68470333 Carte Tehnica Procedura

7/22/2019 68470333 Carte Tehnica Procedura

1/16

I. Introducere I. Introduction

Cartea tehnica a constructiei se compune

din ansamblul de documente referitoare laproiectarea, executia, receptia, exploatarea,

intretinerea, repararea si urmarirea in timp a

constructiei.

Ea cuprinde documentatia de baza

structurata pe patru capitole si doua anexe care,

prin completarea lor, formeaza, in final , CarteaTehnica a Constructiei in conformitate cu HG

nr.273/1994 , si anume:

Fisa de date sinteticeCapitolul A : Documentatia privind proiectarea

Capitolul B : Documentatia privind executia

Capitolul C : Documentatia privind receptiaCapitolul D : Documentatia privind exploatarea,

intretinerea, repararea si urmarirea

comportarii in timpJurnalul evenimentelor

The technical bookof the building consist

an overall documents refering to the design,execution, reception, exploitation, maintenance,

repair and tracking of the building in time.

It includes the base documentation that is

structured in four chapters and two annexes

which, from their completion form the TechnicalBook as per GD no.273/1994, in the end, as it

follows:

Index card of the synthetic datesChapter A : The design documentation

Chapter B : The execution documentation

Chapter C : The reception documentationChapter D : Documentation for exploitation,

maintenance, repair and tracking of

the behavior in time.Events journal

Cap. A : Documentatia privind proiectarea Chip. A : Design documentation

Documentatia privind proiectarea va

cuprinde, conform HG nr.592 / 1993 (Regulament

privind procedurile de organizare a licitatiilor) :

1. Tema de proiectare, elaborata deinvestitor (beneficiar)

2. Amplasarea obiectuluijudet,localitate, strada, numar

3. Avize si acorduri:Avizele si acordurile emise de organele in drept,

potrivit legislatiei in vigoare, privind:

avizul ordonatorului principal de crediteprivind necesitatea si oportunitatea

realizarii investitiei;

certificatul de urbanism; avizele privind asigurarea utilitatilor:

o energiei termice si electrice;o gaz metan;o apa, canal;o telecomunicatiio acordul Inspectiei de Stat in

Constructii (ISC) privind

The design documentation should include

as per GD no.592/1993 (Rule of the the auction

organization procedures) :

1. Design theme, developed by the investor(owner)

2. Location of the objectcounty, locality,street, number

3. Notifications and agreements:The notifications and agreements issued by the

law enforcement, as per foree legislation, on :

the principal credits sequencer notificationon the necessity and opportunity of the

investment accomplishment;

urbanism cerficate notifications for utilities insurance:

o thermic and electrical energyo marsh gaso water, sewer systemo telecommunicationo the agreement of the State

Inspectorate in Constructions (SIC)


2/16

interventiile la constructiile

existente etc.

avizele pentru consumul de combustibil; avizele pentru protectia mediului si apelor; alte avize de specialitate potrivit

dispozitiilor legale; acordul proprietarilor vecini pentru

cazurile in care noua constructie intervine

cu lucrari la imobilele acestora;

aviz Aparare Civila.4. Documentatia tehnica4.1.Parti scrise4.1.1. Prezentarea generala a lucrarilora. Elemente generale

Proiectul tehnic trebuie sa fie verificat,

avizat si aprobat potrivit prevederilor legale.El este format din documentatia scrisa si

desenata.

Proiectul tehnic se elaboreaza pe baza

studiului de fezabilitate aprobat, etapa in care aufost stabilite elementele si solutiile principale ale

lucrarii si au fost obtinute toate avizele, acordurile

si aprobarile executiei lucrarii, in conformitate cuprevederile legale. Proiectul tehnic se verifica de

catre specialisti atestati de MLPAT conform

regulamentului aprobat prin HG nr. 731 / 1991

(Regulament de atestare tehnico-profesionala aspecialistilor cu activitate in constructii) si se

avizeaza si se aproba de investitor.

La lucrarile ce se executa din fonduri publice

este necesar si studiul de prefezabilitate.

b.

Descrierea lucrarilorIn aceasta sectiune se vor face referiri

asupra urmatoarelor elemente:

Amplasamentul; Topografia; Clima zonei; Geologia, seismicitatea; Prezentarea proiectului pe volume, brosuri,

capitole;

Organizarea de santier, descriere sumara,

on the improvement at the existing

constructions etc.

notifications for fuel consuming; notifications for environment and water

protection;

another notifications as per legaldispositions;

the agreement of the neighbours ownerwhen the new construction intervene with

works on their immobile;

notification from Civil Defence.4. Technical documentation4.1. Written parties4.1.1. General view of the worksa. General elements

The technical project needs to be checked,

noticed and approved as per legal previsions.It is composed by the written

documentation and the drawn parts.

The technical project is developed on the

approved feasibility study, stage inside wereestablished the elements and principal solutions of

the construction and were obtained all the

notifications, the agreements and approvals of thebuilding execution, as per legal previsions. The

technical project is checked by the certificate

experts certified by MLPAT as per the rule

approved by HG no. 731 / 1991 (Regulation thatcertified the experts technical-proffesional activity

in constructions) and is notificated and approved

by the investor.At the works that are executed with public

funds it is necessary the fesability study also.

b.

Description of the worksThis section is referring at the followings:

Emplacement; Topography; Zonal climate; Geology, seismicity; The presentation of the project on

volumes, brochures, chapters;

Site organization, summary description,


3/16

demolari, devieri de retele etc.;

Sursele de apa, energie electrica, gaze,telefon;

Caile de acces, caile de comunicatie; Trasarea lucrarilor; Protejarea lucrarilor executate si a

materialelor din santier;

Masurarea lucrarilor; Curatenia in santier; Serviciile sanitare; Relatiile intre proiectant, consultant si

investitor;

Memoriile tehnice pe specialitati.4.1.2. Caietele de sarcini

Caietele de sarcini dezvolta in scris elementele

tehnice mentionate in planse si prezinta informatii,

precizari si prescriptii complementare planselor.Ele se elaboreaza de catre proiectant pe baza

planselor deja terminate si se organizeaza in

brosuri distincte pe specialitati.

a. Tipuri si forme de caiete de sarciniIn functie de destinatie pot fi:

caiete de sarcini pentru executia lucrarilor; caiete de sarcini pentru receptii, teste,

probe, verificari si puneri in functiune,urmarirea comportarii in timp a

constructiilor;

caiete de sarcini pentru furnizorii demateriale, utilaje, echipamente si confectiidiverse etc.

b. Continutul caietelor de sarciniCaietele de sarcini trebuie sa cuprinda:

breviarele de calcul pentru dimensionareaelementelor de constructii si instalatii;

nominalizarea planselor care guverneazalucrarea;

proprietatile fizice, chimice, de aspect, decalitate, tolerante, probe pentru materialelecomponente ale lucrarii

dimensiunea, forma, aspectul si descriereaexecutiei lucrarii;

ordinea de executie, probe, teste, verificariale lucrarii;

standardele, normativele si alte prescriptiicare trebuie respectate la materiale, utilaje,

demolitions, networks deviation;

Water sources, electrical energy, gas,phone;

Access roads, communication ways; Setting out of the works; Protection of the executed works and

materials on site;

Works measuring; Cleaning the site; Sanitary services; Relationships between the designer,

consultant and investor;

Technical prescription on activities.4.1.2. Technical Specifications

The Technical Specifications develop in

write the technical elements mentioned in the

drawings and have information and drawingcomplementary specifications. These ones are

issued by the designer on the drawings finished

already and are organized in separate brochures onspecialities.

a. Types and forms of the technicalspecifications:Depending on the destination these can be:

technical specifications for the worksexecution;

technical specifications for reception, tests,

events, verifications and start of regularproductions, tracking the constructions in

time;

technical specifications for the material,

equipment, machinery and for variousmanufacture suppliers etc.

b. Technical specifications contentsThe technical specifications should include:

Breviary calculation for admeasurementsof the construction and plants elements;

Nomination of the drawings that governsthe work;

Physical, chemical, estetique, quality,tolerence properties of the workcomponents material;

Dimension, form, aspect and description ofthe work execution;

The order of execution, samples, tests,controls of the work;

Standards, normative and otherprescriptions that must be respected in the


4/16

confectii, executie, montaj etc.;

conditii de receptie, aspect, culori,tolerante etc.

4.1.3. Breviare de calcul pe specialitati(actiuni, ipoteze de calcul, rezultatele

calculelor de dimensionare siverificare etc.)

4.2. Parti desenatePartile desenate se compun din:

4.2.1 Planurile generale planurile de amplasare a reperelor de

nivelment planimetrice;

planuri topografice principale; planurile de amplasare a forajelor si

profilelor geotehnice;

planurile principale privind sistematizareaverticala a terenului;

planurile principale privind constructiilesubterane;

planurile de amplasare a reperilor ficsi simobil de tasare.

4.2.2. Plansele obiectuluiPlansele se organizeaza in volume pe specialitati

a. ArhitecturaAceasta sectiune va cuprinde planse privind

arhitectura fiecarui obiect, conform borderouluiintocmit de proiectant:

planul de amplasare; planurile de arhitectura ale nivelurilor

subterane si supraterane, ale teraselor,acoperisurilor etc.;

sectiuni, fatade, detalii etc.; tablouri de prefabricate, confectii; tablouri de tamplarii si tablouri de finisaje

interioare si exterioare;

etc.b. Structura

Aceasta sectiune va cuprinde plansele privindalcatuirea si executia structurii de rezistentapentru fiecare obiect, conform borderoului

intocmit de proiectant:

planurile infrastructurii si sectiunilecaracteristice;

planurile suprastructurii si sectiunilecaracteristice;

descrierea solutiilor constructiverecomandate si a tehnologiilor de executie

case of materials, equipments,

manufactures, execution, montage etc.;

Conditions for reception, aspect, colors,tolerance etc.

4.1.3. Breviaries calculation on specialties(actions, calculation hypotheses,

results of the admeasurements andchecking calculation )

4.2. Drawn partsThe drawn parts consist:

4.2.1. Master plans layout of marks lacation !!!!!!!!!!!!!!! principal topographic layout; layout for drilling locations and for the

geotechnic profiles;

principal layout concerning the verticalsystematization of the area;

principal layout for the undergroundconstructions;

layout for placement of the fixed andmobile compaction marks.

4.2.2 Objects drawingThe drawings are organized in volumes on

specialities

a. ArchitectureThis section will include architecture drawings forevery object, in conformity with the borderau

issued by the designer: placement layout; architecture layout for the underground

and areal levels, terrace, roofs etc.;

sections, faade, details etc.; precast panels, manufactures; joinery panels and panels for interior and

exterior finishing;

etc.b. Structure

This section will include drawings with thecomposition and execution of the resistancestructure for each object, in conformity with the

bordereau issued by the designer:

layout of the infrastructure and hischaracteristic sections;

layout of the superstructure and hischaracteristic sections;

description of the recommended solutionfor the construction and execution


5/16

recomandate.

c. InstalatiileAceasta sectiune va cuprinde planse privind

montajul instalatiilor fiecarui obiect, conform

borderoului intocmit de proiectant:

planurile de amplasare a utilajelor siechipamentelor;

schemele de amplasare a utilajelor siechipamentelor;

scheme ale instalatiilor; sectiuni, vederi, detalii.d. Dotari si instalatii tehnologice

Aceasta sectiune va cuprinde planurile principalede tehnologie si montaj si anume:

desene de ansamblu; scheme tehnologice ale fluxuluitehnologic; scheme cinematice; schemele instalatiilor; diagrame, monograme, calculele

ingineresti, tehnologice si de montaj;

planuri de montaj, geometrii, dimensiunide amplasare, scheme tehnologice de

montaj;

liste cu utilaje si echipamentele dincomponenta planurilor tehnologice.

e. Dotari de mobilier, inventar gospodaresc,paza contra incendiilor, protectia muncii

Aceasta sectiune va cuprinde:

planurile de amplasare si montaj; listele cu dotari.4.2.3. Indicarea distinct a diferentelor fata de

detaliile de executie initiale, cu

precizarea cauzelor care au dus la

aceste diferente.

technologies.

c. PlantsThis section will include drawings concerning the

installations montage for each object, in

conformity with the borderau issued by thedesigner:

layout for machinery and equipmentsplacement;

sketch for machinery and equipmentsplacement;

plants sketch; sections, views, details.d. Endowment and technological plants

This section will include the principaltechnological and montage layouts:

overall designs; technological sketches for thetechnological flow; kinematic sketches; installation sketches; diagrams, monograms, engineering,

technological and montage calculations;

montage layouts, geometry, placementdimensions, technological montage

sketchs;

list with machinery and equipments fromthe technological layouts.

e. Furniture endowment, inventoryhousehold, guard against fire, labor

protection

placement and montage layouts; endowment lists.4.2.3 Indicating the distinct differences

against the initial execution details,

with the clarification of the causes that

leaded to those differences.

Cap. B

Documentatia privind executia Cph. B

Execution documentation

Documentatia tehnica privind executia cuprinde:

1. Autorizatia de construire a obiectivuluide investitie

Documentatia pentru eliberarea autorizatiei de

construire contine urmatoarele piese: (in

conformitate cu prevederile art.5 si 6 din Legeanr. 50/1991) .

Technical documentation concerning execution

consist:

1. Building permit of the investmentobjective

The documentation for the building permit issue

consist the followings pieces (as per law no.

50/1991 art. 5 and 6) .


6/16

1.1.Certificatul de urbanismpentruconstructia in cauza. Certificatul este emis

de autoritatile publice locale. Cererea tipse obtine de la sediul prefecturii sau

primariei.

1.2.Dovada titlului solicitantuluiasupraterenului si constructiilor (titlu de

proprietate sau act de concesionare incopie legalizata).

1.3.Proiectul pentru autorizatie de construire,in doua exemplare. Continutul proiectului

pentru autorizatia de construire este

prezentat in Anexa 14.Inceperea lucrarilor de construire se va

face dupa obtinerea autorizatiei.

2. Proces-verbal de predareprimire aamplasamentului si a bornelor de repere

(Anexa 1)

3. Inregistrari de calitate cu caracterpermanent efectuate pe parcursul

executarii lucrarilor, precum si

documentatii care atesta calitatea

lucrarilor:Actele sunt de trei feluri:

a. Acte referitoare la calitatea materialelorfolosite la realizarea constructiei.

Acestea sunt:

certificate de calitate a materialelor;

rezultatele incercarilor efectuate pematerialele, instalatiile si echipamentelor

care au fost puse in lucrare.

b. Acte care se completeaza de catreconstructor, beneficiar si proiectant lafiecare etapa de lucru:

Formularele sunt urmatoarele:

Proces-verbal de predare-primire aamplasamentului si a bornelor de reper

Proces-verbal de trasare lucrari

Proces-verbal de lucrari ascunseRegistrul proceselor-verbale de lucrari

ascunse

Proces-verbal faze determinante Proces-verbal aspect beton dupa decofrare Condica de betoane Proces-verbal de receptie a terenului de

fundare, a fundatiilor si structurii de

rezistenta

1.1.Urbanism certificatefor the respectiveconstruction. The certificate is issued by the

local public authorities. The tip demand isobtained from the towmhall or prefecture

office.

1.2.The proof of the applicant title on the landand constructions (title of property or

concession act in legalized copy).

1.3.The project for the building permit, in twocopies. The content of the project for the

building permit is presented in 14th

Annex

The works will start after obtaining thebuilding permit.

2. Hand over for the placement andcurbstone mark (1

stAnnex)

3. Quality records with permanent charactercarried out on the works execution, as well

as documentations that certificate the

works quality:

There are three forms of these acts:

a. Acts referring to the quality of materialsused at the building accomplishment:

These are:

quality certificate of the materials;

the results of the attempts carried out onmaterials, installations and equipments that

were uded in the work.

b. Acts that are completed by the constructor,owner and designer for the each and everystage of work:

The forms are the following:

Hand over for the placement and curbstonemarks

Setting out hand over

Hand over for the works which becomehiddenhand over register for hidden

works

Determinat phase hand over Hand over for the concrete aspect after the

formwork removal

Concrete ledger Hand over for the reception of the area,

foundations and resistance structure


7/16

Proces-verbal de montarea instalatiilor demasurare din proiectul de urmarire a

comportarii in exploatare

Jurnalul principalelor evenimente(inundatii, cutremure, temperature

excesive)

c.

Acte care nu folosesc formulare tip darcare trebuie sa existe in Cartea Tehnica:

Registrul unic de comunicari si dispozitiide santier

Nota de constatare a organelor de control Expertize tehnice ca urmare a unor greseli

de executie sau ca urmare a unor accidente

tehnice

Caiete de atasament.

Hand over for mounting the measurementinstallations included in the tracking

project of the behavior in time

The journal of the principal events (floods,earthquakes, high temperature)

c.

Acts that don`t use standard forms butwitch must exist in the Technical Book:

The unique communications and sitedispositions register

Establishment note for the control experts Technical examination that follows some

execution error or some technical

accidents

Attachment specifications

Cap. CDocumentatia privind receptia

lucrarilor

Chp. CExecution documentation

Receptia lucrarilor de constructii de oricecategorie si instalatii aferente se efectueaza atat la

lucrari noi cat si la interventiile in timp (reparatii

capitale, consolidari, modificari, modernizari,

extinderi etc.) asupra lucrarilor existente si serealizeaza in doua etape (conform Hotararii

Guvernului HG nr. 273/1994Regulamentul dereceptie a lucrarilor de constructii si instalatiiaferente acestora);

receptia la terminarea lucrarilor; receptia finala le expirarea perioadei de

garantie.

Completarea datelor de la acest capitol se face

numai dupa ce s-au completat datele de la

capitolul B Executarea lucrarilor si Fisa dedate tehnicepunctele de la 1 la 7.

1. Receptia la terminarea lucrarilorParticipantii sunt:

comisia de receptie; proiectantul lucrarii; executantul lucrarii.2. Receptia finala

Participantii sunt:

comisia de receptie;

The reception of the construction works ofany category and installations are carried out to

the new construction but also at the changes made

in time (capital repairs, consolidations, changes,

improvements, extensions etc.) on the existingconstructions and it`s realized in two stages (as

per GD no. 273/1994Reception rule of theconstruction works and installations afferent) ;

reception at the finishing of the works final reception at the end of the guarantee

period.

The dates completion from this chapter is made

after the dates from the chapter B Works

execution and Technical dates sheet werecompleted !!!!!!!!!!!!!

1. Reception at the end of the worksThe participants are:

the reception commission; the designer; the executant.2. Final reception

The participants are:

the reception commission;


8/16

proiectantul lucrarii; executantul lucrarii.

Comisia de receptie

se numeste de catre investitor este formata din cel putin 5 membri dintre

care:

o unul este reprezentatulinvestitorului;o unul este reprezentant al ordinii

publice locale;

o ceilalti vor fi specialisti indomeniu.

pentru constructiile de importantaexceptionala comisiile vor fi formate dinminim 7 membri si numarul de specialisti

va fi de minim 5.

Pentru locuintele cu max. P+1 comisiilevor fi alcatuite din 2 membri:

o investitorul;o delegatul administratiei locale.

pentru constructiile cu inaltimea mai marede 28 m sau cu sali de capacitate mai mare

de 150 persoane, in comisie va exista si o

persoana desemnata de Comandamentul

Trupelor de Pompieri.

Formularele care trebuie completate cuocazia receptiei sunt urmatoarele:

a. Proces-verbal de receptie la terminarealucrarilor

b. Proces-verbal de receptie finalab.1. Pentru constructiile cu max. P+1b.2. Pentru celelalte tipuri de constructii

c. Alte acte suplimentare incheiate ca urmarea cererii comisiilor de receptie prin care seprevad verificari sau cercetari

suplimentare cu indicarea rezultatelor

obtinute si a modului de rezolvare.

the designer; the executant.The reception commission

it is named by the owner it has at least 5 members :

o one of the is the ownerrepresentative;o one is the public and local

administration representative;

o the other ones will be experts in therespective activity.

For the constructions with a exceptionalimportance the commissions will have 7members and the experts number will be

at least 5

For the buildings with max ground floorand floor the commissions will have 2members:

o the owner;o the public and local administrative

representative.

For the constructions higher than 28 m orwith meeting rooms for over 150 persons,

the commission will have a person from

the Fire brigade Commandament.

The forms that needs to be completed for thereception are the followings:

a. Hand over for the reception at the end ofthe works

b. Hand over for final receptionb.1. For constructions with ground floor and floorb.2. For the other types of construction

c. Another additional acts concluded as a

consequence of the reception commissionsdemand witch prevese checkings or additional

controls with the indication of the results obtained

and solution manner.

Cap. DDocumentatie privind urmarirea

comportarii in exploatare si interventii in timp

Chp. DThe documentation for tracking the

behavior in the exploitation and interventions intime

Cuprinde urmatoarele documente (conform HG

nr.273/1994)

1. Prevederi ale proiectantului1.1.Privind urmarirea comportarii constructiei1.2.Instructiunile de exploatare si intretinere

Consist the following documents (as per GD

no.273/1994)

1. Designer previsions1.1.On the tracking of the construction

behavior


9/16

1.3.Lista prescriptiilor de baza care trebuierespectate in timpul executiei siexploatarii

2. Proiectele in baza carora s-au efectuat,dupa receptia finala a lucrarilor, modificari ale

constructiei fata de proiectul initial realizat.Documentatia care este necesara la acest

punct este aceeasi ca la cap A Documentatieprivind proiectarea.

3. Proiectul de urmarire speciala aconstructiei - daca este cazul

4. Acte de constatare a unor deficienteaparute dupa receptia executarii lucrarilor si

masurile de interventie luate.Aceste acte sunt:

Nota de constatare

Proces-verbal de remediere a defectelor5. Proces-verbal de predarea primire a

instalatiilor de masurare prevazute prin proiectul

de urmarire speciala a constructiei incheiat intre

executant si beneficiar.

6. Referatul cu concluziile anuale si finaleasupra rezultatelor urmaririi speciale

7. Procese-verbale de predarea primire aconstructiei cand se schimba proprietarului.

8. Jurnalul evenimentelor intocmit conformmodelului de formular.

1.2.Exploitation and maintenance instructions1.3.The list with the base prescriptions that

needs to be respected in the execution andexploitation

2. The projects on witch were carried out,after the final reception, changes of the

construction over the initial project.The necessary documentation at this point is the

same as the one from the chapter A The designdocumentation

3. The project for special tracking of theconstructionif it is necessary

4. Establishment acts for some deficiencythat occurs after execution reception and

the intervention measures that were taken.These acts are:

Finding sheet

Hand over for the defect remedial5. Hand over for installation measurement

from the special tracking project of the

construction concluded between the

executant and owner.

6. Report with final and annual conclusionson the special tracking results.

7. Hand over for construction when theowner is changing.

8. Events journal issued as per the standardmodel of the form.

Jurnalul evenimentelor Events journal

Denumirea obiectului . . . . . . . . . . . . . . . . .

Instructiuni de completare

1. Evenimentele care se inscriu in jurnal secodifica cu urmatoarele litere in coloana

categoria evenimentului

UCrezultatele verificarilor periodice din cadrul

urmaririi curente;USRezultatele verificarilor si masuratorilor din

cadrul urmaririi speciale, in cazul in care implica

luarea unor masuri;MMasuri de interventie in cazul constatarii

unor deficiente (reparatii, consolidari, demolari,

etc.);EEvenimente exceptionale (cutremur, inundatii,

The name of the object

Completion instructions

1. The events that are written in the journalare encoded with the following characters in the

event category colum:

CTthe results of the periodical checking

included in the current tracking;STthe results of the checking and measurement

form the special tracking when it is necessary to

take action;Mintervention measurement when some

deficiences are detected (repairs, consolidations,

demolations, etc.);Eexceptional events (earthquakes, floods, fire,


10/16

incendii, ploi torentiale, caderi masive de zapada,

poluari sau alunecari de teren etc.);

DProcese verbale intocmite de organele deverificare pe faze de executie lucrarilor;

CRezultatele controlului privind modul de

intocmire si pastrare a Cartii Tehnice aConstructiei

2. Evenimentele consemnate in jurnal si careau corespondent in actele cuprinse indocumentatia de baza, se prevad cu trimiteri la

dosarul respective, mentionanad natura actelor.

3. Schimbarea proprietarului se va consemnasi in jurnalul evenimentelor.

Prezentarea capului de tabel:

1.Numar curent: _______________2.Data evenimentului ___________3.Categoria evenimentului

_________________________________4.Prezentarea evenimentului si a efectelor

sale asupra constructiei cu trimiteri in actele din

documentatia de baza______________________________

______________________________

____________________________________________________________

______________________________5.Numele, prenumele si unitatea persoanei

care inscrie evenimentul si semnatura sa

Numele ___________________________Prenumele _________________________

Unitatea ___________________________

Semnatura _________________________6.Semnatura responsabilului cu Cartea

Tehnica a Constructiei

Numele ___________________________Prenumele _________________________

Semnatura _________________________

torrent rain, heavy fall of snow, pollutions or

landslides etc.);

Dhand over issued by the checking experts on

execution stages of the work;

CThe results of the control made on thecompletion and storage manner of the Technical

book of the construction.

2. Events that are completed in the journaland witch have connection with the acts included

in the base documentation, these one have

references to the respective file, with the actsorigin mentioned.

3. When the owner will be changed it will bewritten in the events journal too.The head of the table:

1. Current number: ______________2. Event date: __________________3. Event`s category

_________________________________

4. Event`s presentation and his effects on theconstruction with references on the acts from the

base documentation

____________________________________________________________________

____________________________________________________________________

__________________________________

5. Name, surname and the unit of the personthat is writing the event and his signature

Name _____________________________

Surname __________________________Unit ______________________________

Signature __________________________

6. The signature of the Constructiontechnical book responsible

Name ____________________________

Surname _________________________

Signature __________________________

Modul de intocmire a Cartii tehnice a Constructiei Technical book of the Construction preparation

method

Cartea tehnica a constructiei se intocmeste de

catre investitor pentru toate obiectele deconstructii definitive, supuse regimului de

autorizare a constructiilor (conform HG nr.

273/1994).

The Technical book of the construction is

issued by the investor for all the final constructionobjects, on the building permit rule (as per GD

no.273/1994)


11/16


12/16

activitatea de urmarire a comportarii constructiei

in exploatare si investitii in timp asupra acesteia.

Modul de intocmire si completare a cartiitehnice a constructiei se controleaza in mod

obligatoriu astfel:

- de catre comisiile de receptie finala aobiectelor de constructie, cu ocazia

receptiei;- de catre organele de control imputernicitein acest domeniu

Rezultatele controlalelor se vor consemna in

mod obligatoriu in Jurnalul Evenimentelor.

Cartea Tehnica a Constructiei se pastreaza petoata durata de executie a obiectului pana la

demolarea sa; dupa demolare; investitorul preda

exemplarul complet la arhiva unitatilor

administrativ-teritoriale pentru pastrare. Inainte depredare, ea va fi completata cu modul de

desfasurare a actiunii de postutilizare pe baza

instructiunilor elaborate de proiectant.

The owner or administrator will ensure the

tracking activity of the construction behavior inexploitation and investements on this in time.

The way of issue and completion of the

technical book of the construction is checkedobligatory as it follows:

-

by the final reception of the constructioncommissions, at the reception;

- by the control organs empowered from thearea

The control results will be obligatory written in

the Events journal.

The Technical book of the Construction is kept on

all the execution period until his demolition , after

the demolition, the investor hands the full copy tothe territorial administrative units that keep these

documents. Before the hand over, it is completed

with the post service activities on the designerinstructions.

Obligatii si raspunderi ale partilor implicate inrealizarea Cartii Tehnice a Constructiei

Obligatiile si raspunderile sunt prezentate conform

Legii nr. 10/1995

Liabilities and responsabilities for the implicatedparts in the Technical book of Construction

completion

The liabilities and responsabilities are presentedas per Law no. 10/1995

1. Obligatii si raspunderiale investitorilor

Investitorii sunt persoane fizice sau juridice carefinanteaza si realizeaza investitii sau interventii la

constructiile existente in sensul legii si au

urmatoarele obligatii principale referitoare lacalitatea lucrarilor:

Stabilirea nivelului calitativ ce trebuierealizat prin proiectare si executie pe baza

reglementarilor tehnice, precum si a studiilor sicercetarilor efectuate;

Obtinerea acordurilor si a avizelorprevazute de lege, precum si a autorizatiei de

construire;

Asigurarea verificarii proiectelor prinspecialisti verificatori de proiecte atestati;

Asigurarea verificarii executiei corecte alucrarilor de constructii prin diriginti despecialitate sau agenti economici de consultanta

specializati, pe tot parcursul proiectelor;

Actionarea in vederea solutionarii

1. Liabilities and responsabilitiesof the investors

Investors are individuals or juridical person thatfunds and make investments or is intervening at

the existing constructions in the name of law and

have the following liabilities:

Establishment of the quality level that hasto be realized through design and execution on the

technical regulations, as well as studies and

examinations carried out;

Obtaining the agreements andnotifications, as well as building permit;

Ensuring the checking of the projectsthrough the attested project experts;

Ensuring the checking of the correctexecution of the works through site managers or

consultancy economic agents on the entire

projects;

Solving the unconformities, defects thatappeared in the execution and also the projects


13/16

neconformitatilor, a defectelor aparute pe

parcursul executiei lucrarilor, precum si a

deficientelor proiectelor;

Asigurarea receptiei lucrarilor deconstructii la terminarea lucrarilor si la expirarea

perioadei de garantie;

Intocmirea cartii tehnice a constructiei sipredarea acesteia catre proprietar;

Expertizarea constructiilor de catreexpertii tehnici atestati si obtinerea acordului ISC,

in situatiile in care la aceste constructii se executalucrari de reconstruire, consolidare, transformare,

extindere etc.

deficiencies;

Ensuring the construction works receptionat the end of the works and at the expiration of the

guarantee period;

Elaboration of the Technical book of theConstructionand his handing over to the owner;

Constructions examination made by theattested experts and obtaining the SIC agreement,

in the situation when are executed reconstruction,transformation, consolidation and extension

works etc.

2. Obligatii si raspunderi ale proiectantilor 2. Liabilities and responsabilities of the designer

Proiectantii de constructii raspund de

indeplinirea urmatoarelor obligatii principale

referitoare la calitatea constructiilor: Precizarea prin proiect a categoriei de

importanta a constructiei;

Asigurarea prin proiecte si detalii deexecutie nivelului de calitate corespunzatorcerintelor, cu respectarea reglementarilor tehnice

si a clauzelor contractuale;

Prezentarea proiectelor elaborate in fataspecialistilor verificatori de proiecte atestati,

stabiliti de catre investitor precum si solutionareaneconformitatilor si neconcordantelor semnalate;

Elaborarea caietelor de sarcini, ainstructiunilor tehnice privind executia lucrarilor,exploatarea, intretinerea si reparatiile, precum si,

dupa caz, a proiectelor de urmarire privind

comportarea in timp a constructiilor.

Documentatia privind post utilizarea constructiilorse efectueaza numai la solicitarea proprietarului;

Stabilirea, prin proiect, a fazelor deexecutie determinate pentru lucrarile aferente

cerintelor si participarea pe santier la verificarilede calitate legate de acestea;

Stabilirea modului de tratare a defecteloraparute in executie, din vina executantului, laconstructiile la care trebuie sa asigure nivelul decalitate corespunzatoare cerintelor, precum si

urmarirea aplicarii pe santier a solutiilor adoptate,

dupa insusirea acestora de catre specialistii

verificatori de proiecte atestati, la cerereainvestitorului;

Participarea la intocmirea cartii tehnice aconstructiei si la receptia lucrarilor executate.

The designers of the constructions have the

following principal responsabilities related to the

construction quality: Project specification on the importance of

the construction;

Ensuring throught project and executiondetails the quality level as per requirements, alsorespecting the technical rules and contractual

clauses ;

The presentation of the issued projects inthe front of the experts that are checking the

projects and also the solving of the unconformitiesand incongruity that appeard;

The elaboration of the technicalspecification regarding the works execution , theexploitation, the maintenance and repairs also

when it is necessary of the tracking projects

regarding the behavior in time. Documents

regarding post service of the construction is issuedonly at the owner demand.

Estabilisment, through project, of theexecution stages for the afferent works, demands

and participation at the quality checkings on thesite related on this.

Establishing the way to treat the defectsappeard in the execution, because of theexecutant, at the construction that needs a qualitylevel as per requirements, and also the tracking of

the solutions appliance, after those were learned

by the attested expert in project, at the owner

demand;

The participation at the Technical book ofthe construction elaboration and at the reception


14/16

of the completed works.

3. Obligatii si raspunderi

ale executantilor

3. Liabilities and responsabilities

of the executant

Executantul lucrarilor de constructii are

urmatoarele obligatii principale:

Sesizarea investitorilor asupraneconformitatilor si neconcordantelor constatate

in proiecte, in vederea solutionarii;

Inceperea executiei lucrarilor numai laconstructii autorizate in conditiile legii si numai

pe baza si in conformitate cu proiecte verificate de

specialisti atestati;

Asigurarea nivelului de calitatecorespunzator cerintelor printr-un sistem propriu

de calitate conceput si realizat prin personal

propriu, cu responsabili tehnici cu executiaatestati;

Convocarea factorilor care trebuie saparticipe la verificarea lucrarilor ajunse in faze

determinante ale executiei si asigurarea conditiilornecesare efectuarii acestora, in scopul obtinerii

acordului de continuare a lucrarilor;

Solutionarea neconformitatilor, adefectelor si a neconcordantelor aparute in faze de

executie, numai pe baza solutiilor stabilite de

proiectant cu acordul investitorului;

Utilizarea in executia lucrarilor numai aproduselor si a procedeelor prevazute in proiect,certificate sau pentru care exista agremente

tehnice, care conduc la realizarea cerintelor,

precum si gestionarea probelor-martor; inlocuireaproduselor si a procedeelor prevazute in proiect cu

altele care indeplinesc conditiile precizate si

numai pe baza solutiilor stabilite de proiectanti cuacordul investitorului;

Respectarea proiectelor, a detaliilor deexecutie si a dispozitilor de santier pentru

realizarea nivelului de calitate corespunzatorcerintelor;

Sesizarea, in termen de 24 h, a inspectieide stat in constructii, in cazul producerii unor

accidente tehnice in timpul executiei lucrarilor;

Supunerea la receptie numai aconstructiilor care corespund cerintelor de calitatesi pentru care a predate investitorului documentele

necesare intocmirii cartii tehnice a constructiei;

Ducerea la indeplinire, la termenele

The executant of the works has the following

principal liabilities:

Owner notification on about theunconformities and unconcordant that were

estabilished in the project, for solving them;

Start of the execution only on theauthorized constructions in the law conditions and

only on base and conformity with the projects that

were checked by the attested experts;

Ensuring the quality level appropriate tothe demands thought a personal quality concept

realized throught personal staff, with technical

responsible in execution that were attested;

Convocation of the factors that needs toparticipate at the checking for the works found in

determinat phase and ensuring the necessaryconditions to perform, for obtaining the work

continuation;

Solving the unconformities, defects andunconcordances that appeard in the execution

phases, only on the solutions established by the

project with the owner`s agreement;

Utilisation only the products and processfrom the projects in the execution, certified or forhow exist technical agreements that leads at the

requirements completion, also the management of

the witnesssamples, replacing the products andprocess from the project with outher that meet

with the project, based on the designer

establismed solution with the owner agreement;

Respecting the projects, execution detailsand site dispositions for obtaining the quality level

as per requirements;

Notice, in 24 h, the state inspectorate inconstruction, in case of some technical accidents

that occured in the execution;

Reception only at the construction that arein accord with the quality requirements and forwho the necessary documents were handed to the

owner for the technical book of the construction

completion;


15/16

stabilite, a masurilor dispuse prin actele de control

sau prin documentele de receptie a lucrarilor de

constructii;

Remedierea, pe propria cheltuiala, adefectelor calitative aparute din vina sa, atat in

perioada de executie cat si in perioada de garantie

stabilita potrivit legii; Reducerea terenurilor ocupate temporar la

starea lor initiala, la terminarea executiei

lucrarilor;

Stabilirea raspunderilor tuturorparticipantilor la procesul de productiefactori de

raspundere, colaboratori, subcontractantiin

conformitate cu sistemul propriu de asigurare acalitatii adoptat si cu prevederile legale in vigoare.

Completion, at the established terms, ofthe measures in the control acts or through the

reception documents of the construction works;

Remedy, on his own expense, of thequality defects that occured by his fault, in the

execution period as well as the guarantee period

as per law; Compression of the land temporary used at

their initial status, at the end of the works;

Establishing the responsabilities for all theparticipants at the product processresponsibilityfactors, contributors, subcontractorsin

conformity with the personal ensurement quality

system adapted with the legal previsions in force.

4. Obligatii si raspunderi

ale proprietarilor constructiilor

4. Liabilities and responsabilities

of the construction owners

Proprietarii constructiilor au urmatoarele

obligatii principale:

Efectuarea la timp a lucrarilor deintretinere si de reparatii care revin, prevazute

conform normelor legate in cartea tehnica a

constructiei si rezultate din activitatea de urmarirea comportarii in timp a constructiilor;

Pastrarea si completarea la zi a cartiitehnice a constructiei si predarea acestei, la

instrainarea constructiei, noului poprietar; Asigurarea urmaririi comportarii in timp a

constructiilor, conform prevederilor din cartea

tehnica si reglementarilor tehnice;

Efectuarea, dupa caz, de lucrari dereconstituire, consolidare, transformare, extindere,desfiintare partiala, precum si de alte lucrari de

reparatii ale constructiei numai pe baza de

proiecte intocmite de catre persoane fizice saupersoane juridice autorizate si verificate potrivit

legii;

Asigurarea realizarii lucrarilor de investitiiasupra constructiilor,impuse prin reglementarilelegale;

Asigurarea efectuarii lucrarilor din etapade postutilizare a constructiilor, cu respectarea

prevederilor legale in vigoare.

The owners of the construction have the

following liabilities:

Carry out of the maintenance and repairworks in time, as per legal norms included in the

technical book of the construction and the results

from behavior tracking in time of the construction;

Storage and completion up to date of thetechnical book of the construction and handing

her, at the alientation to the new owner; Ensure the tracking of construction

behavior in time, as per technical book and the

technical regulations;

Carry out, if is necessary, ofreconstruction, consolidations, transformations,extension, partial suppression and also other repair

works of the construction issued by individual or

juridical persons authorized and checked as perlaw;

Ensure the achievement of the investitionworks for constructions, imposed by the legalregulations;

Ensure the completion of the works fromthe post service stage of the construction, in

conformity with the legal regulations.

5. Obligatii si raspunderi ale administratorilor si

ale utilizatorilor constructiilor

5. Liabilities and responsabilities of the

administrators and users of the construction


16/16

Aministratorii si utilizatorii constructiilor au

urmatoarele obligatii principale:

Folosirea constructiilor conforminstructiunilor de exploatare prevazute in carteatehnica a constructiei;

Efectuarea la timp a lucrarilor deintretinere si de reparatii care la revin conformcontractului;

Efectuarea de lucrari de investitie laconstructia existenta de reconstruire, consolidare,

transformare, extindere etc., numai cu acordul

proprietarului si cu respectarea prevederilorlegale;

Efectuarea urmaririi comportarii in timp acostructiilor conform cartii tehnice a constructiei

si contractului incheiat cu proprietarul;

Sesizarea in termen de 24 de ore, ainspectiei de stat in constructii, in cazul unoraccidente tehnice la constructiile in exploatare.

The administrators and users of the construction

have the following principal liabilities:

Use of the construction as per exploitationinstructions on the technical book of theconstruction;

Accomplishment in time the maintainingand repair works as per contract;

Investment works accomplishment at theexisting constructionreconstruction,

consolidation, transformation, extension etc., only

with the owner`s agreement and as per legalprevisions;

Accomplishment of the tracking ofbehavior for construction as per technical book of

the construction and the contract concluded with

the owner;

Notice in 24 hours, the state inspectoratein construction in case of some technical accidentsat the constructions that are in exploitation

68470333 Carte Tehnica Procedura

Documents

Transcript of 68470333 Carte Tehnica Procedura