Electroventil GD Si Detector de Gaz DCF90 PRIMATECH Electroventile Si Detectoare de Gaz

Electroventil si detector de gaz

Detectorul de gaz metan seria GD este un detector de uz casnic cu montaj pe perete destinat detectarii concentratiei de gaz inflamabil utilizand componente de înalta precizie sensibile la aer si fabricate cu tehnologie avansata. Produce semnale luminoase si acustice cand concentratia de gaz ajunge la valoarea prestabilita si va avertizeaza sa actionati prompt.

Electroventilul DCF-90 cu rearmare manuala este actionat de releul dectorului de gaz. Cand scaparile de gaz din camera monitorizata ajung la nivelul de alarma, alarma detectorului va începe sa sune, si va comanda ventilul sa închida conducta de alimentare cu gaz, pentru a evita continuarea scaparilor, arderea si explozia.Acest ventil are multe performante exceptionale, una dintre acestea fiind consumul mic indiferent ca se afla in pozitia deschis sau închis, neconsumand energie numai in momentul in care deschide sau închide. Date tehnice: Gaze vizate: Gaze naturale.Diametru: G ¾" Corp: alama, otel, fier si aliaje din aluminiuMateriale etanse: NBR cauciuc, FKM cauciucMod de deschidere: Resetare manualaMod de închidere: Actionare cu impuls CC/ ManualTimp de închidere a ventilului: sub 1 secTimp permis pentru alimentare continua: sub 30 secNivelul de explozie: IP54 Domeniul standard de functionare:Presiunea maxima de functionare: 85KPA ~106KPATemperatura mediului: 10ºC~+60ºCTensiune: 6V, 9V, 12V, 24V CC

http://en.wikipedia.org/wiki/Gaz_metan

http://en.wikipedia.org/wiki/Alarma

PREVENT 2000M - Detector de gaz metanSpecificaţii tehnice :

Senzor: Semiconductor SnO2 Tensiune de alimentare: 230V ac

(-15% +10%) 50/60Hz Putere consumată: 3VA Gaz detectat: metan Interval de alarmare: 3% - 20% LIE Prag de alarmare: 9% LIE Timp de stabilizare iniţială: 2 min 30 sec Indicatori:

LED Verde: AlimentareLED Roşu: Alarmă vizualăLED Galben: continuu – defecţiune

din 10 în 10 sec – stare de vegheBUZZER: alarmă sonoră – min. 85 dB la 1m

Durata de viaţă: 5 ani Valori nominale de contact releu:

8(2)A @ 250V AC SPDT3A @ 250V AC SPST (opţional)

Temperatura de lucru: -10°C ÷ +40°C Temperatura de depozitare: -20°C ÷ +50°C Umiditate (fără condensare): 20% - 90% rH Grad de protecţie: IP 42 Carcasa:

Material: ABS V0Culoare: alb

Dimensiuni: 115 x 75 x 43 mm (L x l x h) Greutate: 300g

PREVENT 1279 - Detector de gaz metanSpecificaţii tehnice :

Senzor: Semiconductor SnO2 Tensiune de alimentare: 230V ac (-15% +10%) 50/60Hz Putere consumată: 3VA Gaz detectat: metan Interval de alarmare: 3% - 20% LIE Prag de alarmare: 9% LIE Timp de stabilizare iniţială: 2 min 30 sec Indicatori:



Durata de viaţă a senzorului: 5 ani Valori nominale de contact releu:

8(2)A @ 250V AC SPDT3A @ 250V AC SPST (opţþional)

Temperatura de lucru: -10°C ÷ +40°C Temperatura de depozitare: -20°C ÷ +50°C Umiditate (fără condensare): 20% - 90% rH Carcasa:



SECOR 779 - Detector de gaz metanSpecificaţii tehnice :

Element detector: senzor semiconductor SnO2 Tensiune de alimentare: 12V ac/dc, 24V ac/dc sau 220V ac Putere consumată:

- curent stand-by la 12V: max. 12mA- curent alarmă: max. 50 mA

Curent de sarcină contact releu:- 12V: max. 2A- 220V: max. 0.5A

Gaz detectat: metan Interval de alarmare: 3% - 20% LIE Alarmă:

- sonoră: Buzzer piezo- optică: LED Galben- ieşire contact releu: COM/NO sau COM/NC

Funcţionare normală: - stare de veghe- LED galben intermitent

Durata de viaţă a senzorului: 5 ani Temperatura de lucru: -10°C ÷ +40°C Temperatura de depozitare: -20°C ÷ +50°C Umiditate (fără condensare): 20% - 90% rH Material carcasă: plastic ABS 768, VL 94VO Culoare: alb Dimensiuni:

- varianta 12V: 105mm x 50 mm (Dxh)- varianta 220V: 105mm x 62 mm (Dxh)

Greutate:- varianta 12V: 175g- varianta 220V: 250g

PREVENT 2000C - Detector de monoxid de carbon

http://www.primatech.ro/secor_779_m?ret=3.html

Specificaţii tehnice : Senzor: Electrochimic Tensiune de alimentare: 230V ac

(-15% +10%) 50/60Hz Putere consumată: 0.7W Gaz detectat: monoxid de carbon Niveluri de alarmare:

50 ppm între 60 min – 90 min100 ppm între 10 min – 40 min300 ppm între 0 min – 3 min

Timp de stabilizare iniţială: 2 min 20 sec Indicatori:





Temperatura de lucru: -10°C ÷ +40°C Temperatura de depozitare: -20°C ÷ +50°C Umiditate (fără condensare): 20% - 90% rH Grad de protecţie: IP 42 Carcasa:



SECOR 850 - Detector de monoxid de carbonSpecificaţii tehnice :

Element detector: senzor semiconductor SnO2 Tensiune de alimentare: 12V ac/dc, 24V ac/dc sau 220V ac Putere consumată:

- curent stand-by la 12V: max. 12mA- curent alarma: max. 50 mA

Curent de sarcină contact releu:- 12V: max. 2A- 220V: max. 0.5A

Gaz detectat: monoxid de carbon Alarmă inainte de 3 min: 300 ppm concentraţie CO:

- sonoră: buzzer piezo- optică: LED Roşu- ieşire contact releu: COM/NO sau COM/NC




SECOR 2000 - Detector de gaz metan şi monoxid de carbonSpecificaţii tehnice :

Senzor: Semiconductor SnO2

Tensiune de alimentare: 230V ac(-15% +10%) 50/60Hz

Gaz detectat: Metan şi Monoxid de Carbon Interval de alarmare CH4: 3% - 20% LIE Alarmă înainte de 3 min: 300 ppm concentraţie CO Timp de stabilizare iniţială: 2 min 30 sec Indicatori:

LED Verde: AlimentareLED Roşu: Alarmă vizuală COLED Galben: Alarmă vizuală CH4

intermitent – stare de vegheBUZZER: alarmă sonoră – min. 85 dB la 1m



Temperatura de lucru: -10°C ÷ +40°C Temperatura de depozitare: -20°C ÷ +50°C Umiditate (fără condensare): 20% ÷ 90% rH Grad de protecţie: IP 42 Carcasa:



SECOR 1000 - Detector de gaz metan şi monoxid de carbonSpecificaţii tehnice :

Element detector: senzor semiconductor SnO2 Tensiune de alimentare: 12V ac/dc, 24V ac/dc sau 220V ac

Putere consumată:- curent stand-by la 12V: max. 12mA- curent alarmă: max. 50 mA

Curent de sarcinã contact releu:- 12V: max. 2A- 220V: max. 0.5A

Gaz detectat: metan şi monoxid de carbon Interval de alarmare:

CH4: 3% - 20% LIECO: alarmă inainte de 3 min la 300 ppm

Alarmă:- sonoră: Buzzer piezo- optică: LED Galben (CH4) şi LED Roşu (CO)- ieşire contact releu: COM/NO sau COM/NC

Funcţionare normală: - stare de veghe- LED galben intermitent




Electrovalve de siguranţă pentru gaz cu rearmare manuală, normal deschiseEVRM-NA/EVRM-6NA; EVRM-NC/EVRM-6NC;

EVRM-NA / EVRM-6NAElektrogas safety solenoid valves for gas with manual reset, normally open

Technical specifications

Alternative Views

Features:The EVRM-NA type valve is a manual reset safety valve that is normally open. A manual operation is therefore necessary to open the valve and set the mechanism consenting to maintain this state. The powering by means of line current and/or condenser discharge, induced by the leakage detector, causes tripping of the mechanism and consequent closing of the gas passage. If energizing of the sensor persists due to the presence of gas, the valve remains under power and does not allow reset. When the causes for locking have been eliminated, the valve may be reopened by working it manually. This type of device, connected with one or more leakage detectors or alarm signals for the presence of carbon monoxide, is suitable for performing locking operations on the gas line.

EVRM-NC / EVRM-6NCElektrogas safety solenoid valves for gas with manual reset normally closed


Alternative Views

Features:The EVRM-NC type valve is a manual reset safety valve that is normally closed. When the coil is not energized the spring works on the shutter keeping the gas passage closed. Simply by energizing the coil the valve does not open. It is necessary to manually move the reset rod located at the top of the coil. Once opened, the valve can maintain this position until electric current circulates on the coil. In absence of electric current the valve closes rapidly and remains shut upon return of same. Once the causes for the lock have been eliminated, opening must be worked manually as described above. This type of device, connected with one or more pressure switches is suitable for locking operations upon gas, air, or electric current failure, and is qualified for continuous service (permanently live).

VMRElektrogas safety solenoid valves for air and gas fast opening and fast closing type

http://en.wikipedia.org/wiki/Electric_current

http://en.wikipedia.org/wiki/Safety_valve

http://www.07detector.com/evrmnc-en.html?ret=1

http://en.wikipedia.org/wiki/Carbon_monoxide


http://www.07detector.com/evrmna-en.html?ret=1








Alternative Views

Features:The VMR type valve is a fast opening solenoid valve that is normally closed. When the coil is not energized the spring works on the disc keeping the gas passage closed. When the coil is powered the valve opens. When power is switched off the valve rapidly shuts. This type of device is suitable for gas and air blocking and adjusting controls in atmospheric burners or fanassisted burners, in industrial kilns and in all gas equipments which use gas solenoid valves (qualified for continuous service ).

VMLElektrogas safety solenoid valves for air and gas slow opening and fast closing type


Alternative Views

Features:The VML type valve is a safety valve that is normally closed, with fast or slow opening and adjustable rapid section for initial gas flow. When not in working position the spring works on the disc keeping the gas passage closed. When the coil is powered the valve opens rapidly in the first section of the flow, then slowly, with adjustable speed. When power is switched off the valve rapidly shuts. This type of device is suitable for gas and air blocking and adjusting controls in atmospheric burners or fanassisted burners, in industrial kilns and in all gas equipments which use gas solenoid valves (qualified for continuous service ).

VRA / VLAElektrogas solenoid valves for combustion air regulation

http://en.wikipedia.org/wiki/Solenoid


http://www.07detector.com/vml-en.html?ret=4


http://en.wikipedia.org/wiki/Solenoid_valve

http://www.07detector.com/vmr-en.html?ret=3









Alternative Views

Features:The VRA/VLA types are normally closed solenoid valves for cold combustion air regulation. When the coil is not energized the spring works on the disc, keeping the adjusted minimum passage of air. When powering the coil the valve opens, moving the disc to the maximum open position. When power is switched off the valve rapidly moves to the minimum position. This type of device is suitable for high/low stage control of combustion air in industrial gas burners (qualified for continuous service ).

VMMElektrogas multiple safety solenoid valve for gas regulating trains


Features:The VMM type valve is a combination of two valves in an only compact and versatile valve housing. The first valve is a fast opening safety solenoid valve. The second valve may be a fast opening or a slow opening solenoid valve to adjust the gas flow, with a first adjustable fast stroke and a second adjustable slow stroke. It is possible to connect a third by-pass valve, which performs by driver stage or to obtain a second fast (slow) stroke or both. This type of device is suitable for gas and air blocking and adjusting controls in atmospheric burners or fanassisted burners (with one or two stages operation), in industrial kilns and in all gas equipments which use regulating trains.

FG / FGSElektrogas Gas Filters



http://www.07detector.com/vmm-en.html?ret=6

http://www.07detector.com/vmm-en.html?ret=6

http://en.wikipedia.org/wiki/High/Low


http://www.07detector.com/vra-en.html?ret=5





Alternative Views

Features:Filters for gas pipelines with very high holding capacity of dust and impurities, suitable for protection of devices installed downstream.

The filter cartridge is a steel supported frame covered with a high performance nonwoven made of polyolefine fibres, which satisfy the stringent requirements of Fire Class F1 according to DIN 53438 and thus are self-extinguishing. Inlet and outlet pressure chambers can be provided with G1/8 gauges, to connect a gas differential pressure switch to monitor the pressure difference. When the dust storage capacity is exceeded, the filter element must be replaced. FGS1-2 models are provided with a washable mesh filter cartridge.

VMR; VML; VRA/VLA; VMM; FG/FGS

Electroventil si detector de gaz

Detectorul de gaz metan seria GD este un detector de uz casnic cu montaj pe perete destinat detectarii concentratiei de gaz inflamabil utilizand componente de înalta precizie sensibile la aer si fabricate cu tehnologie avansata. Produce semnale luminoase si acustice cand concentratia de gaz ajunge la valoarea prestabilita si va avertizeaza sa actionati prompt.

Electroventilul DCF-90 cu rearmare manuala este actionat de releul dectorului de gaz. Cand scaparile de gaz din camera monitorizata ajung la nivelul de alarma, alarma detectorului va începe sa sune, si va comanda ventilul sa închida conducta de alimentare cu gaz, pentru a evita continuarea scaparilor, arderea si explozia.Acest ventil are multe performante exceptionale, una dintre acestea fiind consumul mic indiferent ca se

http://en.wikipedia.org/wiki/Alarma

http://en.wikipedia.org/wiki/Gaz_metan

http://en.wikipedia.org/wiki/Pressure_switch

http://en.wikipedia.org/wiki/Nonwoven_fabric

http://www.07detector.com/fg-en.html?ret=4





afla in pozitia deschis sau închis, neconsumand energie numai in momentul in care deschide sau închide. Date tehnice: Gaze vizate: Gaze naturale.Diametru: G ¾" Corp: alama, otel, fier si aliaje din aluminiuMateriale etanse: NBR cauciuc, FKM cauciucMod de deschidere: Resetare manualaMod de închidere: Actionare cu impuls CC/ ManualTimp de închidere a ventilului: sub 1 secTimp permis pentru alimentare continua: sub 30 secNivelul de explozie: IP54 Domeniul standard de functionare:Presiunea maxima de functionare: 85KPA ~106KPATemperatura mediului: 10ºC~+60ºCTensiune: 6V, 9V, 12V, 24V CC

Electroventil GD Si Detector de Gaz DCF90 PRIMATECH Electroventile Si Detectoare de Gaz

Documents

Transcript of Electroventil GD Si Detector de Gaz DCF90 PRIMATECH Electroventile Si Detectoare de Gaz