Lucrari DMD Aprilie 2012

7/28/2019 Lucrari DMD Aprilie 2012

1/12

1

LIST DE LUCRRI

1. Teza de doctorat

DUE, D.M., Contributionsto the dimensional processing through electrical erosion by breakingcontact.University Politehnica from Timisoara, 1991. (190 pages).

2. Cri publicate (C1, C2, etc.), ndrumare publicate (I1, I2 etc.), sisteme de laboratorfuncionale etc. (D1, D2 etc.) prin care se aduc contribuii la asigurarea i perfecionareaactivitilor didactice/profesionale.

Management si evaluare academica

Ca1. Due, D.M. s.a., Organizational Change and Faculty Development, LAP Lambert AcademicPublishing, Saarbrucken, Germany, ISBN-10: 3845418656, ISBN-13: 978-3845418650, 2011

Ca2. DUE, D.M. .a., Human Resource Management, The University Publishing HouseAl.I.Cuza Iai, 2010.

Ca3. DUE, D.M.,Human Resources Management. The University Publishing House, Sibiu, 2007,2nd edition, ISBN 9736513408 (362 pag)

Ca4. DUE, D.M. .a., International CELGAS e-learning postgraduate study system, TheCentral Mining Institute Katowice & Cracow Poland, 2007.

Ca5. DUE, D.M., Educational Management, The University Publishing House Sibiu, Romania,2003, ISBN 973-661-397- 3 (259 pag.)

Ca6. DUE, D.M.,The Management of Human Resource, The University Publishing House, Si biuRomania, 2001 first edition, ISBN973-651-340-8 (341 pag.)

Ca7. DUE, D.M.,Industrial Business Management the Romanian- American CollaborationProgram, the University Publishing House, Sibi u, 1997, ISBN 973-9354-04-(188 pag), Romania.

Ca8. DUE, C.S. and DUE, D.M., The Methods of Teaching Specialities. The UniversityPublishing House, Sibiu, 1997 (227 pag), ISBN 973-9261-88-4

Inginerie industrial

Ca7. DUE, D.M., Modern Processing Technologies of Machines, vol II. The UniversityPublishing House Sibiu, 2007. ISBN 9736517055.

Ca8. DUE, D.M., Methods and techniques of scientific knowledge,The University PublishingHouse Sibiu, 2006. ISBN (10) 973-739-284-1, (429 pag).

Ca9. DUE, D.M., Modern Processing Technologies of Machines, vol I. The UniversityPublishing House Sibiu, 2003. ISBN 973-651-705-5, (384 pag).

Ca10. DUE, D.M., Making Computer Integrates CIM of Cardanic transmissions, TheUniversity Publishing House, Sibiu, 2003, ISBN 973-651 - 609 - 1, (434 pag.).


2/12

2

Ca11. DUE, D.M., Darzu V. Technologies of Processing. The Theoretical bases. The UniversityPublishing House ,Sibiu, 2001. ISBN 973-651-270-3, (146 pag.).

Ca12. DUE, D.M. and Bologa, O., Typified Processing Technologies.The University PublishingHouse, Sibiu, 1995, ISBN 973-95604-6-6, (426 pag.).

Ca13. DUE, D.M. s.a., Optimization of Technological Processes.The University Publishing

House, Sibiu, 1994, ISBN 973-95604-2-5, (135 pag).

ndrumare i culegeri publicate n edituri

Ia1. OPREAN, C., NANU, D. si DUE, D.M.Device design booklet. The University PublishingHouse, 1983. (198 pag.).

Ia2. OPREAN, C., NANU, D. si DUE, D.M. Device design, standardized and normalizedelements. The University Publishing House, 1983. (233 pag.).

Ia3. OPREAN, C., NANU, D. si DUE, D.M.Device design booklet. The University Publishing

House, 1987. (204 pag.).

Ia4. OPREAN, C., NANU, D. si DUE, D.M Device design, standardized and normalizedelements. The University Publishing House, 1987. (233 pag.).

Ia5. STETIU, G., DRZU, V., DUE, D.M. si RADU, V. Machine construction technology,laboratory booklet. The University Publishing House, 1991. (229 pag.).

Ia6. DUE, D.M., BONDREA, I. si MNDRUT, O. Basics for assistet tehnological processdesign, laboratory booklet. The University Publishing House, 1993. (145 pag.).

Ia7. DUE, D.M. siDUE, C.S.Pedagogical practice booklet. The University Publishing House,1997, ISBN 973-9280-36-6 (151 pag.).

3. a) Articole/studii publicate n reviste de circulaie internaional, recunoscute cotate ISI sauindexaten baze de date internaionale specifice domeniului care fac un proces de selecie arevistelor pe baza unor criterii de performan. (Ris)

( Lucrari stiintifice reprezentative )

Management i evaluare academic

Ris1. Due, D.M.Influences of the Organizational Culture on Academic Management Change and

Development in Classical Universities, in The 7th European Conference on Management, Leader-ship and Governance SKEMA Business School, Sophia-Antipolis, France, 2011, index ISIhttp://academic-conferences.org/ecmlg/ecmlg2012/ecmlg12-proceedings.htm

Ris2. Due, D.M. Comparative study on the emotional intelligence in a classical university.in 7thWSEAS International Conference on Engineering Education, Corfu, July 2010, ISBN 978-960-474-202-8, ISSN 1792-426x, index ISI pg.366-372http://www.wseas.us/conferences /2010/corfu/education/ index.html

Ris3. DUE, D.M.Leadership for Classical Universities in an Entrepreneurial or Virtual World,in 6 th European Conference on Management Leadership and Governance, Wroclaw, Polonia oct.2010, ISBN: 978-1-906638-82-5 Book , index ISI, pg. 135-144.http://www.academic-conferences.org /ecmlg/ecmlg2010/ecmlg10 home.htm.
http://academic-conferences.org/ecmlg/ecmlg2012/ecmlg12-proceedings.htmhttp://www.wseas.us/conferences%20/2010/corfu/http://www.wseas.us/conferences%20/2010/corfu/http://www.wseas.us/conferences%20/2010/corfu/http://academic-conferences.org/ecmlg/ecmlg2012/ecmlg12-proceedings.htm


3/12

3

Ris4. DUE, D.M., Specific management for Distance Education (E-learning) 9th EuropeanConference on E-learning Porto 2010, Portugal, index ISI. (pag 664-676)http://www.academic-conferences.org/ecel/ecel2010/ecel10-home.htm

Ris5. DUSE, D.M., s.a Appraisal of the emotional intelligence in the natural gases engineeringeducation, 21th International Conference, Oil-Gas AGH 2010, Poland.

Ris6. DUE, D.M., The Emotional Intelligence in a Technical Faculty. Academics Journal ofManufacturing Engineering, Volume 7, Issue 7/2009

Ris7. DUE, D.M., s.a Quality Assurance of the Natural Gases Engineering Education inRomania, 20th International /conference oil-gas AGH 2009 Krakow , Poland.

Ris8. Duse, D.M., s.a. The Quality of Academic Staff: Appraisal by students versus appraisal of theEmotional Inteligence, in European Society for Engineering Education Sefi 2009, Rotterdam,Holland.

Ris9. DUE, D.M., s.a The Internet and Infantile Pornography, the 7th WSEAS International

Conference on Applied Computer & Applied Computational Science (ACACOS08), Hangyhou,China, 2008, index ISI.

Ris10.DUE, D.M., s.a.Informatics crime, the 7th WSEAS International Conference on AppliedComputer & Applied Computational Science (ACACOS08), Hangyhou, China, 2008, index ISI.

Ris11. DUSE, D.M., s.a The Romanian Higher Education between Opportunities and Limits.International Conference on Engineering Education, Pecs-Budapest, Hungary, 2008

Ris12. DUSE, D.M., s.aEmotional intelligencean important part of the teaching qualification inengineering education, in European Society for Engineering Education SEFI 2008, Rotterdam,

Holland.

Ris13. DUSE, D.M., s.a Organisational culture in a technical faculty predictor of the emotionalintelligence, in EDULEARN 2009, Barcelona, Spain.

Ris14. DUSE, D.M., s.a Influence of Appraising Performance of the Academic Staff onOrganizational Change and Faculty Development, in European Society for Engineering EducationSEFI 2008, Aalborg, Denmark.

Ris15. DUSE, D.M., s.a CELGAS, Conventional and eLearning Gas Engineering Centre, inEuropean Society for Engineering EducationSEFI 2008, Aalborg, Denmark.

Ris16.DUSE, D.M., Organisational Culture in Representative Institutions of an European Capital,5th ISME/WSEAS International Conference on Engineering Education, Heraclion, Greece, 2008,index ISI.

Ris17. DUSE, D.M., Evaluation of Quality Assurance of Engineering Education in Romania, inEuropean Society for Engineering EducationSEFI 2008, Aalborg, Denmark.

Ris18. DUSE, D.M., Engineering Education in a Highly Globalised World, 5th ISME/WSEASInternational Conference on Engineering Education, Heraclion, Greece, 2008, index ISI.

Ris19. DUSE, D.M., Contributions to Quality Assurance of Engineering Education in Romania. 4thBalcan Region Conference on Engineering Education, Sibiu 2007, Romania, index ISI.
http://www.academic-conferences.org/ecel/ecel2010/ecel10-home.htmhttp://www.academic-conferences.org/ecel/ecel2010/ecel10-home.htmhttp://www.academic-conferences.org/ecel/ecel2010/ecel10-home.htm


4/12

4

Ris20. DUSE, D.M., s.a Human Resources management in Leonardo da Vinci project CELGAS eLearning international education initiatives in teaching of Gas Engineering, in 5thWSEAS International Conferences on e-Activities, Venice, Italy, 2006, index ISI.

Ris21. DUSE, D.M., s.a Desirable performances and limits of student appraising in engineeringeducation, 2nd WSEAS International Conferences on Educational Technologies (EDUTE 2006),Bucharest, Romania, index ISI.

Ris22. DUSE, D.M., s.a Organizational Culture Incentive for Academic Staff Development, in 2ndWSEAS International Conferences on Educational Technologies (EDUTE 2006), Bucharest,Romania.

Ris23. DUSE, D.M., s.a Academic Staff Development Through Organisational Culture, inEuropean Society for Engineering EducationSEFI 2006, June, Uppsala Suedia.

Ris24. DUSE, D.M., s.a Organisational Culture of Engineering School through a ClassicalUniversity, in WSEAS 2006, Vougliagmeni, Athens, Greece, July, 2006, index ISI.

Ris25. DUSE, D.M.,Evaluation and Accreditation of the Natural Gases Engineering Curricula atthe "Lucian Blaga "University of Sibiu, Romania, European Society for Engineering EducationSEFI 2005 Ankara, Turkey, ISBN 975-429-236-1 (pag 221-228).

Ris.26. DUSE, D.M., Blended e-Learning International Education Initiatives in Teaching of Gas

Engineering, International Conference ICEE 2005 Gliwice, Poland (pag 312-318).

Ris27. DUSE, D.M., Appraising performance of the academic staff in engineering education

European Society for Engineering EducationSEFI Valencia 2004 (pag.505-511), Spain.

Ris28. DUSE, D.M., The Development of the Organizational and Professional Culture at the

Lucian Blaga University of Sibiu, Romania, 15-th International Scientific Technical Conference,Cracow 2004 (pag.29-39), Poland.

Ris29. DUSE, D.M., Self-assessment of university organizations, 3rd International Seminar onQuality Management in Higher Education, Universitatea Tehnic Iai, Romnia, 2004, index ISI.

Ris30. DUSE, D.M.,Evaluation and Acreditation of Engineering Education in Romania. EuropeanSociety for Engineering EducationSEFI, Porto 2003 (pag. 53-60), Portugal.

Ris31. DUSE, D.M., Considerations for the Future Engineering Education. InternationalConference on Manufacturing Science and Education, Sibiu, Romania, 2003.

Ris32. DUSE, D.M., Evaluation and accreditation of engineering education in Romania, 3rdInternational Conference on the Management of Technological Changes, Tech Univ Crete , Chania,Greece, 2003.

Ris33. DUSE, D.M., The Restructuring of Natural Gases Explanation Activities in Romania, in

the Prospect of Its Integration in the European Union. 17-th World Petroleum Congress, Rio deJaneiro, Brasil 2002.

Ris34. DUSE, D.M., The Organizational Culture of Natural Gas Extraction in Romania. 13-th

International Scientific - Technical Conference "New methods and technologies in petroleum,geology, drilling and reservoir engineering", Cracow, 2002, Poland, Tom l,(pag. 91-99).


5/12

5

Ris35. DUSE D.M. Curriculum Reform for Business-management Programs at "Lucian Blaga"

University of Sibiu, Romania. International Conference on Engineering Education (ICEE 2000),Taipei 2000, Taiwan, ISSN 1562-3580, China Republic. (CD-ROM).

Ris36. DUSE D.M.Evaluation of the Technical Study Programs / Specializations from the Higher

Education in Romania. International Conference on Engineering Education (ICEE'99) Prague 1999,ISSN 1562-3580 (CD-ROM).

Ris37. DUSE D.M. and FRANZ, Ch. Curriculum Reform for Industrial Business ManagementStudy Programs at "Lucian Blaga" University. Tenth Annual Conference of the Alliance ofUniversities for Democracy vol. IX, Budapest 1999 (pag. 133-140).

Ris38. DUSE D.M. The Great Union of 1918, an Important Step in the Development of High

Ethnical Education in Romania. International Scientific Conference: "BEYOND 2000, EngineeringResearch Strategies", the Scientific Bulletin ACTA UNIVERSITATIS CIBINIENSIS vol. XXXVI,technical series, Sibiu, ISSN 1221-4949, 1999 (pag. 15-20).

Ris39. DUSE, D.M. s.a. Studies and Research Regarding the Students Option at the Admission in

the High Technical Education System.. The international Conference "The Involvement ofScientific research in the Development and Modernizing of Manufacturing processes. ACTAUNIVERSITA-TIS CIBINIENSIS, technical series vol. XXIII, Sibiu, ISSN 1221-4949, 1996(pag.37-44).

Ris40. DUSE, D.M. Assessment of Technical Specializations in the Romanian High Education",scientific bulletin ACTA UNIVERSITATIS CIBINIENSIS, vol. XXIII, Sibiu, ISSN 1221-4949,1996 (pag. 25-37).

Ris41. DUSE, D.M. and FRANZ, C. Technical and economic education at the University "LucianBlaga" of Sibiu-Romania. The Sixth Annual Conference and Symposia of the Alliance of

Universities for Democracy, vol.V, Budapest, 1995(pag. 67-70).

Ris42. DUSE, D.M. The Technique and Technical Economic Learning at the "Lucian Blaga"

University of Sibiu. The International Conference the Involvement of Scientific Research in the

Development and Modernizing of Manufacturing Processes, the scientific bulletin ACTAUNIVERSITATIS CIBINIENSIS, vol. XXI, Sibiu, ISSN 1221 -49491995(pag. 152-161).

Ris43. DUSE, D.M. and FRANZ, C. The Romanian-American Program of Cooperation inbusiness-management area, An Active Factor in the Integration of the Technical-economic

Learning at the "Lucian Blaga" University of Sibiu .The International Conference Involvement

in Scientific Research and Modernizing the Manufacturing Processes", the scientific bulletinACTA UNIVERSITATIS CI-BIN1ENSIS, vol. XXI, Sibiu, ISSN 1221-4949 1995(pag. 161-169).

Ris44. DUSE, D.M. s.a .The Advertising Program of the Engineering Faculty in, outcomes and

results. The International Conference: The Involvement of Scientific Research in the

Development and Modernizing of Manufacturing Processes, the scientific bulletin ACTAUNIVERSITATIS CIBINIENSIS, vol. XXI, Sibiu, ISSN 1221-4949, 1995(pag. 169-181).


6/12

6

Inginerie industrial

Ris45. Duse, D. - M. & Pasa, A.: Dental Implant-Abutment Connection Topology FeaInvestigations, Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAMSymposium, ISBN 978-3-901509-83-4, ISSN 1726-9679, pp 1057-1058, Editor B[ranko] Katalinic,Published by DAAAM International, Vienna, Austria 2011,www.daaam.com, index ISI.

Ris46. Duse, D. - M. & Pasa, A.: Dental Implants Mechanical Properties: FEA vs. PhysicalTesting,Annals of DAAAM for 2011 & Proceedings of the 22ndInternational DAAAM Symposium,ISBN 978-3-901509-83-4, ISSN 1726- 9679, pp 1059-1060, Editor B[ranko] Katalinic, Published

by DAAAM International, Vienna, Austria 2011,www.daaam.com, index ISI.

Ris47. Razvan NATANAIL and DUSE, D.M., Lifetime Assessment for Glass-Fiber Reinforced,Plastic Automotive Components, International Conference on Manufacturing Science andEducation- MSE 2011- SIBIU-ROMANIA, index ISI.

Ris48. Razvan NATANAIL , DUSE, D.M., Lifetime Assessment for a Gerp Roof of a Six-Door-

Stretch Limousine,International Conference on Manufacturing Science and Education- MSE 2011-SIBIU-ROMANIA, index ISI.

Ris49. Razvan NATANAIL, DUSE, D.M., Tensile Properties of Glass Fiber Reinforced PlasticModTech International Conference - New face of TMCR Modern Technologies, Quality andInnovation - New face of TMCR, 25-27 May 2011, Vadul lui Voda-Chisinau, Republic of Moldova

Ris50. Razvan NATANAIL , DUSE, D.M., Pulsating Tension Tests on Glass Fiber ReinforcedPlastics, Annals Of DAAAM for 20010 & Proceedings, Vol 9, pag 713, ISSN 1726-9687, ISBN978-3-901509-74-2, index ISI.

Ris51. Razvan NATANAIL , DUSE, D.M., Investigation on Float Glass for AutomobileWindshields, Annals of DAAAM for 2009 & Proceedings, Vol 8, pag 605, ISSN 1726-9679,ISBN 978-3-901509-70, index ISI.

Ris52. DUSE, D.M., Screw Shaped Dental Implants Analysis Tool. Academic Journal ofManufacturing Engineering nr.2/2010.

Ris53. DUSE, D.M., One Piece Production Principle Masters Global Market Challenges, Journalof KONBIN, no. 1 (3) 2007, ISSN 19958281, Warszawa, Poland.

Ris54. DUSE, D.M., Management and Control System for the Electro-discharge Machining withContact Breaking, International Conference on Integrated Engineering C2I, Timisoara, Romania,2005, (pag 139) ISBN 973-625-259-0

Ris55. DUSE, D.M., Contribution to the Design for the Computer-Aided Manufacturing of the

Car Components. The International Journal of Ingenium, Krakow 2005, (pag 154 - 163) ISSN1363-514x,

Ris56. DUSE, D.M.,Research regarding the Processing of Materials in the Process Installations

by Electric Erosion with Contact Break. The National Conference of Equipments, Installations and

Process Engineering, Bucuresti, 2004 (pag 187-193).

Ris57. DUSE, D.M., Contributions to the Management of the Design for the Computer-Aided

Manufacturing of Car Components. COSME 04, Brasov, 2004 (pag.59-61).
http://www.daaam.com/http://www.daaam.com/http://www.daaam.com/http://www.daaam.com/http://www.daaam.com/http://www.daaam.com/http://www.daaam.com/http://www.daaam.com/


7/12

7

Ris58. DUSE, D.M., Avrigean E. Research Concerning the Shape and Dimensional Optimizationof the Cardanic Transmission. Ananals of MteM for 2001& of the 5 th International MTeMSymposium, 4lh-6"' October 2001, Cluj Napoca, (pag.91-194).

Ris59. DUSE, D.M., Avrigean E. Research on the Stress Areas of the Main Shaft of the CardanicTransmission Concerning the Shape and Dimensional Optimization of the Cardanic Transmission,

Ananals of MTeM for 2001& of the 5th

International MTeM symposium, 4lh

-6"' October 2001, Cluj- Napoca, (pag. 191-194).

Ris60. DUSE D.M. Research Regarding the Machinability of Materials through Electro-Discharge Machining. Micro-CAD International Scientific Conference, Section ProductionEngineering, Manufacturing Systems, Miskolc 2001, Hungary (pag.41-46).

Ris61. DUSE, D.M. Scientific Research, a Major Component of the Engineering Faculty in Sibiu.:

the VIIIth International Conference for Technological and Managerial Engineering ,TEHNO'98, vol. I I, Timisoara, ISBN 973-0-00607-5, 1998(pag. 451-459).

Ris62. DUSE, D.M. Research Regarding the Processing by Electric Erosion with Contact Break.(EERC). In AGIR, bulletin year II, nr. 4, Bucuresti, 1997(pag. 59-66).

Ris63. DUSE, D.M. and Cofaru,N.F. Technological Codification of Machine Parts Assisted bythe Computer. The International Conference The Involvement of Scientific Research inDeveloping and Modernizing the Manufactured Processes, The Scientific Bulletin ACTA

UNIVERSITATIS CIBINIENSIS, vol. XXIV, technique series, Sibiu, ISSN 1221-4949 1996(pag. 153-161).

Ris64. DUSE, D.M. and BONDREA, I. The Study by the Method of the Finite Element withElastic Elements Self centered of Bushing Elastic Goffered Type. Proceedings ofthe 3rd NationalConference on Boundary and Finite Element, Constanta, 1995.(pag. 72-77).

Ris65. DUSE, D.M. Experimental Research within the Process of Electro erosive Processing-

data basis. In: The Volume of the VIIth International Conference of Technological andManagerial Engineering. TEHNO '95, Timisoara 1995 (pag. 101-105).

Ris66. DUSE, D.M., BONDREA, I. and SIMION, C. The Study of Temperature Distribution bythe Method of Finite Element in Erosive Debiting of Metallic Materials. Proceedings of the 3rd

National Conference on boundary and finite element, Constanta, 1995. (pag. 72-77).

Ris67. DUSE, D.M., BONDREA, I. and BONDREA, G. Research concerning tin optimization oforientation's elements of self-centering mechanisms structure finite elements. InProceedings ofthe 2nd National Conference on Boundary and Finite Element, Sibiu, 1993 (pag. 125-130).

Ris68. DUSE, D.M., BOLOGA, O. and NATANAIL, C.Applying the Dimensional Analysis to theProcess of Dimensional Processing by Electric Erosion with Contact Break (EERC) (the first part

and the second part): The VIth International Conference of Unconventional Technologies,Timisoara, 1993. (pag. 61-65; 65-69).

Ris69. DUSE, D.M., BOLOGA, O. and BONDREA, I. Contributions to the Optimization of the

Process of Dimensional Processing by Electric Erosion with Contact Break(EERC). The Session of

Scientific Debates Conception, Technology, Management in Mechanical Engineering , Iasi,1992 (pag. 34-39).


8/12

8

Ris70. DUSE, D.M., BONDREA, E and MINDRUT, O. The Assisted Projecting of technologicalProcesses on the Codification of Technological Characteristics. The Scientific Session"Conception, technology and Management in Mechanical Engineering", Iasi, 1992 (pag. 88-93).

Ris71. DUSE, D.M. and BRINDASU, D. Research regarding the Structure of the TechnologicEquipment of Erosive Processing ( the first and second part).: The VIIIth National Conference ofMachine- Tools , Bucuresti, 1991 (pag. 619-622; pag. 623-626).

Ris72. DUSE, D.M. and BONDREA, I. : Assisted Directing Structures of the TechnologicalEquipment for Erosive Processing : The VIII-th National Conference of Machine -Tools, Bucuresti, 1991 (pag. 607-610).

Ris73. DUSE, D.M., DIACONESCU, C. and BOLOGA, O. ExperimentalStand for the Study ofthe Parameters for the Processing Process by Electric Erosion with Contact Break (the first part

and the second one) : The Vl-th Conference of Processes and Equipments for Cold Processing,vol. 11, Timisoara, 1 989 (pag. 1 65-170; pag. 1 71-174).

Ris74. DUSE, D.M., ROSCA, E. and BOLOGA, O. Mathematic Patterning in the Process of

Processing by Electric Erosion with Contact Break. The V-th National Conference ofUnconventional Technologies, Timisoara, 1989. (pag. 114-117).

Ris75. DUSE, D.M., BOLOGA, O. and NATANAIL, C. Research Regarding the Establishing ofProcessing By Electric Erosion with Contact Break: The Vth National Conference ofUnconventional Technologies, Timisoara,1989(pag.110-113)

Ris76. DUSE D.M. and DIACONESCU, C. Research Regarding the Outcome of The ActiveSources, process like, to the Processing by Electric Erosion with Contact Break. . In: The JubileeSession of Scientific Debates, vol. VII, lasi, 1988. (pag. 64-68).

Ris77. DUSE, D.M., TURCU, N., NANU, D. and BIRSAN, I. On the Construction of a Systemfor Orientation, Fixation, Positioning of the semi manufactured at the debiting by Electric erosion

with Contact Break. . In: The Scientific Bulletin U.S. Sibiu, vol. IX, Sibiu, 1987. (pag. 87-92).

Ris78. DUSE, D.M., BRINDASU, D., NANU, D., SUFANA, C. Contributions on the TensionState and Deforming within the Role Bushing. In: The Debated of "Tehnomus" Conference,Suceava, 1985 (pag. 344-350).

Ris79. DUSE, D.M., NANU, D., OPREAN, C. and BOLOGA, O. Stand for the Study of theCharacteristics of Self centered Mechanisms. In: The First Conference of Processing, Control andAssembling Devices, Bucuresti, 1985 (pag. 25-28).

Ris80. DUSE, D.M., DIACONESCU, C., NANU, D., BOLOGA, O. and TURCU, N. ResearchRegarding the Achieving of an Experimental Stand for the Analysis of Processing by Electric

Erosion with Contact break. In: The Scientific Bulletin U.S. Sibiu, vol. VII, Sibiu, 1985. (pag.189-194).

Ris81. DUSE, D.M., ROSCA, E., BIRSAN, I. and NANU, D. the Analysis of the Tension andDeforming within the Elastic Bushing Goffered. In: The Scientific Bulletin U.S. Sibiu, vol. VII,Sibiu, 1985. (pag. 106-110).

Ris82. DUSE, D.M. The Study regarding the Possibility to Check the Tightness and Plane byusing Solex Method, for the Valves of the Hydraulic Damper In: The Scientific Bulletin I.I.SSibiu, vol. IV, Sibiu, 1981 (pag. 189-195).


9/12

9

b) n alte reviste de specialitate de circulaie internaional (Rio)

Rio1. DUSE, D.M., Natural Gases Engineering Education in "Lucian Blaga " UniversitySupported by the Network of Mining, Metallurgy and Petroleum Institutions, 5" European Miningand Metallurgy Academics Rector'sConference Krakow 2005, Conference Digest Poland.

Rio2. DUSE, D.M., The Organizational Culture of the Faculty of Engineering within theClassical University, The 4

th

International Conference on Advanced Manufacturing Technologies,Bucharest, Romania, 2005.

Rio3. DUSE D.M. Appraising Performances of Academic Staff at University "Lucian Blaga" ofSibiu, Romania. Third European Mining and Metallurgy Academic! Rector's Conference, Cracow2000, Conference Digest (pag. 23-43), Poland.

Rio4. DUSE D.M. The Education Reform for Engineering Study Programs at "Lucian Blaga'University of Sibiu, Romania. 5lh World Congress in Engineering Education and Training for 21stCentury Requirements. Polish Federation of Engineering Associations NOT, Warsaw 2000,Conference Proceedings (CD-ROM), Poland.

Proiecte de cercetare dezvoltare-inovare obinute prin competiie pe baz de contract/grant nar (Pn naionale) i internaionale (Pi internaionale), alte lucrari de cercetare dezvoltare(F1, F2 etc.) dup caz.

Pi1. Member of the international contract entitled Improving the Management of Corporate SocialResponsibility through the Promotion of Occupational Safety and Health, nr.720/24.09.2010,value: 10.500 EUR

Pi2. Member of the international research contract entitled Studies and research regarding theergonomy of production system in the automotive industry, nr. 1252/14.04.2010 together with

Kromberg&Schubert ME S.R.L., budget: 11.000 EUR

Pi3.Manager for international contract entitled Dental implant abutments fatigue testing services,nr. 1050/20.04.2010

Pi4. Long term expert in the strategic POSDRU international program entitled Improvinguniversity management"I have created the curricula for the HR module. I participate and sustain teaching activities withmanagers in Romanian universities (rectors, vice rectors, deans, vice deans, scientific secretaries,general managers etc.)

Pi5. Long term expert in the international project POSDRU/88/1.5./S/60370 entitled IntegratingRomanian Research in the Context of European ResearchDoctoral Grants

Pi6.Romanian manager of the international Leonardo da Vinci program entitled Conventional &eLearning Gas Engineering Center (CELGAS PL/04/B/F/PP/-17-4431), 270 374 Euro, value:34.500 EUR (2004-2006).

Pi7. Director contract 120/2006, international program INFOSCO intitulat Structural Research onConception of an Open Flight Simulator for Special Needs

Pi8. "European Institute for Professional Training (EUROFORM - ETI)"; director romn alprogramului internaional Leonardo da Vinci.


10/12

10

Pi9. "Student Mobility in Europe" D/99/2/013088/PL/II.1.2.a/FPJ; director romn al programuluiinternaional Leonardo da Vinci.

Pi10. University Coordinator of the TEMPUS JEP 1351/98 program titled Continuous Educationand Long-Distance Learning

Pi11. "Development and programming of a consultancy and restructuring model in the domain of

industrial business" (1997-2000), director (grant USIA # IA-AENJ-G41-90531).

Pi12. Reform in the university education in the domain of business-management (1994-2000); director(grant USIA # IA-AENJ-G41-90531).

Pi13. Study Program in the domain of business-management (1992-1994); director (grant USIA #IA-AENJ-G41-90531).

Pn1. Regional manager and long term expert in the project POSDRU/90/2.1/S/58108 entitled

Restructuring the productive practice system for students in Technical higher education -TRIPOD, ULBS project value: 2.172.401 RON(2010- present)

Pn2. Occupation or position held Technical manager and long term expert in the projectPOSDRU/105/5.1/G/76281 entitled IMPLICATION+ FORMATION = EMPLOYMENT, projectvalue: 200.000 RON + VAT (2010- present)

Pn3.Technical managerlong term expert in the project POSDRU/39/3.2./G/26581 entitledProfessional Training in the Field of Work Health and Safety (20092011)

Pn4.Informatisation of the design and manufacturing of parts from the machine manufacturing

industry, contract 40541/2003, MECT-CNCSIS (2003-2006).

Pn5. Computer-aided Modelling and Simulation of Integrated Production Systems, Grant no.39696/1998, MEN-CNFIS (1998-2001).

Pn6. Computer-aided Constructive and Technological Design for the Manufacturing of CardanTransmissions, contract 1309/96(B1), ANSTI 1999 (1996-1999);

Pn7.Researches regarding the implementation of technologies for processing by electro-discharge

machining with contact breaking (EDMCB), contract 1309/96(A1), ANSTI (1996-1999);

Pn8. Technical-economic model for the renewal of local industrial technologies, contract 1301/96ANSTI 1996;

Pn9. Contract nr. 3032/C3/1994. Optimizing manufacturing technologies for medical implants.Ministry of Education, Department for Superior Education and University Scientific Research.Conf. dr-ing. Dan-Maniu Duse.

Pn10. Contract nr.3032/B2/1993-1996. Computerizing the design and fabrication of automobilecomponents, Ministry of Education, Department for Superior Education and University Scientific

Research. Conf. dr-ing. Dan-Maniu Duse.

Pn11. Contract nr. 2/1991. Study of methods and applicability domains for cold rotating volume

deformation processing of metals, Ministry of Education and Science, Science Department. Conf.dr.ing. Bologa Octavian.

Pn12. Contract nr. 6/1988. Implementing the steering through the Z80 microprocessor of high


11/12

11

alloyed steel processing through electrical erosion by breaking contact, Independenta, Sibiu. Conf.dr-ing. Bologa Octavian, sef lucrari ing. Duse Dan-Maniu.

Pn13. Contract nr. 7/1988. Computer aided design of specificS.D.V.s at I.P.A. Sibiu. Conf. dr. ing.Oprean Constantin, conf. dr-ing. Brndasu Dan.

Pn14. Contract nr. 13/1986.Automation of debiting casted pipes at the Metallurgical Factory Aiud.

Conf. dr-ing. Nanu Dan, sef lucrari ing. Duse Dan-Maniu.

Pn15. Contract nr. 3/1985. Experimental research to set the regimes for processing throughelectrical erosion with thread-like electrode of metal carbides, I.P.A. Sibiu. Conf. dr.ing. OpreanConstantin.

Pn16. Contract nr. 2/1985.Designing profiled disk mills and plate smoothening installation, toincrease productivity at Mecanica Sibiu. Conf. dr.ing. Brndasu Dan.

Pn17. Contract nr. 12/1983. Processing through vibro-drawing of small scale pieces, Flaro Sibiu.Conf. dr-ing. Bologa Octavian.

Pn18. Contract nr. 6/1994. Studies and research for applying feeders and casting networks forelectrical erosion through breaking contact at Independea Sibiu, Independenta Sibiu. Conf. dr. ing.

Nanu Dan, sef lucrari ing. Duse Dan-Maniu.

Pn19. Contract nr. 1/1984. Studies and experimental research for increasing knife durabilitythrough plasma nitriding and replacing some poor alloyed steels, Balanta Sibiu.Prof. dr-ing. DeacValeriu.

Pn20. Contract nr. 4/1982.Technological process applicable for the guiding blade for the cuttingchain for the RETEZAT chainsaw, in order to follow adhesion, I.U.P.S. Sibiu. Prof. dr-ing. Deac

Valeriu.

Pn21. Contract nr. 7/1983. Study, design and realization of industrial installations for debitingthrough electrical erosion by breaking contact, of casted pieces, Metallurgical Factory Aiud. Conf.dr-ing. Nanu Dan.

Alte proiecte de cercetare-dezvoltare-inovare n calitate de responsabil de proiect

F1. DUSE, D.M. Stand for determining the characteristics of traps with elastic elements andcomparators with dial. University of Sibiu, 1990-1991.

F2. DUSE, D.M. Stand for determining the characteristics of traps with electric resistivetransducers. University of Sibiu, 1990-1991.

F3. DUSE, D.M. Stand for microprocessor managing dimensional processing through electricalerosion by breaking contact.I.I.S. Sibiu, 1988-1989.

F4. DUSE, D.M. si DIACONESCU, C. Stand for studying the parameters of the process ofelectrical erosion by breaking contact.I.I.S. Sibiu, 1987-1988.

F5. DUSE, D.M.Experimental stand for studying in a static and dynamic regime the rigidity and

the orientation and fixation errors of autocentering mechanisms (elastic bushings, corrugatedelastic bushing, mechanisms with hidroplast). I.I.S. Sibiu, 1986-1987.

F6. DUSE, D.M. Stand for studying semi-product fixation and orientation schemes. I.I.S. Sibiu,


12/12

12

1985.

F7. DUSE, D.M. Stand for studying characteristics of manually acted part fixation devices withlock mechanism.I.I.S. Sibiu, 1985.

F8. DUSE, D.M.Experimental stand for studying technological parameters of processing throughelectrical erosion by breaking contact. I.I.S. Sibiu, 1984.

F9. DUSE, D.M. Stand for determining fixation and orientation characteristics of adjustable,universal chucks, with multiple wedges and radial gliding jaws. I.I.S. Sibiu, 1984.

F10. DUSE, D.M. Stand for determining the characteristics of fixation mechanisms with circulareccentrics. I.I.S. Sibiu, 1983.

F11. DUSE, D.M. Stand for determining fixation errors for orientation elements of the typeorientation pins. I.I.S. Sibiu, 1982.

F12. DUSE, D.M. Stand for determining tightening forces, at manual acting, for mechanisms with

thread and wedge and plunger in a console. I.I.S. Sibiu, 1980.

F13. DUSE, D.M. Test bed for controlling elastic characteristics of oscillating arms. AutomobileParts Factory, Sibiu, 1979.

F14. DUSE, D.M.Pneumatic calibration devices for passive control of shafts an smooth cylindricalbores, using Superjet measuring equipment. Automobile Parts Factory, Sibiu, 1979.

F15. DUSE, D.M. Buffers, rings and pneumatically adjustable horseshoes for the Millipneumeasuring equipment. Automobile Parts Factory, Sibiu, 1978.

F16. DUSE, D.M. Individual control technology and measuring charts for breaking equipments. Automobile Parts Factory, Sibiu, 1979.

F17. TURCU, N. si DUSE, D.M. Individual control technology and measuring charts for cardanjoints. Automobile Parts Factory, Sibiu, 1978.

F18. DUSE, D.M.si TURCU, N.Individual control technology and measuring charts for hydraulicshock dampeners. Automobile Parts Factory, Sibiu, 1978.

F19. MURESAN, I. si DUSE, D.M. Individual control technology and measuring charts forhydraulic and mechanical steering. Automobile Parts Factory, Sibiu, 1977.

Prof.univ.dr.ing. Dan Maniu DUE

Sibiu, 16 aprilie 2012

Lucrari DMD Aprilie 2012

Documents

Transcript of Lucrari DMD Aprilie 2012