Europass Curriculum Vitae - cmpcvb.ro · Universitatea Politehnica din Bucuresti, Facultatea...

/34 - Curriculum vitae Semenescu Augustin

Europass Curriculum Vitae

Informaţii personale

Nume / Prenume Semenescu / Augustin

Adrese Bucharest, ROMANIA

Telefon

Fax

E-mail

Nationality

Data naşterii

Sex

Locul de muncă

M

Universitatea Politehnica din Bucuresti, Facultatea Stiinta si Ingineria Materialelor si Facultatea de Inginerie in Limbi Straine, Romania - 313 Splaiul Independentei, sect.6, 060042 - Bucuresti – Romania - www.pub.ro

Domeniul ocupaţional Universitar- Profesor UniversitarHabilitat (conducator de doctorat)

Experienţa profesională

Perioada 1.Octombrie 2009 prezent 2. 2007-2008 3.1997 -2007 4. 1997 – 1993 5. 1993 – 1990 6. 1990 - 1984 7. 2005-2000 8. 2006-2003


Funcţia sau postul ocupat 1. Profesor universitar Dr. Ing. Ec. Mat. 2. National Expert for the European Commission-Research Directorate-General -Research Fund for Coal and Steel http://www.cordis.lu/coal-steel-rtd/home.html; http://fp6.cordis.lu/fp6/home.cfm 3. Conferentiar universitar Dr. Ing. 4 Sef lucrari universitar Dr. Ing. 5. Asistent universitar Ing. 6 Inginer proiectant 7. Director adjunct «International Cooperation» 8. National Contact Point for SMEs-FP6-European Commission

Activităţi şi responsabilităţi principale

1. Activități de educație pentru invatamantul superior (bachelor si master). Activitate de proiectare si cercetare științifică si dezvoltare, inovare în domeniile ingineria proceselor metalurgice, politica științei. Expertiza tehnica in domeniul echipamentelor si instalatiilor metalurgice. 2. Management of Coal and Steel Scientific Projects- European Commission-Research Directorate-General -Research Fund for Coal and Steel

http://www.cordis.lu/coal-steel-rtd/home.html; http://fp6.cordis.lu/fp6/home.cfm

3. Activități de educație pentru invatamantul superior (bachelor si master).. Activitate de proiectare si cercetare științifică si dezvoltare, inovare în domeniile ingineria proceselor metalurgice, politica științei

4. Activități de educație pentru invatamantul superior (bachelor si master). Activitate de proiectare si cercetare științifică si dezvoltare, inovare în domeniile ingineria proceselor metalurgice, politica științei

5. Activitate de coordonare proiecte de cercetare, dezvoltare, inovare. Activitate de proiectare si cercetare științifică în domeniile ingineria proceselor metalurgice, politica științei

6. Proiectare, cercetare, dezvoltare, inovare

7. Management si marketing a activitatilor de inovare si transfer tehnologic

8. Dezvoltarea de parteneriate între universități naționale și transnaționale

Numele şi adresa angajatorului 1. Universitatea Politehnica din Bucuresti, Facultatea Stiinta si Ingineria Materialelor si Facultatea de Inginerie in Limbi Straine, Romania - 313 Splaiul Independentei, sect.6, 060042 - Bucuresti – Romania - www.pub.ro 2. European Commission-Research Directorate-General -Research Fund for Coal and Steel, Bruxelles, Belgia

http://www.cordis.lu/coal-steel-rtd/home.html; http://fp6.cordis.lu/fp6/home.cfm 3. Universitatea Politehnica din Bucuresti, Facultatea Stiinta si Ingineria Materialelor si Facultatea de Inginerie in Limbi Straine, Romania - 313 Splaiul Independentei, sect.6, 060042 - Bucuresti – Romania - www.pub.ro 4. Universitatea Politehnica din Bucuresti, Facultatea Stiinta si Ingineria Materialelor si Facultatea de Inginerie in Limbi Straine, Romania - 313 Splaiul Independentei, sect.6, 060042 - Bucuresti – Romania - www.pub.ro 5. Universitatea Politehnica din Bucuresti, Facultatea Stiinta si Ingineria Materialelor si Facultatea de Inginerie in Limbi Straine, Romania - 313 Splaiul Independentei, sect.6, 060042 - Bucuresti – Romania - www.pub.ro 6. Institutul National de Proiectare de Sectii si Uzine Metalurgice IPROMET SA – Bd. Constructorilor, 20, sect.6, Bucuresti, Romania - www.ipromet.ro

7. Agentia Manageriala pentru Cercetare Stiintifica,, Inovare si Transfer Technologic Politehnica -AMCSIT Politehnica (Agentie Guvernamentala) - Splaiul Independentei 313, Rectorat, R 102, R 103, AN 033, sect.6, 060042 - Bucharest - Romania – www.amcsit.ro 8. National Contact Point for SMEs-FP6-European Commission

Tipul activităţii sau sectorul de activitate

1. Universitatea Politehnica din Bucuresti, 2. - European Commission-Research Directorate-General -Research Fund for Coal and Steel http://www.cordis.lu/coal-steel-rtd/home.html; http://fp6.cordis.lu/fp6/home.cfm 3. Universitatea Politehnica din Bucuresti, 4. Universitatea Politehnica din Bucuresti, 5. Universitatea Politehnica din Bucuresti, 6. Institutul National de Proiectare de Sectii si Uzine Metalurgice IPROMET SA 7. AMCSIT - POLITEHNICA este o institutie publica subordonata Ministerului Educatiei si Cercetarii (HG. 983/1999) 8. European Commission

http://www.pub.ro/


Educaţie şi formare

Perioada 1.Oct 2006 - Iul.2009 2.Oct.2005 - Feb.2008 3.Nov. 1990 - Iunie 1995 4. Sept.1994 - Sept.1992 5.Iul. 1984-Sept 1979 6. 22.09-26.09.1997 7. 14-18.09.2000

Calificarea / diploma obţinută 1. Matematician-Informatician 2. Economist 3. Doctor in stiinte tehnice 4. --- 5. Inginer 6. Absolvent 7. Absolvent

Disciplinele principale studiate / competenţe profesionale

dobândite

1. Lucrarea de licenta: Siruri de numere-Aplicatii siruri Fibbonnaci.Programe de calcul a limitelor de siruri ( C, TP) 2. Lucrarea de licenta:Bursa Romana de Marfuri;Indicatori, instrumente financiare si aplicatii client (Java, .Net Framework and PHP) 3. Titlul tezei de doctorat: ”Complex control and mathematical modeling of ring-type baking furnaces” 4. Automatizari si Calculatoare 5. Competențe tehnice de inginerie metalurgică și de proiectare de Agregate si Instalatii Tehnologice 6. Competențe tehnice pentru studii de impact şi bilanţuri de mediu 7. Competențe tehnice pentru realizare de proiecte FP 6

Numele şi tipul instituţiei de învăţământ / furnizorului de

formare

1.Facultatea de Matematica - Informatica, UH, ROMANIA

2. Facultatea de Finante si Banci, URSA GC, ROMANIA

3. Facultatea de Stiinta si Ingineria Materialelor, Universitatea Politehnica din Bucuresti, ROMANIA

4. Facultatea de Automatica si Calculatoare, Universitatea Politehnica din Bucuresti, ROMANIA

5. Facultatea Metalurgie, Institutul Politehnic din Bucuresti, ROMANIA (dupa 1989 Universitatea Politehnica din Bucuresti, ROMANIA) 6. ICIM-Bucureşti şi CECPT-Bucureşti - curs de “Elaborator de studii de impact şi bilanţuri de mediu” 7. EARMA (European Association of Research Managers, and Administrators), cursurile intitulate How to Write a Competitive Proposal for the 5-th Framework Programme si How to negiciate, Administer, Manage, and Finish an EU R&D Contract (From Proposal to the final Payment), Bruxelles, Belgia

Nivelul în clasificarea naţională sau internaţională

ISCED 5

ISCED 5

ISCED 6

ISCED 5

ISCED 5

Aptitudini şi competenţe personale

Limbi materne Romana


Limbi străine cunoscute

Autoevaluare Înţelegere Vorbire Scriere

Nivel european (*) Ascultare Citire Participare la

conversaţie Discurs oral Exprimare scrisă

Limba engleză C1 Proficient user C2 Proficient user C1 Proficient user C1 Proficient user C2 Proficient user

Limba franceză C1 Proficient user C2 Proficient user C1 Proficient user C1 Proficient user C2 Proficient user

(*) Nivelul Cadrului European Comun de Referinţă Pentru Limbi Străine

Competenţe şi abilităţi sociale Capacitate de exprimare orală, abilități interpersonale, ușurință în a stabili contacte interpersonale, sociabilitate, comunicativitate, flexibilitate interpersonală.

Capacitate de organizare, capacitate de planificare, capacitatea de mobilizare a altora, capacitate de a prelua conducerea, capacitate de impunere în fața celorlalți, capacitate de argumentare. Experiență în coordonarea proiectelor de 30 ani (IPROMET SA,UPB, AMCSIT Politehnica), în management administrativ de 10 ani (IPROMET SA, AMCSIT Politehnica)

Competenţe şi aptitudini organizatorice

Capacitate de inovare și invățare, raționament logic, capacitate de analiză strategică, capacitate de sinteză, gândire tehnică, reprezentare spatială, raționament matematic, abilități de calcul, raționament analogic, capacitate de abstractizare, memorie numerică, memorie vizuală și verbal

Expert European - Political line in the field of „Human Resource Mobility” in the “Working group on Intersectorial Mobility: Knowledge and skills development”. ( 2 june 2005, 29 september 2005, Bruxelles DG Research, CDMA Building, Room SDR3, Rue du Champs de Mars, N°21, B-1049);

Consultant Public (The IPM reference number is: 363179718591130705) in ‘on whether and how to create a European Institute of Technology (EIT) opened by the European Commission ‘(16 sept. 2005 - It gathered the views of stakeholders on how an ‘EIT’ could strengthen research, education and market innovation in Europe http://europa.eu.int/yourvoice/ipm/forms/dispatch?form=EIT, http://europa.eu.int/comm/education/eit/index_en.html.).

http://europass.cedefop.europa.eu/LanguageSelfAssessmentGrid/ro

http://europa.eu.int/comm/education/eit/index_en.html


Competenţe şi aptitudini tehnice

Am participat la urmatoarele stagii de pregatire si dezvoltare a competentelor si aptitudinilor tehnice:

•Stagiu la Manchester, Anglia, pentru a participa la workshop-urile: “Writing International Proposals”, “Working with American Bussines, Research Collaboration” si “Submitting your Proposal Electronicaly” organizate în cadrul conferinţei “International Research Funding und the Use of Electronic Tools”, 22-24.10.2000.

•Stagiu de pregatire la cursurile NATO ADVANCED RESEARCH WORKSHOP„Overcoming Barriers to

Technology Transfer and Business Commercialization in Central and Eastern Europe: Solutions and

Opportunities”,24th-25thSeptember 2001, Best Western Park Hotel, Bucharest, Romania.

•Stagiu de pregatire la cursurile EARMA (European Association of Research Managers, and Administrators), intitulate:” Managing Research Today -The influence of the European Research Area ERA, EC Framework Programme 6 and global participation opportunities show the significance of the role of Research Managers and Administrators in this complex environment”, Cluj 27 September 2001,Brasov 2 October 2001, Romania. •Stagiu de pregatire la cursul de instruire” Documentarea si implementarea sistemului de management al calitatii la AMCSIT-Politehnica in concordanta cu prevederile SR EN ISO 9001/2001”, Bucuresti, 21-23.10.2002. •Stagiu de pregatire la cursul: “How to apply with success in the Framework Programme 6”, organizat de: Ministry of Education and Research (MEC, http://www.mct.ro) and General Direction for European Integration and International Relationship , National University Research Council (NURC), Romanian Association of Managers and Administrators (RARMA http://www.rarma.ro ), Bucharest, Romania, 11-12 March 2003, lecturer Dr. Sean McCarthy-Hypertion Ltd Ireland, European Association of Managers and Administrators (EARMA), & European Association of Research and Technology Organisations (EARTO). Specialist cu realizări deosebite în domeniul cercetării şi proiectării instalaţiilor metalurgice şi a sistemelor de ardere aferente acestora ( ACAD, IDEAS ) al dezvoltarii de arzatoare regenerative cu eficienţă ridicată şi emisii reduse de produse poluante, al modelarii matematice şi optimizarii proceselor termo-gazo-dinamice şi chimice complexe din industria metalurgică şi a materialelor noi ( FLUID, THERMOCALC ), cat si in domeniul multidisciplinar al tehnologiilor informatice in controlul inteligent si inspectia de calitate a produselor metalurgice cu rezultate bazate pe cercetari privind interactiunea factorilor constructivi si functionali ai echipamentelor si instalatiilor specifice cu factori tehnologici la procesarea metalurgica, cercetari privind conducerea asistata de calculator a sistemelor de fabricatie metalurgica.

Am peste 50 brevete de invenţie aflate in baze de date internaţionale - Derwent Innovations Index

(https://worldwide.espacenet.com/searchResults?search=augustin%20semenescu&DB=EPODOC&submitted=true&locale=en_EP&ST=singleline&compact=false&DB=EPODOC&query=augustin%20semenescu)

Am peste 60 articole ISI, citate in reviste cotate ISI (www.isiknowledge.com) si alte baze de date internationale. (http://apps.webofknowledge.com/Search.do?product=WOS&SID=V2pSIkIVduHNW2EO3vG&search_mode=GeneralSearch&prID=fc72921c-94ce-42cf-9536-c59dcbc61b8a)

Competenţe şi aptitudini de utilizare a calculatorului

Preocupari stiintifice in domeniul instruirii asistate de calculator (Windows,TurboPASCAL, C, MathCAD, Office) şi dezvoltare de pachete de programe educaţionale.

Competenţe şi aptitudini artistice

Pasionat de arta

Alte competenţe şi aptitudini - Consilier editorial – carte tehnică şi ştiinţifică (Atestat Ministerul Culturii nr. 4440/9.09.1997).

Permis de conducere B, din1990

http://www.mct.ro/

http://www.rarma.ro/

https://worldwide.espacenet.com/searchResults?search=augustin%20semenescu&DB=EPODOC&submitted=true&locale=en_EP&ST=singleline&compact=false&DB=EPODOC&query=augustin%20semenescu

https://worldwide.espacenet.com/searchResults?search=augustin%20semenescu&DB=EPODOC&submitted=true&locale=en_EP&ST=singleline&compact=false&DB=EPODOC&query=augustin%20semenescu

http://www.isiknowledge.com/

http://apps.webofknowledge.com/Search.do?product=WOS&SID=V2pSIkIVduHNW2EO3vG&search_mode=GeneralSearch&prID=fc72921c-94ce-42cf-9536-c59dcbc61b8a

http://apps.webofknowledge.com/Search.do?product=WOS&SID=V2pSIkIVduHNW2EO3vG&search_mode=GeneralSearch&prID=fc72921c-94ce-42cf-9536-c59dcbc61b8a


Informaţii suplimentare

- membru ASM International (American Society of Materials) (din 1992) - membru fondator SRM (Romanian Society of Metallurgy) - membru EARMA(European Association of Research and Management Administrators)( since 2000 ) - membru METALURGIA Romania (Romanian Metallurgical Revue) (since 1996); - vice-president of PROINVENT (Romanian Inventors Association) (1997, 1999); - membru SMR (Romanian Society of Mathematics) (since 1999 ); - membru SRB (Romanian Society of Biomaterials) (since 2002 ); - membru SRBI (Romanian Society of Bio-Informatics (since 2002 ); - membru Deutsche Gesellschaft fuer Materialkunde eV( http://www.materialsclub.com) - Evaluator RELANSIN -Programul National de CD– Relansarea Industriei prin Inovare (nov.1999, mar.2000, nov.2000, feb.2001, feb. 2002). - Evaluator MATNANTECH – Programul National de CD Materiale si Technologii Noi ( sept. 2001, feb. 2002.)

Ordine și Medalii Internaționale

EUROPEAN Innovation Awards (2015)- - OFFICER - Finis coronat opus, Mr. SEMENESCU Augustin, Professor, University Politehnica of Bucharest, Romania. No. of the Cross 15113, Brussels, 20-th November, 2015.

EUROPEAN Innovation Awards (2016)- - GRAND OFFICER - Finis coronat opus, Mr. SEMENESCU Augustin, Professor, University Politehnica of Bucharest, Romania. No. of the Cross 19620, Brussels, 18-th November, 2016.

Persoane de contact:

- Prof. Dr. Ing. Hadăr Anton, Universitatea POLITEHNICA din Bucuresti – SPLAIUL INDEPENDENTEI nr.

313, Bucuresti, Romania, , tel. +4-021.22114937; fax: +4-021.4029393, mobil: 0722 554911 e-mail: [email protected] , [email protected]

- Prof. Dr. Habil.Ing. Antoniac Vasile Iulian, Universitatea POLITEHNICA din Bucuresti – SPLAIUL INDEPENDENTEI nr. 313, Bucuresti, Romania, , tel. +4-021.402 9595, fax: +4-021.318 101 17, mobil: 0745 206 509, e-mail: [email protected], [email protected], [email protected]

http://www.materialsclub.com/

mailto:[email protected]






Universitatea Politehnica Bucureşti,

Data: 9 Nov. 2017

Facultatea: Ştiinţa şi Ingineria Materialelor, Catedra: Ingineria şi Managementul Obţinerii Materialelor Metalice,

L I S T A D E L U C R Ă R I

SEMENESCU V. AUGUSTIN – Prof.Univ.Dr.M.Ec.Ing.

1.

TEZA DE HABILITARE

“CONTRIBUTION TO INCREASING INSTITUTIONAL PERFORMANCE BY IMPLEMENTING ACADEMIC ENTREPRENEURSHIP” Domeniul de studii universitare de doctorat:INGINERIE SI MANAGEMENT (ȋn care s-a conferit calitatea de conducător de doctorat, conform Ordinului de Ministru nr.5121 din 28.092017), COMISIA DE ABILITARE -Prof.Univ.Dr.Ing. Ion ABRUDAN-Presedinte, Prof.Univ.Habil.Dr.Ing. Constantin BUNGĂU- Membru, Prof.Univ.Dr.Ing..Constantin OPREAN- Membru

TEZA DE DOCTORAT “CERCETARI PRIVIND CONDUCEREA COMPLEXA A INSTALATIILOR DE COACERE A PRODUSELOR CARBONICE”, Universitatea Politehnica Bucureşti, coordonator ştiinţific Prof.dr.ing. Iulian Oprescu, susţinută în şedinţă publică în 02.05.1996, titlul de doctor în septembrie 1996 20 CĂRŢI PUBLICATE (C) Ci - Cărţi publicate în edituri internationale :

Ci1 Adrian Ioana, AUGUSTIN SEMENESCU and Mihnea Costoiu -Research and Development Evolving Trends and Practices - Towards Human, Institutional and Economic Sectors Growth (ISBN 978-953-51-5329-0)- Chapter title: RESEARCH AND

DEVELOPMENT ABOUT METALLURGICAL INDUSTRY OF ROMANIA, Publisher: InTech ( World’s largest Science, Technology &

Medicine Open Access book publisher. Publish, read & share novel research), under CC BY 3.0 license, Edited Volume

Ci2 Adrian Ioana, AUGUSTIN SEMENESCU - Greenhouse Gases - Selected Case Studies ,.Chapter title: ABOUT ENVIRONMENT-RECYCLING-ENERGY (ERE) CONCEPT IN STEEL INDUSTRY OF ROMANIA, Edited by Andrew J. Manning, ISBN 978-953-51-2683-6,

Print ISBN 978-953-51-2682-9, 88 pages, Publisher: InTech ( World’s largest Science, Technology & Medicine Open Access book

publisher. Publish, read & share novel research), Chapters published September 21, 2016 under CC BY 3.0 license, DOI: 10.5772/61589, Edited Volume, https://www.intechopen.com/books/greenhouse-gases-selected-case-studies

Ca - Cărţi cursuri (manuale) publicate în edituri recunoscute :

Ca1. AUGUSTIN SEMENESCU, Ioana, A., Marcu, D., Marketing – Teorie şi Aplicaţii, Editura Matrix Rom, ISBN 978-606-25-0115-0, Bucureşti,

157 pag., 2014. Ca2. Costoiu, M., AUGUSTIN SEMENESCU., Ioana, A., Marcu, D., Doctrine Economice, Editura Matrix Rom, ISBN 978-606-25-0122-8,

Bucureşti, 331 pag., 2014. Ca3. Costoiu, M., Marcu, D., AUGUSTIN SEMENESCU. Ioana, A., Bogdan, O., Legislaţie Comercială. Teorie şi speţe, Editura Matrix Rom,

ISBN 978-606-25-0123-5, Bucureşti, 221 pag., 2014 Ca4. Adrian IOANA., AUGUSTIN SEMENESCU , Dragos Florin MARCU, Alexandru GHIBAN, Alina Nicoleta COLAN, -„MANAGEMENTUL

CALITĂȚII. TEORIE ŞI APLICAȚII” Editura Matrix Rom, Bucureşti, ISBN 978-973-755-894-7, 318 pg, 2013 Ca5. Adrian IOANA., AUGUSTIN SEMENESCU ,Cezar Florin PREDA, „MANAGEMENT STRATEGIC. TEORIE ŞI APLICAŢII”. Editura Matrix

Rom, Bucureşti, ISBN 978-973-755-8268, 204 pg, Bucureşti, 2012.

http://creativecommons.org/licenses/by/3.0/

https://www.intechopen.com/books/editor/greenhouse-gases-selected-case-studies

http://creativecommons.org/licenses/by/3.0/

https://www.intechopen.com/books/greenhouse-gases-selected-case-studies


Ca6. Adrian IOANA., AUGUSTIN SEMENESCU ,Cezar Florin PREDA,Dragos Florin MARCU, Oana BOGDAN – „LEGISLAŢIA MUNCII. TEORIE ŞI APLICAŢII”, Editura Matrix Rom, Bucureşti, ISBN 978-973-755-798-8, 361 pg, Bucureşti, 2012.

Ca7. Adrian IOANA., AUGUSTIN SEMENESCU Cezar Florin PREDA,Dragos Florin MARCU- „BAZELE MANANAGEMENTULUI. TEORIE ŞI APLICAŢII”, Ediţia a II-a revizuită şi îmbunătăţită, Editura Matrix Rom, Bucureşti, ISBN 978-973-755-761-2, 342 pg, Bucureşti, 2012.

Ca8. AUGUSTIN SEMENESCU,Adrian IOANA, Cezar Florin PREDA,Dragos Florin MARCU, “LEGISLAŢIA MEDIULUI. TEORIE ŞI APLICAŢII”, Editura Matrix Rom, Bucureşti, ISBN 978-973-755-774-2, 321 pg, Bucureşti, 2012

Ca9. Iulian OPRESCU, AUGUSTIN SEMENESCU, George Adrian Voicu –„TRATAT- CONDUCERE AUTOMATĂ A ECHIPAMENTELOR ŞI INSTALATIILOR METALURGICE , Ed. MATRIX-ROM, Bucuresti, 2011, ISBN 978-973-755-655-4, ISBN 978-973-755-700-1, 590 pag.

Ca10. Adrian IOANA, AUGUSTIN SEMENESCU , Dragoş MARCU, BAZELE MANAGEMENTULUI, Ed. MATRIX-ROM, Bucuresti, 2011, ISBN-978-973-755-761-2, 251 pagini

Ca11. Cezar Florin Preda, AUGUSTIN SEMENESCU, Dragos Florin Marcu , --"LEGISLATIE ECONOMICA" -, Editura MATRIXROM, Bucuresti, 2011, ISBN 978-973-755-670-7, 293 pag.

Ca12. Iulian OPRESCU, Augustin SEMENESCU, Vasile GROSU, Ioan VÎRCOLACU, Cezar Florenţ BĂLESCU, Vasile MIREA, Cezar Florin PREDA –„TRATAT-ECHIPAMENTE AUGUSTIN SEMENESCU, Iulian OPRESCU, Andrei Ioan Mauthner –„TRATAT-PROIECTAREA UZINELOR SI INSTALATIILOR METALURGICE , Ed. MATRIX-ROM, Bucuresti, 2011, ISBN ISBN 978-973-755-724-7, 417 pag.

Ca13. Iulian OPRESCU, AUGUSTIN SEMENESCU, Vasile GROSU, Ioan VÎRCOLACU, Cezar Florenţ BĂLESCU, Vasile MIREA, Cezar Florin PREDA –„TRATAT-ECHIPAMENTE METALURGICE TEHNOLOGICE ŞI DE CONDUCERE AUTOMATĂ, VOLUMUL I, ECHIPAMENTE PRINCIPALE (DE BAZĂ)” , Ed. MATRIX-ROM, Bucuresti, 2010, ISBN 978-973-755-655-4, ISBN 978-973-755-654-7,447 pag.

Ca14. METALURGICE TEHNOLOGICE ŞI DE CONDUCERE AUTOMATĂ, VOLUMUL II, ECHIPAMENTE AUXILIARE DIN INDUSTRIA METALURGICĂ” , Ed. MATRIX-ROM, Bucuresti, 2010, ISBN ISBN 978-973-755-655-4, ISBN 978-973-755-654-7, 583 pag.

Ca15. Iulian OPRESCU, Augustin SEMENESCU, Vasile GROSU, Ioan VÎRCOLACU, Cezar Florenţ BĂLESCU, Vasile MIREA, Cezar Florin PREDA –„TRATAT-ECHIPAMENTE METALURGICE TEHNOLOGICE ŞI DE CONDUCERE AUTOMATĂ, VOLUMUL III, ECHIPAMENTE DE CONDUCERE AUTOMATĂ A PROCESELOR ŞI INSTALAŢIILOR METALURGICE” , Ed. MATRIX-ROM, Bucuresti, 2010, ISBN ISBN 978-973-755-655-4, ISBN 978-973-755-654-7, 536 pag.

Ca16. AUGUSTIN SEMENESCU, DAN LAMBADARE, MIHAI TIRCOLEA,CEZAR FLORIN PREDA,GEORGE ADRIAN VOICU,BOGDAN FLOREA-„UTILIZAREA MATHCAD IN TEHNICA,MATEMATICA SI ECONOMIE”, Ed. MATRIX-ROM, Bucuresti, 2010, ISBN 9789737556165, 304 pag.

Ca17. GEORGE ADRIAN VOICU, AUGUSTIN SEMENESCU, ANCA FLORINA VOICU- „ECONOMIE”, editura Lux Libris, 2010, ISBN978-973-131-079-4, 500 pag.

Ca18. VOICU GEORGE ADRIAN, AUGUSTIN SEMENESCU,VOICU ANCA FLORINA-„CERCETARI DE MARKETING”, Editura Lux Libris, 2010, ISBN 978-973-131-077-0, 163 pag.

Ca19. GEORGE ADRIAN VOICU, AUGUSTIN SEMENESCU,ANCA FLORINA VOICU-„CONCURENTA ECONOMICA SI AJUTOR DE STAT”, ISBN 978-973-131-078-7 446 pag

Ca20. A. SEMENESCU, M. TARCOLEA, C.F.PREDA, B.FLOREA – «MATHCAD –UTILIZARE SI APLICATII», 260 p. ISBN 973-755-026-9, Ed. MATRIX-ROM, Bucuresti, 2007

Ca21. ROLAN SOMMER (AT), FILIP CALLEWAERT (BE), FRANCE DANTIN (FR), MARTIN HYNES (IE), MARIA RIMINI DORING (DE), CIRO FRANCO (IT), JESMOND XUEREB (MT) A. SEMENESCU (RO), A.MEGHEA (RO), JOSEPH M SURIS (ES), MARY RITTER (UK), GORAN BLOMQVIST (SE), S.A. – „ MOBILITY OF RESEARCHERS BETWEEN ACADEMIA AND INDUSTRY-12 PRACTICAL RECOMMENDATIONS”, 30p.© European Communities, 2006, Luxembourg: Office for Official Publications of the European Communities, Printed in Belgium

Ca22. SORIN PETRE DIMITRIU, AUGUSTIN SEMENESCU, MIHAELA SEMENESCU: “STATISTICĂ MACROECONOMICĂ ŞI MICROECONOMICĂ”, 232 p. ISBN 973-685-986-X, Ed. MATRIX-ROM, Bucuresti, 2005

Ca23. A. SEMENESCU: “STATISTICA TEORETICA, STATISTICA ECONOMICA, MATEMATICI FINANCIARE, APLICATII INFORMATICE SPECIALIZATE”, 243 p. ISBN 973-685-829-4, Ed. MATRIX-ROM, Bucuresti, 2004

Ca24. A. SEMENESCU: “MODELAREA MATEMATICA SI SIMULAREA NUMERICA IN VEDEREA EFICIENTIZARII INSTALATIILOR REGENERATIVE CONTINUE”, 175 p. ISBN 973-685-839-1, Ed. MATRIX-ROM, Bucuresti, 2004.

Ca25. I.VOINEA, A.SEMENESCU, M.TARCOLEA „ INFORMATICA IN MEDICINA SI INGINERIE MEDICALA”, 327 p. ISBN 973-685-411-6, Ed. MATRIX-ROM, Bucuresti, 2002

Ca26. I.VOINEA, A.SEMENESCU, M.TARCOLEA-„ PRELUCRAREA SI ANALIZA DATELOR DIN MEDICINA SI INGINERIE MEDICALA”, 300 p. ISBN 973-685-398-5, Ed. MATRIX-ROM, Bucuresti, 2002.

Ca27. T.AURITE, D.BUNEA, C.OPRAN, A.SEMENESCU, S.A.-“MANAGEMENTUL PROIECTELOR IN DERULARE”-Ed.Printech,Bucuresti,2000, 156 pag., ISBN 973-652-225-3.

Ca28. A.SEMENESCU, I.BADRAGAN, T.CICONE, A.CROITORU, S.A.:” ENCICLOPEDIA TEHNICA ILUSTRATA”,608 pag.Ed.TEORA,Bucuresti, 1999, ISBN 973-601-412-6.

Ca29. P. GLADCOV, A.C. STRENC, GH. BUCSA, B. BORESKIEVICI, A. SEMENESCU – “PROPRIETATE INTELECTUAL-INDUSTRIALA SI INVENTICA. Antologie de acte normative si comentarii”, Ed. Proinvent, Bucuresti, 1999, 269 p., ISBN 973-99401-0-2

Ca30. M. TARCOLEA, A. SEMENESCU : “SISTEME DE OPERARE”, 156 p., ISBN 973-9402-30-5, Ed. PRINTECH, Bucuresti, 1998. Ca31. M. TARCOLEA, A. SEMENESCU : “LIMBAJE DE PROGRAMARE”, 221 p., ISBN 973-9402-31-3, Ed. PRINTECH, Bucuresti, 1998

Cb - Cărţi de specialitate publicate în edituri recunoscute:


Cb1. I. OPRESCU, C. BALESCU, V. MIREA, A. SEMENESCU, A.STANESCU: “CONTRÔLE DE LA QUALITÉ DES PROCESSUS ET DES PRODUITS”, 193 p. ISBN (10) 973-755-026-9, Ed. MATRIX-ROM, Bucuresti, 2006

Cb2. C. BALESCU , A. SEMENESCU, “ENGINEERING MEASUREMENT FOR MATERIALS PROCESSING”, 129 p. ISBN 973-718-401-7, Ed. PRINTEH, Bucuresti, 2006

Cb3. A. SEMENESCU, C. BALESCU, I. OPRESCU, V. MIREA, C.V.SEMENESCU, B. FLOREA: “CONTROL OF TECHNOLOGICAL PROCESSES FOR MATERIALS PROCESSING”, 304 p. ISBN 973-718-403-3, Ed. PRINTEH, Bucuresti, 2006

Cb4. I. OPRESCU, A. SEMENESCU : “INSTALATII PENTRU TRATAMENTE TERMICE ALE MATERIALELOR CARBONICE”, 240 p. ISBN 973-685-720-4 Ed. MATRIX-ROM, Bucuresti, 2004

Cb5. I. OPRESCU, C. BALESCU, V. MIREA, A. SEMENESCU, D.G.PETRESCU, MIHAELA SEMENESCU: “INSTALATII PENTRU TRATAMENTE TERMICE ALE MATERIALELOR METALICE”, vol II, 337 p. ISBN 973-685-637-2 Ed. MATRIX-ROM, Bucuresti, 2003.

Cb6. I. OPRESCU, C. BALESCU, V. MIREA, A. SEMENESCU, D.G.PETRESCU, MIHAELA SEMENESCU: “INSTALATII PENTRU TRATAMENTE TERMICE ALE MATERIALELOR METALICE”, vol I, 268 p. ISBN 973-685-637-2 Ed. MATRIX-ROM, Bucuresti, 2003

Cb7. A.SEMENESCU, I.OPRESCU, D.G.PETRESCU-„ PROCESE SI INSTALATII DE RACIRE LA TRATAMENTUL TERMIC AL PIESELOR”, 131 p. ISBN 973-685-488-4, Ed. MATRIX-ROM, Bucuresti, 2002

Cb8. I. OPRESCU, V. MIREA, A. SEMENESCU, I. VIRCOLACU, C. BALESCU, E. CAZAN: “AGREGATE SI INSTALATII PENTRU SIDERURGIE SI METALURGIA NEFEROASA”, vol II, 270 p. ISBN 973-9390-68-4 Ed. MATRIX-ROM, Bucuresti, 1998

Cb9. I. OPRESCU, V. MIREA, A. SEMENESCU, I. VIRCOLACU, C. BALESCU, E. CAZAN: “AGREGATE SI INSTALATII PENTRU SIDERURGIE SI METALURGIA NEFEROASA”, vol I, 354 p. ISBN 973-9390-68-4 Ed. MATRIX-ROM, Bucuresti, 1998

Cb10. I. VARCOLACU, I. OPRESCU, C. BALESCU, V. MIREA, A. SEMENESCU: “PROIECTAREA SI CALCULUL NECESARULUI DE MASINI SI UTILAJE METALURGICE”, Ed. Andor Tipo, Bucuresti, 271 p., 1999

Cb11. I. VARCOLACU, I. OPRESCU, C. BALESCU, V. MIREA, A. SEMENESCU: “COMPONENTE ALE UTILAJELOR SI MASINILOR METALURGICE”, Ed. Andor Tipo, Bucuresti, 220 p., 1999

Cc- Cărţi publicate în alte edituri, cu ISBN Cc1. Hadar Anton, Alexandru Marin, Constantin Dan Badea, Horia Miron, Constantin Ranea, Ioan Dan Filipoiu, AUGUSTIN SEMENESCU, Dumitru

Topan, Marcel Dracea, Leonardo- Geo Manescu, Vasile Ostafe, Adriana Isvoran. Dezvoltarea programelor de formare pentru facilitarea accesului la invatare prin actiuni inovatoare in stiinta, tehnologie, inovare si valorificare a proprietatii intelectuale. 1. Valorificarea drepturilor de proprietate intelectuala. 2. Bazele managementului invoarii si transferului tehnologic. 3. Brevetarea inventiilor in Romania si Uniunea Europeana. 4. Jurisprudenta actuala in domeniul proprietatii intelectuale. 5. Managementul antreprenioral al proiectelor de cercetare, dezvoltare, inovare.281 pag. ISBN 978-973-0-16360-5, http://goo.gl/XySoC3, Bucuresti 2014.

Cc2. I. VARCOLACU, I. OPRESCU, C. BALESCU, V. MIREA, A. SEMENESCU: “UTILAJE METALURGICE MECANICE PENTRU TURNATORII”, vol. II, 297 p., Ed. BREN, Bucuresti, 1998.

Cc3. I. VARCOLACU, I. OPRESCU, C. BALESCU, V. MIREA, A. SEMENESCU: “UTILAJE METALURGICE MECANICE PENTRU TURNATORII”, vol. I, 220 p., Ed. BREN, Bucuresti, 1998

Cc4. I. OPRESCU, I. VARCOLACU, C. BALESCU, V. MIREA, A. SEMENESCU: “CONTROLE ET REGULATIONS AUTOMATIQUE DES PROCESSUS” Cours pour les etudiants du Departament de Science - Filiere Francaise. 249 p., Lit. U.P.B., Bucuresti, 1997

Cc5. P. GLADCOV, A. SEMENESCU, A.C. STRENC, GH. BUCSA, DALILA PITU:” PROPRIETATE INDUSTRIALA, PROPRIETATE INTELECTUALA SI INVENTICA”, vol. I – Elemente de baza, Lit. U.P.B> 1997, 97 p

Cc6. I. VARCOLACU, I. OPRESCU, C. BALESCU, V. MIREA, A. SEMENESCU: “CONTROLUL SI REGLAREA VARIABILELOR PROCESELOR SIDERURGICE“. Curs pentru studentii specialitatii Siderurgie, 299 p Lit. U.P.B., Bucuresti, 1997

Cc7. M. TARCOLEA, A. SEMENESCU: “SISTEME DE OPERARE SI LIMBAJE DE PROGRAMARE”. Curs an I. Lit. U.P.B., 167 p. Bucuresti, 1996.

Cc8. I. VARCOLACU, I. OPRESCU, C. BALESCU, V. MIREA, A. SEMENESCU, GH. ARISTOTEL: “FIABILIZAREA PROCESELOR DE TURNARE”. Curs an VI postuniversitar. 224 p. Lit. U.P.B., Bucuresti, 1996.

Cc9. I. OPRESCU, I. VARCOLACU, C. BALESCU, V. MIREA, A. SEMENESCU: “CONTROLUL SI REGLAREA VARIABILELOR TEHNOLOGICE ALE PROCESELOR METALURGICE “. Curs pentru studentii specialitatii D.P.T.T. 267 p., Lit. U.P.B., Bucuresti, 1996.

I- Culegeri şi îndrumare publicate

I1. AUGUSTIN SEMENESCU, s.a COMPETENTE DIGITALE , Editura Niculescu 2015 ISBN 978-973-748-919-7, Nr pagini 284 I2. AUGUSTIN SEMENESCU, s.a INFORMATICA , Editura Niculescu 2015 ISBN 978-973-748-900-5, Nr pagini 398 I3. Petre Simion, Victor Nicolae, AUGUSTIN SEMENESCU, s.a. “MATEMATICA M2- CLS a- 11 a. BREVIAR TERORETIC. EXERCITII SI

PROBLEME REZOLVATE. TESTE DE EVALUARE. MODELE PENTRU TEZA. TESTE SUMMATIVE”- Editura Niculescu 2014 ISBN 978-973-748-861-9, Nr pagini 254

I4. Petre Simion Victor, Nicolae, AUGUSTIN SEMENESCU, s.a. “MATEMATICA M2- CLS A- 12A. BREVIAR TERORETIC. EXERCITII SI PROBLEME REZOLVATE. TESTE DE EVALUARE. TESTE SUMMATIVE”- Editura Niculescu 2014 ISBN 978-973-748-862-6, Nr pagini 244

I5. Petre Simion, Victor Nicolae, AUGUSTIN SEMENESCU, s.a. “MATEMATICA M2- CLS A- 12A. BREVIAR TERORETIC. EXERCITII SI TESTE DE EVALUARE PENTRU BACALAUREAT”- Editura Niculescu 2014, ISBN 978-973-748-863-3, Nr pagini 309

I6. Valentin Nicula, Petre Simion, Vasile Dilimot-Nita, Victor Nicolae, Anca Silvia Negulescu, AUGUSTIN SEMENESCU, s.a. “MATEMATICA M1 CLS A12-A. BREVIAR TEORETIC. EXERCITII SI PROBLEME PROPUSE SI REZOLVATE. TESTE DE EVALUARE”. Editura Niculescu 2014. ISBN 978-973-748-688-2. Nr pagini 264


I7. D.M. BATINETU-GIURGIU, MARIA BATINETU-GIURGIU, V. GHEORGHITA, I. V. MAFTEI, A. SEMENESCU , ION TOMESCU, FLORICA VORNICESCU– “OLIMPIADELE NATIONALE DE MATEMATICA 1954-2003” 570 p. ISBN 973-45-0505-X, Ed. Enciclopedica, Bucuresti, 2004.

I8. D.M. BATINETU-GIURGIU, MARIA BATINETU-GIURGIU,I. BARCHI-DAMIAN, A. SEMENESCU – “ANALIZA XII” 433 p. ISBN 973-685-803-0, Ed. MATRIX-ROM, Bucuresti, 2004

I9. D.M. BATINETU-GIURGIU, MARIA BATINETU-GIURGIU,I. BARCHI-DAMIAN, A. SEMENESCU – “ANALIZA XI” 499 p. ISBN 973-685-648-8, Ed. MATRIX-ROM, Bucuresti, 2003

I10. D.M. BATINETU-GIURGIU, MARIA BATINETU-GIURGIU, A. SEMENESCU – “ALGEBRA IX” 268 p. ISBN 973-685-382-9, Ed. MATRIX-ROM, Bucuresti, 2001

I11. A. SEMENESCU, M. TARCOLEA, F.N. GRAMA – “PROGRAMAM IN PASCAL SAU IN C? ALEGETI! – CULEGERE DE PROBLEME REZOLVATE.”,Editia II revizuita si imbunatatita, Ed. Fair Parteners, 2000, Romania, 307 p., ISBN 973-99984-0-2

I12. A. SEMENESCU, M. TARCOLEA, F.N. GRAMA – “PROGRAMAM IN PASCAL SAU IN C? ALEGETI! – CULEGERE DE PROBLEME REZOLVATE.”, Ed. Fair Parteners,1999, Romania, 307 p., ISBN 973-99439-1-8

I13. C.UDRISTE, A. SEMENESCU, S.CORBU- “GEOMETRIE ANALITICA. PROBLEME STANDARD SI TESTE GRILA”, Ed. Teora, Bucuresti, 1999, 307 p., ISBN 973-99439-1-8.

I14. I. VARCOLACU, I. OPRESCU, A. SEMENESCU “MASURAREA, COMANDA SI REGLAREA AUTOMATE ALE VARIABILELOR PROCESELOR METALURGICE,-APLICATII PRACTICE - MATHCAD“, 157 p., Ed. Andor Tipo, 1999.

I15. A. SEMENESCU, M. TARCOLEA: “PROGRAMAREA IN PASCAL. CULEGERE DE PROBLEME REZOLVATE”, Vol. II, 104 p., Lit. U.P.B., 1997

I16. M. TARCOLEA, A. SEMENESCU: “PROGRAMAREA IN PASCAL. CULEGERE DE PROBLEME REZOLVATE”, Vol. I, 97 p., Lit. U.P.B., 1997

I17. A. SEMENESCU, I. OPRESCU, I. VARCOLACU, C. BALESCU, V. MIREA: “CONTROLE ET REGULATIONS AUTOMATIQUE DES PROCESSUS” Travaux de laboratoire et problemes pour les etudiants du Departament de Science - Filiere Francaise, 55 p., Lit. U.P.B., Bucuresti, 1997.

I18. A. SEMENESCU, I. OPRESCU, I. VARCOLACU, C. BALESCU, V. MIREA: “CONTROLUL SI REGLAREA AUTOMATA A PARAMETRILOR PROCESELOR METALURGICE“, Indrumar de laborator, vol. II, 88 p., Lit. U.P.B., 1996.

I19. VARCOLACU, I. OPRESCU, A. SEMENESCU, C. BALESCU, V. MIREA: “CONTROLUL, COMANDA SI REGLAREA AUTOMATA A PARAMETRILOR PROCESELOR METALURGICE“, Îndrumar de laborator, vol. I, 98 p., Lit. I.P.B., 1993.

D- capitole teoretice redactate D1. Augustin SEMENESCU, Iulian Oprescu- Elemente de proiectare a instalaţiilor metalurgice de elaborare, Cap.1.2 , pag.89-155,Tratat

de Ştiinţa şi Ingineria Materialelor Metalice Vol. 6 Proiectare – Calitatea Produselor – Materiale Speciale – Inginerie Economică Metalurgică, Academia De Ştiinţe Tehnice din România, Asociaţia Generală a Inginerilor din România, ISBN 978-973-720-533-9 (Vol. 6) ISBN 973-720-064-0 (General), Bucureşti, 2014

D2. Iulian Oprescu- Augustin SEMENESCU- Elemente generale de proiectare a uzinelor şi instalaţiilor metalurgice. Proiectarea instalaţiilor de pregătire a materiilor prime, Cap.1.1, pag.8-88, Tratat de Ştiinţa şi Ingineria Materialelor Metalice Vol. 6 Proiectare – Calitatea Produselor – Materiale Speciale – Inginerie Economică Metalurgică, Academia de Ştiinţe Tehnice din România, Asociaţia Generală a Inginerilor din România, ISBN 978-973-720-533-9 (Vol. 6) ISBN 973-720-064-0 (General), Bucureşti, 2014

D3. Adrian IOANA, Augustin SEMENESCU - “ANALIZE ECONOMICO-FINANCIARE ÎN DOMENIUL MATERIALELOR METALICE”, cap. 5 din Tratat de Ştiinţa şi Ingineria Materialelor Metalice, Academia de Ştiinţe Tehnice din România, Editura Agir, pg.1066-1099, ISBN 978-973-720-533-9 (Vol. 6) ISBN 973-720-064-0 (General), Bucureşti, 2014.

D4. Adrian IOANA, Augustin SEMENESCU - “ELEMENTE DE MANAGEMENT ŞI MARKETING ÎN INDUSTRIA DE MATERIALE METALICE”, cap. 6 din Tratat de Ştiinţa şi Ingineria Materialelor Metalice, Academia de Ştiinţe Tehnice din România, Editura Agir, pg.1100-1173, ISBN 978-973-720-533-9 (Vol. 6) ISBN 973-720-064-0 (General), Bucureşti, 2014.

D5. Augustin SEMENESCU- “POSIBILITATI DE MODELARE SI OPTIMIZARE A UNOR CORELATII DE NATURA ECONOLOGICA“, capitolul 4.4 in Tratat de Ştiinţa şi Ingineria Materialelor Metalice, Academia de Ştiinţe Tehnice din România, Editura Agir, 2010, vol 4 intitulat “Tehnologii de procesare primară a materialelor metalice”, ISBN 978-973-720-313-7, ISBN 973-720-064-0, pag.1519-1538

D6. Augustin SEMENESCU- Cap.6 “ELEMENTE DE ECOSOCIOLOGIE METALURGICA”, scap. 7.6 “EVALUAREA IMPACTULUI ECOTEHNOLOGIC SI A IMPACTULUI ECOSOCIAL” in Tratat de Ştiinţa şi Ingineria Materialelor Metalice, Academia de Ştiinţe Tehnice din România,pag.1006-1015, vol.5- Tehnologii de procesare finala a materialelor metalurgice, Ed. AGIR, Bucuresti, 2011, ISBN 973-720-064-0, ISBN-978-973-391-5

30 ARTICOLE/STUDII PUBLICATE (R, V) Ris- reviste de specialitate de circulaţie internaţională recunoscute cotate ISI sau indexate în baze de date internaţionale specifice

domeniului, care fac un proces de selecţie a revistelor pe baza unor criterii de performanta:

Ris1. THE IMPACT OF INDUSTRIAL PROCESSING OF OIL ON THE FOUNTAIN WATER QUALITY, Oana Roxana Chivu, A.Semenescu, C.Babis, C.Amza, G.Iacobescu,Minodora Pasare,V.Petrescu, Zoia Apostolescu REVISTA DE CHIMIE (mensual magazine internationally recognized by review in Chemical Abstracts, Current Contents and Analytical Abstracts and also by inclusion in the index for scientific publications of ISI (Institute for Scientific Information, Philadelphia, USA), Volume: 67 Issue: 12, December, Pag.2577-2583 , Impact Factor: 0.956, Accession Number: WOS:000393230400039


Ris2. THE MATHEMATICAL MODELING OF A CHEMICAL PRODUCTION PREDICTION FOR A CHEMICAL COMPANIE AND THE IMPACT OF THE RESULTS POLLUTANTS ON THE ENVIRONMENT, A.Semenescu, Oana Roxana Chivu, C.Babis, Zoia Apostolescu, C.Amza, G.Iacobescu, V.Petrescu REVISTA DE CHIMIE (mensual magazine internationally recognized by review in Chemical Abstracts, Current Contents and Analytical Abstracts and also by inclusion in the index for scientific publications of ISI (Institute for Scientific Information, Philadelphia, USA), Volume: 67 Issue: 12 Pages: 2659-2661, 2016, December, Impact Factor: 0.956, Accession Number: WOS:000393230400056,Impact factor=0.956

Ris3. METHODS OF EVALUATING THE IMPACT OF AN ENVIRONMENTAL ASPECT IN CASE OF A PETROL PROCESSING COMPANIE,- Augustin Semenescu , Oana Roxana Chivu, Claudiu Babis, Zoia Apostolescu, Maria Alina Gligor, Gabriel Iacobescu REVISTA DE CHIMIE (mensual magazine internationally recognized by review in Chemical Abstracts, Current Contents and Analytical Abstracts and also by inclusion in the index for scientific publications of ISI (Institute for Scientific Information, Philadelphia, USA), Volume 2016, November, Pag.2375-2378 , Impact Factor: 0.956, Accession Number: WOS:000388361900053, ISSN: 0034-7752

Ris4. EVALUATION OF BIODEGRADABILITY OF SURGICAL SYNTHETIC ABSORBABLE SUTURE MATERIALS: AN IN VITRO STUDY(EVALUAREA BIODEGRADABILITATII UNOR MATERIALE DE SUTURA SINTETICE ABSORBABILE: STUDIU IN VITRO), Marius Niculescu, Aurora Antoniac, Eugeniu Vasile, Augustin Semenescu, Octavian Trante, Mirela Sohaciu, Alina Musetescu Revista MATERIALE PLASTICE nr.4/2016, Pag.642-645 , Impact Factor: 0.90, Accession Number: WOS: 000395047100014, ISSN: 0025-5289

Ris5. LUBRICATION OF HIGH SPEED BALL-BEARINGS USING POLYMER ADDITIVES, REVISTA DE CHIMIE Virgil Geamăn, Mihai Alin Pop, Irinel Radomir, Tibor Bedo, Bogdan Florea, Oana-Roxana Chivu, Augustin Semenescu (mensual magazine internationally recognized by review in Chemical Abstracts, Current Contents and Analytical Abstracts and also by inclusion in the index for scientific publications of ISI (Institute for Scientific Information, Philadelphia, USA), Volume 2016, November, Pag.2207-2209, Impact Factor: 0.956, Accession Number: WOS:000388361900016, ISSN: 0034-7752,

Ris6. THE IMPACT OF INDUSTRIAL OIL PROCESSING ACTIVITY ON THE AIR QUALITY Semenescu Augustin, Chivu Oana Roxana; Babis Claudiu, Apostolescu Zoia, Amza Catalin, Petrescu Valentin, Iacobescu, Gabriel -, REVISTA DE CHIMIE (mensual magazine internationally recognized by review in Chemical Abstracts, Current Contents and Analytical Abstracts and also by inclusion in the index for scientific publications of ISI (Institute for Scientific Information, Philadelphia, USA), Volume 2016, October, Pag. 2018-2021, Impact Factor: 0.956, Accession Number: WOS:000388359900027, ISSN: 0034-7752,

Ris7. THERMAL ANALYSIS STUDIES REGARDING TO ECO-COMPOSITES BASED ON JUTE BY APPLYING SALINITY TREATMENT, Radu Francisc. Coterlici, Virgil. Geamăn, Mihai Alin Pop, Tibor Bedo, Irinel Radomir, Bogdan Florea, Oana-Roxana Chivu, Augustin Semenescu REVISTA DE CHIMIE (mensual magazine internationally recognized by review in Chemical Abstracts, Current Contents and Analytical Abstracts and also by inclusion in the index for scientific publications of ISI (Institute for Scientific Information, Philadelphia, USA), Volume 2016, October, Pag.2049-2052 , Impact Factor: 0.956, Accession Number: WOS:000388359900033, ISSN: 0034-7752,

Ris8. ANALYSIS OF THE SURFACE QUALITY OF TEST SAMPLES MADE OF BIOCOMPATIBLE TITANIUM ALLOYS BY SINTERING, Corneliu Rontescu, Oana-Roxana Chivu, Adrian Pacioga, Gabriel Iacobescu, Augustin Semenescu - REVISTA DE CHIMIE (mensual magazine internationally recognized by review in Chemical Abstracts, Current Contents and Analytical Abstracts and also by inclusion in the index for scientific publications of ISI (Institute for Scientific Information, Philadelphia, USA), Volume 2016, October, Pag.1945-1947, Impact Factor: 0.956, Accession Number: WOS:000388359900010 ISSN: 0034-7752,

Ris9. ENVIRONMENTAL PERFORMANCE INDICATORS FOR DECISION MAKING AND STAKEHOLDER INTERESTS Mihnea Costoiu, Adrian Ioana, Augustin Semenescu, Nicolae Constantin, Bogdan Florea, Cristian Dobrescu, Massimo Polifroni, Lucian Păunescu Environmental Engineering and Management Journal, Print ISSN: 1582-9596, eISSN: 1843-3707, Impact Factor IF2016: 1.065, Journal Citation Reports® (Thomson Reuters), October 2016, Vol.15, No. 10, http://omicron.ch.tuiasi.ro/EEMJ/ , pag.2279-2284, Accession Number: WOS:000392223200020, ISSN: 1582-9596, eISSN: 1843-3707,

Ris10. RESEARCH ON THE INFLUENCE OF ALLOYING ELEMENTS ON THE BEHAVIOUR OF THE CLADDING BY WELDING OF STEELS- Augustin Semenescu, Oana Roxana Chivu, Claudiu Babis, Zoia Apostolescu,Valentin Petrescu, Gabriel Iacobescu REVISTA DE CHIMIE (mensual magazine internationally recognized by review in Chemical Abstracts, Current Contents and Analytical Abstracts and also by inclusion in the index for scientific publications of ISI (Institute for Scientific Information, Philadelphia, USA), Volume 2016, September, Pag.1787-1792 , Impact Factor: 0.956, Accession Number: WOS:000385266600028, ISSN: 0034-7752,

Ris11. ENVIRONMENTAL IMPACT IN CASE OF FILLET WELDS REHABILITATION FOR WELDED BRIDGES, Babis Claudiu, Augustin Semenescu, Chivu Oana, Apostolescu Zoia, Valentin Petrescu, Gabriel Iacobescu - REVISTA DE CHIMIE (mensual magazine internationally recognized by review in Chemical Abstracts, Current Contents and Analytical Abstracts and also by inclusion in the index for scientific publications of ISI (Institute for Scientific Information, Philadelphia, USA), Volume 2016,September, Pag.1879-1883 Impact Factor: 0.956, Accession Number: WOS:000385266600046, ISSN: 0034-7752

Ris12. ENVIRONMENTAL IMPACT IN CASE OF FILLET WELDS REHABILITATION FOR WELDED BRIDGES, Babis Claudiu, Augustin Semenescu, Chivu Oana, Apostolescu Zoia, Valentin Petrescu, Gabriel Iacobescu - REVISTA DE CHIMIE (mensual magazine internationally recognized by review in Chemical Abstracts, Current Contents and Analytical Abstracts and also by inclusion in the index for scientific publications of ISI (Institute for Scientific Information, Philadelphia, USA), Volume 2016,September, Pag.1879-1883 Impact Factor: 0.956, Accession Number: WOS:000385266600046, ISSN: 0034-7752

Ris13. THE EFFECT OF THE DILUTION MULTIPLE LAYERS, IN THE CASE OF CLADDING BY WELDING, Augustin Semenescu, Claudiu Babis, Oana-Roxana Chivu, Maria Alina Gligor REVISTA DE CHIMIE (mensual magazine internationally recognized by review in Chemical Abstracts, Current Contents and Analytical Abstracts and also by inclusion in the index for scientific publications of ISI (Institute for Scientific Information, Philadelphia, USA), Volume 2016, August, Pag.1555-1557 , Impact Factor: 0.956, Accession Number: WOS:000384514200031, ISSN: 0034-7752, IDS Number: DX6SU, Cited References in Web of Science Core Collection: 12,

Ris14. THE MATHEMATICAL MODEL FOR MANUFACTURING THE NICKEL POWDER WITH DEFINED PROPERTIES Elizabeta Vasilescu, Florea Bogdan, Augustin Semenescu, Oana-Roxana Chivu, Babis Claudiu - REVISTA DE CHIMIE (mensual magazine internationally recognized by review in Chemical Abstracts, Current Contents and Analytical Abstracts and also by inclusion in the index for scientific publications of ISI (Institute for Scientific Information, Philadelphia, USA), Volume 2016, July, Pag. 1329-1332, Impact Factor: 0.90


Ris15. EXPERIMENTAL RESEARCHES FOR MANUFACTURING THE NICKEL POWDER Elizabeta Vasilescu, Marian Neacsu, Vlad Gabriel Vasilescu,Florea Bogdan, Augustin Semenescu , Oana-Roxana Chivu, Babis Claudiu - REVISTA DE CHIMIE (mensual magazine internationally recognized by review in Chemical Abstracts, Current Contents and Analytical Abstracts and also by inclusion in the index for scientific publications of ISI (Institute for Scientific Information, Philadelphia, USA), Volume 2016, June, Pag.1114-1117, Impact Factor: 0.90

Ris16. RESEARCH ON BIOCOMPATIBLE TITANIUM ALLOYS TEST SAMPLES OBTAINED BY SINTERINGCorneliu Rontescu, Oana-Roxana Chivu, Adrian Pacioga, Gabriel Iacobescu, Ion-Mihai Vasile, Dumitru-Titi Cicic, Augustin Semenescu -, REVISTA DE CHIMIE (mensual magazine internationally recognized by review in Chemical Abstracts, Current Contents and Analytical Abstracts and also by inclusion in the index for scientific publications of ISI (Institute for Scientific Information, Philadelphia, USA), Volume 2016, June, Pag.1124-1127 Impact Factor: 0.90

Ris17. FORMATION MECHANISM EMISSIONS IN CASE OF RECONDITIONING BY WELDING IN THE AUTOMOTIVE INDUSTRY CRANCKSHAFTS Augustin Semenescu, Chivu Oana, Babis Claudiu, Apostolescu Zoia - REVISTA DE CHIMIE (mensual magazine internationally recognized by review in Chemical Abstracts, Current Contents and Analytical Abstracts and also by inclusion in the index for scientific publications of ISI (Institute for Scientific Information, Philadelphia, USA), Volume 2016, July, Pag. 1281-1283, Impact Factor: 0.90

Ris18. GLANCE AT THE WORLD-WASTE MANAGEMENT IN ROMANIA Adrian Ioana, Mihai Buzatu, Augustin Semenescu, Waste Management, Volume 53, July 2016, Pages I–IV,doi:10.1016/S0956-053X(16)30280-X , WOS:000378670700026, FI2016 = 3.829

Ris19. THE EFFECT OF THE DILUTION MULTIPLE LAYERS, IN THE CASE OF CLADDING BY WELDING Augustin Semenescu, Claudiu Babis, Oana-Roxana Chivu, Maria Alina Gligor-, REVISTA DE CHIMIE (mensual magazine internationally recognized by review in Chemical Abstracts, Current Contents and Analytical Abstracts and also by inclusion in the index for scientific publications of ISI (Institute for Scientific Information, Philadelphia, USA), Volume 2016, August, Pag.1555-1557 , Impact Factor: 0.90

Ris20. FINITE ELEMENT ANALYSIS ON A MEDICAL IMPLANT Augustin Semenescu, Florentina RADU-IONIȚĂ, Ileana Mariana MATEȘ, Petre BĂDICĂ, Nicolae Dan BATALU- “Romanian Journal of Ophthalmology” online ISSN 2501-2533, ISSN-L 2457-4325, print ISSN 2457-4325, ISSN-L2457-4325, VOLUME 60, ISSUE 2, April-June 2016, pag.116-119

Ris21. COMPUTER ASSISTED DESIGN AND FINITE ELEMENT ANALYSIS OF CONTACT LENSES BATALU Nicolae Dan, SEMENESCU Augustin, MATES Ileana Mariana, NEGOITA Olivia Doina, PURCAREA Victor Lorin, BADICA Petre - “Romanian Journal of Ophthalmology” online ISSN 2501-2533, ISSN-L 2457-4325, print ISSN 2457-4325, ISSN-L2457-4325, VOLUME 60, ISSUE 3, July-Sept 2016, pag.

Ris22. EVALUATION OF AG CONTAINING HYDROXYAPATITE COATINGS TO THE CANDIDA ALBICANS INFECTION By S. Ciuca , M. Badea , E. Pozna , I. Pana , A. Kiss , L. Floroian, Semenescu, Augustin, C.M. Cotrut, M. Moga, A. Vladescu, Journal of Microbiological Methods 125 (2016) pag.12–18 Ms. Ref. No.: MIMET-D-16-00108R1, Impact Factor: 2.026, 5-Year Impact Factor: 2.338

Ris23. HYDROGEN EVOLUTION ANALYZED ON VARIOUS MAGNESIUM ALLOYS - Ana-Iulia Bita, Semenescu, Augustin, Aurora Antoniac, Iulian Antoniac , Key Engineering Materials, Biomaterials and Regenerative Biomedicine, ISSN: 1662-9795, Vol. 695, pp 152-156, doi:10.4028, www.scientific.net, KEM.695.152, © 2016 Trans Tech Publications, Switzerland, Submitted: 2015-12-03, Accepted: 2015-12-14, Online: 2016-05-22

Ris24. ROLE OF MIMICS© IN RECONSTRUCTIVE NEUROSURGERY- A CASE STUDY, Mihai, Tarcolea; Semenescu, Augustin; M., Mitrica; A. V., Chirtes; S., Stanciu; I. M., Mates; G., Vitioanu, Key Engineering Materials, Biomaterials and Regenerative Biomedicine, ISSN: 1662-9795, Vol. 695, p.200-204. doi:10.4038, www.scientific.net, KEM.695.152, © 2016 Trans Tech Publications, Switzerland

Ris25. Dr. Adrian Ioana, Dr. Augustin Semenescu, Dr. Cezar Florin Preda, University“Politehnica” of Bucharest, Romania, ECONOMIC ANALYSIS AND MANAGEMENT MODELS FOR METALLIC MATERIALS INDUSTRY - The journal of American Business Review, Cambridge (JAABC), ISSN 2167-0803, Vol. 2. No. 2, Summer 2014 (New York, London, Beverly Hills, Honolulu, Hong Kong, Miami, Tokyo, Istambul, pag. 159-165 (www.jaabc.com).

Ris26. Ioana, A., (Chaiman al Conferinţei), SEMENESCU A (Co-Chaiman al Conferinţei), Preda, C.F., “FINANCIAL ECONOMIC ASPECTS OF PRECIOUS METALS”, ISI Proceedings of the 2014 International Conference on Economics and Business Administration II (EBA 2014), ISI Proceedings of the 2014 International Conference on Applied Mathematics and Computational Methods in Engineering II (AMCME 14), European Society for Applied Sciences and Development (EUROPMENT), pg. 166-171, Prague, Czech Republic, April 2-4, 2014

Ris27. Ioana, A., SEMENESCU A ,“TECHNOLOGICAL, ECONOMIC, AND ENVIRONMENTAL OPTIMIZATION OF ALUMINUM RECYCLING”, Journal of the Minerals, Metals & Materials Society, JOM: Volume 65, Issue 8 (2013), ISSN 1047-4838 (ISI-Web of Science/Science Citation Index Expanded), pp. 951-957, Accession Number: WOS: 000322136400007, DOI: 10.1007/s11837-013-0664-6, IDS Number: 187RN, Research Areas: Materials Science; Metallurgy & Metallurgical Engineering; Mineralogy; Mining & Mineral ProcessingWeb of Science Categories: Materials Science, Multidisciplinary; Metallurgy & Metallurgical Engineering; Mineralogy; Mining & Mineral Processing, Publisher SPRINGER, 233 SPRING ST, NEW YORK, NY 10013 USA, Cited References in Web of Science Core Collection: 23., Impact Factor: FI =1,42.

Ris28. Ioana, A., SEMENESCU A , Preda, C.F., “KNOWLEDGE MANAGEMENT INNOVATION FOR SUSTAINABLE DEVELOPMENT IN THE CONTEXT OF THE ECONOMIC CRISIS”, WSEAS ISI Proceedings of the 2013 International Conference on Environment, Energy, Ecosystems and Development (EEEAD 2013), ISBN: 978-1-61804-211-8, pp. 21-26, Venice, Italy, September 28-30, 2013

Ris29. Ioana, A. (Chairman al Conferinței), SEMENESCU A, Ghiban, A., “COMPUTATIONAL METHODS AND MANAGEMENT ALGORITMS FOR EAF ELABORATION OPTIMIZATION”, Recent Advances Applied Mathematics and Computational Methods in Engineering, WSEAS ISI Proceedings of the 2013 International Conference on Applied Mathematics and Computational Methods in Engineering (AMCME 2013), ISBN 978-1-6184-200-2, pp. 49-52, Rhodes Island, Greece, July 16-19, 2013.

Ris30. Ioana, A., SEMENESCU A ,Ghiban, A., “OPPORTUNITIES AND CHALLENGES IN OVERCOMING THE ECONOMIC CRISIS”, Procedia Economics and Finance (Elsevier), ISSN 2212-5671 Volume 6, 2013, pg. 73–80, 2013.

Ris31. Ioana, A., SEMENESCU A ,Preda, C.F., “ELEMENTS OF BEST MANAGEMENT FOR METALLURGICAL TECHNOLOGICAL PLANTS”, Metalurgia International Volume: 18, Special Issue: 1/2013, ISSN 1582-2214, (ISI-Web of Science/Science Citation Index Expanded),

http://www.jaabc.com/


Bucureşti, 2013, Pages: 165-167, Research Areas: Metallurgy & Metallurgical Engineering, Web of Science Categories:Metallurgy & Metallurgical Engineering, Publisher EDITURA ŞTIINŢIFICĂ FMR, Bucureşti, Cited References in Web of Science Core Collection: 9, Accession Number: WOS: 000315368200037, IDS Number: 095XL, Impact Factor: FI 0,14799.

Ris32. Ioana, A., SEMENESCU A ,Preda, C.F., “METALLURGICAL MARKETING MIX (MMM) ELEMENTS”, Metalurgia International, Volume: 18, Special Issue: 1/2013, ISSN 1582-2214, (ISI-Web of Science/Science Citation Index Expanded), Bucureşti, 2013, Pages: 156-159, , Research Areas: Metallurgy & Metallurgical Engineering, Web of Science Categories:Metallurgy & Metallurgical Engineering, Publisher EDITURA ŞTIINŢIFICĂ FMR, Bucureşti, Cited References in Web of Science Core Collection: 10, Accession Number: WOS: 000315368200035, IDS Number: 095XL, Impact Factor: FI 0,14799

Ris33. Ioana, A., SEMENESCU A., Preda, C.F., “MANAGEMENT OF STEELS QUALITY ELEMENTS”, Metalurgia International, Volume:18, Special Issue: 1/2013, Pages: 173-175, ISSN 1582-2214, (ISI-Web of Science/Science Citation Index Expanded), Bucureşti, 2013, Accession Number: , Research Areas: Metallurgy & Metallurgical Engineering, Web of Science Categories: Metallurgy & Metallurgical Engineering, Publisher EDITURA ŞTIINŢIFICĂ FMR, Bucureşti, Cited References in Web of Science Core Collection: 13, WOS: 000315368200039, IDS Number: 095XL, Impact Factor: FI 0,14799

Ris34. Bortun C.M, Ghiban B.,Ghiban Al., Cernescu A.,.Ghiban N. SEMENESCU A. – “COMPARATIVE STUDIES OF TENSILE AND BENDING BEHAVIOR FOR SOME CoCrMo ALLOYS”, Metalurgia International No.7 2011, pp. 5-13, ISI Web of Knowledge, Web of Science , Accession Number: WOS:000294516100001, ISSN: 1582-2214, Impact Factor: FI 0,14799

Ris35. Motoc DL (Motoc, Dana Luca), Curtu I (Curtu, Ioan), Soica A (Soica, Adrian), SEMENESCU A. (Semenescu, Augustin)- “MULTIPHASE POLYMERIC COMPOSITE MATERIALS CTE VARIATION WITH EXTREME ENVIRONMENTALCONDITIONS”, Materiale Plastice Volume: 47 Issue: 2 Pages: 236-239, Published:JUNE,2010 ,ISSN:0025-5289, Accession Number: WOS:000281051300023, ISSN: 0025-5289, Impact Factor:

Ris36. AUGUSTIN SEMENESCU, IONEL POPESCU,TUDOR PRISECARU,ELENA POPA,LUCIAN MIHAESCU, VALENTIN APOSTOL - FEM ANALYSIS OF SOME TYPE OF CRACKS IN HIGH PRESSURE-HIGH TEMPERATURE APPARATUS, METALURGIA INTERNATIONAL, Volume: 14, Issue: 12, Pages: 9-15, WOS:000270922700002, ISSN: 1582-2214, Impact Factor: FI 0,14799

Ris37. A. Circiumaru. G. Andrei, I.G.Birsan, A.SEMENESCU - “ELECTRICAL CONDUCTIVITY OF FABRIC BASED FILLED EPOXY COMPOSITES“, Materiale Plastice, Romania, ISSN 0025/5289, Vol.46, no.2/2009, p. 211-214, Impact Factor:.

Ris38. Dumitrescu A. St., Prisecaru T SEMENESCU A. – “NUMERICAL RESEARCHES IN ORDER TO DESIGN A MIXED GAS OIL BURNED WITH LOW NOX EMISSION”, Metalurgia International No.5 2010, pp. 74-77, ISI Web of Knowledge, Web of Science, Impact Factor: FI 0,14799

Ris39. Dumitrescu A. St., Prisecaru T., SEMENESCU A. – “POSIBILITIES OF BURNING DIMITHILETER WITH SELF-ASPIRATION BURNER”, Metalurgia International No.5 2010, pp. 19-21, ISI Web of Knowledge, Web of Science, Impact Factor: FI 0,14799

Ris40. Ghiban Brandusa, Bordeasu IIare, Ghiban, Nicolae, Semenescu, Augustin, Miculescu Florin, Ghiban Alexandru - STRUCTURAL FEATURES OF CAVITATION DAMAGES IN SOME STAINLESS STEELS, ANNALS OF DAAAM FOR 2009 & PROCEEDINGS OF THE 20TH INTERNATIONAL DAAAM SYMPOSIUM, Volume: 20, Pages: 1561-1562, Published: 2009, 20th International Danube-Adria-Association-for-Automation-and-Manufacturing Symposium, Vienna, AUSTRIA, NOV 25-28, 2009, WOS:000265431100014, ISSN: 0025-5289

Ris41. AUGUSTIN SEMENESCU, TUDOR PRISECARU, MALINA PRISECARU, CRISTINA CIOBANU „LOW COST NOx REDUCTION POSSIBILITIES FOR COAL FIRED BIG STEAM BOILERS” , Metalurgia International VOL XIV, NO.7 SPECIAL ISSUE, ISSN 1582-2214, pp.77-82 ISI Web of Knowledge, Web of Science, WOS:000268716400016, ISSN: 1582-2214

Ris42. TUDOR PRISECARU, AUGUSTIN SEMENESCU, CONSTANTIN DANIEL COMEAGA, CRISTIAN GABRIEL ALIONTE-„EXPERIMENTAL INTEGRATED SYSTEM USED FOR COMBUSTION PROCESS AND RESULTED FLUE GAS ANALYSIS”, Metalurgia International VOL XIV, NO.7 SPECIAL ISSUE, ISSN 1582-2214,pp.36- 42, ISI Web of Knowledge, Web of Science, WOS:000268716400008, ISSN: 1582-2214, Impact Factor:

Ris43. MARIUS MARINEL STANESCU, DUMITRU BOLCU, ION MANEA, ION CIUCA, MIHAI BAYER, AUGUSTIN SEMENESCU, „EXPERIMENTAL RESEARCHES CONCERNING THE PROPERTIES OF COMPOSITE MATERIALS WITH RANDOM DISTRIBUTION OF REINFORCEMENT”, Rev.Materiale Plastice, vol.46, nr.1, 2009 , PAG. 73-78, ISI Web of Knowledge, Web of Science, WOS:000265431100014, ISSN: 0025-5289, Impact Factor:

Ris44. ADINA COTARTA, ADRIAN VOLCEANOV, ERIC CHAINET, MICHEL IGNAT, NIKOLAI MYSHKIN, AUGUSTIN SEMENESCU: “SYNTHESIS AND CARACTERIZATION OF NIP THIN LAYERS FOR ELECTRONIC APPLICATION” Romanian Journal of Materials, ISSN 1583-3186, CNCSIS grupa A, indexata si recenzata in Thomson Reuters Services: Science Citation Index Expanded, Materials Science Citation Index, Journal Citation Reports/Science Edition , recenzata in Chemical Abstracts, Ceramic Abstracts, CNRS - INIST, Glass File, MK - Periodica si inclusa in catalogul Canada Institute for Sientific & Technical Information.

Ris45. ALEXANDRU STĂNESCU, BOGDAN FLOREA, CEZAR BALESCU, AUGUSTIN SEMENESCU – “THE COMPLEX CONTROL OF THE METAL COATING PROCESS BY ELECTRODEPOSITION”, Metalurgia International, 2009, no.9, p.44-47, ISI Web of Knowledge, Web of Science, WOS:000269587900009, ISSN: 1582-2214

Ris46. B. GHIBAN, F. PURGHEL, N. GHIBAN, R. I. IACOBESCU, S. CIUCA, A. SEMENESCU, N. SERBAN, “INVESTIGATION CONCERNING CORROSION AND MECHANICAL BEHAVIOUR OF SOME DEVICES FOR OSSTEOSINTHESIS FRACTURE RECOVERY” Rev. JOAM 2009, cotata in baza de date www.scientific.net,

Ris47. Gh. AMZA,D.DOBROTA, A.SEMENESCU, D.IANCULUI, “RESEARCHES CONCERNING THE ULTRASONIC ENERGY’S INFLUENCE OVER THE RESISTANCE AT EXTRACTION OF THE METALLIC INSERTION FROM THE RUBBER MATRIX”, Rev.Materiale Plastice, vol.45, nr.4,2008 , ISI Web of Knowledge, Web of Science, WOS:000262600800014, ISSN: 0025-5289, Impact Factor:

Ris48. B.GHIBAN,N.GHIBAN, N.SERBAN, A.SEMENESCU, “THE SILICON ALLOYING THERMODYNAMICS IN THE AUSTENITIC STAINLESS STEELS”, Rev. Metalurgia International, nr.11, vol.13,p.5-12,2008, ISI Web of Knowledge, Web of Science,

http://apps.webofknowledge.com/OneClickSearch.do?product=UA&search_mode=OneClickSearch&SID=R1okallNiXTEmOdTzUN&field=AU&value=Bordeasu,%20I&ut=7566028&pos=%7b2%7d&excludeEventConfig=ExcludeIfFromFullRecPage

http://www.scientific.net/


Ris49. B.GHIBAN,N.GHIBAN, N.SERBAN, A.SEMENESCU, “BIDIMENSIONAL MODELING OF A BRASS CuZn39Pb3 "YALLE BODY" EXTRUSION PROCESS”, Rev. Metalurgia International, vol.13, nr.12,p.17-21,2008, ISI Web of Knowledge, Web of Science, WOS:000265001700035, ISSN: 1582-2214

Ris50. Z.GHIZDAVET,A.VOLCEANOV, A.SEMENESCU,”CFD SIMULATIONS OF GASES FLOW IN CALCINERS”, Revista de Chimie, 59(5), p.511-514, Mai 2008, ISI Web of Knowledge, Web of Science, WOS:000257684800007, ISSN: 0034-7752, Impact Factor:

Ris51. ALUPEI - COJOCARIU OVIDIU, SEMENESCU AUGUSTIN- "MATHEMATIC MODEL FOR THE DIRECT COLD EXTRUSION PROCESS" Metalurgia International, vol. XII, no.5, 2007, p. 15, ISI Web of Knowledge, Web of Science, WOS:000255786300002, ISSN: 1582-2214

Ris52. ALUPEI-COJOCARIU OVIDIU, SEMENESCU AUGUSTIN- " Romanian expert system for determination the research potential for an effective participation on the European programs", Metalurgia International ,vol. 12, Issue 1, 2007, p. 9-15, ISI Web of Knowledge, Web of Science, WOS:000255293800002, ISSN: 1582-2214

Ris53. Cristian Gabriel Alionte, Constantin Daniel Comeaga, Augustin Semenescu, Tudor Prisecariu, Doina Irina Simion –"CONTROL OF A XY ELECTROMAGNETIC POSITIONING STAGE", STUDIES IN INFORMATICS AND CONTROL With Emphasis on Useful Applications of Advanced Technology, vol 4, 2007, p. 23-29 (A Quarterly Journal, An International Editorial Board, Publication Commencement Date: March 1992. SIC is included within the coverage of the Inspec Database and reviews papers within approximately three months of submission. Every manuscript is reviewed by at least two anonymous referees and accepted articles are published upon receiving the final versions), Volume 16, Number 2, 2007, ISSN 1220-1766 (printed form), ISSN 1841-429X (electronic form) http://www.ici.ro/ici/revista/sic2007_3/art03.html

Ris54. O.ALUPEI-COJOCARU, A.SEMENESCU - ”CIM BASED STEEL PROFILES PROCESSING SYSTEMS”, Rev. Metalurgia International, nr.4,vol.12,p.42-47,2007, ISI Web of Knowledge, Web of Science, WOS:000255786300003, ISSN: 1582-2214

Ris55. O.ALUPEI-COJOCARU, A.SEMENESCU - “CHAINS OF DIMENSIONS IN COMPUTER AIDED DESIGN ENVIROTMENT”, Rev. Metalurgia International, 12(6), p.18-26,2007, ISI Web of Knowledge, Web of Science, WOS:000255786300003, ISSN: 1582-2214

Ris56. T.PRISECARU, A.SEMENESCU,M.PRISECARU, L.MIHAESCU - “NUMERICAL SIMULATION AND PILOT SCALE VALIDATION FOR THE BURNING PROCESS OF PLASTIC WASTE MIXED WITH INDUSTRIAL SLURRY”, Rev. Materiale Plastice, 44(4), p.332-338, 2007, ISI Web of Knowledge, Web of Science, WOS:000253078000015, ISSN: 0025-5289, Impact Factor:.

Rio- Alte reviste de specialitate de circulaţie internaţională Rio1. Adrian IOANA, , Florina Eliza ISTRATE, Mihai BUZATU, Mircea Ionuț PETRESCU, Augustin SEMENESCU, Mirela SOHACIU -

ANALYSIS OF COLLECTING AND RECYCLING OF SOME WASTE CATEGORIES IN ROMANIA, U.P.B. Sci. Bull., Series B, Vol. 78, Iss. 2, 2016 ISSN 1454-2331, pag.203-212.

Rio2. Augustin Semenescu, Florentina Ioniță Radu, Ileana M. Mateș, Petre Bădică, Nicolae D. Batalu FINITE ELEMENT ANALYSIS OF A

MODIFIED SHORT HIP ENDOPROSTHESIS Romanian Journal of Military Medicine, Vol. CXIX, No. 2/2016, August , p.27-31, Aprilie-June 2016, ISSN-L 1222-5126; eISSN 2501-2312; pISSN 1222-5126

Rio3. Augustin SEMENESCU, Ramona Sorina DASCALU – NOI DIRECTIVE ALE UNIUNII EUROPENE – CERINTE PRIVIND DESEURILE DE BATERII SI ACUMULATORI UZATI, Sectiunea MANAGEMENT&CALITATE, Rev. Tehnica si Tehnologie, 2/2014, pag 102-103.

Rio4. Mihai BUZATU, Petru MOLDOVAN, Denisa VONICA, Augustin SEMENESCU, Gheorghe IACOB – “MATHEMATICAL MODELING OF THE FILTRATION PROCESS OF ALUMINIUM MELTS”., UPB Sci.Bull., Series B, vol 76, ISS.2, 2014, ISSN 1454-2331

Rio5. Ioana, A., SEMENESCU A., “ECOLOGICAL TRADE - PREMISE FOR SUSTAINABLE DEVELOPMENT”, International Journal of Energy and Environment, Vol. 8/2014, ISSN: 2308-1007, (BDI: Inspec - The IET), pag. 11-18, 2014.

Rio6. Simona SACEANU, Augustin SEMENESCU, Adrian ARMANGIC, Ionut CRISTEA, Adrian BIBIȘ –” PHYSICAL PROCESSING OF USED BATTERIES CONTAINING Yn AND Mn COMPONENTS”, The Scientific Bulletin of VALAHIA University – MATERIALS and MECHANICS – Nr. 8(year 11) 2013, pag. 66 – 71.

Rio7. Genica BĂDĂNOIU, Traian BUZATU, Augustin SEMENESCU – „DEȘEURILE – DE LA O POVARĂ NEDORITĂ, LA O RESURSĂ PREȚIOASĂ.”, Revista Infomediu Europa (Revistă de mediu și ecologie – Membră a European Environmental press), Anul 8 Nr. 10(95) 25 oct – 24 nov 2013, www.infomediu.eu.

Rio8. Genica BĂDĂNOIU,Adrian ARMANGIC, Augustin SEMENESCU, Traian BUZATU – „MINA DE AUR DIN ORAȘ”., Revista Infomediu Europa (Revistă de mediu și ecologie – Membră a European Environmental press), Anul 8 Nr. 6(91) 25 iun – 24 iul 2013, www.infomediu.eu

Rio9. Ioana, A., SEMENESCU A., Preda, C.F., “EAF ENVIRONMENTAL IMPACT ANALISYS THROUGH MATHEMATICAL MODELING AND FUZZY LOGIC”, Journal Food and Environment Safety of the Suceava University, Food Engineering, Volume XII, Issue 1/March 2013, ISSN 2068-6609, (BDI: Index Copernicus Journal Master List, Ulrichs and Chemical Abstract), pp. 38-46, Suceava, 2013

Rio10. Ioana, A., SEMENESCU A., Preda, C.F., “ANALISYS OF THE ENVIRONMENTAL PEFORMANCE INDICATORS FOR THE EMAS REGULATION”, Journal Food and Environment Safety of the Suceava University, Food Engineering, Volume XII, Issue 1/March 2013, ISSN 2068-6609, (BDI: Index Copernicus Journal Master List, Ulrichs and Chemical Abstract)pp. 73-77, Suceava, 2013

Rio11. Ioana, A., SEMENESCU A., Ghiban, A., “OPPORTUNITIES AND CHALLENGES IN OVERCOMING THE ECONOMIC CRISIS”, PROCEDIA ECONOMICS AND FINANCE (Imprint ELSEVIER), ISSN 2212-5671, Publishing Director, Economics, Econometrics Finance Daniela D. Georgescu, Volume 6, 2013, pg. 73–80, 2013, http://www.journals.elsevier.com/procedia-economics-and-finance, Our reference: FINE438, PII: S2212-5671(13)00116-0, DOI:10.1016/S2212-5671(13)00116-0

Rio12. Dumitrescu A. St., SEMENESCU A. – “SIMULATIONS OF REAL-TIME EVOLUTIONARY OPTIMIZATION AND CONTROL OF METALLURGICAL PROCESSES”, Revista Buletin Ştiinţific, Universitatea Politehnica din Bucuresti, Nr.2 2010, Seria B

http://www.ici.ro/ici/revista/sic2007_3/art03.html

http://www.infomediu.eu/

http://www.infomediu.eu/

http://www.journals.elsevier.com/procedia-economics-and-finance


Rio13. M. Nicolae, A. SEMENESCU, C. Mihailescu, C. Predescu, B.Nicolae, A. Nicolae: “MATHEMATICAL MODEL AND EXPERIMENTS OF REACTIVE POWERS INJECTION INTO METAL BATH IN POURING LADLE“, in I.S.I.J. International, Japan, ISSN 0915 – 1559, 1996, Vol.36, p.66 – 69, indexata ca ISI Proceedings ( http:// isiknowledge.com/XS/CTW)

Rio14. C. Mihailescu, A. Nicolae, A. SEMENESCU, C. Predescu: “WEAR RESISTANCE OF MMC MATERIALS WITH SIC PARTICLES“, in International Symposium on Wear Problems and Wear Resstent Materials“, Bulletin du Cercle d’Etudes des Metaux, France, nov. 1994, Nr. 9, Tome XVI, p. 15.1 - 15.12

Rio15. A. Nicolae, A. SEMENESCU, C. Mihailescu, C. Predescu: “EXPERIMENTAL RESEARCH ON WEAR RESISTENCE AND MACHINABILITY OF WHITE CAST IRONS“,Bulletin du Cercle d’Etudes des Metaux, France, nov. 1994, Nr. 9, Tome XVI, p. 13.4 - 13.12.

Rio16. A. SEMENESCU, R. Pivniceru, S. Banu, I. Oprescu, R. Avis - “NEW SOLUTIONS FOR INCREASING THE DURABILITY OF THE MONOLITHIC REFRACTORY MATERIALS USED IN THROUDS AND RUNNER OF THE BLAST FURNACE“, in: “Stahl und Eisen“, oktober, 1992, p. 197 – 199, ISSN 0340 – 4803, indexata ca ISI Journal ( http:// isiknowledge.com/XS/CTW)

Rns- Reviste de specialitate de circulaţie naţională recunoscute de CNCSIS Reviste tip B Rns1. B. FLOREA, C. BALESCU, V.MIREA, A.SEMENESCU, Al.STANESCU – “CONTROLLING THE THERMAL TREATMENT FOR A

FURNACE USING TWO PROGRAMMATIC CONTROLLERS (CONDUCEREA CU DOUĂ AUTOMATE PROGRAMABILE A UNUI AGREGAT DE TRATAMENT TERMIC )” Rev. METALURGIA, ROMANIA, nr.8, 2007, p.20-25– Revista indexata in baza de date EBSCO Publishing Inc. SUA si baza de date EP Products incepand cu 1.07.2006 (www.ebscohost.com, la rubrica Computers and Applied Sciences Complete) pozitiile 1026 si 1027, baza de date Scopus apartinand lui ELSEVIER BIBLIOGRAPHIC DATABASES-Amsterdam (OLANDA)

Rns2. B. FLOREA, C. BALESCU, V.MIREA, A.SEMENESCU – “THE CONTROLLING PROCESS OF THERMAL TREATMENT FOR FURNACE WITH GAS SUPPLY USING PROGRAMMATIC CONTROLLER (CONDUCEREA CU AUTOMAT PROGRAMABIL A PROCESULUI DE TRATAMENT TERMIC DINTR-UN CUPTOR CU COMBUSTIBIL GAZOS)”, Rev. METALURGIA, ROMANIA, nr.7, 2007, p.25-30– Revista indexata in baza de date EBSCO Publishing Inc. SUA si baza de date EP Products incepand cu 1.07.2006 (www.ebscohost.com, la rubrica Computers and Applied Sciences Complete) pozitiile 1026 si 1027, baza de date Scopus apartinand lui ELSEVIER BIBLIOGRAPHIC DATABASES-Amsterdam (OLANDA)

Rns3. B. FLOREA, A. SEMENESCU, I. OPRESCU, Al. STANESCU – “AUTOMATIZAREA PROCESULUI DE ALIMENTARE A CUPTOARELOR DE ÎNCĂLZIRE ( THE AUTOMATIZATION PROCESS OF HEATTING FURNACE LOADING) “–, Rev. METALURGIA, ROMANIA, nr.6, 2007, p. 44-48 – Revista indexata in baza de date EBSCO Publishing Inc. SUA si baza de date EP Products incepand cu 1.07.2006 (www.ebscohost.com, la rubrica Computers and Applied Sciences Complete) pozitiile 1026 si 1027, baza de date Scopus apartinand lui ELSEVIER BIBLIOGRAPHIC DATABASES-Amsterdam (OLANDA)

Rns4. CRISTIAN VIOREL SEMENESCU, MIRCEA COSTACHE, NICOLAE CONSTANTIN, DIANA IONITA, A SEMENESCU – «EFICIENTIZAREA PRODUCERII FONTEI DE PRIMA FUZIUNE PRIN CONDUCEREA ASISTATA DE CALCULATOR A PROCESULUI DE ELABORARE A FONTEI IN FURNAL - PARTEA II-A: MODUL DE UTILIZARE AL APLICATIEI SOFTWARE "CALCUL FURNAL" »PENTRU CONDUCEREA ASISTATA DE CALCULATOR A PROCESULUI DE ELABORARE A FONTEI IN FURNAL», METALURGIA nr. 8/ 2003, pag. 23-29

Rns5. NICOLAE CONSTANTIN, DIANA IONITA, A SEMENESCU, CRISTIAN VIOREL SEMENESCU, MIRCEA COSTACHE – «EFICIENTIZAREA PRODUCERII FONTEI DE PRIMA FUZIUNE PRIN CONDUCEREA ASISTATA DE CALCULATOR A PROCESULUI DE ELABORARE A FONTEI IN FURNAL - PARTEA I-A: REALIZAREA MODELULUI MATEMATIC DE CONDUCERE ASISTATA DE CALCULATOR A PROCESULUI DE ELABORARE A FONTEI IN FURNAL. REALIZAREA APLICATIEI SOFTWARE "CALCUL FURNAL" »- METALURGIA nr. 7/ 2003, pag. 17-28.

Rns6. NICOLAE CONSTANTIN, DIANA IONITA, A SEMENESCU, CRISTIAN VIOREL SEMENESCU – «METODE ANALITICE PENTRU EFICIENTIZAREA ELABORARII FONTEI IN FURNAL PRIN CORELAREA OPTIMA A CONSUMULUI DE COCS CU PARAMETRII DE SUFLARE LA GURILE DE VANT» - METALURGIA nr. 6/ 2003, pag. 5-12.

Rns7. C. Balescu, V. Mirea, A SEMENESCU, B.Vasiliu– “POSIBILITATI DE UTILIZARE A RETELELOR NEURALE PENTRU MODELE MATEMATICE DESTINATE ANALIZELOR PROCESELOR METALURGICE” – METALURGIA – ROMANIA, nr. 11/2002, p. 5-15;

Rns8. C. Balescu, V. Mirea, A SEMENESCU – “UNELE ASPECTE PRIVIND UTILIZAREA RETELELOR NEURALE(RN) IN CONTROLUL SI OPTIMIZAREA PROCESELOR METALURGICE” – METALURGIA – ROMANIA, nr. 2/2002, p. 15-24;

Rns9. V.T. Petcu Nitica, A SEMENESCU, I. Oprescu – “EFECTE ECOLOGICE ALE CONDUCERII OPTIMALE A BATERIEI DE PREINCALZITOARE DE AER DE TIP REGENERATIV PENTRU FURNAL” (“ECOLOGICAL EFFECTS OF OPTIMAL OPERATION OF REGENERATIVE TYPE AIR PREHEATERS OF BLAST FURNACES”) – METALURGIA – ROMANIA, nr. 1/2002, p. 24-31;

Rns10. V.T. Petcu Nitica, A SEMENESCU, I. Oprescu – “EFECTE ECONOMICE ALE CONDUCERII OPTIMALE A BATERIEI DE PREINCALZITOARE DE AER DE TIP REGENERATIV PENTRU FURNAL” (“ECONOMIC EFFECTS OF OPTIMAL OPERATION OF REGENERATIVE TYPE AIR PREHEATERS OF BLAST FURNACES”) – METALURGIA – ROMANIA, nr. 1/2002, p. 15-23;

Rns11. V.T. Petcu Nitica, A SEMENESCU, I. Oprescu – “A MATHEMATICAL MODEL TO CALCULATE THE REFERENCE TEMPERATURE OF THE FIRST STAGE OF TEMPERATURE CONTROL OF THE HOT BLAST FROM A GROUP OF REGENERATIVE HOT STOVES ”– METALURGIA - English version – ROMANIA, vol. VII, nr. 1/2002, p.15-20.

Rns12. D.M.Bătineţu-Giurgiu, M. Bencze, A SEMENESCU -“ABOUT CALCULATING THE LIMITS OF SOME SEQUENCES“-OCTOGON-Mathematical Magazine,vol.9 ,No.1 , 2001,ISSN 1222 5657, p.413-415.

Rns13. D.M.Bătineţu-Giurgiu, M. Bencze, A SEMENESCU -“A METHOD TO DETERMINE SOME IMPORTANT CONSTANTS“-OCTOGON-Mathematical Magazine, vol.9, No.2, 2001,ISSN 1222 5657, p.926-930.

http://www.ebscohost.com/




Rns14. D.M.Bătineţu-Giurgiu, M. Bencze, A SEMENESCU -“ABOUT THE LIMITS OF THE SEQUENCES“-OCTOGON-Mathematical Magazine, vol.9,No.2,2001,ISSN 1222 5657, p.921-925.

Rns15. A SEMENESCU, T. Prisecaru, Al. S. Ene, L. Valceanu: “MODELAREA MATEMATICA SI SIMULAREA NUMERICA A CUPTOARELOR DE INCALZIRE CU ARZATOARE REGENERATIVE ”, in “Metalurgia”, Romania, Nr. 7/ 2000, p.29 –35

Rns16. Al. Ene, T. Prisecaru, A SEMENESCU, M. Prisecaru, L. Mihaescu: “THE INFLUENCE OF THE PULSATORY FLOW OF FUEL GASES ON HEAT TRANSFER IN COMBUSTION CHAMBERS”, in “Metalurgia International”, Romania, Nr. 3/ 2000, p.33 –40.

Rns17. A SEMENESCU, T. Prisecaru: “MATHEMATICAL MODELING AND NUMERICAL SIMULATION OF FURNACES WITH CONTINUOUS REGENERATIVE BURNERS”, in “Metalurgia International”, Romania, Nr. 3/ 2000, p.23 –32

Rns18. T. Prisecaru, Al. Ene, A SEMENESCU, L. Mihaescu, M. Prisecaru: “THE NUMERICAL SIMULATION OF THE FUNCTIONING OF DRUM STEAM BOILERS WITH SOLID FUEL”, in “Metalurgia International”, Romania, Nr. 3/ 2000, p.17 –22.

Rns19. T. Prisecaru, Al. Ene, A SEMENESCU, M. Prisecaru, L. Mihaescu: “CONSIDERATIONS REGARDING THE APPLICATION OF THE TURBULENCE MODELS IN THE CASE OF BURNING SYSTEMS WITH STRONG SWIRLING”, in “Metalurgia International”, Romania, Nr. 3/ 2000, p.10 –16.

Rns20. L.Mihaescu, A SEMENESCU, T. Prisecaru, Al. Ene, M. Prisecaru: “EXPERIMENTARI PRIVIND OPTIMIZAREA VALORIFICARII ENERGETICE A DESEURILOR DE ELECTROZI SIDERURGICi ”, in “Metalurgia”, Romania, Nr. 2/ 2000, p.33 –41

Rns21. R Popescu, T. Prisecaru, A SEMENESCU, L.Mihaescu, Al. Ene, M. Prisecaru: “SOLUTII TEHNICE MODERNE UTILIZATE PENTRU RECUPERAREA ENERGIEI TERMICE IN PROCESUL DE CALCINARE A COCSULUI DE PETROL”, in “Metalurgia”, Romania, Nr. 2/ 2000, p.8 –20.

Rns22. T. Prisecaru, A SEMENESCU, Al. Ene, M. Prisecaru: “MODELAREA PROCESULUI DE INCALZIRE IN UMPLUTURA UNUI SCHIMBATOR DE CALDURA REGENERATIV CU BILE DE ALUMINA”, in “Metalurgia”, Romania, Nr. 1/ 2000, p.42 –52.

Rns23. A. SEMENESCU, I. Oprescu, C. Balescu, V. Mirea, B.Ignat, Dana Croitoru:”CONDUCERA CU CALCULATORUL ON-LINE A CUPTOARELOR CONTINUE INELARE DE COACERE A PRODUSELOR CARBONICE” in “Metalurgia”, Romania, Nr. 8/ 1999, p.67-72.

Rns24. Oprescu, A. SEMENESCU, V. Mirea, C. Balescu, Dana Croitoru:”AUTOMATIZAREA CUPTOARELOR DISCONTINUE DE COACERE A PRODUSELOR CARBONICE” in “Metalurgia”, Romania, Nr. 7/ 1999, p.90-94.

Rns25. V. Mirea, I. Varcolacu, C. Balescu, A. SEMENESCU, E.Dragulanescu: “SOLIDIFICATION OF CONTINOUS CASTING STEEL” in Metalurgia - English version”, Romania, Vol II, No.3, 1997, p.33-37.

Rns26. Maria Nicolae, Constanta Ittu, A. SEMENESCU, B. Nicolae, D. Nedelcu: “THE CAPITALIZATION OF THE SILICA DUST”, in Metalurgia - English version”, Romania, Vol II, No.3, 1997, p. 35 -42

Rns27. A. Nicolae, Vasilica Dina, Ch. Mihailescu, C. Predescu, A. SEMENESCU: “EXPERIMENTAL AND THEORETICAL RESEARCHES ON THE PREHEATING PROCESSES OF METALLIC CHARGES OF THE ELECTRIC ARC FURNACES”, in Metalurgia - English version”, Romania, Vol II, No.3, 1997, p. 7 -12.

Rns28. V. Mirea, I. Varcolacu, C. Balescu, A. SEMENESCU, M. Suciu: “ANALYSIS OF SEGREGATIONS IN CONTINOUSLY - CAST SLABS” in “Metalurgia - English version”, Romania, Vol I, No.4, 1996, p. 14 - 17.

Rns29. A. SEMENESCU, Ch. Mihailescu, V. Dina, L. Valceanu: “SIMULATION BY FEM OF HEAT TRANSFER IN BURNERS REGENERATORS” in “Metalurgia - English version”, Romania, Vol I, No.3, 1996, p. 39 -42.

Rns30. V. Dina, A. SEMENESCU, C. Predescu: “SOME COSIDERATIONS ABOUT HEAT SAVINGS BY RECOVERING OF THE FLUE GASES HEAT” in “Metalurgia - English version”, Romania, Vol I, No.3, 1996, p. 36 -39

Rns31. I Varcolacu, V. Mirea, E. Cosor, Gh. Aristotel, A. SEMENESCU: “RESEARCHES CONCERNING THE MATHEMATICAL MODELLING OF IRON ORE SINTERING PROCESS (II)” in “Metalurgia - English version”, Romania, Vol I, No.3, 1996, p. 29 -33

Rns32. . V. Mirea, I. Oprescu, I. Varcolacu, C. Balescu, A. SEMENESCU: “NUMERICAL SIMULATION OF THE SOLIFICATION IN METALLURGY OF ALUMINIUM” in “Metalurgia - English version”, Romania, Vol I, No.2, 1996, p. 34 - 36.

Rns33. A. SEMENESCU, I. Oprescu, V. Mirea, I. Varcolacu, C. Balescu: “EXPERIMENTAL RESEARCHES CONCERNING THE IMPROVEMENT OF THE DISCONTINOUS FURNACES FOR CARBON PRODUCTS BAKING” in “Metalurgia - English version” , Romania, Vol I, No.2, 1996, p. 36 - 40.

Rns34. A. SEMENESCU, I. Oprescu, L. Valceanu, P. Hrehorciuc: “UTILIZAREA SISTEMELOR DE CALCUL LA CONDUCEREA CUPTOARELOR DOTATE CU ARZATOARE REGENERATIVE CONTINUE” in “Metalurgia”, Romania, Nr. 12/ 1996, p. 91 -98.

Rns35. A. SEMENESCU, L. Valceanu, P. Hrehorciuc: “SISTEME DE CONTROL AUTOMAT AL CUPTOARELOR DOTATE CU ARZATOARE REGENERATIVE CONTINUE” in “Metalurgia”, Romania, Nr. 12/ 1996, p. 85 - 91.

Rns36. Ch. Mihailescu, A. SEMENESCU: “SIMULAREA INCALZIRII SEMIFABRICATELOR METALICE PRIN METODA CU ELEMENTE FINITE”, in “Metalurgia”, Romania, Nr. 8-9/1996, p.25 -31.

Rns37. A. Nicolae, Ch. Mihailescu, A. SEMENESCU, C. Predescu: “STUDII SI CERCETARI PRIVIND INTERACTIA DINTRE AGENTII METALURGICI DISTRUCTIVI SI ELEMENTELE CERAMICE DE CONSTRUCTIE ALE CUPTOARELOR METALURGICE”, in “Metalurgia”, Romania, Nr. 6-7/1996, p.66 - 71.

Rns38. A. SEMENESCU, I. Oprescu, I. Varcolacu, C. Balescu, V. Mirea, A. Ioana, I. Bajenaru: “TRASAREA AUTOMATA A DIAGRAMEI DE COACERE PENTRU CUPTOARE CONTINUE PE BAZA DATELOR EXPERIMENTALE“, in “Cercetari metalurgice si de noi materiale“, vol. IV, nr. 1, 1996, p. 50 - 63.

Rns39. V. Dina, C. Mihailescu, A. SEMENESCU, M. Nicolae: “CERCETARI PRIVIND TRANSFERUL DE CALDURA IN INSTALATII DE INCALZIRE CU CIRCULATIE CICLONARA A FAZEI GAZOASE“, in “Metalurgia“, Romania, nr. 4 - 5, 1996, p. 82 - 87.

Rns40. V. Dina, C. Mihailescu, A. SEMENESCU, M. Nicolae: “STUDII SI CERCETARI PRIVIND TRANSFERUL DE CALDURA PRIN CONVECTIE FORTATA IN INSTALATIILE INCALZIRE CICLONARE“, in “Metalurgia“, Romania, nr. 2, 1996, p. 23 - 31.

Rns41. R. Pivniceru, P. Kovecsi, A. SEMENESCU: “TEHNOLOGII SI ECHIPAMENTE NOI DE APRINDERE A STRATULUI DE AGLOMERARE DIN MINEREURI FEROASE“, in “Cercetari metalurgice si de noi materiale“, vol. III, nr. 2, 1995, p. 35 - 48.

Rns42. A. Ioana, I. Oprescu, A. SEMENESCU, C. Balescu, V. Mirea: “PREINCALZIREA INCARCATURII - PROCEDEU DE OPTIMIZARE A FUNCTIONARII CUPTOARELOR ELECTRICE CU ARC” in “Metalurgia”, Romania, Nr. Spec., 1995, p.20 - 24.


Rns43. C. Mihailescu, A. SEMENESCU, V. Mirea - “STUDII SI CERCETARI PRIVIND DETERMINAREA TERMOCONDUCTIVITATII MATERIALELOR CERAMICE “, in “Metalurgia“, Romania, nr. 6, 1995, p. 31 – 39

Rns44. A. SEMENESCU, T. Popescu, M. Nicolae, M. Semenescu - “EXPERIMENTARI PRIVIND INSUFLAREA PULBERILOR REACTIVE IN BAIA METALICA A OALEI DE TURNARE“, in “Metalurgia“, Romania, nr. 6, 1995, p. 62 - 70.

Rns45. A. SEMENESCU, I. Oprescu, I Varcolacu, C. Balescu, V. Mirea, A. Ciotlos - “CONTROLUL SI COMANDA PRIN CALCULATOR A INSTALATIILOR DE TRATAMENT TERMIC“, in “Metalurgia“, Romania, nr. 1-2, 1995, p. 16 - 23.

Rns46. C. Balescu, I. Varcolacu, V. Mirea, A. SEMENESCU, V. Balescu - “DETERMINAREA DISTRIBUTIEI TENSIUNILOR LA COMPRIMAREA PRIN PRESARE A MEDIILOR DISPERSE POLIFAZICE, FOLOSIND MODELAREA MATEMATICA“, in: “Metalurgia“, Romania, nr. 1-2, 1995, p. 13 - 16.

Rns47. A. Nicolae, V. Dina, C. Predescu, C. Mihailescu, A. SEMENESCU - "THEORETICAL AND EXPERIMENTAL RESEARCHES CONCERNING THE INTERACTIONS BETWEEN CERAMICS AND ATMOSPHERES OF THE FURNACES", Scientific Bulletin, POLITEHNICA University of Bucharest, Series B: Chemistry & Material Science, vol. 56 - 57, 1994 - 1995, No. 1 - 4, p. 127 - 138.

Rns48. A. Nicolae, V. Dina, C. Predescu, C. Mihailescu, A. SEMENESCU - "STUDIES AN THE PREHEATING OF METALLIC CHARGES OF THE ELECTRIC ARC FURNACES", Scientific Bulletin, POLITEHNICA University of Bucharest, Series B: Chemistry & Material Science, vol. 56 - 57, 1994 - 1995, No. 1 - 4, p. 95 - 102.

Rns49. A. SEMENESCU, I. Oprescu, I. Varcolacu, C. Balescu, V. Mirea: “CONDUCEREA COMPLEXA ASISTATA DE CALCULATOR A CUPTOARELOR INCHISE CONTINUE INELARE DE COACERE A PRODUSELOR CARBONICE“, in “Metalurgia“, Romania, nr. 7, 1994, p. 31 - 36.

Rns50. A. SEMENESCU, I. Oprescu, I. Varcolacu, C. Balescu, V. Mirea: “AUTOMATIZAREA CONVENTIONALA A CUPTOARELOR DE COACERE INELARE“, in “Metalurgia“, Romania, nr. 7, 1994, p. 12 - 19.

Rns51. A. SEMENESCU, A. Nicolae, C. Mihailescu, M. Munteanu, O. Gurgu, L. Valceanu :“ PREINCALZIREA CU ARZATOARE REGENERATIVE A INCARCATURII CUPTOARELOR CU ARC ELECTRIC PENTRU ELABORAREA OTELURILOR“, in “Metalurgia“, Romania, nr. 3-4, 1994, p. 52 – 60, indexata in Database Compendex ( http:// engineeringvillage.com)

Rns52. A. SEMENESCU, I. Oprescu, I. Varcolacu, C. Balescu, V. Mirea - “TENDINTELE ACTUALE IN MODERNIZAREA INSTALATIILOR DE COACERE A PRODUSELOR CARBONICE“, in “Metalurgia“, Romania, nr. 3-4, 1994, p. 35 - 43. indexata in Database Compendex ( http:// engineeringvillage.com)

Rns53. A. Ioana, L. Paunescu, A. SEMENESCU: “ASPECTE TEORETICE SI REZULTATE EXPERIMENTALE CU PRIVIRE LA INSTALATIA DE ARDERE DOTATA CU ARZATOR RECUPERATIV DE CONCEPTIE PROPRIE“, in “Cercetari metalurgice si de noi materiale“, vol. I, nr. 3, 1993, p. 49 - 56.

Rns54. A. SEMENESCU, A. Ioana, I. Oprescu, O. Gurgu - “REZULTATE EXPERIMENTALE OBTINUTE IN EXPLOATAREA INDUSTRIALA A ARZATOARELOR REGENERATIVE“, in “Metalurgia“, Romania, nr. 12, 1993, p. 27 - 34.

Rns55. A. SEMENESCU, A. Ioana, L. Valceanu, I. Varcolacu, C. Balescu, V. Mirea - “DETERMINAREA PE CALE EXPERIMENTALA A PRINCIPALILOR PARAMETRII FUNCTIONALI AI ARZATOARELOR REGENERATIVE CONTINUE“, in “Metalurgia“, Romania, nr. 9, 1993, p. 16 - 21.

Rns56. A. SEMENESCU, I. Varcolacu, C. Balescu, V. Mirea, A. Ioana, O. Gurgu - “ASPECTE PRIVIND POSIBILITATEA DETERMINARII PE CALE EXPERIMENTALA A UNOR PARAMETRII CE CARACTERIZEAZA REGIMUL DE FUNCTIONARE A ARZATOARELOR REGENERATIVE“, in “Metalurgia“, Romania, nr. 8, 1993, p. 36 -39.

Rns57. A. SEMENESCU, A. Ioana - “CERCETARI EXPERIMENTALE IN VEDEREA DETERMINARII PRINCIPALILOR PARAMETRII FUNCTIONALI AI ARZATOARELOR REGENERATIVE“, in “Metalurgia“, Romania, nr. 5, 1993, p. 19 - 23.

Rns58. A. SEMENESCU, O. Gurgu, L. Valceanu, R. Pivniceru - “CERCETARI PRIVIND RECUPERAREA RESURSELOR ENERGETICE SECUNDARE UTILIZÂND ARZATOARE TIP FLACARA CONTINUA REGENERATIVA“, in “Metalurgia“, Romania, nr. 3, 1993, p. 15 - 18.

Rns59. A. SEMENESCU, A. Nicolae, O. Gurgu, M. Munteanu, R. Pivniceru - “CERCETARI PRIVIND CRESTEREA EFICIENTEI ENERGETICE A SISTEMELOR DE ARDERE ALE CUPTOARELOR METALURGICE PRIN UTILIZAREA ARZATOARELOR REGENERATIVE“, in: “Metalurgia“, Romania, nr. 2, 1993, p. 28 - 31.

Rns60. C. Balescu, I. Varcolacu, V. Mirea, A. SEMENESCU, C. Alexandru - “SOME ASPECTS CONCERNING THE MATHEMATICAL MODELATION OF THE STRESS“ - in “Scientific Bulletin of Polytehnic Institute Bucharest - Chemistry and Materials Science“, Series nr. 1 /1992, p. 141 - 151. indexata in Database Compendex ca ISI Journal ( http:// engineeringvillage.com)

Rns61. C. Balescu, I. Varcolacu, V. Mirea, A. SEMENESCU - “SOME ASPECTS CONCERNING THE PRESSING PROCESS OF THE DISPERSED POLYPHASE MEDIA“ - in “Scientific Bulletin of Polytehnic Institute Bucharest - Chemistry and Materials Science“, Series nr. 1 -2 /1992, p. 171 – 177, indexata in Database Compendex ca ISI Journal ( http:// engineeringvillage.com)

Rns62. A. SEMENESCU, R. Pivniceru - “PROCEDEE NOI DE PREINCALZIRE A AERULUI PENTRU FURNALE MODERNE“, in: “Metalurgia“, Romania, nr. 7, 1992, p. 13 - 18. recenzata si indexata in Materials Information, edited by The Institute of Materials, 1 carlton House Terrace, London SW1Y 5DB, England andASM International, materials Park, Ohio 44073-0002, USA ( conforn scrisorii adresate din 3 Nov. 1992)

Rns63. A. SEMENESCU, R. Pivniceru - “GRAFITIZAREA PRIN ELECTROTERMIE A PRODUSELOR CARBUNOASE“, in: “Metalurgia“, Romania, nr. 6, 1992, p. 9 - 13. , indexata in Referativnii Jurnal Metalurghia, Proizvod stv ciuguna i stali, 1993, nr 5, referat 5B 67

Rns64. I. Oprescu, Fl. Gheorghiu, A. SEMENESCU - “CERCETARI PRIVIND PROCESUL DE EVACUARE A VOLATILELOR PRIN STRATUL DE MATERIAL DE IMPACHETARE LA COACEREA PRODUSELOR CARBONICE“, in: “Metalurgia“, Romania, nr. 7, 1991, p. 7 - 12.

Rns65. A. SEMENESCU, R. Pivniceru - “CONTRIBUTII IPROMET LA PROIECTAREA AGREGATELOR DE CALCINARE A COCSULUI CU STRUCTURA ORIENTATA“, in: “Metalurgia“, Romania, nr. 4, 1991, p. 21 – 24, recenzata si indexata in Referativnii Jurnal Metalurghia, Proizvod stv ciuguna i stali, 1991, nr 11, referat 11B 49

Rns66. A. SEMENESCU, R. Pivniceru - “CRITERII TEORETICE SI PRACTICE PENTRU DIMENSIONAREA RATIONALA A ZIDARIEI CUPTOARELOR INDUSTRIALE“, in: “Metalurgia“, Romania, nr. 8, 1990, p. 385 - 389. , recenzata si indexata in Referativnii Jurnal Metalurghia, Proizvod stv ciuguna i stali, 1991, nr 9, referat 9B 63


Rns67. A. SEMENESCU, P. Teoreanu, R. Pivniceru, C. Petcu - “UTILIZAREA CAPTUSELILOR REFRACTARE DOLOMITICE PENTRU CUPTOARELE ROTATIVE TUBULARE DIN INDUSTRIA METALURGICA“, in: “Metalurgia“, Romania, nr. 6, 1990, p. 269 - 270. recenzata si indexata in Referativnii Jurnal Metalurghia, Proizvod stv ciuguna i stali, 1991, nr 7, referat 7B 49.

Rns68. Semenescu, R. Pivniceru, C. Covalschi, C. Sarbu, O. Jalobeanu - “RACIREA PRIN VAPORIZARE A CUPTOARELOR ELECTRICE CU ARC“, in “Metalurgia“, Romania, nr. 3, 1990, p. 111 - 114.

Reviste tip C Rns69. D.M.Batinetu –Giurgiu, A. SEMENESCU – “ NEW CLASSES OF LALESCU FUNCTIONS “-Buletinul Stiintific al Universitatii

“POLITEHNICA“ din Timisoara, Tom 44(58), 2,Matematica-Fizica, 1999,AMS Subject Classification: 26A06, pag. 51-58. Rns70. D.M.Batinetu –Giurgiu, A. SEMENESCU – “METHODS FOR APPROACHING WELL-BALANCED LALESCU FUNCTIONS “-Buletinul

Stiintific al Universitatii “POLITEHNICA “ din Timisoara, Tom 44(58), 2,Matematica-Fizica, 1999,AMS Subject Classification: 26A06, pag. 64-70;

Rns71. D.M.Batinetu –Giurgiu, A. SEMENESCU – “CONSECINTE ALE UNOR SCHIMBARI DE VARIABILA IN CALCULUL INTEGRALELOR DEFINITE “-Analele Stiintifice al Universitatii “OVIDIUS “ din Constanta, Volumul VIII(2000), Seria Matematica, ISSN 12223-723x, pag. 25-32;

Rns72. D.M.Batinetu –Giurgiu, A. SEMENESCU – “SIRURI DE TIP EULER DEFINITE PRIN POLINOAME“-Analele Stiintifice al Universitatii “OVIDIUS “ din Constanta, Volumul VIII(2000), Seria Matematica, ISSN 12223-723x, pag. 33-38;

Rns73. V. Mirea, I. Varcolacu, C. Balescu, A. SEMENESCU, C. Predescu – “SIMULATION THE RELIABILITY OF METALLURGICAL SYSTEMS”, Buletinul Institutului Politehnic din Iasi, Tom XLIII (XLVII) Fasc. 1 - 2, sectia IX, Stiinta si Ingineria Materialelor, 1997, p. 69 - 77.

Rns74. . I. Oprescu, A. SEMENESCU, V. Mirea, C. Balescu, I.Vircolacu: “AUTOMATIZAREA CUPTOARELOR DICONTINUE DE COACERE A PRODUSELOR CARBONICE”, The annals of “Dunarea de Jos” University of Galati,Fascicle IX, Supplement of the Tome XVI(XXI), 1998, ISSN 1453-083 X,p.36-43.

Rno- Reviste de specialitate de circulaţie naţională : Rno1. Ioana, A., SEMENESCU, A., Rusu, L.A. –“PREZENŢE ROMȂNEŞTI LA „45TH INTERNATIONAL CONFERENCE ON MINING AND

METALLURGY”, Revista “Tehnica Instalaţiilor”, Anul XIII, nr.10(117)/2013, ISSN 1582-6244, pg. 8-9, Târgu Mureş, 2013. Rno2. A. SEMENESCU-“ASUPRA UNEI PROBLEME DE BACALAUREAT”-ARHIMEDE-Revista internationala de cultura matematica, nr 7/8

(iulie/august) 2002, p.19-24 . 40 ARTICOLE/STUDII PUBLICATE ÎN VOLUMELE UNOR MANIFESTĂRI ŞTIINŢIFICE Vi- Volumele unor manifestări ştiinţifice internaţionale recunoscute (cu ISSN sau ISBN) din ţară sau străinătate, inclusiv cotate ISI sau

indexate în baza de date internaţionale: Vi1. Mihnea Costoiu, Adrian Ioana, Augustin Semenescu, Dragos Marcu - EAF MANAGEMENT OPTIMIZATION - IMANEE2016 (the

Innovative Manufacturing Enginnering & Energy Conference), September 23-25, 2016 Kallithea Chalkidiki, Greece,“ Science and Engineering in the land of Aristotle“, URL:www.imane.ro

Vi2. Mihnea Costoiu, Adrian Ioana, Augustin Semenescu, Dragos Marcu - MARKETING MANAGEMENT ELEMENTS - IMANEE2016 (the Innovative Manufacturing Enginnering & Energy Conference), September 23-25, 2016 Kallithea Chalkidiki, Greece,“ Science and Engineering in the land of Aristotle“, URL:www.imane.ro

Vi3. Semenescu Augustin, Amza Gheorghe, Chivu Oana Roxana, Dimitrescu Andrei, Apostolescu Zoia - CONTRIBUTIONS TO THE ENVIRONMENTAL IMPACT OF A COMPANY ENGINEERING AND TECHNOLOGICAL EQUIPMENT, Section Name. 19. Air Pollution and Climate Change, The 16th edition of the SGEM International GeoConferences, 28 June - 7 July, 2016, Albena Resort, Bulgaria.(Papers from every SGEM proceedings are indexed in Thomson Reuters, ISI Web of Science, Elsevier products - SCOPUS, Engineering Village/Compendex. We are voting member of CrossRef (DOI), partner of EBSCOHosts and ProQuest. SGEM Conference Proceedings are indexed into the most popular and scientifically strong databases.) SGEM Conference Proceedings, pag.307-314, ISSN 1314-2704, DOI: 10.5593/SGEM_GeoConference, http://www.sgem.org/

Vi4. Semenescu Augustin, Amza Gheorghe, Chivu Oana Roxana, Dimitrescu Andrei, Apostolescu Zoia - CONTRIBUTIONS TO THE ENVIRONMENTAL IMPACT OF COATING PROCESSES FOR RECONDITIONING BY WELDING, Section Name. 19. Air Pollution and Climate Change The 16th edition of the SGEM International GeoConferences, 28 June - 7 July, 2016, Albena Resort, Bulgaria.(Papers from every SGEM proceedings are indexed in Thomson Reuters, ISI Web of Science, Elsevier products - SCOPUS, Engineering Village/Compendex. We are voting member of CrossRef (DOI), partner of EBSCOHosts and ProQuest. SGEM Conference Proceedings are indexed into the most popular and scientifically strong databases.) SGEM Conference Proceedings, pag.315-322, ISSN 1314-2704, DOI: 10.5593/SGEM_GeoConference, http://www.sgem.org/

Vi5. Amza Catalin Gheorghe, Semenescu Augustin, Amza Gheorghe, Babiş Claudiu, Apostolescu Zoia - THEORETICAL AND EXPERIMENTAL CONTRIBUTIONS ON THE TRANSFORMATION OF INDUSTRIAL ENGINEERING ORGANIZATIONS INTO AN ORGANIZATION ECO TECHNOLOGY, Section Name. 19. Air Pollution and Climate Change The 16th edition of the SGEM International GeoConferences, 28 June - 7 July, 2016, Albena Resort, Bulgaria.(Papers from every SGEM proceedings are indexed in Thomson Reuters, ISI Web of Science, Elsevier products - SCOPUS, Engineering Village/Compendex. We are voting member of CrossRef (DOI), partner of


EBSCOHosts and ProQuest. SGEM Conference Proceedings are indexed into the most popular and scientifically strong databases.) SGEM Conference Proceedings, pag.663-670, ISSN 1314-2704, DOI: 10.5593/SGEM_GeoConference, http://www.sgem.org/

Vi6. Amza Catalin Gheorghe, Semenescu Augustin, Amza Gheorghe, Dimitrescu Andrei, Babiş Claudiu - CONTRIBUTIONS TO METHODS OF PREVENTING AND REDUCING POLLUTION FROM WELDING PROCESSES, Section Name. 19. Air Pollution and Climate Change The 16th edition of the SGEM International GeoConferences, 28 June - 7 July, 2016, Albena Resort, Bulgaria.(Papers from every SGEM proceedings are indexed in Thomson Reuters, ISI Web of Science, Elsevier products - SCOPUS, Engineering Village/Compendex. We are voting member of CrossRef (DOI), partner of EBSCOHosts and ProQuest. SGEM Conference Proceedings are indexed into the most popular and scientifically strong databases.) SGEM Conference Proceedings, pag.299-306, ISSN 1314-2704, DOI: 10.5593/SGEM_GeoConference, http://www.sgem.org/

Vi7. Dumitru-Titi Cicic, Corneliu Rontescu, Catalin Gheorghe Amza, AUGUSTIN SEMENESCU – „RESEARCH CONCERNING THE INFLUENCE OF CONTACT TIP-TO-WORK DISTANCE ( CTWD) ON PENETRATION, BEAD HEIGHT, BEAD WIDTH. STUDY CASE GMAW CLADDING”, Proceedings of the " 2014 International Conference on Advances in Materials (ICAM 2014)", ISSN, indexed by Trans Tech Publications, Scientific.NET, Advanced Materials Research (Volume 1088), Chapter 10: Processing Technologies and Computational Methods in Area of Materials Science, pag. 774-778. DOI 10.4028/www.scientific.net/AMR.1088.774

Vi8. A. Ioana, A. Semenescu, D. Marcu, M. Pollifroni, M. Březinová, "QUALITY AND ENVIRONMENTAL EVALUATION METHODS FOR

METALLIC MATERIALS INDUSTRY", Applied Mechanics and Materials, Vols. 809-810, pp. 1600-1605, 2015, DOI

10.4028/www.scientific.net/AMM.809-810.1600 Vi9. M. Tarcolea, C. Doicin, Augustin Semenescu, M.E. Ulmeanu, M.C. Cotrut and I.M. Mates, Cranioplasty Based on Modern Methods for

Personalized Design and Manufacturing, Advanced Materials and Structures VI, Volume 254, p.126-132, ISBN-13: 978-3-03835-711-7, DOI: 10.4028/www.scientific.net/SSP.254, Proceedings of 6th International Conference "ADVANCED MATERIALS AND STRUCTURES" (16-17 October 2015, Timişoara, Romania), www.scientific.net, KEM.695.152, © 2016 Trans Tech Publications, Switzerland

Vi10. A. Ioana, A. Semenescu,

D. Marcu, M. Pollifroni, M. Březinová, "SOME ASPECTS ABOUT PRODUCT MANAGEMENT OF ELECTRIC ARC FURNACE

ELEMENTS", Applied Mechanics and Materials, Chapter 11: Production Management, Vols. 809-810, pp. 1319-1324, 2015, DOI: 10.4028/www.scientific.net/AMM.809-810.1319

Vi11. Adrian IOANA, AugustinSEMENESCU, Mihnea COSTOIU, Dragoş MARCU, Massimo POLLIFRONI -- ABOUT MARKETING MIX IN METALLURGY AND CUSTOMER SEGMENTATION --The International conference „NEW TRENDS IN SUSTAINABLE BUSINESS AND CONSUMPTION” jointly organized at the Bucharest University of Economic Studies by the Amfiteatru Economic Journal, the Faculty of Business and Tourism and the Association for Innovation and Quality in Sustainable Business, BASIQ, 18th and 19th of June 2015

Vi12. Adrian IOANA, Augustin SEMENESCU, Mihnea COSTOIU, Dragoş MARCU, Massimo Pollifroni -- MANAGEMENT ELEMENTS OF ECO-ECONOMY FIELD -- The 7th International Conference of Management and Industrial Engineering“Management – The Key Driver for Creating Value”ICMIE 2015, October 22nd – 23rd, 2015, Bucharest, Romania

Vi13. Adrian IOANA, Augustin SEMENESCU, Mihnea COSTOIU, Dragoş MARCU, Massimo POLLIFRONI -- CHANGE MANAGEMENT IN THE CONTEXT OF GLOBALIZATION --The 7th International Conference of Management and Industrial Engineering“Management – The Key Driver for Creating Value”ICMIE 2015, October 22nd– 23rd, 2015, Bucharest, Romania

Vi14. A. IOANA & A. SEMENESCU -- QUALITY EVALUATION METHODS FOR METALLIC MATERIALS INDUSTRY --- Proceedings of IManE – Innovative Manufacturing Technology International Conference 20th – 22nd May 2015, Iaşi, România, Section L: Product Quality and Design

Vi15. F. Miculescu, A. Maidaniuc, S.I. Voicu, M. Miculescu, A. Berbecaru, L.T. Ciocan, A. Purcaru, A. Semenescu, O. Preda - STRUCTURAL AND MORPHOLOGICAL INDUCED MODIFICATIONS IN HYDROXYAPATITE OBTAINED BY BONE THERMAL TREATMENTS, The 9-th International Conference on Materials Science and Engineering – BRAMAT 2015, 5-7 March, Brasov, Romania

Vi16. A.I. Blajan, F. Miculescu, I. Ciuca, C. Cotrut, AUGUSTIN SEMENESCU and I. Antoniac - EFFECT OF CALCIUM CONTENT ON THE MICROSTRUCTURE AND DEGRADATION OF MG-CA BINARY ALLOYSPOTENTIALLY USED AS ORTHOPEDIC BIOMATERIALS,– International Conference “Biomaterials, Tissue Engineering & Medical Devices” (BiomMedD’2014), September 17-20, 2014, Constanța, România, Volume 638 of Key Engineering Materials, pag.104-110, ISSN print 1013-9826, ISSN cd 1662-9809, ISSN web 1662-9795

Vi17. Dumitru-Titi Cicic, Corneliu Rontescu, Catalin Gheorghe Amza, AUGUSTIN SEMENESCU – „Research concerning the influence of contact tip-to-work distance ( CTWD) on penetration, bead height, bead width. Study case GMAW cladding”, Proceedings of the " 2014 International Conference on Advances in Materials (ICAM 2014)", ISSN, indexed by Trans Tech Publications, Scientific.NET. Advanced Materials Research Vol. 1088 (2015) pp 774-778, Submitted: 16.11.2014, Accepted: 18.11.2014, Online available since 2015/Feb/10 at www.scientific.net , © (2015) Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/AMR.1088.774

Vi18. Ioana, Adrian; Semenescu, Augustin; Preda, Cezar Florin, ELEMENTS OF QUALITY ANALYSIS IN METALLIC MATERIALS PRODUCTION ( Elements of Quality Analysis in Metallic Materials Production ), Conference: Innovative Manufacturing Engineering Conference (IManE) Location: Chisinau, MOLDOVA Date: MAY 29-30, 2014 , Edited by: Slatineanu, L; Merticaru, V; Nagit, G; et al.Sponsor(s): TCM Iasi, Asociatia Studentilor Absolventilor; Unitrade Lubricants SRL; Acad Sci Moldova ,ENGINEERING SOLUTIONS AND TECHNOLOGIES IN MANUFACTURING, Book Series: Applied Mechanics and Materials, Volume: 657, Pages: 881-885, Published: 2014, ISBN:978-3-03835-275-4, ISSN:1660-9336, WOS:000348898000172

Vi19. Ioana, A., AUGUSTIN SEMENESCU, Preda, C.F - “ECONOMIC MANAGEMENT ELEMENTS OF METALS”, Proceedings of the 12th INFINITI Conference on International Finance, Prato (în curs de apariţie), Italy, June 8 -11, 2014

Vi20. Ioana, A., AUGUSTIN SEMENESCU, Ghiban, A. - “OPPORTUNITIES AND CHALLENGES IN OVERCOMING THE ECONOMIC CRISIS”, Proceedings of the 20th International Economic Conference – IECS 2013, "Post Crisis Economy: Challenges and Opportunities", Sibiu, Romania, May 17-18, 2013

http://www.scientific.net/AMR

http://apps.webofknowledge.com/full_record.do?product=UA&search_mode=MarkedList&qid=34&SID=T2FP5oTexBAqHw6OqgI&page=1&doc=1&colName=WOS


Vi21. Ioana, A., AUGUSTIN SEMENESCU , Preda, C.F – “ENVIRONMENTAL PROTECTION AND ELECTRIC ARC FURNACES”, Proceedinds of 45th International October Conference on Mining and Metallurgy - IOC 2013, ISBN 978-86-6305-012-9, pp. 702-705, Bor Lake, Bor, Serbia, 2013

Vi22. Ioana, A., AUGUSTIN SEMENESCU , Preda, C.F – “QUALITY MANAGEMENT ELEMENTS FOR STEELS ELABORATION”, Proceedinds of 45th International October Conference on Mining and Metallurgy - IOC 2013, ISBN 978-86-6305-012-9, pp. 706-709, Bor Lake, Bor, Serbia, 2013

Vi23. Ioana, A., AUGUSTIN SEMENESCU., Preda, C.F. – “ELEMENTS OF BEST MANAGEMENT FOR METALLURGICAL TECHNOLOGICAL PLANTS”, Proceedings of the 4-th INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE AND TECHNOLOGIES – ROMAT 2012, ISSN 2285-7133, ISBN-L 2285-7133, pg. 67, Bucureşti, 2012

Vi24. Ioana, A., AUGUSTIN SEMENESCU, Preda, C.F.- “METALLURGICAL MARKETING MIX (MMM) ELEMENTS”, Proceedings of the 4-th INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE AND TECHNOLOGIES – ROMAT 2012, ISSN 2285-7133, ISBN-L 2285-7133, pg. 66, Bucureşti, 2012

Vi25. Ioana, A., AUGUSTIN SEMENESCU., Preda, C.F. – “MANAGEMENT OF STEELS QUALITY ELEMENTS”, Proceedings of the 4-th International Conference on Materials Science and Technologies – ROMAT 2012, ISSN 2285-7133, ISBN-L 2285-7133, pg. 63, Bucureşti, 2012.

Vi26. Alexandru Marin, Anton Hadăr, Augustin Semenescu, Dan C. Badea, University POLITEHNICA of Bucharest, Romania - "A NEW PARADIGM ON ENGINEERING AND BUSINESS EDUCATION UTILIZING THE CONCEPTS OF TOTAL INNOVATION MANAGEMENT – ON A PROCEDURE FOR THE EVALUATION OF THE INNOVATIVE POTENTIAL "ICEBE CONFERENCE:1st SAFRI J2EX Conference, CapeTown 20-23.11.2011

Vi27. Anton Hadăr, Alexandru Marin, AUGUSTIN SEMENESCU, Dan C. Badea, University POLITEHNICA of Bucharest, Romania - " PROBLEMS OF CONSTITUTING UNIVERSITY CENTERS FOR INTELLECTUAL PROPERTY EXPLOITATION, FROM THE PERSPECTIVE OF THE INNOVATIVE – ENTREPRENEURIAL EDUCATION". ICEBE CONFERENCE:4th International Conference of Engineering and Business Education, 21 – 23 November 2011, pag.218-231

Vi28. Ghiban B.,Ghiban Al., Bortun C.M,.Ghiban N., SEMENESCU A., Miculescu F., Moldovan P. – “ TENSILE AND BENDING BEHAVIOR FOR SOME CoCrMo ALLOYS”, 24Th European Conference on Biomaterials, The Annual Confeence of the European Society for Biomaterials, Dublin, Ireland, 4th-8th September 2011, The Cycle of Biomaterials-Back to Our Roots, pag. 694, ISI Web of Knowledge, Web of Science

Vi29. L Ungureanu, C.G. Alionte, SEMENESCU A. , Polytehnica University Bucharest Romania, ,-- “AN ANALYSIS of a ROLLER COSTER BRAKING SYSTEM”, 10th , Mecatronica 1/2011, pag. 57-62, Bucharest, Romania

Vi30. GHIBAN B, DUMITRU F-D, GHIBAN N, SABAN R, SEMENESCU A, MARIN M- “CONSIDERATION REGARDING DIE DESIGN FOR EQUAL CHANNEL ANGULAR EXTRUSION“, Annals of DAAAM for 2010@Proceedings of the 21st International DAAAM Symposium, Volume 21, No.1, ISSN 1726-9679, ISBN 978-3-901509-73-5, pages 0189-0190

Vi31. B. GHIBAN, F. PURGHEL, N. GHIBAN, I.V. ANTONIAC , A. SEMENESCU, S. CIUCA, F. MICULESCU, 1 University Politehnica of Bucharest , Romania . 2Emergency Hospital “Badgasar-Arseni”, Romania .-- “INVESTIGATIONS OF DIFFERENT FRACTURE SURFACES FROM STAINLESS STEELS IMPLANTS“, 4th International Conference “Biomaterials, Tissue Engineering & Medical Devices”, BiommedD2010, 23-25th September 2010 Sinaia, Romania

Vi32. D. POPESCU, R.C.PARPALA, D LAPTOIU, R ISTRATE, A.SEMENESCU , 1Polytehnica University Bucharest Romania, 2Colentina Clinical Hospital, Bucharest, Romania, 3Sc Med4Med SRL,-- “FINITE ELEMENT ANALYSIS OF DIFFERENT PEDICLE SCREW TRAJECTORIES”, 4th International Conference “Biomaterials, Tissue Engineering & Medical Devices”, BiommedD2010, 23-25th September 2010 Sinaia, Romania

Vi33. EMILIA-MARIA USURELU, MIHAI BUTU, PETRU MOLDOVAN, AUGUSTIN SEMENESCU -- “HYBRID ALUMINUM MATRIX COMPOSITES OBTAINED THROUGH PROCESSING IN PASTY STATUS”, 21st DAAAM World Symposium "Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions”, 20-23rd October 2010, pag. 1013-1014,University of Zadar, Zadar, Croatia, included in Index to Scientific & Technical Proceedings (ISTP/ISI Proceedings and ISTP CDROM/ ISI Proceedings) of Thomson Scientific - Institute for Scientific Information (ISI)

Vi34. GHIBAN, B.; BORDEASU, I.; GHIBAN, N.; SEMENESCU, A.; MICULESCU, F. & GHIBAN, A. “STRUCTURAL FEATURES OF CAVITATION DAMAGES IN SOME STAINLESS STEELS”, p2521-2526, The 20th DAAAM International World Symposium, THE 20TH INTERNATIONAL DAAAMSYMPOSIUM "INTELLIGENT MANUFACTURING & AUTOMATION: THEORY, PRACTICE &EDUCATION", 3RD EUROPEAN DAAAM INTERNATIONAL YOUNG RESEARCHERSÁND SCIENTISTSĆONFERENCE, 25-28TH NOVEMBER 2009, VIENNA, AUSTRIA, URL: HTTP://WWW.DAAAM.COM EMAIL: [email protected]

Vi35. HADAR, A.; MARIN, D.; SZABO, A.; JIGA, G.; IONITA, S. & SEMENESCU, A.: “A NEW OPERATING PRINCIPLE OF PERCUSSIVE ELECTRICAL MECHANISMS”, p1020-1038, The 20th DAAAM International World Symposium, THE 20TH INTERNATIONAL DAAAMSYMPOSIUM "INTELLIGENT MANUFACTURING & AUTOMATION: THEORY, PRACTICE &EDUCATION", 3RD EUROPEAN DAAAM INTERNATIONAL YOUNG RESEARCHERSÁND SCIENTISTSĆONFERENCE, 25-28TH NOVEMBER 2009, VIENNA, AUSTRIA, URL: HTTP://WWW.DAAAM.COM EMAIL: [email protected]

Vi36. A. SEMENESCU (Sp)RTD AND INNOVATION SYSTEM IN ROMANIA INSTRUMENTS TO LINK UNIVERSITY RESEARCH TO INDUSTRY -THE UNIVERSITY "POLTITEHNICA" BUCHAREST EXPERIENCE - “International Training Workshop on Technological Innovation for Small and Medium-sized Enterprises Based on Science and Technology” September 4-17, 2006, Beijing, China.

Vi37. AL. MARIN, A. SEMENESCU - “KNOWLEDGE THROUGH INNOVATION FOR DEVELOPMENT IN THE SCIENTIFIC/TECHNOLOGICAL PARK FROM “POLITEHNICA” UNIVERSITY OF BUCHAREST, Portorož, Slovenia Management International Conference (MIC) 2006.The MIC 2006 is the 7th international conference of the University of Primorska, Faculty of Management Koper. This year we received 452submissions and selected the best ones only (216 papers), yielding a highly competitive 48% rate of acceptance.The MIC 2006 features 2 keynote addresses, one university presidents/rectors forum (with 8 presidents), one deans’ panel (with 16 deans), and one editors' panel (with 21 editors).The keynote speakers: Dr. JANEZ Potoˇcnik, European Commissioner for




Science and Research, and Dr. Jay Liebowitz, Full Professor in the Graduate Division of Business and Management at Johns Hopkins University, USA., p.687-693

Vi38. A. SEMENESCU (Speaker) – “RELANSIN - National Programme as an instrument to link university research to industry. The University "Poltitehnica" Bucharest experience” - International Conference “Meeting the Challenge: Perspectives of Project Financed Research and Project Oriented Research Institutions in South-Eastern Europe, organized by The Austrian Science and Research Liaison Office Sofia and the Centre for Science Studies & History of Science (CSSHS) at the Bulgarian Academy of Sciences,1-2 Dec. 2005, Sofia, Bulgaria

Vi39. A. SEMENESCU (Speacker) – “BRIDGES BETWEEN NPR&D RELANSIN AND UNIVERSITY RESEARCH”, „Technology and Policy (TAP)”Seul, COREA de SUD 16 august – 2 septembrie 2005;

Vi40. A. SEMENESCU (Sp), C. BALESCU, I. OPRESCU, Politehnica University of Bucharest (RO); Presenting Author: Augustin Semenescu -“METHOD OF THERMAL CALCULATION OF ALUMINA ELECTROLYSES CELLS WITH PREBACKED ANODES”; Conferinta Internationala J-EUROMAT, de la Laussane, Switzerland, 6-9 Sept. 2004;

Vi41. C.F. BALESCU (SP), I. OPRESCU, A. SEMENESCU, POLITEHNICA University of Bucharest (RO); Presenting Author: Cezar Florent Balescu; “TECHNICAL AND ECONOMICAL EFFICIENCY OF THE ALUMINIUM OBTAINED BY ALUMINA ELECTROLYSIS WITHPREBACKED ANODES PLANTS”-- Conferinta Internationala J-EUROMAT, de la Laussane, Switzerland, 6-9 Sept. 2004;

Vi42. A. SEMENESCU, L. MIHAESCU, A. S. ENE,. T. PRISECARU-“ANALIZA PRIVIND VALORIFICAREA PRIN ARDERE A PASTILELOR DE RUMEGUS COMPRIMAT”, A XXIX-A Sesiune De Comunicari Stiintifice Cu Participare Internationala “Tehnologii Moderne in Secolul XXI”, Ministerul Apararii Nationale, Academia Tehnica Militara, Bucuresti, Romania, 15-16 Noiembrie 2001, pag. 256-261

Vi43. A. SEMENESCU, T. PRISECARU, A. S. ENE- “NUMERICAL STIMULATION OF NOX EMISSIONS FROM REGENERATIVE BURNERS FURANCES”, A XXIX-A Sesiune De Comunicari Stiintifice cu Participare Internationala “Tehnologii Moderne in Secolul XXI”, Ministerul Apararii Nationale, Academia Tehnica Militara, Bucuresti, Romania, 15-16 Noiembrie 2001 pag: 250-255;

Vi44. A. SEMENESCU, T. PRISECARU, A. S. ENE-“ASSESEMENT OF NOX FORMATION IN FLAMES, APPLIED IN NUMERICAL EVALUATION OF REGENERATIVE BURNERS PERFORMANCE”, Proceeding –Conferinţa Naţională cu participare internationala de Metalurgie şi Ştiinţa Materialelor, 20-21 sept.2001,Bucureşti, p.750-757;

Vi45. D.M.Batinetu –Giurgiu, A. SEMENESCU – “ CONSIDERATIONS ON EULER SEQUENCES “-Proceedings of the third Annual Conference of Romanian Mathematical Socciety”, Ed. REPROGRAPI, Craiova 2000, I.S.B.N. 973-8092-09-04, pag. 39-45;

Vi46. D.M.Batinetu –Giurgiu, A. Semenescu – “ WALLIS SEQUENCES “-Proceedings of the third Annual Conference of Romanian Mathematical Socciety”, Ed. REPROGRAPI, Craiova 2000, I.S.B.N. 973-8092-09-04, pag. 17-23;

Vi47. D.M.Batinetu –Giurgiu, A. Semenescu – “ A CLASS OF LALESCU SEQUENCES “-Proceedings of the third Annual Conference of Romanian Mathematical Socciety”, Ed. REPROGRAPI, Craiova 2000, I.S.B.N. 973-8092-09-04, pag. 25-37;

Vi48. D.M. Batinetu-Giurgiu, A. Semenescu – “HUNDERD YEARS OF THE LALESCU SEQUENCE”, Lucrarile Seminarului international de creativitate matematica, vol. 9 Baia Mare 2000, p. 1 – 14, ISSN 1224-3310

Vi49. D.M. Batinetu-Giurgiu, A. Semenescu – “A UNITARY WAY TO DETERMINE SOME INDEFINITE INTEGRALS”, Lucrarile Seminarului international de creativitate matematica, vol. 9 Baia Mare 2000, p. 15 – 22, ISSN 1224-3310

Vi50. D.M. Batinetu-Giurgiu, A. Semenescu – “ABOUT SOME INTEGRALS PROPOSED IN GAZETA MATEMATICA”, Lucrarile Seminarului international de creativitate matematica, vol. 9 Baia Mare 2000, p. 23 – 32, ISSN 1224-3310;

Vi51. A Semenescu, T. Prisecaru: “NUMERICAL SIMULATION OF FORGING AND HEAT-TREATMENT FURNACES WITH CONTINUOUS REGENERATIVE BURNERS”, in “A XXVIII-a Sesiune de comunicari stiintifice cu participare internationala organizata cu ocazia implinirii a 50 de ani de la infiintarea Academiei Tehnice Militare”,Bucuresti Romania, 21-22 oct. 1999, p.291 –298.

Vi52. B. Ignat, A. Semenescu, R. Margarit, C. Bulancea:”MODEL MATEMATIC SI SCHEMA DE CONTROL A RACIRII CONTROLATE A BENZILOR LAMINATE LA CALD”, BRAMAT ’99, (Conferinta internationala de stiinta si ingineria materialelor), 3-5 febr. 1999, Brasov, Romania, vol. III, pag. 90-95.

Vi53. A.Semenescu, I.Oprescu, L Valceanu, I.Vircolacu, C.Balescu, V. Mirea:” THE FIRING SYSTEM OF THE YEAR 2000 - FOR HEAT-TREATMENT AND PLASTIC METAL PROCESSING-REGENERATIVE FIRING SYSTEM", 3rd International Symposium of Croatian Metallurgists, State and Development of Plastic Metal Processing (SHM '98), Sibenik, Croatia, June 25-27 1998, Metalurgija, vol 37, br. 2, ISSN 0543-5846, pag. 130. indexata in Database METABK 37(2) 55 – 134

Vi54. S. Pivniceru, A.Semenescu, R. Pivniceru,A. leancu – “A NEW TECHNOLOGY OF CLEAN BURNING FOR OBTAINING A SUPERIOR QUALITY OF METALLURGICAL LIME WITH MINIMUN CONSUPTON OF ENERGY” 3rd International Symposium of Croatian Metallurgists, State and Development of Plastic Metal Processing (SHM '98), Sibenik, Croatia, June 25-27 1998, Metalurgija, vol 37, br. 2, ISSN 0543-5846, pag. 130., indexata in Database METABK 37(2) 55 – 134

Vi55. A. Nicolae, C. Predescu, Vasilica Dina, C. Mihailescu, A. Semenescu, G. Selim: “RESEARCHES CONCERNING THE IMPROVEMENT OF THE THERMAL AND FUNCTIONAL CONDITIONS OF THE METALLURGICAL FURNACE WITH COMBUSTION”, International Metallurgy and Materials Congress, Istambul, 11 – 15 june 1997, pag 133 – 137.

Vi56. V. Mirea, I. Varcolacu, C. Balescu, A. SEMENESCU: “MATHEMATICAL METHOD FOR SIMULATIONS THE RELIABILITY OF TUNDISH AND MOULD OF CONTINOUS CASTING STEEL”, Proceedings of “32-nd International Conference on Inverse Problems in Engineering: Theory and Practice”, Crosice, France, 9 - 14 June 1996, Section B, p. 75.

Vi57. A. Semenescu, Ch. Mihailescu, I. Oprescu, A. Nicolae, C. Predescu: “STUDIES BY FEM ON HYDRODINAMICS OF BAKING FURNACES FOR CARBON PRODUCTS” - “Traditii si perspective in scoala romaneasca de metalurgie. Simpozion International” Romania, Bucuresti, 25 - 26 oct. 1996, Conference Proceedings, p. 509 - 516.

Vi58. A. Ioana, I. Oprescu, A. Semenescu, C. Balescu, V. Mirea: “PREINCALZIREA - PROCEDEU DE OPTIMIZARE A FUNCTIONARII CUPTORULUI ELECTRIC CU ARC“, A II-a Conferinta Nationala de Metalurgie CMM ‘95 cu participare internationala, 27 - 29 sept 1995, Bucuresti, p. 20.

Vi59. A. Nicolae, C. Mihailescu, A. Semenescu, C. Predescu, Gh. Pogea: “STUDIES AND RESEARCH CONCERNING THE INTERACTION BETWEEN CERAMICS AND PROTECTION ATMOSPHERE OF THE ELECTRIC FURNACES“, in “Proceedings of 53-rd Electric Furnace


Conference and 14-th Process Technology Conference”, 134 pag, ISS Headquarters, Iron and Steel Society, A member Society of American Institute of Minning, Metallurgical and Petroleum Engineers Nov., 12 - 15, 1995, Orlando, FL, USA, p. 59 - 66 indexata ca ISI Proceedings ( http:// isiknowledge.com/XS/CTW)..

Vi60. A. Semenescu, C. Mihailescu, I. Oprescu, C. Balescu, V. Mirea: “PREHEATING OF METALLIC CHARGE OF ELECTRIC ARC FURNACES WITH REGENERATIVE BURNERS“, in Proceedings of „5-th European Electric Steel Congres“, si Revue de Metallurgie no 4/ 1995, ISSN 0035 - 1563 Paris, France, 19 - 23 June 1995, p. 621 - 626 indexata ca ISI Proceedings ( http:// isiknowledge.com/XS/CTW).

Vi61. V. Mirea, I. Varcolacu, C. Balescu, P. Toboc, A. Semenescu: “ANALYSIS OF SEGREGATIONS IN CONTINOUSLY CAST SLABS”, Proceedings of “1-st International Conference on Inverse Problems in Engineering”, Florida, USA, 1993, Section B, p. 75

Vi62. V. Mirea, I. Oprescu, I. Varcolacu, C. Balescu, A. Semenescu: “CONTINOUS CASTING OF ALUMINIUM - KILLED STEEL“, in “Proceedings of 32-nd Annual Conference of Metallugists Quebec, Canada, 29 aug. - 2 sept. 1993, p. 186.

Vi63. A. Semenescu, T. Popescu, V. Mirea, R. Pivniceru: “MATHEMATICAL MODELLING WITH THE FINITE ELEMENT METHOD OF THE PROCESSES IN COKE CALCINATION FURNACES“,“2-nd National Conference on Boundary and Finite Elements - with International participation“, Sibiu, Romania, 13 - 15 May, 1993, vol. IV, p. 162 - 167.

Vi64. V. Mirea, I. Varcolacu, C. Bãlescu, A. Semenescu, G. Aristotel: “THREE DIMENSIONAL ELASTO - PLASTIC AND CREEP ANALYSIS OF BULGING IN CONTINOUS CAST SLABS“, “2-nd National Conference on Boundary and Finite Elements - with International participation“, Sibiu, Romania, 13 - 15 May, 1993, vol. III, p. 123 - 129.

Vi65. I. Oprescu, A. Semenescu, F. Gheorghiu, A. Ioana: “MODERNISATION DES INSTALLATIONS DE CUISSON DES ELECTRTODES SIDERURGIQUES A FOURS DISCONTINOUS“, in vol V, al “Session technico-scientifique interdisciplinaire-avec participation internationale”, Resita, Romania, 22 - 23 oct. 1993, p. 115 - 122.

Vi66. V. Mirea, I. Varcolacu, A. Semenescu: “A MATHEMATICAL MODEL FOR THE PREDICTION OF INCLUSION SEPARATION IN CONTINOUS CASTING TUNDISHES“, “2-nd National Conference on Boundary and Finite Elements - with International participation“, Sibiu, Romania, 13 - 15 May, 1993, vol. III, p. 129 - 134.

Vi67. T. Popescu, A. Semenescu, I. Oprescu, V. Mirea: “THERMAL TENSION INSIDE THE IN - VACUUM DEGASSING VASSEL OF DH TYPE USING FINITE ELEMENT METHOD“, “2-nd National Conference on Boundary and Finite Elements - with International participation“, Sibiu, Romania, 13 - 15 May, 1993, vol. IV, p. 136 - 140.

Vi68. A. Semenescu, T. Popescu, I. Oprescu, A. Nicolae, R. Pivniceru: “THERMAL ANALYSIS OF THE IN - VACUUM DEGASSING VASSEL OF RH TYPE USING FINITE ELEMENT METHOD“, “2-nd National Conference on Boundary and Finite Elements - with International participation“, Sibiu, Romania, 13 - 15 May, 1993, vol. IV, p. 156 - 162.

Vi69. IOAN MARGINEAN, AVRAM NICOLAE, CRISTIAN PREDESCU, AUGUSTIN SEMENESCU, MIRELA SOHACIU – “FERROUS MATERIALS FOR ANTICORROSION PROTECTION OBTAINED BY CASTING”, Published 5 Jan 2006 by John Wiley & Sons, Inc. in Steels and Materials for Power Plants, p 229-233, Editor(s): Prof. Dr. P. Neumann, Dr. D. Allen, Prof. Dr. E. Teuckhoff, Print ISBN: 9783527301959,Online ISBN: 9783527606184, DOI: 10.1002/3527606181, Copyright © 2000 Wiley-VCH Verlag GmbH, Weinheim, Series: EUROMAT 99 http://www3.interscience.wiley.com/cgi-bin/bookhome/112202981/

Vi70. A. SEMENESCU,. VARCOLACU, V. MIREA, D. CODESCU, C. GURGU, L. VALCEANU - ” CONTINOUS REGENERATIVE BURNERS- A NEW FIRING SYSTEM FOR HEAT TREATMENT FURNACES”, HEAT TREATING, p. 63-68, ISI Proceedings ( http:// isiknowledge.com/XS/CTW), WOS:A1996BG80C00009, ISBN:0-87170-579-6

Vi71. I. OPRESCU, FL. GHEORGHIU, A. SEMENESCU I. VARCOLACU, C. BALESCU, V. MIREA:- “RESEARCH CONCERNING THE IMPROVEMENT OF THE DISCONTINOUS FURNACES FOR CARBON PRODUCTS” RECENT DEVELOPMENT IN LIGHT METALS, p. 591-596, ISI Proceedings ( http:// isiknowledge.com/XS/CTW), WOS:A1994BB77G00053, ISBN:0-919086-52-7.

Vi72. I. OPRESCU, A. SEMENESCU - “STUDY ON VOLATILE MATTER EVACUATION PROCES THROUGH THE PACKAGE LAYERS IN THE BAKING FURNACES OF CARBONIC ELECTRODES“, “Light Metals 1992“ New York - Publishers, p. 751 - 755. ISI Proceedings ( http:// isiknowledge.com/XS/CTW), WOS:A1991BW92P00106, ISBN:0-87339-146-2.

Vn- Volumele unor manifestări ştiinţifice naţionale Vn1. Augustin SEMENESCU.-"ACCESAREA FONDURILOR EUROPENE DE CERCETARE PENTRU CARBUNE SI OTEL" Inovarea-

Dezvoltarea - Factor determinant al competitivitatii sectorului metalurgic din Romania, Bran 2-4 iunie 2011, Buletin Societatea Romana de Metalurgie, p. 49-58, Vol. XIX, nr. 4, august 2011

Vn2. Hadar A. , Marin Al.,SEMENESCU A. Badea C.D. - "EDUCAŢIA, CERCETAREA ŞTIINŢIFICĂ, INOVAREA ŞI TRANSFERUL TEHNOLOGIC ÎN SLUJBA STRATEGIEI NAŢIONALE ANTICRIZĂ ŞI A BUNEI GUVERNĂRI" Eveniment regional pentru promovarea activităţii de inovare şi transfer tehnologic, Regiunea Centru, Hotel Aro Palace, Sala Europa II, Bdul. Eroilor, nr. 27, Braşov, 20 octombrie 2011, - www.romaniainoveaza.ro

Vn3. B.FLOREA, C. BALESCU, A. SEMENESCU, A.STANESCU- “MODERNIZAREA PROCESULUI DE TURNARE A MODELELOR USOR FUZIBILE CU AJUTORUL PRESEI TIP PM15”, Conferinta Internationala”Turnatoria de la rigoarea tehnicii la arta”4-5 mai 2006, Galati, Romania, Proceeding, p.206-210

Vn4. D.M.BATINETU –GIURGIU, A. SEMENESCU–“SIRURI LALESCU PONDERATE ELIPTIC”, Lucrarile Seminarului International de matematica ”Didactica matematicii” Volum 17,p 31-36, 2002

Vn5. D.M.BATINETU –GIURGIU, A. SEMENESCU –“COLINIARITATE SI SIRURI LALESCU PONDERATE GEOMETRIC”, Lucrarile Seminarului International de matematica ”Didactica matematicii” Volum 17,p 37-42, 2002

Vn6. D.M.BATINETU –GIURGIU, A. SEMENESCU –“SIRUL LUI ANDREI G. IOACHIMESCU LA 105 ANI”, Lucrarile Seminarului International de matematica ”Didactica matematicii” Volum 17,p 37-40, 2001

http://www3.interscience.wiley.com/cgi-bin/bookhome/112202981/


Vn7. D.M.Batinetu –Giurgiu, A. Semenescu –“PROPRIETATILE UNUI SIR DIN MANUALE”, Lucrarile Seminarului International de matematica ”Didactica matematicii” Volum 17,p 41-46, 2001

Vn8. D.M.Batinetu –Giurgiu, A. Semenescu –“ CONSECINTE GEOMETRICE ALE UNOR INEGALITATI ALGEBRICE”, Lucrarile Seminarului International de matematica ”Didactica matematicii” Volum 17,p 47-54, 2001

Vn9. Maria Batinetu –Giurgiu, D.M.Batinetu –Giurgiu, A. Semenescu –“ASUPRA FORMALISMULUI IN CALCULUL PRIMITIVELOR SI INTEGRALELOR”, Lucrarile Seminarului International de matematica ”Didactica matematicii” Volum 17,p 55-58, 2001

Vn10. Maria Batinetu –Giurgiu, D.M.Batinetu –Giurgiu, A. Semenescu –“ASUPRA UNEI ECUATII FUNCTIONALE”, Lucrarile Seminarului International de matematica ”Didactica matematicii” Volum 17,p 59-68, 2001

Vn11. D.S Chirita, L. Mihaescu, A.S. Ene, T. Prisecaru, M. Prisecaru, A. SEMENESCU, - “CERCETARI LA SCARA DE LABORATOR SI INDUSTRIALA PRIVIND ARDEREA RUMEGUSULUI SUB FORMA DE PELETE”, p.170-175, Conferinta Nationala de Echipament Termomecanic Clasic si Nuclear - E.T.C.N. – 2001– Universitatea “POLITEHNICA”Bucuresti, 14-15 iunie 2001, ISBN 973-652-363-2;

Vn12. A. SEMENESCU, A.S. Ene, T. Prisecaru, - “ANALIZA DE CAZ PRIVIND MODELAREA NUMERICA A CUPTOARELOR ECHIPATE CU ARZATOARE REGENERATIVE”, p. 188-191, Conferinta Nationala de Echipament Termomecanic Clasic si Nuclear - E.T.C.N. – 2001– Universitatea “POLITEHNICA”Bucuresti, 14-15 iunie 2001, ISBN 973-652-363-2;

Vn13. A. Semenescu, I. Oprescu, V. Mirea, C. Balescu, I. Vircolacu, B. Ignat: “CONDUCEREA CU CALCULATOR IN REGIM <<SUPERVISORY-CONTROL>> A CUPTOARELOR DE COACERE CONTINUE INELARE”, TPSRM ’98, 30 – 31 oct 1998, editia II, pag. 200 – 205.

Vn14. V. Mirea, I. Vircolacu, C. Balescu, A. Semenescu, R. Margarit: “PARTICULARITATI IN DETERMINAREA FIABILITATII UTILAJELOR METALURGICE”, TPSRM ’98, 30 – 31 oct 1998, editia II, pag. 454 – 459.

Vn15. V. Mirea, C. Balescu, I. Varcolacu, A. Semenescu –“ DETERMINAREA FIABILITATII INSTALATIILOR METALURGICE SPECIFICE". Sesiunea stiintifica jubiliara cu participare internationala "50 DE ANI DE INVATAMANT UNIVERSITAR GALATEAN" - Realizari si perspective in Metalurgie, 15 - 16 Oct. 1998, Galati, Romania, p. 17.

Vn16. C.D.Silviu, L.Mihaescu, T.Prisecaru, A.S.Ene, M.Prisecaru, A. Semenescu : “CERCETARI LA SCARA DE LABORATOR SI INDUSTRIALA PRIVIND ARDEREA RUMEGUSULUI SUB FORMA DE PELETE”-Lucrarile Conferintei Nationale de Echipament Termomecanic Clasic si Nuclear-E.T.C.N-2001,U.P.B.-F.I.M., Bucuresti, 14-15 Iunie 2001, p.

Vn17. D.M. Batinetu-Giurgiu, A. Semenescu – “METODE DE DETERMINARE A LIMITELOR UNOR FUNCTII SI ALE UNOR SIRURI”, Lucrarile Seminarului de DIDACTICA MATEMATICII, vol. 15, Cluj-Napoca 2000, p. 15 – 22

Vn18. D.M. Batinetu-Giurgiu, A. Semenescu – “PROBLEMA LUI LALESCU SI RECIPROCA TEOREMEI CEZARO-STOLZ”, Lucrarile Seminarului de DIDACTICA MATEMATICII, vol. 15, Cluj-Napoca 2000, p. 3 – 8

Vn19. D.M. Batinetu-Giurgiu, A. Semenescu – “UNELE EXTINDERI PRIVIND FUNCTIILE SI SIRURILE LALESCU”, Lucrarile Seminarului de DIDACTICA MATEMATICII, vol. 15, Cluj-Napoca 2000, p. 9 – 14

Vn20. A. Semenescu, T. Popescu, C. Balescu, I. Varcolacu, V. Mirea, A. Ioana: “ANALIZA CAMPURILOR TERMICE UTILIZAND METODA ELEMENTULUI FINIT, A RECIPIENTILOR DE DEGAZARE IN VID TIP RH“, Simpozionul national de metalurgie, FSIM + ICEM, Bucuresti, 12 - 15 ian., 1993, p.85.

Vn21. A. Semenescu, T. Popescu, C. Balescu, A. Nicolae, A. Ioana: “ANALIZA CAMPURILOR TERMICE UTILIZAND METODA ELEMENTULUI FINIT, A RECIPIENTILOR DE DEGAZARE IN VID TIP RH“, Simpozionul national de metalurgie, FSIM + ICEM, Bucuresti, 12 - 15 ian., 1993, p.88.

Vn22. V. Mirea, I. Varcolacu, A. Semenescu: “STUDIUL SOLIDIFICARII PRIMARE LA TURNAREA CONTINUA A SEMIFABRICATELOR DIN OTEL“, Simpozionul national de metalurgie, FSIM + ICEM, Bucuresti, 12 - 15 ian., 1993, p.41.

Vn23. I. Oprescu, A. Semenescu, F. Gheorghiu, A. Ioana: “CRESTEREA EFICIENTEI TEHNICO-ECONOMICE LA COACEREA ELECTROZILOR SIDERURGICI“, in Buletinul “Primului Colocviu national tehnic interdisciplinar“, Braila, 22 - 24 apr. 1993, p. 46 - 57.

Vn24. A. Ioana, L. Paunescu, A. Semenescu: “CERCETARI PRIVIND VALORIFICAREA PRIN ARDERE A GAZELOR COMBUSTIBILE REZIDUALE“, in Buletinul “Primului Colocviu national tehnic interdisciplinar“, Braila, 22 - 24 apr. 1993, p. 126 - 132.

Vn25. A. Ioana, L. Paunescu, A. Semenescu: “ASPECTE TEORETICE CU PRIVIRE LA UN ARZATOR RECUPERATIV DE CONCEPTIE PROPRIE“, in volumul Sesiunii de comunicari stiintifice “Tehnologii si echipamente tehnologice industriale“, sectia “Utilajul si instalatii tehnologice“, 5 - 6 nov. 1992, Facultatea de Inginerie - Hunedoara din cadrul Universitatii Tehnice - Timisoara, p. 30 - 33.

Vn26. A. Ioana, L. Paunescu, A. Semenescu: “REZULTATE EXPERIMENTALE OBTINUTE PE O INSTALATIE DE ARDERE“, in volumul Sesiunii de comunicari stiintifice “Tehnologii si echipamente tehnologice industriale“, sectia “Utilajul si instalatii tehnologice“, 5 - 6 nov. 1992, Facultatea de Inginerie - Hunedoara din cadrul Universitatii Tehnice - Timisoara, p. 34 - 38.

50 BREVETE DE INVENTIE

B1. MICULESCU Florin, MICULESCU Marian, COSTOIU Cosmin-Mihnea, CHIVU Oana-Roxana, BARBU Catalin-Alexandru, SEMENESCU Augustin -- USCATOR DE RUFE MECANO-ELECTRIC — OSIM, A/00522 din 22 iulie 2016.

B2. M. MOGA, A. SEMENESCU, M.C. COSTOIU, I.M. MATES, C.I CĂLIN, C.G. AMZA – ENDOPROTEZĂ SCURTĂ CERVICALĂ FEMURALĂ, Brevet 130731 din 29.07/2015.

B3. BATALU Nicolae-Dan, SEMENESCU Augustin, COSTOIU Mihnea Cosmin, SINESCU Ioanel, ANTONIAC Vasile Iulian, DOICIN Cristian-Vasile, CODOREAN Ion Bogdan, MATEȘ Ileana Mariana, BARBU Cătălin Alexandru, BĂDICĂ Petre, GAVRILIU Traian-Stefan -- PROTEZĂ TOTALĂ DE COT CONSTRÂNSĂ, DIN ALIAJE CU MEMORIA FORMEI, CU FIXARE DE TIP BALAMA ȘI SISTEM DE CUPLARE PE BAZĂ DE EFECT AL MEMORIA FORME I— OSIM, A/00188 din 17 martie 2016.

B4. BATALU Nicolae-Dan, SEMENESCU Augustin, COSTOIU Mihnea Cosmin, ANTONIAC Vasile Iulian, DOICIN Cristian-Vasile, AMZA Cătălin Gheorghe, MATEȘ Ileana Mariana, CHIVU Oana – Roxana, CODOREAN Ion Bogdan, BARBU Cătălin Alexandru, BĂDICĂ Petre, NEGOIȚĂ


Olivia-Doina, PROTEZĂ TOTALĂ DE COT SEMICONSTRÂNSĂ, DIN ALIAJE CU MEMORIA FORMEI, CU SISTEM DE CUPLARE PE BAZĂ DE EFECT AL MEMORIEI FORMEI — OSIM, A/00383 din 27 mai 2016.

B5. Ioana, A., Semenescu, A., Preda, C.F.,” CUPTOR CU ARC ELECTRIC ÎN CURENT ALTERNATIV FUNCŢIONÂND CU APLICAREA EFECTULUI DE PIRAMIDĂ”, Cerere Brevet de Invenţie nr. A/00363, OSIM, 22.05.2012.

B6. Ioana, A., Semenescu, A., Preda, C.F.,” CUPTOR CU ARC ELECTRIC ÎN CURENT CONTINU FUNCŢIONÂND CU APLICAREA EFECTULUI DE PIRAMIDĂ”, Cerere Brevet de Invenţie nr. A/00364, OSIM, 22.05.2012.

B7. Anton HADAR, Alexandru MARIN, Constantin Dan BADEA, AUGUSTIN SEMENESCU, Cristian Gabriel ALIONTE, Maria MIHALY, “PROCEDEU DE TRATARE COMBINATA A LICHIDELOR” - PROCESS FOR THE COMBINED TREATMENT OF LIQUIDS, CONTAINING MOLECULAR SPECIES, COLLOIDS OR MICRO-ORGANISMS, WHICH CAN BE USED FOR STERILIZING LIQUIDS FOR MEDICAL AND FOOD-PRODUCING PURPOSES Patent Number: RO127252-A0

B8. Amza Catalin – Gheorghe,Popescu Diana, Amza Gheorghe, SEMENESCU AUGUSTIN, "METODA şi INSTALAŢIE DE EVALUARE A CALITĂŢII PRODUSELOR INDUSTRIALE BAZATĂ PE INTELIGENŢĂ " - INTELLIGENCE-BASED METHOD AND INSTALLATION FOR EVALUATING QUALITY OF INDUSTRIAL PRODUCTS , Patent Number: RO128159-A2

B9. Popescu Diana, Amza Catalin – Gheorghe, Laptoiu Dan-Constantin, Amza Gheorghe, SEMENESCU AUGUSTIN, Antoniac Vasile Iulian, Cicic Dumitru – Titi - "METODĂ ŞI SISTEM INTELIGENT BAZAT PE RAZE X PENTRU INSTRUIREA CHIRURGILOR ÎN INSERAREA ȘURUBURILOR PEDICULARE", METHOD AND INTELLIGENT SYSTEM BASED ON X RAYS FOR TRAINING SURGEONS IN INSERTING PEDICLE SCREWS, Patent Number: RO128174-A2

B10. ANTONIAC V I; LAPTOIU D C; POPESCU D; SEMENESCU A; AMZA C G - SURUB AUTO-TARODANT CANULAT BIORESORBABIL PENTRU FIXARE LIGAMENTARA--BIORESORBABLE SELF TAPPING CANNULATED SCREW FOR LIGAMENT FIXATION, MADE OF COMPOSITE MATERIAL OF THE POLYMER CERAMICS TYPE , Patent Number: RO128477-A2

B11. Augustin SEMENESCU, Anton HADAR, Alexandru MARIN, Brandusa GHIBAN, Nicolae GHIBAN, Horatiu POP -- „ARZĂTOR RECUPERATIV CU TUBURI TERMICE”- RECUPERATIVE RADIANT TUBE BURNER COMPRISES A MAIN BURNER AND A SINGLE RECOVERY UNIT PROVIDED WITH RADIANT TUBES, WHERE THE MAIN BURNER IS FIXED ON THE FURNACE WALL BY A FLANGE FIXED BY SCREWS, Patent Number: RO126147-A0

B12. Vasile Iulian ANTONIAC, Augustin SEMENESCU, Dan LAPTOIU, Alexandru MARIN, Anton HADAR, Brandusa GHIBAN, Nicolae GHIBAN, Liviu IONESCU, Ovidiu Dorin ALUPEI-COJOCARU, Cristian Gabriel ALIONTE – „TIJA SURUB ORTOPEDICA SI PROCEDEU DE CRESTERE A BIOCOMPATIBILITATII”- ORTHOPEDICAL SCREW ROD AND PROCESS FOR INCREASING BIO-COMPATIBILITY WHICH CONSISTS OF A CONE-SHAPED POINT WHICH HAS A THREADED SEGMENT CONTINUED WITH A THREADED SECTION ADAPTED IN ORDER TO IMPLANT BONE CORTICAL AREA, Patent Number: RO125357-A0; RO125357-A3

B13. Z.G.HEGYI, S.RUS, A.SEMENESCU, C.LEANCU, C.RANEA, "TROLLEY WITH MOBILE ARM FOR OPERATING CASTING LADLE USED IN PRECISION CASTING OF SMALL PARTS”,Patent number:Ro118800-B,Derwent primary accession no.2004-152982, ISI Web of Knowledge ( Z.Hegyi-Gal, S.Rus, A. Semenescu,C.Leancu, C Ranea: “Carucior cu brat mobil de manevrare a oalelor de turnare “).

B14. S.RUS, Z.G.HEGYI, A.SEMENESCU, C.LEANCU, C.RANEA, “PLANT FOR OPERATING CASTING LADLE FOR SMALL BATCHES OF MANUAL PRECISION CASTINGS SUCH AS SECOND FUSION CAST IRON”, Patent number:Ro118799-B,Derwent primary accession no.2004-152981, ISI Web of Knowledge (S.Rus, Z.Hegyi-Gal, A. Semenescu,C.Leancu, C Ranea: “Instalatie de manevrare a oalelor de turnare “.)

B15. A.SEMENESCU, G.D.BUNEA, C.RANEA, I.V.ANTONIAC, “DISCONTINUOUS REGENERATIVE COMBUSTOR INCLUDES MULTIPLE MODULES HAVING CERAMIC BURNERS AND POSTCOMBUSTION TUBES WITH PNEUMATIC TRANSPORT OF THE FLUIDS”, Patent number:Ro117972-B,Derwent primary accession no.2003-137802, ISI Web of Knowledge(A. Semenescu,D.G.Bunea, C Ranea, V.I.Antoniac: “Procedeu si instalatie discontinua de ardere regenerativa “, Brevet OSIM, 117972, Int.Cl C21D9P00)

B16. B.H.ORBAN, G.D.BUNEA, L.MOLDOVAN, I.V.ANTONIAC, D.GHEORGHIU, A.SEMENESCU, “HIP TOTAL PROSTHESIS FEMUR COMPONENT COMPRISES A PISTOL SHAPE HIGH RELIABILITY SWALLOWTAIL SHAPE GRATING WITH 6 TO 9 WINDOWS IN IT”, Patent number:Ro117890-B, Derwent primary accession no.2002-758213, ISI Web of Knowledge ( Orban H.B., Bunea D.G., Moldovan L., Antoniac V.I., Gheorghiu Doina, Semenescu A.-Componentă femurală pentru proteză totală de şold- Brevet OSIM, 117890, Int.Cl A 61F2 / 36 ).

B17. A. SEMENESCU, D.G.BUNEA, C RANEA, V.I.ANTONIAC, F.MICULESCU:” DISPOZITIVE DE SUSŢINERE ŞI GLISARE A UŞILOR” Dosar OSIM, A/00474/17.02.2002) .

B18. S.PIVNICERU, A.SEMENESCU, R.PIVNICERU, P.KOVECSI, “LIME FABRICATOR INCREASING PRODUCT QUALITY INCLUDES A VERTICAL KILN WITH SPECIAL SUPERHEATING BURNERS AND AN EXPANSION COMPENSATOR” Patent number:Ro115755-B, Derwent primary accession no.2000-449844, ISI Web of Knowledge (S. Pivniceru, A. Semenescu, R. Pivniceru , P. Kovecsi: “Instalatie pentru obtinerea varului”, Brevet OSIM, nr. 115755 B, 2000)

B19. S.PIVNICERU, A.SEMENESCU, P.KOVECSI, R.PIVNICERU “GRANULATE HEATER-BURNER GIVING CIRCULATORY FLOW CONSISTS OF A FLUID FUEL LANCE AND AIR AND COMBUSTION GASES INPUT WITH REGULATORS” Patent number:Ro115754-B,Derwent primary accession no.2000-449843, ISI Web of Knowledge (S. Pivniceru, A. Semenescu, P. Kovecsi, R. Pivniceru: “Arzator pentru incalzit material granular”, Brevet OSIM, nr. 115754 B, 2000.)

B20. A.SEMENESCU, L.A.VALCEANU ,“BURNER SYSTEM-FOR OVENS WITH REDUCED OXIDATION”, Patent number:Ro115066-B1,Derwent primary accession no.2000-221230, ISI Web of Knowledge (A. Semenescu, L. Valceanu, M. Coliu: “Instalatie de ardere pentru cuptoare de incalzire cu oxidare redusa“, Brevet OSIM, nr. 115066/B1, 1997.)

B21. A.SEMENESCU, P.KOVECSI, R.PIVNICERU, R.STANESCU, C.PETCU, C.DONIGA, S. ANTONOVICI, N.GHIRTOI, I.GHINOIU, P.NEDELCU, “AGGLOMERATOR HEATER WITH ROTARY LAMELLAR BURNER-MAINTAINS MAXIMUM AGGLOMERATION TEMPERATURE AND INCREASES FUEL ECONOMY”, Patent number:Ro108728-B1,Derwent primary accession no.1995-192005, ISI Web of Knowledge (A. Semenescu, R. Pivniceru, P. Kovecsi, R. Stanescu, C. A. Petcu, C. Doniga, S. Antonovici, N. Ghirtoi, I. Ghinoiu, P. Nedelcu: “Focar de aprindere cu arzator lamelar rotativ“, Brevet OSIM, nr. 108728 B1, 1994.)

http://apps.webofknowledge.com/full_record.do?product=UA&search_mode=MarkedList&qid=34&SID=T2FP5oTexBAqHw6OqgI&page=1&doc=9&colName=DIIDW









B22. A.SEMENESCU, L.VALCEANU,”HOT PREHEATER GAS BASED CONTINOUS REGENERATIVE COMBUSTOR-HAS LABYRINTH ENCLOSING MULTIPLE RADIAL COMPARTMENTS PACKED WITH ALUMINA SPHERES”, Patent number:Ro108730-B1,Derwent primary accession no.1995-192007, ISI Web of Knowledge (A. Semenescu, L. Valceanu: “Procedeu si instalatie de ardere regenerativa continua“, Brevet OSIM, nr. 108730B1, 1994.)

B23. A.SEMENESCU, L.VALCEANU,”EXPLOSION PROOF REGENERATIVE COMBUSTOR-GIVES SUSTAINED BURNING VIA HIGH TEMP, BURNER AND TWO CYLINDERS PACKED WITH CERAMIC SHERES”, Patent number:Ro108729-B1,Derwent primary accession no.1995-192006, ISI Web of Knowledge (A. Semenescu, L. Valceanu: “Instalatie de ardere regenerativa“, Brevet OSIM, nr. 108729 B1, 1994.)

B24. A.SEMENESCU, R.STANESCU, R.PIVNICERU, C.PETCU, P.KOVECSI ,”AGGLOMERATOR HEARTH FOR IGNITING WORK-HAS A REFRACTORY LINED METAL CHAMBER WITH TOP BURNERS”, Patent number:Ro107028-B1,Derwent primary accession no.1994-309085, ISI Web of Knowledge (A. Semenescu, R. Stanescu, R. Pivniceru, C. Petcu, P. Kovecsi: “Focar pentru aglomerare“, Brevet OSIM, nr. 107028, 1989)

B25. B.NICULESCU, A.SEMENESCU, “COMBUSTION GAS TRAP INCREASING METAL MELTING ECONOMY-INCLUDES HEAT RECUPERATION ASSEMBLY AND COMBUSTOR FOR METAL CHARGE TREATMENT”, Patent number:Ro110865-B1,Derwent primary accession no.1997-040972, ISI Web of Knowledge( A. Semenescu, B. Niculescu: “Instalatie de captare gaze arse“, Brevet OSIM, nr. 110365, 1989)

B26. A.SEMENESCU, R.PIVNICERU, “RECUPERATING RADIANT TUBE WITH HEAT TUBES –FOR COMBUSTION GAS AND FUEL ECONOMY, WITH PILOT BURNER AND REFRACTORY LINED METAL CASING”, Patent number:Ro106287-B1,Derwent primary accession no.1994-246840, ISI Web of Knowledge (A. Semenescu, R. Pivniceru: “Tub radiant recuperativ cu tuburi termice“, Brevet OSIM, nr. 106287 B1, 1989).

B27. M. SEMENESCU, C. SARBU, A.SEMENESCU, R. PIVNICERU, “PREHEATER FOR SCRAP IRON IN STEEL-MAKING ELECTRIC ARC FURNACE-INCLUDES METAL SUPPORT WITH MAIN AND PILOT BURNERS, AND HAS COMBUSTED GAS HEAT RECUPERATION”, Patent number:Ro105114-A,Derwent primary accession no.1993-326131, ISI Web of Knowledge (M. Semenescu, C. Sârbu, A. Semenescu, R. Pivniceru, C. Petcu: “Instalatie de preincalzire a fierului vechi“, Brevet OSIM, nr. 105114, 1989)

B28. G.MANGARU, A.SEMENESCU, “SPECIALLY PROFILED HYDRAULIC TIPPER-CONSISTS OF TRACK MOUNTED MOBILE PLATFORM OF CONTROLLED TRAJECTORY ARCHIMEDEAN SPIRAL SHAPE”, Patent number:Ro103874-A,Derwent primary accession no.1993-173455, ISI Web of Knowledge (G. Mangaru, A. Semenescu: “Mecanism de basculare cu profil special“, Brevet OSIM, nr. 103874, 1989.)

B29. A.SEMENESCU, G.MANGARU, R.PIVNICERU, “PREHEATER FOR STEEL-MAKING ELECTRIC ARC FURNACE CHARGE-INCLUDES METAL SHELL WITH REFRACTORY MATERIAL, AND REGENERATIVE FLAME-TYPE COMBUSTION UNIT FOR FUEL-FEED REVERSAL”, Patent number:Ro105113-A, Derwent primary accession no.1993-326130, ISI Web of Knowledge

B30. R.PIVNICERU, A.SEMENESCU, I.OPRESCU, F.GHEORGHIU, “REMOVABLE CONTAINER WITH HEATING FOR BAKING STEEL INDUSTRY ELECTRODES-COMPRISES ELEMENTS IN ROWS AT VARIOUS HEIGHTS WITH FORGED WINGS PREVENTING PACKING MATERIAL RUNNING ETC.”, Patent number:Ro100388-A,Derwent primary accession no.1991-205595, ISI Web of Knowledge (R. Pivniceru, A. Semenescu, I. Oprescu, F. Gheorghiu: “Caseta demontabila cu fante pentru coacerea electrozilor siderurgici“, Brevet OSIM, nr. 100388, 1988)

B31. A.VOICU, R.PIVNICERU, C.PETCU, A.SEMENESCU, A.NESTOR, “PREHEATER FOR FLUIDS USED IN CUPOLA HEATING-CONSISTS OF AIR AND GASEOUS FUEL SUBASSEMBLIES WITH HEAT EXCHANGER”, Patent number:Ro97357-A, Derwent primary accession no.1990-056659, ISI Web of Knowledge (A. Voicu, S. Banu, R. Pivniceru, C. Petcu, A. Semenescu, A. Nestor: “Instalatia pentru preincalzirea fluidelor utilizate la incalzirea cuptoarelor“, Brevet OSIM, nr. 97357, 1987.)

B32. C. Leancu, A. Filip, G. Isac, E. Oprea, G. Ristea, R. Paraschiv, R. Pivniceru, C. Petcu, A. Semenescu: “DISPOZITIV DE EVACUARE A COCSULUI“, Brevet OSIM, nr. 96902, 1987.

B33. P. Teoreanu, P. Botoran, R. Pivniceru, C. Petcu, A. Semenescu, A. Filip, C. Leancu: “CUPTOR DE CALCINARE CU VATRA ROTITOARE“, Brevet OSIM, nr. 95723, 1986.

60 PROIECTE DE CERCETARE-DEZVOLTARE-INOVARE Pi- Proiecte de cercetare prin competiţie pe bază de contract / grant internaţionale Pi1. Interreg Europe project application NMP-REG, Acronym: NMP-REG, Reference number: PGI00023, Submission date/time:

30/07/2015 13:34•NMP-REG - Delivering NMP to REGional manufacturing---project proposal for 1st INTERREG EUROPE call --- NMP REG deals with INTERREG Axis I Objective 1.2: “Improve the implementation of regional development policies and programmes, in particular programmes for Investment for Growth and Jobs and, where relevant, European Territorial Cooperation programmes, that support the delivery of innovation by players in regional innovation chains in areas of “smart specialisation” and innovation opportunity” - Romanian coordinators:Iulian Vasile Antoniac and Augustin Semenescu (Contract individual de munca UPB nr 1205 C/ 31.05.2016) Date generale legate de primul apel INTERREG EUROPE: 211 de proiecte depuse, din care 75 aveau beneficiari romani; 9 Lead Partner; 66 de proiecte au avut punctajul necesar si au fost aprobate insumand 89,4 milioane euro FEDR si 0,65 milioane euro fonduri norvegiene; 24 de proiecte cu parteneri romani dintre care doi Lead Partner aprobate, pozitionand Romania pe locul 7 din 30 dupa numarul de beneficiari. (http://www.interregeurope.eu/ ) (http://www.mdrap.ro/dezvoltare-regionala/-4970/-7572/-3506 )

Pi2. ENEX nr 2014-1DE02-KA202-001635- Expert in Nanotechnology Exploitation - Coordinator Dumitru Titi CICIC , UPB, IMST(2016-2017 -- Contract individual de munca UPB nr 837 C/ 31.03.2016)

Pi3. POSDRU 87/1.3/S/64227-- Programul Operaţional Sectorial pentru Dezvoltarea Resurselor Umane 2007 – 2013, Axa prioritară 1 „Educatia şi formarea profesională in sprijinul creşterii economice şi dezvoltării societăţii bazate pe cunoaştere”, Domeniul major de intervenţie 1.3 - „Dezvoltarea resurselor umane din educaţie şi formare” TITLU PROIECT: „FORMAREA PERSONALULUI DIDACTIC DIN

http://www.interregeurope.eu/

http://www.mdrap.ro/dezvoltare-regionala/-4970/-7572/-3506


ÎNVĂŢĂMÂNTUL SECUNDAR (ISCED 2-3) ÎN VEDEREA UTILIZĂRII TEHNOLOGIEI INFORMAŢIEI ŞI A INSTRUMENTELOR E-LEARNING ÎN ACTIVITATEA DIDACTICĂ”, 2010-2013

Pi4. POSDRU/86/1.2/S/56872 Proiect cofinanţat din Fondul Social European prin Programul Operaţional Sectorial pentru Dezvoltarea Resurselor Umane 2007 – 2013, Axa prioritară 1 „Educaţia şi formarea profesională în sprijinul creşterii economice şi dezvoltării societăţii bazate pe cunoaştere”, Domeniul major de intervenţie 1.2. „Calitate în învățământul superior”, TITLUL PROIECTULUI: „COMUNITATE VIRTUALĂ INTERUNIVERSITARĂ PENTRU STIINTĂ, TEHNOLOGIE, INOVARE șI VALORIFICARE A PROPRIETĂTII INTELECTUALE.”, 2010-2013

Pi5. FP7-NMP-2007-LARGE-1, Collaborative Project; Large-scale integrating project; Work programme topics addressed: NMP-2007-2.3-1Proiect nr.293104: “NOVEL BIOFUNCTIONAL POLYMER SCAFFOLDS AND TECHNIQUES FOR THE REGENERATION AND REPAIR OF DEGENERATE INTERVERTEBRAL DISC”, acronym Disc Regeneration; coordinating person: Prof. Luigi Ambrosio; responsabil partener 10/UPB-CEMS; 2008-2012

Pi6. Program ECO-NET 2008, EGIDE- Proiect nr.18918RG/2008: “EVOLUTION DES PROPRIETES MICROSTRUCTURALES ET MECANIQUE DE FILMS MINCES NI-P DESTINES A DES APLICATIONS ELECTRONIQUES”, finantare Franta. Parteneri: Franta, Romania si Belarus.

Pi7. FP6-EC MARIE CURIE ACTIONS - „ MOBILITY OF RESEARCHERS BETWEEN ACADEMIA AND INDUSTRY”- 2004 -2006. Members of consortium: Rolan Sommer (AT), Filip Callewaert (BE), France Dantin (FR), Martin Hynes (IE), Maria Rimini Doring (DE), Ciro Franco (IT), Jesmond Xuereb (MT) A. SEMENESCU (RO), A.Meghea (RO), Joseph M Suris (ES), Mary Ritter (UK), Goran Blomqvist (SE), s.a

Pi8. FP6-EC- MARIE CURIE HOST FELLOWSHIPS FOR THE TRANSFER OF KNOWLEDGE (TOK) DEVELOPMENT HOST SCHEME, HUMAN RESOURCES AND MOBILITY (HRM) ACTIVITY-MARIE CURIE ACTIONS “ToK – MINATEC – EST” 2004-2006

Pi9. FP6-EC - PROJECT SECIFIC SUPPORT ACTIONS:ROMANIAN INTEGRATION IN THE EUROPEAN RESEARCH AREA (ROINTERA). Coordonator UPB: AUGUSTIN SEMENESCU ( conf. scrisoare Academia Romana nr 174 FGF, din data de 28.11.2005, semnata de: Prof.Florin FILIP-Vicepresedinte Academia Romana - Coordonator proiect)

Pi10. “FOCUS – FOCUSING ON ENHANCEMENT OF CENTRAL AND EAST EUROPEEAN YOUNG RESEARCHERS’ INVOLVMENT IN FP6 “-Grant for the year 2003 under article A-3022 of the general budget of the european communities Support for European integration activities organised by the academic world ( A 9307/ 03/RO-5 )

Pi11. “PROMOTING EUROPEAN INTEGRATION IDEALS AMONG YOUNG RESEARCHERS” -Grant for the year 2001 under article A-3022 of the general budget of the european communities Support for European integration activities organised by the academic world

Pi12. EU-SSA-FP7-THE SEVENTH FRAMEWORK PROGRAMME(2007-2013), Human Resources and Mobility Activity-”Researchers’ Night 2007” Title: “RESEARCHERS’ NIGHT IN ROMANIA”, Acronym: RENIROM, WP Managers: Maria MIHALY, Aurelia MEGHEA, Augustin SEMENESCU, Horia IOVU, Iulia MIHAIL, Ovidiu ALUPEI; Daniela BOGDAN;Date of proposal: 10 apr. 2007

Pi13. EU-SSA-FP6-THE SIXTH FRAMEWORK PROGRAMME(2002-2006), Human Resources and Mobility Activity- Mobility13 ”Researchers’ Night 2006” Title: “RESEARCHERS’ NIGHT IN ROMANIA”, Acronym: RENIROM, WP Managers: Liane Gloria Raluca STAN, Aurelia MEGHEA, Horia IOVU, Augustin SEMENESCU, Iulia MIHAIL, Ovidiu ALUPEI; Daniela BOGDAN, Cezar BALESCU;Date of proposal: 2006

Pi14. EU-SSA-FP6-THE SIXTH FRAMEWORK PROGRAMME(2002-2006) -- "EPISTEP" - Enhanced Participation of SMEs in IST European Technology Platforms, Coordonator proiect: Academia Romana, Dr.ing. ILIE Romeo, 2006-2007".

Participant la Proiecte bilaterale Pi15. Ioana, A., (responsabil), Semenescu, A., BUSINESS ECONOMIC, Proiect Erasmus Università DeglI Studi di Torino (I-TORINO01), Torino,

Italy, 2013-2014. Pi16. “Promotion of ROmanian SMEs through Business and Innovation Support NETwork –PRO SME BISNET”, proiect "Competitivity and

Innovation Programme - CIP" al Uniunii Europene Pi17. Project NoE: Implants and Medical Devices for Human and Biological Applications (BioMatEURes). Coordonator proiect : Prof.Daniel

BUNEA (2003) Pi18. Programul “CORINT Sevicii-Sprijinirea participarii comunitatii stiintifice romanesti la Programe Europene si la alte Programe

Internationale”-Program finantat de ANSTI,in cadrul Planului national multianual de cercetare dezvoltare pe perioada 2000-2003 Pi19. Proiect Complex “CORINT SUPORT-Sprijinirea participarii comunitatii stiintifice romanesti la Programul Cadru 5 si la alte

Programe Europene”-Program finantat de ANSTI,in cadrul Planului national multianual de cercetare dezvoltare pe perioada 2000-2003 Pi20. Project NoE: Microsysrems, nanodevices and materials for human-implantable sensors and actuators (HIMNET). Coordonator proiect

: Prof.Romano Gianenetti, Pontificia Comillias Unversity (Madrid, Spain) (2003) Pi21. EU-SSA-FP6-THE SIXTH FRAMEWORK PROGRAMME(2002-2006) -- "EPIST" - Enhanced participation in IST projects related to

eHealth and eInclusion, Coordonator proiect: Academia Romana, Dr.ing. ILIE Romeo, 2005-2006 Pi22. EC RFSR-CT-2006-00028, “CONNECTIONS OF STEEL AND COMPOSITE STRUCTURES UNDER NATURAL FIRE CONDITIONS”,

Coordinator Mr. ZHAO, CTICM, BELGIUM Pi23. EC RFSR-CT-2006-00031, “ HIGT STRENGHT STEEL TOWER FOR WIND TURBINES ”, Coordinator Mr. VELJKOVIC,LTU, SWEDEN Pi24. Projet LEONARDO DA VINCI /RO2000/85066/EX ” CLEAN ENERGY “-,en collaboration avec l’Universite Paul SABATIER - Toulouse-

FRANCE. Coordonator proiect : Prof.Neculai GALAN. (2001-2003) Pi25. EUREKA//: “New Applied Technologies of Hypervision for Environment and Security” (NATHES / EU 1669), 1997 – 1999 Pi26. EUREKA//: “Emission Monitoring System”, (EU 1617-EMS), 1997 - 1999/Parteneri:VSP / Olanda, IPA / Romania, Pn- Proiecte de cercetare prin competiţie pe bază de contract / grant naţionale Proiecte în calitate de director :


Pn1. UPB-CEMS, Nr. crt. 127 / 16.08.2004, PLANUL NAŢIONAL PENTRU CERCETARE-DEZVOLTARE: PROGRAMUL PNCDI / INFOSOC – C6: „CREAREA UNUI SISTEM NATIONAL INTEGRAT DE INFORMARE IN DOMENIUL METALURGIEI”

Pn2. UPB-CEMS, Nr. crt. 107/12.11.2003, PLANUL NAŢIONAL PENTRU CERCETARE-DEZVOLTARE: PROGRAMUL PNCDI / INFOSOC – C4: „MANAGEMENTUL SI DEZVOLTAREA UNUI SUPORT INTEGRAT MULTIMEDIA PENTRU PERSOANE CU HANDICAP LOCOMOTOR”; Acronim:SIMPHLO

Pn3. Grant ANSTI (2000-2002) Cod. MEC: 2531 “TEHNOLOGII DE ARDERE ECONOMICO-ECOLOGICE APLICATE INSTALATIILOR DE ARDERE REGENERATOARE CU BILE CERAMICE „

Pn4. Contract 20/2000 CEMS-UPB-Elsid Titu:”STUDII SI CERCETARI PRIVIND MODERNIZAREA, ECOLOGIZAREA SI FIABILIZAREA CUPTOARELOR DE COACERE A PRODUSELOR CARBONICE”

Pn5. Contract 14 / 1996 CEMS - U.P.B. - I.C.E.M. S.A. Bucuresti: “OPTIMIZAREA SISTEMULUI SI A REGIMULUI DE APRINDERE A INCARCATURII MASINILOR DE AGLOMERARE “

Pn6. Contract 4001, Tema B78 U.P.B.-F.S.I.M.-Ministerul Invatamantului (D.G.I.S.C.S.U.): “MODEL MATEMATIC AL TRANSFERULUI TERMIC IN CUPTOARE CU ARZATOARE REGENERATIVE”.

Faza 1995: “MODELAREA MATEMATICA A CUPTOARELOR DE INCALZIRE DOTATE CU ARZATOARE REGENERATIVE” Faza 1996: “PROGRAME SI SCHEME DE CONDUCERE CU CALCULATORUL PENTRU CUPTOARE DE INCALZIRE CU

ARZATOARE REGENERATIVE” Pn7. Contract 38/1995 CEMS-U.P.B.-I.C.E.M. S.A. Bucuresti: ”MODELAREA MATEMATICA A PROCESULUI DE APRINDERE A

INCARCATURII MASINII DE AGLOMERARE”. Pn8. Contract 3/1994 CIMR-U.R.B. - I.C.E.M. S.A. Bucuresti: “MODELAREA MATEMATICA A PROCESELOR DE PREINCALZIRE A

INCARCATURII CUPTOARELOR CU ARC ELECTRIC”. Pn9. Contract 59-91-6(1794)/1991, UPB-M.Î.S.: ”MODELAREA MATEMATICA A PROCESELOR TERMICE LA FABRICAREA

ELECTROZILOR SIDERURGICI ÎN VEDEREA CONDUCERII PE CALCULATOR”. Faza 1993: “TESTAREA MODELULUI PE CALCULATOR: SIMULAREA PROCESULUI, CORECTAREA MODELULUI, STABILIREA PRECIZIEI, ETC.” Faza 1994: “PROIECTAREA SCHEMEI DE AUTOMATIZARE CONVENTIONALA COMPLETA SI A SCHEMEI DE CONDUCERE CU CALCULATORUL A CUPTORULUI DE COACERE”

Pn10. Proiect IPROMET nr. 58142 / 1990. I.P.R. Pleasa Ploiesti. Cuptor de ars teci de termocuple. Pn11. Proiect IPROMET nr. 57642 / 1989. I.P.R. Ocna Mures. Cuptor tunel de ardere produse refractare, T=1650oC. Pn12. Proiect IPROMET nr. 56422 / 1989. I.C.E.M. Bucuresti. Cuptor cu vatra pasitoare Sv=17,3 m2. Pn13. Proiect IPROMET nr. 54713 / 1988. I.C.E.M. Bucuresti. Cuptor electric cu vatra mobila Sv=6,3 m2, Tmax=100oC. Pn14. Proiect IPROMET nr. 56519 / 1988. C.I.I.Ch. Craiova. Cuptor tunel cu vagoneti, T=1800 oC. Pn15. Proiect IPROMET nr. 56809 / 1987. C.O.S. Targoviste. F.B.B. - Extindere. Cuptor electric de mentinere (T=650 oC). Pn16. Proiect IPROMET nr. 56519 / 1988. C.I.I.Ch. Craiova. Cuptor tunel cu vagoneti, T=1800 oC. Pn17. Proiect IPROMET nr. 54713 / 1988. I.C.E.M. Bucuresti. Cuptor electric cu vatra mobila Sv=6,3 m2, Tmax=100oC. Pn18. Proiect IPROMET nr. 56422 / 1989. I.C.E.M. Bucuresti. Cuptor cu vatra pasitoare Sv=17,3 m2. Pn19. Proiect IPROMET nr. 56519 / 1988. C.I.I.Ch. Craiova. Cuptor tunel cu vagoneti, T=1800 oC. Pn20. Proiect IPROMET nr. 56809 / 1987. C.O.S. Targoviste. F.B.B. - Extindere. Cuptor electric de mentinere (T=650 oC). Pn21. Proiect IPROMET nr. 54681 / 1987. I.C.E.M. Bucuresti. Sectia Ti-Zr si aliaje. Cuptor de incalzire pentru forja, Sv=2x10m2. Pn22. Proiect IPROMET nr. 56018 / 1987. I.P.R. Rasaritul Brasov. Cuptor pentru produse refractare, T = 1800 oC. Pn23. Proiect IPROMET nr. 59995 / 1986 - C.O.S. Targoviste. F.B.B. - Extindere. Cuptor de incalzire cu 2 camere Sv=2x10 m2, T = 1000 oC. Pn24. Proiect IPROMET nr. 52899 / 1986 - C.M. Campia Turzii. Cuptor electric de uscat pulbere de fier. Pn25. Proiect IPROMET nr. 54488 / 1986 - I.P.C. Slatina. Cuptor cu vatra rotativa de calcinare cocs cu structura orientata. Pn26. Proiect IPROMET nr. 52899 / 1985 - C.M. Campia Turzii. Cuptor cu 2 camere de incalzire feroaliaje, dotat cu arzatoare regenerative. Pn27. Proiect IPROMET nr. 59995 / 1985 - C.O.S. Targoviste. F.B.B. - Extindere. Cuptor de incalzire cu 2 camere Sv=2x10 m2.

Proiecte în calitate de colaborator cercetare:

Pno1. NOI MATERIALE VITROASE MAGNETO-OPTICE CU APLICATII IN OPTOELECTRONICA (MOVITOPT) PCCA II 186/2012, Program UEFISCDI Parteneriate in domenii prioritare, nr.intern CH 40-12-07, Director proiect UPB prof.dr.ing. Adrian Volceanov, Pozitia in proiect: membru in echipa de cercetare.

Pno2. Proiect POSDRU/161/2.1/G/137369--" UN STUDENT CONSILIAT ȘI ORIENTAT PROFESIONAL, UN TÂNĂR PREGĂTIT PENTRU PIAȚA MUNCII - CONPROF", Manager proiect UPB (partener): prof.dr.ing. Adrian Volceanov (proiectul este coordonat de IPA).Pozitia in proiect : ETS (expert pe Termen Scurt).

Pno3. EVALUAREA CAPACITĂŢII DE INOVARE ŞI PROMOVAREA SPIRITULUI ANTREPRENORIAL ÎN UNIVERSITATEA POLITEHNICA BUCUREŞTI – ECIProSA UPB, POS CCE, O2.2.4 : Intarirea capacitatii administrative, Nr. SMIS CSNR: 2680

Pno4. PROGRAMUL 4 "PARTENERIATE IN DOMENIILE PRIORITARE" ; Domeniul 7, Contract nr: 72-192/ 01.10.2008 ; 2008-2011, „IMPLANTE RESORBABILE UTILIZATE IN ARTROSCOPIE REALIZATE DIN BIOMATERIALE BIOMIMETICE" Acronim proiect: AURABIOMAT, Contractor: UNIVERSITATEA POLITEHNICA BUCURESTI-CENTRUL DE BIOMATERIALE

Pno5. PROGRAMUL 4 "PARTENERIATE IN DOMENIILE PRIORITARE"; Domeniul 4„ Contract nr: 42-132/01.10.2008; 2008-2011, “DISPOZITIV MEDICAL PENTRU TRATAREA AFECTIUNILOR ARTICULARE BAZAT PE NANOMATERIALE SI EFECTELE CAMPULUI MAGNETIC", Acronim proiect: ARTROMAG, Contractor Spitalul Clinic Colentina Bucuresti

Pno6. Programul INOVARE-PROIECTUL nr. 63/ 25.09.2007, BATERIE SANITARA MULTIFUNCTIONALA CU CONTROL DIGITAL PRIN SENZORI DE PROXIMITATE AI PARAMETRILOR DE FUNCTIONARE


Pno7. Programul INOVARE-PROIECTUL nr. 79/ 25.09.2007, INSTALATIE SI TEHNOLOGIE DE TURNARE IN VID A REPERELOR MECANICE DIN ALIAJE DE ALUMINIU ALE PRODUSULUI MIRA REFLEX

Pno8. Programul INOVARE-PROIECTUL nr. 284/ 05.11.2008 ,,MANIPULATOR TELECOMANDAT GIROSTABILIZAT CU SISTEM DE OCHIRE OPTOELECTRONIC INTEGRAT PENTRU ARMAMENTUL DE INFANTERIE” Acronom MATEO Durata 2008-2011

Pno9. Programul INOVARE-PROIECTUL nr. 283/ 05.11.2008, ,,INSTALAŢIE SOLARĂ HIBRIDĂ DE ÎNALT RANDAMENT PENTRU UZ CASNIC, CLIMATIZARE ŞI FURNIZAREA APEI CALDE MENAJERE” Acronom SOLIR Durata 2008-2011

Pno10. CEEx MODUL III P-INT-VIZ “INCREASING THROUGH NANOSCIENCE THE VISIBILITY OF UNIVERSITY POLITEHNICA BUCHAREST IN CONTEXT OF THE 7TH EUROPEAN RESEARCH FRAMEWORK PROGRAMME LAUNCHING”- NANOMUPB, Responsabil de contract din UPB Conf. dr. ing. Alexandru Marin, 2006.

Pno11. CEEx MODUL III P-INT-VIZ SISTEM EXPERT DE DETERMINARE A POTENTIALULUI DE CERCETARE PENTRU UNITATILE ROMANESTI SI DE INSTRUIRE A ACESTORA IN PERSPECTIVA PARTICIPARII LA PROGRAMUL FP7 Responsabil de contract din UPB Conf. dr. ing. Alupei-Cojocariu Ovidiu, 2005

Pno12. Nr Contract: 33380/29.06.2004,Nr. Tema: 19, COD CNCSIS: 53,Titlul grantului: ”DEZVOLTAREA SI IMPLEMENTAREA UNOR SOLUTII CONSTRUCTIVE NOI SI TEHNICI MODERNE DE CONDUCERE A INSTALATIILOR DE OBTINERE A ALUMINIULUI PRIN ELECTROLIZA” Titlul fazei 2003: “Analiza factorilor constructivi si functionali ai instalatiilor de electroliza in vederea stabilirii posibilitatilor de conducere secventiala cu automat programabil’’ Responsabil de contract din UPB: Prof.dr.ing.Cezar Balescu;Titlul fazei 2004: “Realizarea procedurilor de conducere pe fluxuri si subfluxuri ale celulei de electroliza (pe cuva de electroliza si pe ansamblu instalatiei inclusiv masina multifunctionala de deservire a celulelor de electroliza” Responsabil de contract din UPB: Prof.dr.ing.Cezar Balescu;

Pno13. Nr. crt. 101 / 2003, Programul national de finantare: INVENT: „COMPONENTA FEMURALA A PROTEZEI TOTALE DE SOLD”, Responsabil de contract din UPB: S.L.ing. Iulian Antoniac;

Pno14. PNCDI, Contract BIOTEH, nr. 82./2001, «MODELAREA SI CUANTIFICAREA INTERACTIILOR BIOMATERIALELOR SI IMPLANTELOR CU MEDIUL GAZDA SI/SAU TESUT IMPLANTAT PRIN METODE AVANSATE «, responsabil prof. Bunea Daniel, executant UPB-CEMS, beneficiarMEC-USAMV, 2001;

Pno15. PNCDI, Contract INFOSOC, nr.18/2001, «CENTRU VIRTUAL DE SELECTIE A BIOMATERIALELOR «, responsabil prof.Târcolea Mihai, executant UPB-CEMS, beneficiarMEC-ICI, 2001;

Pno16. PNCDI, Contract RELANSIN, nr.1473/2001, «CENTRU DE BIOMATERIALE «, responsabil prof. Zamfir Simona, executant UPB-BIOMAT, beneficiar MEC-AMCSIT, 2001

Pno17. PROIECTUL COMPLEX CORINT (www.dsp.pub.ro/corint/PC5.html) responsabil prof.Paul Cristea, 2002 Pno18. PROIECTUL COMPLEX CORINT SUPPORT (www.dsp.pub.ro/corintsuport.html) responsabil prof.Paul Cristea, 2000; Pno19. CERCETARI PRIVIND CRESTEREA FIABILITATII INSTALATIILOR METALURGICE PRIN MODELAREA PARAMETRILOR

TEHNOLOGICI SI SIMULAREA PROCESELOR SPECIFICE, nr. 355 / 2000, responsabil prof. Mirea Vasile; Pno20. CONDUCEREA COMPLEXA, ECOLOGIZAREA SI FIABILIZAREA SISTEMELOR DE PRODUCTIE METALURGICE, grant Banca

Mondiala 103, nr. 26383 / 09.02.2000, responsabil prof. Oprescu Iulian; Pno21. Contract nr. 39 / 1998, "STUDII SI CERCETARI EXPERIMENTALE PRIVIND INFLUENTA DEFORMARII PLASTICE SI A

TRATAMENTULUI TERMIC IN FLUX ASUPRA CARACTERISTICILOR MECANICE, TEHNOLOGICE SI DE EXPLOATARE A SARMELOR ZINCATE LA DUCTIL-S.A. BUZAU". Beneficiar DUCTIL-S.A. Buzau

Pno22. Contract nr. 44 / 1998 (01.12.1998), "STUDIUL CARACTERISTICILOR STRUCTURALE SI A PROPRIETATILOR ALIAJULUI 20/7". Beneficiar ALPROM Slatina.

Pno23. Contract nr. A 11 (711 / 96), act aditional 545 / 1997 + act aditional 843 / 1998. Tema: "STUDII SI CERCETARI EXPERIMENTALE PRIVIND OPTIMIZAREA PROPRIETATILOR UNOR ALIAJE AVANSATE CU BAZA DE ALUMINIU UTILIZATE IN CONSTRUCTIA DE MASINI".(Faza I / 1996 : "Studii si cercetari experimentale privind stabilirea si optimizarea legaturilor compozitie chimica - structura - proprietati pentru aliajele de tip Al-Mg-Si utilizate in construictia de masini".Faza II / 1997: "Studii si cercetari experimentale privind optimizarea caracteristicilor tehnologice si de exploatare a unor aliaje utilizate in constructia de masini".Faza III / 1998 : "Studii si cercetari experimentale privind alierea si microalierea aliajelor din sistemul Al-Zn-Mg in vederea optimizarii caracteristicilor tehnologice si de exploatare ale acestora".

Pno24. Contract nr. 355/A 2, act aditional 408/1998/I (Faza a I-a, iunie,1998, M.C.T " STABILIREA FUNCTIILOR PENTRU PACHETUL DE PROGRAME SI PENTRU SISTEMUL DE OPERARE".Faza a II-a, noiembrie,1998, M.C.T " Testarea pachetelor de programe in vederea validarii si utilizarii lor in conditiile specifice proceselor metalurgice".)

Pno25. Contract nr. 355/A 4, 1997, M.C.T." ELABORAREA APARATULUI MATEMATIC DESTINAT MODELÃRII PROCESELOR METALURGICE SPECIFICE".

Pno26. Contract 355/96 - M.C.T. “CERCETARI PRIVIND CRESTEREA FIABILITATII INSTALATIILOR METALURGICE PRIN MODELAREA PARAMETRILOR TEHNOLOGICI SI SIMULAREA PROCESELOR SPECIFICE”.(Faza a-I-a: Studii si cercetãri privind identificarea principalilor parametrii tehnologici cu un grad sporit de influenta asupra proceselor metalurgice specifice .Faza a-II-a: Clasificarea si verificarea principalilor parametrii tehnologici ai proceselor specifice metalurgice)

Pno27. Contract 258/94 - M.C.T. A 5 - 12.1 “CERCETARI PRIVIND POSIBILITATEA DE VALORIFICARE A MATERIALELOR REFOLOSIBILE LA FABRICAREA ELEMENTELOR DE FRICTIUNE”.

Pno28. Faza 94: “STUDII PRIVIND POSIBILITATILE DE OBTINERE A PULBERILOR DIN DESEURILE REZULTATE DE LA PRELUCRAREA PRIN ASCHIERE A OTELURILOR”.

Pno29. Faza I /95: “STABILIREA CONDITIILOR DE PRESARE SI SINTERIZARE A PULBERILOR PENTRU FABRICAREA MATERIALELOR DE FRICTIUNE”.

Pno30. Faza II /95: “CARACTERIZAREA DE LABORATOR PRIVIND COMPONENTELE DE FRICTIUNE REALIZATE DIN PULBERI DESEU A OTELURILOR”.

Pno31. Faza 96: “CERCETARI PRIVIND MATERIALELE REFOLOSIBILE CE SUNT VALORIFICATE IN INDUSTRIA CONSTRUCTIILOR DE MASINI”.

http://www.dsp.pub.ro/corint/PC5.html

http://www.dsp.pub.ro/corintsuport.html


Pno32. Contract UPB-M.I.S., 1995. “CERCETARI PRIVIND DEZVOLTAREA UNOR SISTEME DE CONDUCERE INTELIGENTA A LINIILOR DE PROCESARE DIN METALURGIA NEFEROASA”.

Pno33. Contract 59-2/1993, UPB-M.I.S.: “CERCETARI PRIVIND STABILIREA DE METODOLOGII SI ECHIPAMENTE DE CONDUCERE INTEGRATA CU CALCULATOR A UNOR LINII FLEXIBILE DE FABRICATIE A PIESELOR TURNATE”.

Pno34. Contract 59-3/1992, UPB-M.I.S.: “CERCETARI PRIVIND STABILIREA DE METODOLOGII SI ECHIPAMENTE DE CONTROL INTELIGENT ASISTAT DE CALCULATOR PENTRU INSPECTIA CALITATIVA SI ANALIZA STRUCTURALA A UNOR PRODUSE SI MATERIALE METALICE”.

Pno35. Contract 59-91-6(1794)/1991, UPB-M.I.S.: ”MODELAREA MATEMATICA A PROCESELOR TERMICE LA FABRICAREA ELECTROZILOR SIDERURGICI ÎN VEDEREA CONDUCERII PE CALCULATOR”.

Pno36. Faza 1991: “STUDIU TEORETIC SI EXPERIMENTAL PRIVIND REGIMURILE TERMIC SI GAZODINAMIC ALE CUPTOARELOR CONTINUE INELARE DE COACERE A ELECTROZILOR SIDERURGICI SI INFLUENTA ACESTORA ASUPRA PERFORMANTELOR PROCESULUI DE COACERE SI ASUPRA CARACTERISTICILOR ELECTROZILOR”.

Pno37. Faza 1992: “STABILIREA MODELULUI MATEMATIC AL CUPTOARELOR DE COACERE CONTINUE INELARE” Pno38. Proiect IPROMET NC 57300 / 1989. C.S. Hunedoara. Otelaria cu convertizoare si turnare continua Pno39. Proiect IPROMET NC 5700 / 1989. C.S. Calarasi. OE1 cu T.C. Pno40. Proiect IPROMET NC 56950 / 1989. C.S. Hunedoara. OE1. Modernizarea productiei de otel si turnarea continua. Pno41. Proiect IPROMET NC 5700 / 1988. C.M. Campia Turzii. Fabrica de pulberi feroase. Pno42. Proiect IPROMET NC+PE 56780-01 / 1988. I.O. Rosu. Otelaria electrica. Extinderea capacitatii de turnare continua tagle rotunde pentru

tevi. Pno43. Proiect IPROMET NC 52640-02 / 1988. Otelaria cu convertizoare nr. 1. Dotari tehnologice in sectorul furnale-otelarii pentru elaborarea

otelurilor de cale ferata. Pno44. Proiect IPROMET PE. 56799 / 1987 (N.C. 45255-01). C.S. Galati. Otelaria cu convertizoare nr. 2 cu T.C. Zidarie refractara Pno45. Proiect IPROMET nr. 56400-199(N.C.) / 1988. Uzinexport: Miniotelarie 100000 t/an pentru Algeria Pno46. Proiect IPROMET nr. 56300-199(N.C.) / 1987. Uzinexport: Miniotelarie 125000 t/an pentru Siria. Pno47. Proiect IPROMET nr. 50100-199(N.C.) / 1987. Uzinexport: Miniotelarie 70000 t/an pentru Columbia. Pno48. Proiect IPROMET nr. 54714 / 1987. I.C.E.M. Bucuresti. Cuptor electric de tratament termic cu vatra mobila, Sv=6,3m2, Tmax=1100oC. Pno49. Proiect IPROMET nr. 54682 / 1987. I.C.E.M. Bucuresti. Cuptor electric de tratament termic cu vatra mobila, Sv=8m2, Tmax=1000 oC. Pno50. Proiect IPROMET nr. 54839 / 1987. C.S. Hunedoara. Sectia blocuri dolomitice. Instalatia de epurare gaze de la cuptoarele rotative de

sinterizare dolomita. Pno51. Proiect IPROMET nr. 54683 / 1987. C.M. Tulcea. Uzina de produse magneziene. Cuptor tunel nr. 2 R.K. Pno52. Proiect IPROMET nr. 54739 / 1986. C.S. Hunedoara. Furnal 4. Instalatii provizorii de incalzire si uscarea cauperelor si a cosului de fum. Pno53. Proiect IPROMET nr. 52895 / 1986. C.M. Campia Turzii. Instalatie de uscat recipienti. Pno54. Proiect IPROMET nr. 51777 / 1986. C.O.S. Targoviste. Cuptor rotativ. Pno55. Proiect IPROMET nr. 51800 / 1985. C.O.S. Targoviste. Cuptor electric cu arc 100 t cu evacuare prin vatra. Pno56. Proiect IPROMET nr. 51936 / 1985. M.G. Bucuresti. Cuptor electric cu arc de 50t. Panouri de racire prin vaporizare. Pno57. Proiect IPROMET nr. 51926 / 1985 C.S. Hunedoara. R.K. cuptor electric nr. 1 de 100t. Pno58. Proiect IPROMET nr. 51443 / 1985. C.M. Campia Turzii. Extindere si modernizare otelarii electrice. Instalatie de tratare a otelului in vid. Pno59. Proiect IPROMET nr. 51444 / 1985. Otelul - Rosu. Cuptor cu arc electric, 100t, cu pereti raciti cu apa. Pno60. Proiect IPROMET nr. 51443 / 1985. C.M. Campia Turzii. Cuptor cu arc electric, 100t, cu pereti raciti cu apa. Pno61. Proiect IPROMET nr. 51442 / 1985. C.O.S. Targoviste. Cuptor cu arc electric, 100t, cu pereti raciti cu apa. Pno62. Proiect IPROMET nr. 51441 / 1985. C. S. Calarasi. Cuptor cu arc electric, 100t, cu pereti raciti cu apa Pno63. Proiect IPROMET nr. 45818 / 1984. C.S. Calarasi. Otelaria cu convertizoare nr. 1 cu turnare continua. Distribuitor. F - alte lucrări de cercetare dezvoltare

Coordonator Granturi Internationale- European Commission -RESEARCH AND INNOVATION - Research Fund for Coal and Steel (RFCS) in calitate de Scientific Officer

TG8 (20017-2008)

The Research Programme of the Research Fund for Coal and Steel (RFCS) is a financial instrument of the European Union intended to support research and innovation in the sectors related to the coal and steel industry. The Programme is complementary to other European financial instruments for research and innovation, such as Horizon 2020, but it remains outside those programmes. The European Commission encourages however complementarity and synergies between the different research programmes and supports the exchange of information between projects financed under different instruments. The adoption of the Research Programme of the Research Fund for Coal and Steel is encompassed in Council Decision 2008/376/EC of 29 April 20081 (see Annex I), referred to in this document as the RFCS Legal Basis. The programme is managed by the European Commission, Directorate-General for Research and Innovation (Directorate D – Key Enabling Technologies), with the assistance of: - The Coal and Steel Committee (COSCO) - The Coal Advisory Group (CAG) and the Steel Advisory Group (SAG) - The Coal and Steel Technical Groups (TG).

(http://ec.europa.eu/research/industrial_technologies/rfcs_en.html) Pi1. EC RFSR-CT-2004-00042, “ INTEGRATED PREFABRICATED STEEL TECHNOLOGIES FOR THE MULTI-STOREY SECTOR”,

Coordinator Mr. DORING, RWTH, GERMANY

http://ec.europa.eu/research/industrial_technologies/rfcs_en.html


Pi2. EC RFSR-CT-2004-00043, “ NEW APPLICATION OF STEEL IN INSIDE COATING BUILDINGS CONSIDERING DESIGN AND ACOUSTIC CRITERIA”, Coordinator Mr. ORDIERES MERE, Univ.RIOJA, SPAIN

Pi3. EC RFSR-CT-2005-00039, “ MODERN PLASTIC DESIGN FOR STEEL STRUCTURES”, Coordinator Mr. TSCHICKARDT, RWTH, GERMANY

Pi4. EC RFSR-CT-2005-00041, “ ECONOMIC AND DURABLE DESIGN OF COMPOSITE BRIDGES WITH INTEGRAL ABUTMENTS”, Coordinator Mr. PAK, RWTH,GERMANY

Pi5. EC RFSR-CT-2007-00028, “ WORKPAK DESIGN FOR STEEL HOUSE”, Coordinator MrS. ETZEMBACH, ARCELOR RESEARH, LIEGE, BELGIUM

Pi6. EC RFSR-7210-PR/346, “ HIGH STRENGHT LONG PRODUCTS WITH IMPROVED TOUGHNESS AND FATIGUE RESISTANCE”, Coordinator Mr. FOLGARAIT, CSM, ITALY

Pi7. EC RFSR-CT-2004-00044, “ PLASTIC MEMBER CAPACITY OF SEMICOMPACT STEEL SECTIONS-A MORE ECONOMIC DESIGN”, Coordinator Mr. GRENIER, GRAZ, AUSTRIA

Pi8. EC RFSR-CT-2004-00040, “ APPLICATION OF DUPLEX STAINLESS STEEL FOR WELDED BRIDGECONSTRUCTION IN AGGRESSIVE ENVIRONMENT”, Coordinator Mrs. ZILLI, CSM,ITALY

Pi9. EC RFSR-CT-2004-00041, “ ENHANCED ECONOMY OF TUBULAR PILES BY IMPROVED BUCKLING DESIGN ”, Coordinator Mr. SAAL, UNIV KARLSRUHE,GERMANY

Pi10. EC RFSR-CT-2003-00034, “PREFABRICATED COMPOSITE BEAM TO CONCRETE FILLED TUBE OR PARTIALLY REINFORCED CONCRETE ENCASED COLUMN CONNECTIONS FOR SEVER SEISMIC AND FIRE LOADINGS”, Coordinator Mr. BURSI, UNIV TRENTO, UK

Pi11. EC RFSR-CT-2007-00033, “ HUMAN INDUCED VIBRATION OF STEEL STRUCTURES”, Coordinator Mr. HEINEMEYER, RWTH,GERMANY

Pi12. EC RFSR-CT-2007-00036, “DEVELOPMENT OF INNOVATIVE STEEL-GLASS STRUCTURES IN RESPECT TO STRUCTURAL AND ARCHITECTURAL DESIGN, Coordinator Mr. FELDMANN, RWTH,GERMANY

Pi13. EC RFSR-CT-2007-00040, “OPTIMISATION AND IMPROVEMENT OF THE FLAME STRIGHTENING PROCESS”, Coordinator Mr. FELDMANN, RWTH,GERMANY

Pi14. EC RFSR-CT-2006-00029, “ IMPROVEMENT IN STEEL UTILISATION BY RECENT BREAK-THROUGHT IN HIGHT-POWER FIBRE LASER WELDING”, Coordinator Mr. SEEFELD, BIAS,UK

Pi15. EC RFSR-CT-2006-00030, “ PREFABRRICATED ENDURING COMPOSITE BEAMS BASED ON INNOVATIVE SHEAR TRANSMISSION”, Coordinator Mr. SEIDL, SSF,GERMANY

Pi16. EC RFSR-CT-2003-00010, “ECONOMICAL AND SAFE LASER HYBRID WELDING OF STRUCTURAL STEEL”, Coordinator Mr WEBSTER, ARCELOR PROFIL, BELGIUM

Pi17. EC RFSR-CT-2004-00045, “STORAGE RACKS IN SEISMIC AREAS”, Coordinator Mrs. ROSIN, ACAI, ITALY Pi18. EC RFSR-CT-2004-00046, “ROBUST STRUCTURES BY JOINT DUCTILITY”, Coordinator Mrs. KUHLMANN, USTUTT,GERMANY Pi19. EC RFSR-CT-2004-00047 , “COMPOSITE COLUMN AND WALL SYSTEMS FOR IMPACT AND BLAST RESISTANCE”, Coordinator Mr.

HAUKE, HOCHTIEF,GERMANY Pi20. EC RFSR-CT-2004-00048, “STAINLESS STEEL IN FIRE”, Coordinator Mrs. BADDOO, SCI, BELGIUM Pi21. EC RFSR-CT-2005-00042, “FATIGUE BEHAVIOUR OF HIGH STRENGTH STEELS WELDED JOINTS IN OFFSHORE AND MARINE

SYSTEMS”, Coordinator Mrs. MECOZZI, CSM, ITALY Pi22. EC RFSR-CT-2007-00029, “ DISSEMINATION OF EUROBUILD IN STEEL”, Coordinator Mrs.POPA, ARCELOR PROFIL, LOUXEMBOURG Pi23. EC RFSR-CT-2007-00030, “DISSEMINATION OF STRUCTURAL FIRE SAFETY ENGINEERING KNOWLEDGE THROUGHOUT

EUROPE”, Coordinator Mr. VASSART, ARCELOR PROFIL, LOUXEMBOURG Pi24. EC RFSR-CT-2007-00031, “VALORISATION OF KNOWLEDGE FOR COMPETITIVE STEEL AND COMPOSITE BRIDGES”, Coordinator

Mrs. KUHLMANN, USTUTT,GERMANY Pi25. EC RFSR-CT-2007-00032, “FIRE SAFETY OF INDUSTRIAL HALL VALORISATION PROJECT”, Coordinator Mrs. OBIALA, ARCELOR

PROFIL, LOUXEMBOURG Pi26. EC RFSR-CT-2007-00035, “INNOVATIVE AND COMPETITIVE NEW JOINING TECHOLOGY FOR STEEL PIPES USING ADHESIVE

BONDING”, Coordinator HAHN, UNIV PADERBORN,GERMANY Pi27. EC RFSR-CT-2007-00037, “ ECONOMICS OF STEEL FRAMED BUILDINGS IN EUROPE ”, Coordinator Mr. HICKS, SCI, ITALY Pi28. EC RFSR-CT-2007-00038, “ PRE FABRICATED STEEL STRUCTURES FOR LOW RISE BUILDINGS IN SEISMIC AREAS”, Coordinator

Mr. OSTA, ILVA, ITALY Pi29. EC RFSR-CT-2007-00039, “ OPTIMIZING THE SEISMIC PERFORMANCE OF STEEL AND STEEL CONCRETE STRUCTURES BY

STANDARDIZING MATERIALS QUALITY CONTROL”, Coordinator Mr. FINETTO, RIVA, ITALY Pi30. EC RFSR-CT-2007-00041, “ SPECIAL COMPONENTS AND STRAIN BASED REQUIREMENTS FOR HIGH STRENGT HIGHT

PRESSURE PIPELINE APPLICATIONS”, Coordinator Mr. BRAUER, SZMF,GERMANY Pi31. EC RFSR-CT-2007-00042, “FIRE RESISTANCE OF LONG SPAN CELLULAR BEAM MADE OF ROLLED PROFILES”, Coordinator Mr.

VASSART, ARCELOR PROFI, LOUXEMBOURG Pi32. EC RFSR-CT-2007-00042, “ RENOVATION OF BUILDINGS USING STEEL TECHNOLOGIES”, Coordinator Mr. LAWSON,SCI, UK Pi33. EC RFSR-CT-2007-00044, “UNBRACED COMPOSITE STRUCTURES IN FIRE”, Coordinator Mr. SCHAUMANN, UNIV

HANNOVER,GERMANY Pi34. EC RFSR-CT-2007-00050, “ STEEL SOLUTIONS FOR SEISMIC RETROFIT AND UPGRADE OF EXISTING CONSTRUCTIONS”,

Coordinator Mr. OSTA, RIVA, ITALY Pi35. EC RFSR-CT-2007-00051, “ NEW MARKET CHANCES FOR STEEL STRUCTURES BY INNOVATIVE FASTENING SOLUTIONS ”,

Coordinator Mrs. KUHLMANN, USTUTT,GERMANY Pi36. EC RFSR-CT-2005-00040, “INDUCTION ASSISTED WELDING TECHNOLOGIES IN STEEL UTILISATION”, Coordinator Mr. MEIER,

LZH,GERMANY


Pi37. LEONARDO DA VINCI, TRAC – Training of Project Managers in Clean Technologies Promotion in the Balkans 2003 – 2005, Parteneri:WIP / Germania, MTS / Spania, UL / Slovenia, MGU / Bulgaria, IPA / Romania

Pi38. EU-SSA-FP6-THE SIXTH FRAMEWORK PROGRAMME(2002-2006) IST, NAS - OREMA - Integrated Efficiency and Environmental Optimisation of Power Plants 2002-2003 Parteneri: Iberdrola / Spania; ITS / Portugalia, CESI / Itlaia, EDP / Portugalia, IPA / Romania, ALSTOM/ Marea Britanie Project Fp5-Integrated System for Smart Commerce Register Using New Information Asset Management, E-Work Tools and Mobile Technologies (ISCORIM). Coordonator proiect : Prof.Constantin OPRAN. (2003-2005)

PREMII NATIONALE SI INTERNATIONALE SI MEDALII

1. GOLD MEDAL THE HAMANGIA THINKER—INTERNATIONAL SALON -INVENTICA , IAŞI – ROMANIA ( Member of IFIA - International

Federation of Inventors' Associations și WIIPA - World Inventions Intellectual Property Associations), June 29- July 1 2016 (http://www.inventica.org.ro/inventica2016/salon.html) for SHORT FEMORAL STEM CERVICAL ENDOPROSTHESIS, authors Marius MOGA, Augustin SEMENESCU, Mihnea Cosmin COSTOIU, Ileana Mariana MATEȘ, Cezar - Ionuţ CĂLIN, Catalin Gheorghe AMZA.

2. The TUC-N Great Prize Pro-Invent 2016 and Trophy , The XIV edition of the International Exhibition of Research, Innovation and Inventions PRO INVENT, Cluj-Napoca, Romania, 23-25th of March 2016.

3. Gold Medal, and a Special Order, and Diploma of Excellence , The XIV edition of the International Exhibition of Research, Innovation and Inventions PRO INVENT, Cluj-Napoca, Romania, 23-25th of March 2016.

4. Diploma of Excellence and Trophy awarded by The Agency of Intellectual Property of the Republic of MoldovaThe XIV edition of the International Exhibition of Research, Innovation and Inventions PRO INVENT, Cluj-Napoca, Romania, 23-25th of March 2016.

5. Diploma of Excellence awarded by Technical University of Moldova, Republic of Moldova, The XIV edition of the International Exhibition of Research, Innovation and Inventions PRO INVENT, Cluj-Napoca, Romania, 23-25th of March 2016.

6. Diploma of Excellence awarded by University of Craiova, Romania-The XIV edition of the International Exhibition of Research, Innovation and Inventions PRO INVENT, Cluj-Napoca, Romania, 23-25th of March 2016.

7. GOLD MEDAL-- Salonul Internațional de Invenții și Inovații ,,TRAIAN VUIA” Timișoara ediția II, în perioada 25-27 mai 2016, for SHORT FEMORAL STEM CERVICAL ENDOPROSTHESIS, authors Marius MOGA, Augustin SEMENESCU, Mihnea Cosmin COSTOIU, Ileana Mariana MATEȘ, Cezar - Ionuţ CĂLIN, Catalin Gheorghe AMZA.

8. Special Award-SIB-- Salonul Internațional de Invenții și Inovații ,,TRAIAN VUIA” Timișoara ediția II, în perioada 25-27 mai 2016, for SHORT FEMORAL STEM CERVICAL ENDOPROSTHESIS, authors Marius MOGA, Augustin SEMENESCU, Mihnea Cosmin COSTOIU, Ileana Mariana MATEȘ, Cezar - Ionuţ CĂLIN, Catalin Gheorghe AMZA.

9. DIPLOMA of participant-- EUROPEAN EXHIBITION OF CREATIVITY AND INNOVATION -E U R O I N V E N T , IAŞI – ROMANIA , Ediția a VIIa, 20-21 Mai 2016 (EUROINVENT este singurul eveniment din România care se desfășoară cu sprijinul IFIA - International Federation of Inventors' Associations și WIIPA - World Inventions Intellectual Property Associations, devenind astfel un eveniment european de elită în domeniul inovării și cercetării)

10. GOLD MEDAL-- EUROPEAN EXHIBITION OF CREATIVITY AND INNOVATION -E U R O I N V E N T , IAŞI – ROMANIA ( Member of IFIA - International Federation of Inventors' Associations și WIIPA - World Inventions Intellectual Property Associations), Ediția a VIIa, 20-21 Mai 2016 (http://www.euroinvent.org) for SHORT FEMORAL STEM CERVICAL ENDOPROSTHESIS, authors Marius MOGA, Augustin SEMENESCU, Mihnea Cosmin COSTOIU, Ileana Mariana MATEȘ, Cezar - Ionuţ CĂLIN, Catalin Gheorghe AMZA.

11. Special Innovation Award-Union of Inventors MOROCCO -- EUROPEAN EXHIBITION OF CREATIVITY AND INNOVATION -E U R O I N V E N T , IAŞI – ROMANIA ( Member of IFIA - International Federation of Inventors' Associations și WIIPA - World Inventions Intellectual Property Associations), Ediția a VIIa, 20-21 Mai 2016 (http://www.euroinvent.org) for SHORT FEMORAL STEM CERVICAL ENDOPROSTHESIS, authors Marius MOGA, Augustin SEMENESCU, Mihnea Cosmin COSTOIU, Ileana Mariana MATEȘ, Cezar - Ionuţ CĂLIN, Catalin Gheorghe AMZA.

12. Scientific Contribution Award-- EUROPEAN EXHIBITION OF CREATIVITY AND INNOVATION -E U R O I N V E N T , IAŞI – ROMANIA ( Member of IFIA - International Federation of Inventors' Associations și WIIPA - World Inventions Intellectual Property Associations), Ediția a VIIa, 20-21 Mai 2016 (http://www.euroinvent.org) for SHORT FEMORAL STEM CERVICAL ENDOPROSTHESIS, authors Marius MOGA, Augustin SEMENESCU, Mihnea Cosmin COSTOIU, Ileana Mariana MATEȘ, Cezar - Ionuţ CĂLIN, Catalin Gheorghe AMZA.

13. Special Award – ZAGREB INVENTORS ASSOCIATION-- EUROPEAN EXHIBITION OF CREATIVITY AND INNOVATION -E U R O I N V E N T , IAŞI – ROMANIA ( Member of IFIA - International Federation of Inventors' Associations și WIIPA - World Inventions Intellectual Property Associations), Ediția a VIIa, 20-21 Mai 2016 (http://www.euroinvent.org) for SHORT FEMORAL STEM CERVICAL ENDOPROSTHESIS, authors Marius MOGA, Augustin SEMENESCU, Mihnea Cosmin COSTOIU, Ileana Mariana MATEȘ, Cezar - Ionuţ CĂLIN, Catalin Gheorghe AMZA.

14. GOLD MEDAL, The 44-th International Exhibition of Inventions of Geneva-The world’s most important, 13 > 17 April 2016, Palexpo Hall 7 (www.inventions-geneva.ch) for SHORT FEMORAL STEM CERVICAL ENDOPROSTHESIS, authors Marius MOGA, Augustin SEMENESCU, Mihnea Cosmin COSTOIU, Ileana Mariana MATEȘ, Cezar - Ionuţ CĂLIN, Catalin Gheorghe AMZA.

15. ARCA AWARD - Union of Croation Innovators, The 44-th International Exhibition of Inventions of Geneva-The world’s most important, 13 > 17 April 2016, Palexpo Hall 7 (www.inventions-geneva.ch) for SHORT FEMORAL STEM CERVICAL ENDOPROSTHESIS, authors Marius MOGA, Augustin SEMENESCU, Mihnea Cosmin COSTOIU, Ileana Mariana MATEȘ, Cezar - Ionuţ CĂLIN, Catalin Gheorghe AMZA.

16. HONORABLE MENTION - China Delegation of Invention and Innovation, The 44-th International Exhibition of Inventions of Geneva-The world’s most important, 13 > 17 April 2016, Palexpo Hall 7 (www.inventions-geneva.ch) for SHORT FEMORAL STEM CERVICAL ENDOPROSTHESIS, authors Marius MOGA, Augustin SEMENESCU, Mihnea Cosmin COSTOIU, Ileana Mariana MATEȘ, Cezar - Ionuţ CĂLIN, Catalin Gheorghe AMZA.

http://www.euroinvent.org/





17. CERTIFICATE AWARD - Turkish Patent Institute, The 44-th International Exhibition of Inventions of Geneva-The world’s most important, 13 > 17 April 2016, Palexpo Hall 7 (www.inventions-geneva.ch), ) for SHORT FEMORAL STEM CERVICAL ENDOPROSTHESIS, authors Marius MOGA, Augustin SEMENESCU, Mihnea Cosmin COSTOIU, Ileana Mariana MATEȘ, Cezar - Ionuţ CĂLIN, Catalin Gheorghe AMZA.

18. GOLD MEDAL —INTERNATIONAL FAIR OF INVENTION AND PRACTICAL IDEAS SIR, IAŞI – ROMANIA ( Member of IFIA - International Federation of Inventors' Associations și WIIPA - World Inventions Intellectual Property Associations), September 115-18, 2016 (http://www.inventica.org.ro/inventica2016/salon.html) for SHORT FEMORAL STEM CERVICAL ENDOPROSTHESIS, authors Marius MOGA, Augustin SEMENESCU, Mihnea Cosmin COSTOIU, Ileana Mariana MATEȘ, Cezar - Ionuţ CĂLIN, Catalin Gheorghe AMZA.

19. HEALTH AWARD INTERNATIONAL FAIR OF INVENTION AND PRACTICAL IDEAS SIR, IAŞI – ROMANIA ( Member of IFIA - International Federation of Inventors' Associations și WIIPA - World Inventions Intellectual Property Associations), September 115-18, 2016 (http://www.inventica.org.ro/inventica2016/salon.html) for SHORT FEMORAL STEM CERVICAL ENDOPROSTHESIS, authors Marius MOGA, Augustin SEMENESCU, Mihnea Cosmin COSTOIU, Ileana Mariana MATEȘ, Cezar - Ionuţ CĂLIN, Catalin Gheorghe AMZA.

20. Special Award and Medal, offered by TAIWAN International Award Winners Asssociation, at IWIS 2016-10th International Warsaw Invention Show (organizat de Association of Polish Inventors and Rationalizers, Patent Office of The Republic of Poland, Warsaw University of Technology), for the invention Total constrained elbow implant, made of shape memory alloys, with a hinge-like locking system and coupling system based on shape memory effect (OSIM A 2016 00188), authors Dan Batalu, Augustin Semenescu, Mihnea Cosmin Costoiu, Ioanel Sinescu,Vasile Iulian Antoniac, Cristian Vasile Doicin, Ion Bogdan Codorean, Ileana Mariana Mates, Catalin Alexandru Barbu, Petre Badica, Traian Stefan Gavriliu

21. Silver Medal and Diploma, offered by Association of Polish Inventors and Rationalizers, Patent Office of The Republic of Poland, Warsaw University of Technology, at IWIS 2016-10th International Warsaw Invention Show, for the invention Total constrained elbow implant, made of shape memory alloys, with a hinge-like locking system and coupling system based on shape memory effect (OSIM A 2016 00188), authors Dan Batalu, Augustin Semenescu, Mihnea Cosmin Costoiu, Ioanel Sinescu,Vasile Iulian Antoniac, Cristian Vasile Doicin, Ion Bogdan Codorean, Ileana Mariana Mates, Catalin Alexandru Barbu, Petre Badica, Traian Stefan Gavriliu

22. GOLD MEDAL of 65th Edition Brussels INNOVA 2016 for “Semiconstrained Total Elbow Prosthesis Made of Shape-Memory Alloys, with Coupling System Based on Shape-Memory Effect” invented by Batalu Nicolae-Dan, Semenescu Augustin, Costoiu Mihnea Cosmin, Antoniac Vasile Iulian, Doicin Cristian Vasile, Amza Cătălin Gheorghe, Mateş Ileana Mariana, Chivu Oana Roxana, Codorean Ion Bogdan, Barbu Cătălin Alexandru, Bădică Petre, Negoiţă Olivia Doina, presented at 65th Edition Brussels Innova 2016: International Innovation Fair (17th-19th of November 2016).

23. TROPHY and Diploma “Outstanding Innovation Award” offered by Bioactive Resources for Innovative Clinical Application Excellent Center, Thailand, 19th of November 2016, for “Semiconstrained Total Elbow Prosthesis Made of Shape-Memory Alloys, with Coupling System Based on Shape-Memory Effect” invented by Batalu Nicolae-Dan, Semenescu Augustin, Costoiu Mihnea Cosmin, Antoniac Vasile Iulian, Doicin Cristian Vasile, Amza Cătălin Gheorghe, Mateş Ileana Mariana, Chivu Oana Roxana, Codorean Ion Bogdan, Barbu Cătălin Alexandru, Bădică Petre, Negoiţă Olivia Doina, presented at 65th Edition Brussels Innova 2016: International Innovation Fair (17th-19th of November 2016).

24. MEDAL and Diploma on behalf of the inventors and co-workers of Industrial Chemistry Research Institute of Warsaw, Poland, Brussels November 2016, awarded by professor Regina Jeziorska, Manager of Polymer Technology and Processing Department for “Semiconstrained Total Elbow Prosthesis Made of Shape-Memory Alloys, with Coupling System Based on Shape-Memory Effect” invented by Batalu Nicolae-Dan, Semenescu Augustin, Costoiu Mihnea Cosmin, Antoniac Vasile Iulian, Doicin Cristian Vasile, Amza Cătălin Gheorghe, Mateş Ileana Mariana, Chivu Oana Roxana, Codorean Ion Bogdan, Barbu Cătălin Alexandru, Bădică Petre, Negoiţă Olivia Doina, presented at 65th Edition Brussels Innova 2016: International Innovation Fair (17th-19th of November 2016).

25. MEDAL and Diploma “Outstanding Innovation Award” offered by Bioactive Resources for Innovative Clinical Application Excellent Center, Thailand, 19th of November 2016, for “Semiconstrained Total Elbow Prosthesis Made of Shape-Memory Alloys, with Coupling System Based on Shape-Memory Effect” invented by Batalu Nicolae-Dan, Semenescu Augustin, Costoiu Mihnea Cosmin, Antoniac Vasile Iulian, Doicin Cristian Vasile, Amza Cătălin Gheorghe, Mateş Ileana Mariana, Chivu Oana Roxana, Codorean Ion Bogdan, Barbu Cătălin Alexandru, Bădică Petre, Negoiţă Olivia Doina, presented at 65th Edition Brussels Innova 2016: International Innovation Fair (17th-19th of November 2016).

26. EUROPEAN Innovation Awards (2016)- - GRAND OFFICER - Finis coronat opus, Mr. SEMENESCU Augustin, Professor, University Politehnica of Bucharest, Romania. No. of the Cross 19620, Brussels, 18-th November, 2016.

27. EUROPEAN Innovation Awards (2015)- - OFFICER - Finis coronat opus, Mr. SEMENESCU Augustin, Professor, University Politehnica of Bucharest, Romania. No. of the Cross 15113, Brussels, 20-th November, 2015.

28. GOLD MEDAL – The world exhibition of inventions, research and new technologies, Brussels INNOVA 2015, for SHORT FEMORAL STEM CERVICAL ENDOPROSTHESIS, authors Marius MOGA, Augustin SEMENESCU, Mihnea Cosmin COSTOIU, Ileana Mariana MATEȘ, Cezar - Ionuţ CĂLIN, Catalin Gheorghe AMZA.

29. Trophy and Special Health and Medecine Award INNOVA 2015, The world exhibition of inventions, research and new technologies, Brussels INNOVA 2015, for SHORT FEMORAL STEM CERVICAL ENDOPROSTHESIS, authors Marius MOGA, Augustin SEMENESCU, Mihnea Cosmin COSTOIU, Ileana Mariana MATEȘ, Cezar - Ionuţ CĂLIN, Catalin Gheorghe AMZA.

30. Medal and Diploma INNOVA 2015, given by Europe France Inventeurs, The world exhibition of inventions, research and new technologies, Brussels INNOVA 2015, for SHORT FEMORAL STEM CERVICAL ENDOPROSTHESIS, authors Marius MOGA, Augustin SEMENESCU, Mihnea Cosmin COSTOIU, Ileana Mariana MATEȘ, Cezar - Ionuţ CĂLIN, Catalin Gheorghe AMZA.

31. Trophy and Diploma INNOVA 2015, given by ORIGITIE Institute of Health and Beauty by Doctor Mukhina, Russian Delegation, The world exhibition of inventions, research and new technologies, Brussels INNOVA 2015, for SHORT FEMORAL STEM CERVICAL ENDOPROSTHESIS, authors Marius MOGA, Augustin SEMENESCU, Mihnea Cosmin COSTOIU, Ileana Mariana MATEȘ, Cezar - Ionuţ CĂLIN, Catalin Gheorghe AMZA.

http://www.inventions-geneva.ch/


32. PAPER AWARD -- Some Aspects about Product Management of Electric Arc Furnace Elements ( A. IOANA, A. SEMENESCU, D. MARCU, M. POLLIFRONI AND M. BREZINOVA ) --- IManE – Innovative Manufacturing Technology International Conference 20th – 22nd May 2015, Iaşi, România, Section J: Production Management http://www.imane.ro/conference-program/

33. Diploma si Medalie de ARGINT cu invenţia: “Traitement combine pour liquides”( Hadăr, A., Marin, Al., Badea, C. D., Semenescu, A., Alionte, C.) - Geneva, 2012, 40 - Salon International des Inventions, des techniques et produits nouveaux, Geneve, 18-22 avril 2012

34. Premiu special al Association of Polish Inventors and Rationalizers pentru invenția: “Method of Combined Treatment of Liquids”( Hadăr, A., Marin, Al., Badea, C. D., Semenescu, A., Alionte, C.), 40 - Salon International des Inventions, des techniques et produits nouveaux, Geneve, 18-22 avril 2012

35. Diploma si Medalie de ARGINT cu invenţia: “Bruleur de recuperation a tubes thermiques”( Semenescu, A., Hadăr, A., Marin, Al., Ghiban, B., Ghiban, N., Alupei, O.D., Pop, H.) 39 - Salon International des Inventions, des techniques et produits nouveaux, Geneve, 6-10 avril 2011

36. Diploma si Medalie de ARGINT cu invenţia: “Orthopedique External Fixation Device and Technique of Growing the Biocompatibility”, (Antoniac, V.I., Semenescu, A., Lăptoiu, D., Marin, Al., Hadăr, A., Ghiban, B., Ghiban, N., Ionescu, L., Alionte, C.G., Alupei-Cojocariu, O.D.)58th edition the World Contest of Innovation, Research and new Technologies, organised during the Belgian and International Trade Fair for Technological Innovation, 20 november 2010, EUREKA Brussels, 2010

37. Diplomă de Excelenţă pentru reprezentarea cu succes a României la Salonul Internaţional de Invenţii de la Geneva - 2010, din partea Autorităţii Naţionale pentru Cercetare Ştiinţifică - Ministerul Educaţiei, Cercetării, Tineretului şi Sportului, 8 iunie 2010.

38. Diploma si Medalia de AUR cu invenţia: ”Dispositif orthopedique externe de fixation pour utilisation dans la medicine pour guerir des fractures osseuses”, 38 - Salon International des Inventions, des techniques et produits nouveaux, Geneve, 21-25 avril 2010

39. Diploma si Medalia de ARGINT la cea de-a 59-a ediţie a Concursului internaţional Bruxelles–EUREKA dedicat inventicii, organizat în cadrul Salonului INNOVA, 18-20 Noiembrie 2010 la Bruxelles, BELGIA

40. Diploma si.Medalia de ARGINT la Salonul Mondial al Inventiilor ” EUREKA 2003” de la Bruxelles, BELGIA, 14-20 nov.2003 (The 7th Edition of National Exhibition of Inventions, Scientific Research and New Technologies - „INVENTIKA – 2003”) pentru inventia “Système mécanique destiné a manœuvrer les poches de coulée pour le coulage de précision des pièces

41. Diploma si.Medalia de ARGINT la Salonul Mondial al Inventiilor ” EUREKA 2003” de la Bruxelles, BELGIA,14- 20 nov.2003 (The 7th Edition of National Exhibition of Inventions, Scientific Research and New Technologies - „INVENTIKA – 2003”) pentru inventia “Composante fémurale pour prothèse totale d’hanche “

42. Diploma si Medalia de BRONZ la Salonul Mondial al Inventiilor ” SALON INTERNATIONAL DES INVENTIONS GÉNÈVE 2003” de la Geneva, ELVETIA, 9-13 aprilie 2003 ( The 31-th International Exhibition of Inventions, New Techniques and Products ,Geneva – Switzerland, 9-13 april 2003) pentru inventia “Installation pour Maneouvrer les Poches de Coulés“

43. Diploma si Medalia de ARGINT la Salonul Mondial al Inventiilor ” SALON INTERNATIONAL DES INVENTIONS GÉNÈVE 2002” de la Geneva, ELVETIA, 21-23 mai 2002 ( The 30-th International Exhibition of Inventions, New Techniques and Products ,Geneva – Switzerland, 21-23 mai 2002) pentru inventia “ Procedé et Installation de Combustion Régénèrative, Discontinue“

44. Diploma si Medalia de BRONZ la ” SALON INTERNATIONAL DES INVENTIONS GENEVE 2001” de la Geneva, ELVETIA, 4 apr..2001 ( The 29th International Exhibition of Inventions, New Techniques and Products ,Geneva – Switzerland, 4 – 6 April 2001) pentru inventia “ Installation de brulage a oxydation reduite pour fours de chauffage “.

45. Diploma si.Medalia de ARGINT la Salonul Mondial al Inventiilor ” EUREKA 2000” de la Bruxelles, BELGIA, 20 nov.2000 (The 4th Edition of National Exhibition of Inventions, Scientific Research and New Technologies - „INVENTIKA – 2003”) pentru inventia “ Installation pour obtenir de la chaux “

46. Diploma si Medalia de AUR la Salonul Mondial al Inventiilor ” EUREKA 2000” de la Bruxelles, BELGIA, 20 nov. 2000(The 4th Edition of National Exhibition of Inventions, Scientific Research and New Technologies - „INVENTIKA – 2003”), pentru inventia “ Procédé et installation de combustion régénérante et countinue “

47. Medalie de argint la Salonul International de Inventica PROINVENT 1999, pentru inventia “Instalatie si dispozitiv de recirculare a gazelor arse pentru cuptoare de producere var”, autori : S.Crudu-Pivniceru , A. Semenescu, R. Pivniceru, C. Petcu, P. Kovecsi (16 – 18 oct. 1997)

48. Medalie de aur la Salonul International de Inventica PROINVENT 1999, pentru inventia “ Tub radiant recuperativ cu tuburi termice”, autori : A. Semenescu , R. Pivniceru (7 – 9 oct. 1999)

49. “Diploma of Honour “ la Salonul de Inventii INVENTIKA 1998, Bucharest Romania (8 – 13 0ct. 1998) 50. Mentiune la Salonul International de Inventiva PROINVENT 1997 pentru inventia “Focar de aprindere cu arzator lamelar rotativ”, autori :

A.Semenescu, R. Pivniceru, P. Kovecsi, R. Stanescu, C. Petcu, C. Doniga, S. Antonovici, M. Ghirtoi, I. Ghinoiu, P. Nedelcu (16 –18 oct. 1997) .

51. Medalie de argint la Salonul International de Inventica PROINVENT 1997, pentru inventia “ Focar pentru aglomerare”, autori : A. Semenescu , R. Stanescu, R. Pivniceru, C. Petcu, P. Kovecsi (16 – 18 oct. 1997)

52. Premiul (pentru cea mai actuala inventie implementata) la Salonul International pentru Tineret “Inventica – Creativitate – Inovare”, editia III, 23 oct. 1997, Chisnau, Rep. Moldova . Autori : A. Semenescu, R. Pivniceru, P. Kovecsi, R. Stanescu, C. A. Petcu, C. Doniga, S. Antonovici, N. Ghirtoi, I. Ghinoiu, P. Nedelcu.

53. Mentiune 1996 – SRM pentru lucrarea “ Tehnologii si solutii constructive moderne de utilaje pentru realizarea unui aglomerat feros de buna calitate si cu consumuri minime de materie si energie” . Autori : P. Kovecsi, O. Dolinski, Elena Constantin, A. Semenescu (3 – 5 aprilie 1997 , Brasov ) .

54. Marele premiu 1996- Premiul Presedintelui SRM pentru lucrarea :”Sisteme moderne, economice, ecologice si fiabile de incalzire a materialelor metalice si nemetalice folosind calculatorul si arzatoarele regenerative” . Autori : A. Semenescu , L. Valceanu, V. Mirea, P.Hrebenciuc, A. Ioana (3 – 5 aprilie 1997, Brasov) .

55. Premiul AGIR, 1994, in domeniul : “Inginerie metalurgica” pentru lucrarea : “Focar de aprindere cu arzatoare multiple de tip lamelar (Brevet 107 028)”

56. Premiul I la “Concursul de Creatie Tehnico-Stiintifica Bucuresti” - 1989.


BREVETE DE INOVAŢIE, aplicate in practica:

1. O. Jalobeanu, A. Semenescu: ” Cuptor electric cu arc de 100 t, cu evacuare excentrca”, Certificat inovator nr. 124/1990. 2. R. Pivniceru, R. Stanescu, A. Semenescu: “Focar lamelar pentru banda de agomerare”, Certificat inovator nr. 123/1990. 3. A. Semenescu, R. Stanescu:” Bolta racita cu apa pentru cuptor cu arc de 5t”, Certificat inovator nr. 115/1990. 4. A. Semenescu, R. Stanescu:” Bolta monobloc racita pentru cuptor cu arc de 100t” Certificat inovator nr. 114/1990. 5. O. Jalobeanu, A. Semenescu, C. Covalschi:” Cuptor electric cu arc de 100 t, cu panouri de racire a cuvei”, Certificat inovator nr. 113/1990 6. O. Jalobeanu, A. Semenescu, C. Covalschi:” Cuptor electric cu arc de 100 t, cu panouri de racire a cuvei”, Certificat inovator nr. 113/1990 7. O. Jalobeanu, A. Semenescu, C. Covalschi:” Cuptor electric cu arc de 50 t, cu panouri de racire a cuvei”, Certificat inovator nr. 111/1990. 8. A. Semenescu, R. Stanescu:” Cuptor cu vatra pasitoare Sv=17,3m2”, Certificat inovator nr. 87/1990.

9. A. Semenescu: “Cuptor carusel disc - 1,6 m”, Certificat inovator nr. 77/1990. 10. C. Petcu, M. Marcu, A. Semenescu, R. Stanescu:” Cuptor de incalzire cu vatra inelara”, Certificat inovator nr. 76/1990. 11. A. Semenescu, T. Popescu, O. Dinu :”Cuptor tunel cu instalatie de ardere mixta”, Certificat inovator nr. 75/1990. 12. A. Semenescu, R. Stanescu: “Cuptor de separare a aluminiului sau a zincului“, Certificat inovator nr. 74/1990 13. R. Stanescu, A. Semenescu: “Cuptor de dezoxidare cu banda“, Certificat inovator nr. 73/1990 14. N. Marcu, A. Semenescu: “Instalatie de sinterizare ante-creuzet basculant de 40 t cu gaz de cocs si gaz metan“, Certificat inovator nr.

549/1989. 15. A. Semenescu: “Cuptor tunel pentru arderea produselor refractare“, Certificat inovator nr. 548/1989. 16. A. Semenescu: “Cuptor clopot pentru produse refractare“, Certificat inovator nr. 547/1989. 17. A. Semenescu: “Cuptor electric cu vatra mobila, Sv = 32 m2, T = 10000C“, Certificat inovator nr. 546/1989. 18. A. Semenescu, N. Marcu: “Cuptor de ars teci termocuplu T = 18000C“,Certificat inovator nr. 545/1989. 19. A. Semenescu: “Cuptor electric cu vatra mobila, T = 6500C“, Certificat inovator nr. 544/1989. 20. A. Semenescu, R. Pivniceru: “Cuptor electric, radiativ, multicelular cu rastele mobile “, Certificat inovator nr. 373/1989. 21. A. Semenescu, R. Pivniceru: “Cuptor de tratament termochimic cu banda, electric“, Certificat inovator nr. 372/1989. 22. R. Pivniceru, C. Petcu, R. Stanescu, A. Semenescu: “Cuptor de calcinare zgura pentru instalatii REZ“, Certificat inovator nr. 4/1987 23. R. Pivniceru, C. Petcu, R. Stanescu, A. Semenescu: “Cuptor pentru incalzit electrozii consumabili ai instalatiilor REZ“, Certificat inovator nr.

3/1987.

Ordine și Medalii Internaționale

EUROPEAN Innovation Awards (2015)- - OFFICER - Finis coronat opus, Mr. SEMENESCU Augustin, Professor Dr., University Politehnica of Bucharest, Romania. No. of the Cross 15113, Brussels, 20-th November, 2015.

EUROPEAN Innovation Awards (2016)- - GRAND OFFICER - Finis coronat opus, Mr. SEMENESCU Augustin, Professor Dr., University Politehnica of Bucharest, Romania. No. of the Cross 19620, Brussels, 18-th November, 2016.

BARCELONA Innovation Awards (2017)- - GRAND OFFICER – Tantae molis erat, Mr. SEMENESCU Augustin, Professor Dr., University Politehnica of Bucharest, Romania. No. of the Cross 20100, Barcelona, 4-th May, 2017.

Europass Curriculum Vitae - cmpcvb.ro · Universitatea Politehnica din Bucuresti, Facultatea...

Documents

Transcript of Europass Curriculum Vitae - cmpcvb.ro · Universitatea Politehnica din Bucuresti, Facultatea...