Manual de utilizare pentru

Tastatura LCD si Tastatura LCD pentru acces controlDGP2-641 and DGP2-641AC

Ledul AC:ON = tensiune prezentaOFF = lipsa tensiune alimentare

Ledul STATUS :

Verde:ON = toate zonele sunt inchiseOFF = Zona(e) deschiseFlash = Timp de intarziere

Rosu:ON = Sistem(e) armateOFF = Sistem(e) dezarmateFlash = Alarma

LCD Keypad and Access Control LCD KeypadDGP2-641 and DGP2-641AC

Ecranul LCD va va ghida cu mesaje explicite

Foloseste sagetile pentru navigare si selectie

[CLEAR] = Sterge data curenta sau revine la pasul anterior

[ENTER] = Salveaza data curenta si iese din pasul curent

Armare regulata

Armarea regulat armeaza toate zonele din aria selectata(e)

1. Tasteaza [CUDUL DE ACCES].

3. Daca aveti acces la mai multe arii selectti aria dorita sau apasati [0] petru toate ariile.In cazul cand sunt mai multe arii programate

2. Apasa butonul [ARM].Armeaza aria daca toate zonele sunt inchise.

Armarea fortata- “Force Arming”Armarea fortata permite armare sistemului cu zone deschise. Zonele se programeaza in prealabil

1. Tasteaza [CODUL DE ACCES].

3. Daca aveti acces la mai multe arii, selecteaza aria dorita , sau apasti tasta [0] pentru toate ariile.

2. Tasteaza butonul [FORCE] .Armeaza intreaga arie fara a mai astepta sa se inchida zonele declarate force.

Armarea partiala –”Stay Arming”

“Stay arming” va arma partial sistemul, - doar zonele nedeclarate “stay” (progrmarea se face in prealabil de programator la cerere)

1. Tastati [CODUL DE ACCES].

3. Daca aveti acces la mai multe arii, selecteaza aria dorita, sau apasa tasta [0] pentru toate ariile.

2. Tastati butonul [STAY] .Armeaza doar zonele nedeclarate “stay”,

Armarea Instant

Cu armarea instant,toate zonele vor genera alarma imediat ce se armeaza sistemul(chiar si zonele definite intarziat)

1. Tastati [CODUL DE ACCES].

3. Daca aveti acces la mai multe arii, alegeti aria dorita, sau apasati [0] pentru toate ariile.

2. Tastati butonul [5].Arie armata “stay”, dar alarma se va declansa daca sunt zone deschise (chiar daca sunt definite intarziat)

2. Select the desired area(s).

To disarm when entering:

3. Select the desired area(s).

Disarming

1. Enter your [ACCES CODE].

To disarm from within the perimeter:

1. Enter your [ACCES CODE].

2. Press the [DISARM] button.

5. Repeat steps 3 and 4 until all desired zones selected.

4. Press the [BYP] button once the desired zone appears on the screen.

Bypass Programming

1. Enter your [ACCES CODE].

2. Press the [BYP] button.

3. Use the [] and [] buttons to scroll through the zones.

6. Press [ENTER] to save and exit.

When a zone is bypassed, it will be ignored the next time your system is armed.

4. Introdu numarul zonei(din 2 digiti).

3. Tasteaza butonul [1] pentru a seta zona(ele) chime .

Programare “Chime”

1. Tasteaza [CODUL DE ACCES].

5. Tasteaza butonul [ENTER] pentru a salva.

2. Tasteza butonul [9] .

Tastatura poate fi programatasa emita un sunet(beep) rapid si intermitent de fiecare data cand zona programta este deschisa.

SAUFoloseste butoanele[] si []pentru a selecta zona(ele) si apasa butonul [ACC] pentru a activa sau dezactiva functia “chime”.

6. Tasteaza [CLEAR] pentru a iesi.

4. Enter a start time according to the 24hr clock (9:00 p.m. = 21:00).

5. Enter an end time according to the 24hr click (9:00 p.m. = 21:00).

Programming a Chime Zone Schedule

3. Press the [2] button to set a chime schedule.

Chime zones can also be programmed to chime only when opened between certain hours.

6. Press [CLEAR] to exit.

1. Enter your [ACCES CODE].

2. Press the [9] button.

Alarm Memory Display

“Alarms in Memory [MEM] to View” will appear when an alarm has occurred.

2. Press [CLEAR] to exit.

1. Press the [MEM] button to view the breached zones.

Press and hold the desired one-touch button to access the following:

Button Feature

Table 1: One-touch Buttons

One-Touch Buttons

[BYP] Bypass programming

[ENTER] Regular arm

[5] Instant arm

[6] Keypad settings

[7] View event record display

[STAY] Stay arm

[FORCE] Force arm

[DISARM] Disarm a Stay/InstantArmed area

Panic Buttons

Press and hold one of the button combinations listed below to send a panic alarm.

Panic Alarm Type ButtonCombinations

Table 2: Panic Buttons

Fire Alarm [7] and [9]

Auxiliary Panic (medical) [4] and [6]

Emergency Panic (police) [1] and [3]

Programming User Access Codes – Steps 1 to 6

4. Enter the 3-digit User Number to program.

5. Enter a user code (PIN)

1. Enter your [ACCES CODE].

6. Press the [] button.

3. Press [ACC].

2. Press [0].

Press [] to scroll the user codes and then press [ACC].

OR

9. Enter the number of the area you wish to assign.

Programming User Access Codes – Steps 7 to 9

8. Press the [] button.

7. Press the number(s) of the user option(s) you wish to enable/disable.

Programming User Access Codes – Steps 10 and 11

11. Enter 2-digit schedule.

10. Enter 2-digit access level.

Press the [] button to return to user options; press the [] button to proceed to step 10; press the [ENTER] button to save and exit.

Programming User Access Codes – Steps 12 to 15

14. Enter the access control card’s serial number by either using the keypad’s buttons or by presenting the card to the keypad’s reader.

15. Press [ENTER] to save and exit.

13. Press the [] button.

12. Press the number(s) of the access control option(s) you wish to enable/disable.

Trouble Display

“Trouble(s) [TRBL] to View” will appear when a trouble occurs. To view the trouble display:

Use the [] and [] buttons.

Press the [TRBL] button.

Press the [NUMBER] of the trouble.

Group [1]: System

AC Failure

Battery Trouble

AUX Current Limit

Bell Current Limit

Bell Absent

ROM Check Error

RAM Check Error (DGP-NE96)

Trouble Display – Group [1]: System

Group [2]: Communicator

TLM1

Fail to Communicate 1

Fail to Communicate 2

Fail to Communicate 3

Fail to Communicate 4

Fail to Communicate PC

Trouble Display - Group [2]: Communicator

Group [3]: Modules

Module Tamper

ROM Check Error

TLM Trouble

Fail to Communicate

Printer Trouble

AC Failure

Battery Failure

Supply Output

Trouble Display - Group [3]: Modules

Group [4]: Bus

Missing Keypad

Missing Module

General Failure

Bus Overload

Bus Comm. Error

Group [5]: Zone Tamper

Group [6]: Zone Low Battery

Group [7]: Zone Fault

Group [8]: Clock Loss

Trouble Display - Groups [4] to [8]

Thank You