About Us With our inception of the year 2010, well known for our expertise in

the area of manufacturing Monitoring, Measurement, Marking with Excel Robotics Automation Systems.

With a strong emphasis on technical knowledge, the company is constantly trying to innovate with newer out-of-the-box engineering solutions.

Our Core Strength: Monitoring: Machine Vision System, Non Destructive Material

Testing. Measurement: Dimensional Measurement, Multi Gauge Systems,

Air Leak Testing, Vision Base Measurement etc. Marking: Fiber Laser Marking, Dot Pin Marking. Software Solutions: Wireless Data Acquisition, data logging,

reporting & analysis, Barcode & Data Matrix Reading,Tractability solutions.Robotics & Automation: Pick & Place System, All types Machine Poka-yoke.

Laser Marking Systems

Lasers are now being used to make high-performance surface-acoustic wave (SAW) devices. These lasers raise throughput and lower cost of ownership in comparison to older solid-state laser technology.

Camera Base Machine Vision System

Our organization engaged in providing an exclusive range of Camera Base Machine Vision System across the country. These controllers are engineering marvel and procured after an extensive quality check by our in-house team of experts.

Multi Gauge SolutionMulti-gauging systems are

used to measure a number of dimensions simultaneously. The feature gauged could be external/internal diameters, lengths, straightness, squareness ovality, run-out of faces, etc.

Dot Pin Marking Machine

Pin Marking, also referred to as Stylus and Dot Peen marking, is a Pneumatic OR electro-mechanically controlled carbide or diamond tip assembly that strikes the surface of a part in a succession of dots to create a permanent mark.

Robotic And AutomationAs more manufacturing

facilities and distribution centers discover the benefits of robotic material handling solutions for Machining, Dimensional Multi gauging System, Non-destructive eddy current testing ,Machine Vision for ID OD defect detection.

Eddy Current For Material Testing

Eddy-current testing is one of many electromagnetic testing methods used in nondestructive .When the coil approaches a conductive material, currents opposed to the ones in the coil are induced in the material.

Customize Software SolutionsMicro Logics generally

produce the most efficient system as it is can provide support for the specific needs of the business, which might not be available in an off-the-shelf solution and will provide greater efficiency or better customer service.

Data Acquisition Data Logging Monitoring Reporting And Analysis

Data acquisition is the process of sampling signals that measure real world physical conditions and converting the resulting samples into digital numeric values that can be manipulated by a computer.

Test Rig Or Test Systems

The test rig is designed for the study of thermodynamics of vapors Compression refrigeration cycle by way of demonstration and experimentation. It has a facility to measure various parameters for experimentation.

Air Leak Testing

The measurement principle is based on the variation of pressure, which is proportional to the distance between bore gauge nozzles and part under test.

Contact UsMicro LogicsContact Person: Mr. Somnath VarpeMob:  9850975220Web Site: www.micrologicspune.comAddress:Sr. No 38/1, Khedekar Industrial Estate, Near Bakelite Food Bakery Area: Narhe City: Pune- 411041

Thank you