and nanotechnologies for electronic communications

AMICOM (Advanced MEMS for RF and Millimeter Wave Communications),

NoE in priority 2, IST. • Scientific and technological area: Micro and Nano

Systems. • Application domain: Micro and Nano Systems;

Mobile and Wireless Systems; safety of road.• Expected implications: AMICOM will solve major

technological issues; will develop a generic platform of knowledge to assess smart systems for advanced information and communication applications. The microsystems will feature innovative functionalities, such as circuit redundancy, reconfigurability and power management.

Manipulation at micro- and nanoscale

ASSEMIC (Advanced Methods and Tools for Handling and Assembly in Microtechnology), Training by

Research Network, Marie Curie actions. • Scientific and technological area: Micro-handling and –

assembly: New tools and systems for ultra precision positioning accuracy (micro- and nano-range); Industrial production issues and manufacturability of assembled MEMS.

• Application domain: Assembly of MEMS; biological applications.

• Expected implications: The development of a number of system and tools prototypes for handling and assembly in MST, various micro grippers and a haptic interface device for telemanipulation; enhancement of the quality of European research training in the field of Micro-handling and assembly.

A cluster of “new instrument”-type projects

• The above projects were selected for their connection with certain application domains such as health (Healthy Man), food industry (Good Food), environment and security (GOSPEL), communications (AMICOM), which are connected to priorities and needs of NMS and ACC.

• Moreover, another factor was their connection to new materials in microtechnologies (4M), micro-nano (PATENT), nano-bio (Nano2Life) and micro-nano-bio (ASSEMIC) focus.

• The orientation towards mixed technologies, or converging technologies (see above) will be an important feature of the activity. Extremely representative for this evolution it is the presence in the above cluster of two NoEs from NMP, namely 4M and Nano2Life, whereas two others: Nanofun-Poly and Inside.Pores accepted to be associated to the above cluster. So did also SENSATION, an IP from IST (again micro-nanosystems).

Attractive• The MINOS cluster although created for integration

of NMS and ACC in the field, should be extremely attractive for Western Europe itself. This due to the “leverage” effects in the micro-nanosystems field: materials, processes, structures etc. developed for one application can be successfully used in other applications.

• Therefore, MINOS-EURONET project is providing a kind of “platform” for the exchange of information in micro-nanosystems and related fields). Following the present developments, the focus will be on integrating technologies, typically micro-nano-biotechnologies (we are also speaking about mixing technologies or the convergence of technologies).

Communication platform• A key point of our proposal is the

integration of all existing means of communication (conventional and electronic) in one platform of communication, as shown in the diagram below .“Integrated” means that all means will be used concurrently, in an optimised manner.

• Apart from the databases, the input point in the electronic communication system (ECP) is unique (info exchange, in the e-room region), but the information will be disseminated through all appropriate means of communication.

Exchange of information

• Information introduced in electronic and conventional media should have a versatile format, in order to circulate them using various channels of communication. The appropriate means of communication should be used in each case, e.g. penetrating the usual channels of communication, accessing the usual sources of information for each target group, and each country.

• The networking (exchange of information) is the main objective of this proposal. MINOS-EURONET is starting with an enormous potential for networking at the European scale, and has the adequate means in achieving broad and effective dissemination in a unique pan European “network of networks”. Orientation of activities through the convergence of technologies it is also an ambitious target.