CURRICULUM VITAE Gabriel Socol -...
Transcript of CURRICULUM VITAE Gabriel Socol -...
CURRICULUM VITAE
INFORMAŢII PERSONALE
Nume Gabriel Socol
Adresă(e) Atomistilor nr. 409, P.O. Box MG-36 RO-77125, Magurele, Romania
Telefon(oane) Fix: (40)-(21) 457 44 91 Mobil: 0745759540
Fax(uri) (40)-(21) 457 42 43, 457 44 67
E-mail(uri) [email protected]
Naţionalitate(-tăţi) romana
Data naşterii 04.10.1976
EXPERIENŢA PROFESIONALĂ
Perioada (1.10.2011- prezent)
Numele şi adresa angajatorului Institutul Național pentru Fizica Laserilor, Plasmei și Radiației; strada
Atomiștilor nr. 409, Măgurele, România RO-77125
Tipul activităţii sau sectorul de
activitate
Cercetare științifică
Funcţia sau postul ocupat Cercetător Științific grd. I
Principalele activităţi şi
responsabilităţi
Perioada (03.2009 – 01.10.2011)
Numele și adresa angajatorului
Tipul activității sau sectorul de
activitate
Funcția sau postul ocupat
Principalele activități și
responsabilități
Sinteza si caracterizarea de filme subtiri prin metode PLD, MAPLE, RF-
MS, dip-caoting, spin-coating pentru aplicatii de senzoristica, fotovoltaice,
fotocataliza, acoperiri dure, biomateriale, eliberare controlata de
medicamente, electronica si optoelectronica.
Institutul Național pentru Fizica Laserilor, Plasmei și Radiației; strada
Atomiștilor nr. 409, Măgurele, România RO-77125
Cercetare Științifică
Cercetător Științific grd. II
Structuri procesate laser: experimnete de depunere si iradieri laser,
investigatii fizico-chimice. Conducator de contracte
Perioada (2006 – 03.2009) Numele și adresa angajatorului
Tipul activității sau sectorul de activitate
Funcția sau postul ocupat
Principalele activități și responsabilități
Perioada (2003 - 2006)
Numele și adresa angajatorului
Tipul activității sau sectorul de activitate
Funcția sau postul ocupat
Principalele activitați și responsabilități
Perioada (2001 - 2003)
Numele si adresa angajatorului
Tipul activității sau sectorul de activitate
Funcția și postul ocupat
Principalele activități și responsabilitați
Perioada (2000 - 2001)
Numele si adresa angajatorului
Tipul activității sau sectorul de activitate
Funcția și postul ocupat
Principalele activități și responsabilități
Institutul Național pentru Fizica Laserilor, Plasmei și Radiației; strada
Atomiștilor nr. 409, Măgurele, România RO-77125
Cercetare Științifică
Cercetător Științific grd. III
Structuri procesate laser: experimnete de depunere si iradieri laser,
investigatii fizico-chimice. Responsabil de contracte
Institutul Național pentru Fizica Laserilor, Plasmei și Radiației; strada
Atomiștilor nr. 409, Măgurele, România RO-77125
Cercetare Științifică
Cercetător Științific
Laser processed structures: deposition experiments and investigation
Institutul de Microtehnologie Erou Iancu Nicolae, Nr.126A, Baneasa-
Bucuresti/ Institutul Național pentru Fizica Laserilor, Plasmei și Radiației;
strada Atomiștilor nr. 409, Măgurele, România RO-77125
Cercetare
Asistent Cercetare Științifică
Structuri procesate laser: experimnete de depunere si iradieri laser,
investigatii fizico-chimice
Institutul de Microtehnologie Erou Iancu Nicolae, Nr. 126A, Baneasa-
București
Cercetare Științifică
Asistent Cercetare Științifică Stagiar
Studiul calitatii si fiabilitatii componentelor electronice
EDUCAŢIE ŞI FORMARE
Perioada (2010 – 2012)
Numele şi tipul instituţiei de
învăţământ şi al organizaţiei
profesionale prin care s-a realizat
formarea profesională
Institutul de Biochimie, Bucuresti, România
Domeniul studiat / aptitudini
ocupaţionale
Biomateriale, nanostructuri si farmacofori: Aplicatii laser in nanostructuri
pentru controlul administrarii de medicamente, implanturi si reconstructie
de tesuturi
Tipul calificării / diploma obţinută Stagiu postdoctoral
Prioada (2001 - 2006)
Numele şi tipul instituţiei de
învăţământ şi al organizaţiei
profesionale prin care s-a realizat
formarea profesională
Titlul calificării
Domeniul studiat / aptitudini
ocupaţionale
Perioada (2000 - 2001)
Numele şi tipul instituţiei de
învăţământ şi al organizaţiei
profesionale prin care s-a realizat
formarea profesională
Titlul calificării
Domeniul studiat / aptitudini
ocupaţionale
Perioada (1995 - 2000)
Numele şi tipul instituţiei de
învăţământ şi al organizaţiei
profesionale prin care s-a realizat
formarea profesională
Titlul calificării
Domeniul studiat / aptitudini
ocupaţionale
Universitate București, Facultatea de Fizică
Doctor in Fizică - “Summa cum laude”
“Starturi subtiri de biomateriale obtinute prin metode laser pentru o noua
generatie de implanturi medicale”
Universitatea București, Facultatea de Fizică
Master in Fizică
Studiul senzorilor de infrarosu
Universitatea București, Facultatea de Fizică
Licentiat în Fizică
Conectori de fibre optice
APTITUDINI ŞI COMPETENŢE
PERSONALE dobândite în cursul vieţii şi carierei dar
care nu sunt recunoscute neapărat printr-
un certificat sau diplomă
Limba(ile) maternă(e) Precizaţi limba(ile) maternă(e) (dacă este cazul specificaţi a doua limbă
maternă)
Limba(ile) străină(e) cunoscută(e) (Enumeraţi limbile cunoscute şi indicaţi nivelul: excelent, bine,
satisfăcător)
Limba străină1
Engleză
Limba străină2 Limba străină3 Etc.
abilitatea de a citi Excelent
abilitatea de a scrie Excelent
abilitatea de a vorbi Excelent
Aptitudini şi competenţe
organizatorice
De exemplu coordonaţi sau conduceţi
activitatea altor persoane, proiecte şi
gestionaţi bugete; la locul de muncă în
acţiuni voluntare ( de exemplu în
domenii culturale sau sportive) sau la
domiciliu.
Functie adminsitrativa:
01.10.2015 – prezent Sef sectia „Laseri”
Director proiecte științifice castigate prin competitie: - 2010 - 2013, TE contract No. 84/2010, “Nanostructures processed by
laser techniques for photovoltaic applications”, UEFISCDI, 170000
EURO.
- 2012 – 2016, PCCA contract No. 153/2012 “Fabrication of
osteoinductive orthopedic implants with gradual 3D hierarchical
structure”, UEFISCDI, 700000 EURO.
- 2015-2017, TE contract PN-II-RU-TE-2014-4-1590 “Controlled external
activation of drug release from smart polymeric systems”, 125000
EURO.
Aptitudini şi competenţe tehnice (utilizare calculator, anumite tipuri de
echipamente, maşini etc.)
Microsoft Office, Adobe Photoschop, Origin, Labview și web design.
Alte aptitudini şi competenţe Competenţe care nu au mai fost
menţionate anterior
Abilitare de a lucra simultan pe mai multe teme. Formarea competențelor
în laborator a tinerilor cercetători.
Informaţii suplimentare - 2014-prezent: membru Consilul Stiintific al INFLPR
- 2013-prezent: Membru Scoala Doctorală a Facultătii de Fizică,
Universitatea Bucuresti
2010-2014: membru si secretar Consilul stiintific al INFLPR
Membrul al Societății Române pentru Biomateriale, România
Membru SPIE - The International Society of Optical Engineering
Publicații și brevete de invenție:
- peste 200 publicații în jurnale cotate ISI;
- peste 1600 citări, factor Hirsh = 21 (conform Web of Knowledge)
- Brevete:
1. Popescu M., Lőrinczi A., Sava F., Tomescu A., Simion C.,
Mihăilescu I.N., Socol G., Axente E., Micloş S., Savastru D.
Methane sensitive material and threshold sensor for methane
detection", No. A/00941, (OSIM) Romanian State Office for
Inventions and Trademarks, 2006.
2. Poeata I., Chiriac A., Mihailescu I.N., Socol G., Duta L., Popescu
A.C., Sima F., Miroiu M., Stan G., Petrescu S., Ianculescu A.
Metoda de realizare a unei mese de titan cu acoperire de
hidroxiapatita. Romanian Patent RO-BOPI 4/2014 din 30.04.2014
Anexă Lista publicații
Semnatura,
Anexă
Listă publicații
2015
1. Simeonov S., Bakalova S., Szekeres A., Minkov I., Socol G., Ristoscu C., Mihailescu I. Electrical
characterization of Si doped AlN films synthesized by pulsed laser deposition. EPJ Applied
Physics 70(1), 10102, 2015.
2. Popescu M., Sava F., Lorinczi A., Velea A., Simandan I.D., Badica P., Burdusel M., Galca
A.C., Matei E., Preda N., Secu M., Socol G., Jipa F., Zamfirescu M., Balan A. Ceramics and
amorphous thin films based on gallium sulphide doped by rare-earth sulphides. Semiconductor
Science and Technology 30(4), 044001, 2015.
3. Grumezescu A.M., Cristescu R., Chifiriuc M.C., Dorcioman G., Socol G., Mihailescu
I.N., Mihaiescu D.E., Ficai A., Vasile O.R., Enculescu M., Chrisey D.B. Fabrication of magnetite-
based core-shell coated nanoparticles with antibacterial properties. Biofabrication 7(1), 015014,
2015.
4. Popescu M., Lorinczi A., Sava F., Velea A., Simandan I.D., Badica P., Burdusel M., Galca A.C.,
Socol G., Jipa F., Zamfirescu M. Thin films of amorphous Ga2S3and rare-earth sulphides.
Materials Letters 142, 229-231, 2015.
5. Craciun D., Socol G., Dorcioman G., Simeone D., Gosset D., Behdad S., Boesl B., Craciun V. Ar
ions irradiation effects in ZrN thin films grown by pulsed laser deposition. Applied Surface
Science 336, 129-132, 2015.
6. Grumezescu V., Andronescu E., Holban A.M., Socol G., Grumezescu A.M., Ficai A., Lazar
V., Chifiriuc M.C., Trusca R., Iordache F. Fabrication and characterization of functionalized
surfaces with 3-amino propyltrimethoxysilane films for anti-infective therapy applications.
Applied Surface Science 336, 401-406, 2015.
7. Grumezescu V., Andronescu E., Holban A.M., Mogoanta L., Mogoşanu G.D., Grumezescu
A.M., Stənculescu A., Socol G., Iordache F., Maniu H., Chifiriuc M.C. MAPLE fabrication of thin
films based on kanamycin functionalized magnetite nanoparticles with anti-pathogenic. Applied
Surface Science 336, 188-195, 2015.
8. Stanculescu F., Rasoga O., Catargiu A.M., Vacareanu L., Socol M., Breazu C., Preda N., Socol
G., Stanculescu A. MAPLE prepared heterostructures with arylene based polymer active layer for
photovoltaic applications. Applied Surface Science 336, 240-248, 2015.
9. Holban A.M., Andronescu E., Grumezescu V., Oprea A.E., Grumezescu A.M., Socol G.,
Chifiriuc, M.C., Lazar V., Iordache F. Carvone functionalized iron oxide nanostructures thin films
prepared by MAPLE for improved resistance to microbial colonization. Journal of Sol-Gel Science
and Technology 73(3), 605-611, 2015.
10. Cristescu R., Surdu A.V., Grumezescu A.M., Oprea A.E., Trusca R., Vasile O., Dorcioman
G., Visan A., Socol G., Mihailescu I.N., Mihaiescu D., Enculescu M., Chifiriuc M.C., Boehm
R.D., Narayan R.J., Chrisey, D.B. Microbial colonization of biopolymeric thin films containing
natural compounds and antibiotics fabricated by MAPLE. Applied Surface Science 336, 234-239,
2015.
11. Grumezescu A.M., Andronescu E., Oprea A.E., Holban A.M., Socol G., Grumezescu V., Chifiriuc
M.C., Iordache F., Maniu H. MAPLE fabricated magnetite@Melissa officinalis and poly lactic
acid: chitosan coated surfaces with anti-staphylococcal properties. Journal of Sol-Gel Science and
Technology 73(3), 612-619, 2015.
12. Iordache F., Oprea A.E., Grumezescu V., Andronescu E., Socol G., Grumezescu A.M., Popa
M., Mogoşanu G.D., Holban A.M., Maniu H. Poly(lactic-co-glycolic) acid/chitosan microsphere
thin films functionalized with Cinnamomi aetheroleum and magnetite nanoparticles for preventing
the microbial colonization of medical surfaces. Journal of Sol-Gel Science and Technology 73(3),
679-686, 2015.
13. Linnik O., Shestopal N., Smirnova N., Eremenko A., Korduban O., Kandyba V., Kryshchuk
T., Socol G., Stefan N., Popescu-Pelin G., Ristoscu C., Mihailescu I.N. Correlation between
electronic structure and photocatalytic properties of non-metal doped TiO2/ZrO2 thin films
obtained by pulsed laser deposition method. Vacuum 114, 166-171, 2015.
14. Craciun D., Socol G., Cristea D.V., Stoicanescu M., Olah N., Balazs K., Stefan N.,Lambers
E., Craciun V. Mechanical properties of pulsed laser deposited nanocrystalline SiC films. Applied
Surface Science 336 391-395, 2015.
15. Iordache F., Grumezescu V., Grumezescu A.M., Curuţiu C., Diţu L.M., Socol G., Ficai A., Truşcə
R., Holban A.M. Gamma-cyclodextrin/usnic acid thin film fabricated by MAPLE for improving
the resistance of medical surfaces to Staphylococcus aureus colonization. Applied Surface Science
336, 407-412, 2015.
16. Craciun D., Socol G., Lambers E., McCumiskey E.J., Taylor C.R., Martin C., Argibay N., Tanne,
D.B., Craciun V. Optical and mechanical properties of nanocrystalline ZrC thin films grown by
pulsed laser deposition. Applied Surface Science 352, 28-32, 2015.
17. Velea A., Socol G., Popescu M., Galca A.C. In-situ characterization of the optical and electronic
properties in GeTe and GaSb thin films Journal of Applied Physics 118, 135712, 2015.
18. Miroiu F.M., Stefan N., Visan A.I., Nita C., Luculescu C.R., Rasoga O., Socol M., Zgura I.,
Cristescu R., Craciun D., Socol G. Composite biodegradable biopolymer coatings of silk fibroin –
Poly(3-hydrohybutyric-acid-co-3-hydroxyvaleric-acid) for biomedical applications. Applied
Surface Science 355, 1123-1131, 2015.
19. Popescu-Pelin, G., Craciun, D., Socol, G., Cristea, D., Floroian, L., Badea, M., Socol, M.,
Craciun, V., "Investigations of pulsed laser deposited TiN thin films for titanium implants";
ROMANIAN REPORTS IN PHYSICS 67 (4) (2015).
2014
1. Bjelajac A., Djokic V., Petrovic R., Socol G., Mihailescu I.N., Florea I., Ersen O., Janackovic D.
Visible light-harvesting of TiO2 nanotubes array by pulsed laser deposited CdS. Applied Surface
Science, 309, 225-230, 2014.
2. Limban, C., Missir, A.V., Grumezescu, A.M., Oprea, A.E., Grumezescu, V., Vasile, B.Ș., Socol,
G., Trușcă, R., Caproiu, M.T., Chifiriuc, M.C., Gălățeanu, B., Costache, M., Morușciag, L.,
Pîrcălăbioru, G., Nuță, D.C. Bioevaluation of novel anti-biofilm coatings based on PVP/Fe3O4
nanostructures and 2-((4-ethylphenoxy)methyl)-N-(arylcarbamothioyl)benzamides Molecules, 19,
12011-12030, 2014.
3. Grumezescu V., Holban A.M., Iordache F., Socol G., Mogoşanu G.D., Grumezescu A.M., Ficai
A., Vasile B.Ş., Truşcǎ R., Chifiriuc M.C., Maniu H. MAPLE fabricated magnetite@eugenol and
(3-hidroxybutyric acid-co-3-hidroxyvaleric acid)-polyvinyl alcohol microspheres coated surfaces
with anti-microbial properties. Applied Surface Science, 306, 16-22, 2014.
4. Socol G., Galca A.C., Craciun D., Hanna M., Taylor C.R., Lambers E., Craciun V. Pulsed laser
deposition of nanocrystalline SiC films. Applied Surface Science, 306, 66-69, 2014.
5. Craciun V., Martin C., Socol G., Tanner D., Swart H.C., Becherescu N., Craciun D. Optical
properties of amorphous indium zinc oxide thin films synthesized by pulsed laser deposition.
Applied Surface Science, 306, 52-55, 2014.
6. Craciun D., Socol G., Stefan N., Dorcioman G., Hanna M., Taylor C.R., Lambers E., Craciun V.
The effect of deposition atmosphere on the chemical composition of TiN and ZrN thin films
grown by pulsed laser deposition. Applied Surface Science, 302, 124-128, 2014.
7. Stanculescu A., Socol M., Rasoga O., Mihailescu I.N., Socol G., Preda N., Breazu C., Stanculescu
F. Laser prepared organic heterostuctures on glass/AZO substrates. Applied Surface Science,302,
169-176, 2014.
8. Grumezescu V., Socol G., Grumezescu A.M., Holban A.M., Ficai A., Truşcǎ R., Bleotu C.,
Balaure P.C., Cristescu R., Chifiriuc M.C. Functionalized antibiofilm thin coatings based on PLA-
PVA microspheres loaded with usnic acid natural compounds fabricated by MAPLE. Applied
Surface Science, 302, 262-267, 2014.
9. Stanculescu A., Socol G., Grigoras M., Ivan T., Vacareanu L., Socol M., Rasoga O., Breazu C.,
Mihailescu I.N., Iordache I., Preda N., Stanculescu F. Laser prepared organic heterostructures
based on star-shaped arylenevinylene compounds. Applied Physics A, 2014.
10. Axente E., Socol G., Beldjilal, S.A., Mercadier L., Luculescu C.R., Trinca L.M., Galca A.C.,
Pantelica D., Ionescu P., Becherescu N., Hermann J., Craciun V. Quantitative analysis of
amorphous indium zinc oxide thin films synthesized by Combinatorial Pulsed Laser Deposition.
Applied Physics A, 2014.
11. Axente E., Hermann J., Socol G., Mercadier L., Beldjilali S.A., Cirisan M., Luculescu C.R.,
Ristoscu C., Mihailescu I.N., Craciun V. Accurate analysis of indium-zinc oxide thin films via
laser-induced breakdown spectroscopy based on plasma modeling. Journal of Analytical Atomic
Spectrometry, 29(3), 553-564, 2014.
12. Grumezescu V., Holban A.M., Grumezescu A.M., Socol G., Ficai A., Vasile B.S., Truscǎ R.,
Bleotu C., Lazar V., Chifiriuc C.M., Mogosanu G.D. Usnic acid-loaded biocompatible magnetic
PLGA-PVA microsphere thin films fabricated by MAPLE with increased resistance to
staphylococcal colonization. Biofabrication, 6(3), 035002, 2014.
13. Bakalova S., Szekeres A., Anastasescu M., Gartner M., Duta L., Socol G., Ristoscu C., Mihailescu
I.N. VIS/IR spectroscopy of thin AIN films grown by pulsed laser deposition at 400°C and 800°C
and various N2 pressures. Journal of Physics: Conference Series, 514(1), 012001, 2014.
14. Holban A.M., Grumezescu V., Grumezescu A.M., Vasile B.S., Truşcǎ R., Cristescu R., Socol G.,
Iordache F. Antimicrobial nanospheres thin coatings prepared by advanced pulsed laser technique.
Beilstein Journal of Nanotechnology,5(1), 872-880, 2014.
15. Serban N., Ristoscu C., Socol G., Stefan N., Mihailescu C.N., Socol M., Mulenko S.A., Petrov
Y.N., Gorbachuk N.T., Mihailescu I.N. Laser synthesis of nanometric iron oxide films for thermo-
sensing applications. Materials Research Bulletin, 50, 148-154, 2014.
16. Anghel A.G., Grumezescu A.M., Chirea M., Grumezescu V., Socol G., Iordache F., Oprea A.E.,
Anghel I., Holban A.M. MAPLE fabricated Fe3O4@Cinnamomum verum antimicrobial surfaces
for improved gastrostomy tubes. Molecules,19(7), 8981-8994, 2014.
17. Socol M., Preda N., Vacareanu L., Grigoras M., Socol G., Mihailescu I.N., Stanculescu F., Jelinek
M., Stanculescu A., Stoicanescu M. Organic heterostructures based on arylenevinylene oligomers
deposited by MAPLE. Applied Surface Science, 302, 216–222, 2014.
18. Dorcioman G., Socol G., Craciun D., Argibay N., Lambers E., Hanna M., Taylor C.R., Craciun V.
Wear tests of ZrC and ZrN thin films grown by pulsed laser deposition. Applied Surface Science,
306, 33–36, 2014.
19. Minkov I.P., Simeonov S., Szekeres A., Fogarassy Zs., Socol G., Ristoscu C., Mihailescu I.
Characterisation of the charge transport mechanism in pulsed laser deposited AlN:Si films.
Proceedings of the International Semiconductor Conference, CAS, 103-106, 6966404, 2014.
20. Velea A., Borca C.N., Socol G., Galca A.C., Grolimund D., Popescu M., Van Bokhoven J.A. In-
situ crystallization of GeTe\GaSb phase change memory stacked films. Journal of Applied Physics
116(23), 234306, 2014.
21. Bakalova S., Szekeres A., Fogarassy Z., Georgiev S., Ivanov T., Socol G., Ristoscu C., Mihailescu
I.N. Synthesis of nanostructured PLD AlN films: XRD and surface-enhanced raman scattering
studies. Micro and Nanosystems 6(1), 9-13, 2014.
2013
1. Mihaiescu D.E., Cristescu R., Dorcioman G., Popescu C.E., Nita C., Socol G., Mihailescu I.N.,
Grumezescu A.M., Tamas D., Enculescu M., Negrea R.F., Ghica C., Chifiriuc C., Bleotu C.,
Chrisey D.B. Functionalized magnetite silica thin films fabricated by MAPLE with antibiofilm
properties. Biofabrication, 5(1), 015007, 2013.
2. Sava F., Velea A., Popescu M., Lorinczi A., Simandan I.-D., Vlaicu A.M., Socol G., Mihailescu
I.N., Stefan N. Effect of broadband light on Ag/As2S3 multilayers. Journal of Non-Crystalline
Solids, 377, 159-161, 2013.
3. Socol G., Preda N., Socol M., Sima L., Luculescu C.R., Sima F., Miroiu M., Axente E., Visan A.,
Stefan N., Cristescu R., Dorcioman G., Stanculescu A., Radulescu L., Mihailescu I.N. MAPLE
deposition of PLGA micro-and nanoparticles embedded into polymeric coatings. Digest Journal of
Nanomaterials and Biostructures, 8(2), 621-630, 2013.
4. Dekić M., Salčinović A., Dominko D., Šrut I., Salamon K., Starešinić D., Biljaković K., Schaefer
H., Demšar J., Socol G., Ristoscu C., Mihailescu I.N., Siketić Z., Bogdanović-Radović I., Šamić
H., Marcus J. Nanocrystalline thin films with charge density wave ground state. Vacuum, 98, 93-
99, 2013.
5. Grumezescu V., Chifiriuc C.M., Holban A.M., Stoica P., Grumezescu A.M., Voicu G., Socol G.,
Huang K.S., Bleotu C., Radulescu R. Antimicrobial and biocompatibility assay of newly
fabricated materials based copper or zinc alginate and SIO2 network. Digest Journal Of
Nanomaterials and Biostructures, 8(2), 869-876, 2013.
6. Cristescu R., Popescu C., Dorcioman G., Miroiu F.M., Socol G., Mihailescu I.N., Gittard S.D.,
Miller P.R., Narayan R.J., Enculescu M., Chrisey D.B. Antimicrobial activity of biopolymer-
antibiotic thin films fabricated by advanced pulsed laser methods. Applied Surface Science, 278,
211-213, 2013.
7. Duta L., Stan G.E., Popescu A.C., Socol G., Miroiu F.M., Mihailescu I.N., Ianculescu A., Poeata
I., Chiriac A. Hydroxyapatite thin films synthesized by Pulsed Laser Deposition onto titanium
mesh implants for cranioplasty applications. Proceedings of SPIE - The International Society for
Optical Engineering, 8882, (888208), 2013.
8. Galca A.C., Socol G., Trinca L.M., Craciun V. Stoichiometry dependence of the optical properties
of amorphous-like Inx-WGawZn1-xO1+0.5x-δ thin films. Applied Surface Science, 281, 96-99,
2013.
9. Sava F., Lorinczi A., Velea A., Simandan I.D., Preda N., Socol G., Mihǎilescu I.N., Zamfira C.S.,
Creţu N.-C., Popescu M. Effect of thermal annealing on the structural and optical properties of
Ag/As2S3 multilayers. Chalcogenide Letters, 10(11), 467-472, 2013.
2012
1. Costescu R.M., Lungu G.A., Socol G., Gheorghe N.G., Macovei D., Negrilǎ C.C., Logofǎtu C.,
Huşanu M.A., Popescu D.G., Tache C.A., Teodorescu C.M. Atomic structure and magnetism of
PLD deposited Tio 2:Fe. Digest Journal of Nanomaterials and Biostructures, 7(1), 73-78, 2012.
2. Cristescu R., Popescu C., Popescu A.C., Socol G., Mihailescu I., Caraene G., Albulescu R.,
Buruiana T., Chrisey D. Pulsed laser processing of functionalized polysaccharides for controlled
release drug delivery systems: Functionalized polysaccharides processed for drug delivery. NATO
Science for Peace and Security Series A: Chemistry And Biology, 231-236, 2012.
3. Galca A.C., Socol G., Craciun V. Optical properties of amorphous-like indium zinc oxide and
indium gallium zinc oxide thin films. Thin Solid Films, 520, 4722-4725, 2012.
4. Szekeres A., Cziraki A., Huhn G., Havancsak K., Vlaikova E., Socol G., Ristoscu C., Mihailescu
I.N. Laser technology for synthesis of AlN films: Influence of the incident laser fluence on the
films microstructure. Journal of Physics: Conference Series, 356(1), 012003, 2012.
5. Minkov I.P., Simeonov S., Szekeres A., Cziraki A., Socol G., Ristoscu C., Mihailescu I.N. Study
of the charge transport mechanism in pulsed laser deposited AlN:Si films. Journal Of Physics:
Conference Series, 356(1), 012038, 2012.
6. Socol G., , Socol M., Sima L., Petrescu S., Enculescu M., Sima F., Miroiu M., Popescu-Pelin G.,
Stefan N., Cristescu R., Mihailescu C.N., Stanculescu A., Sutan C., Mihailescu I.N. Combinatorial
pulsed laser deposition of AG-containing calcium phosphate coatings. Digest Journal of
Nanomaterials and Biostructures, 7(2), 563-576, 2012.
7. Starešinić D., Dominko D., Salamon K., Biljaković K., Tomeljak A., Schäfer H., Huber T.,
Demsar J., Socol G., Ristoscu C., Mihailescu I.N., Siketić Z., Bogdanović Radović I., Pletikapić
G., Svetličić V., Ekić M., Šamić H., Marcus J. Charge density waves in nanocrystalline thin films
of blue bronze K 0.3MoO 3. Physica B: Condensed Matter, 407(11), 1889-1893, 2012.
8. Velea A., Popescu M., Sava F., Lrinczi A., Simandan I.D., Socol G., Mihailescu I.N., Stefan N.,
Jipa F., Zamfirescu M., Kiss A., Braic V. Photoexpansion and nano-lenslet formation in
amorphous As 2S 3 thin films by 800 nm femtosecond laser irradiation. Journal of Applied
Physics, 112(3), 033105, 2012.
9. Besleaga C., Ion L., Ghenescu V., Socol G., Radu A., Arghir I., Florica C., Antohe S. Transparent
indium zinc oxide thin films used in photovoltaic cells based on polymer blends. Thin Solid Films,
520(22), 6803-6806, 2012.
10. Zamfirescu M., Dinescu A., Danila M., Socol G., Radu C. The role of the substrate material type
in formation of laser induced periodical surface structures on ZnO thin films. Applied Surface
Science, 258(23), 9385-9388, 2012.
11. Cristescu R., Popescu C., Socol G., Iordache I., Mihailescu I.N., Mihaiescu D.E., Grumezescu
A.M., Balan A., Stamatin I., Chifiriuc C., Bleotu C., Saviuc C., Popa M., Chrisey D.B. Magnetic
core/shell nanoparticle thin films deposited by MAPLE: Investigation by chemical, morphological
and in vitro biological assays. Applied Surface Science, 258(23), 9250-9255, 2012.
12. Pervolaraki M., Sima F., Socol G., Teodorescu C.M., Gheorghe N.G., Socol M., Mihailescu I.N.,
Moushi E.E., Tasiopoulos A.J., Athanasopoulos G.I., Viskadourakis Z., Giapintzakis J. Matrix
assisted pulsed laser evaporation of Mn 12(Propionate) thin films. Applied Surface Science,
258(23), 9471-9474, 2012.
13. Linnik O., Petrik I., Smirnova N., Kandyba V., Korduban O., Eremenko A., Socol G., Stefan N.,
Ristoscu C., Mihailescu I.N., Sutan C., Malinovschi V., Djokic V., Janakovic D. TiO2/ZrO2 thin
films synthesized by PLD in low pressure N-, C- and/or O-containing gases: Structural, optical
and photocatalytic properties. Digest Journal of Nanomaterials and Biostructures, 7(3), 1343-
1352, 2012.
14. Ghimbeu C.M., Sima F., Ostaci R.V., Socol G., Mihailescu I.N., Vix-Guterl C. Crystalline
vanadium nitride ultra-thin films obtained at room temperature by pulsed laser deposition. Surface
and Coatings Technology, 211, 158-162, 2012.
15. Socol G., Socol M., Stefan N., Axente E., Popescu-Pelin G., Craciun D., Duta L., Mihailescu
C.N., Mihailescu I.N., Stanculescu A., Visan D., Sava V., Galca A.C., Luculescu C.R., Craciun V.
Pulsed laser deposition of transparent conductive oxide thin films on flexible substrates. Applied
Surface Science, 260, 42-46, 2012.
16. Craciun D., Stefan N., Socol G., Dorcioman G., McCumiskey E., Hanna M., Taylor C.R., Bourne
G., Lambers E., Siebein K., Craciun V. Very hard TiN thin films grown by pulsed laser
deposition. Applied Surface Science, 260, 2-6, 2012.
17. Popescu A., Savastru D., Savastru R., Miclos S., Socol G., Mihailescu I.N. High-contrast 2D
etched holes array obtained by direct laser writing on chalcogenide As2S3 films. Physica Status
Solidi (A) Applications and Materials Science, 209(11), 2173-2178, 2012.
18. Sava V., Mitran T.L., Socol G., Antohe S. Silicon surface structuring by XeCl excimer laser
irradiation in atmospheric conditions. Digest Journal of Nanomaterials and Biostructures, 8(1), 61-
68, 2012.
2011
1. Socol G., Galca A.C., Luculescu C.R., Stanculescu A., Socol M., Stefan N., Axente E., Duta L.,
Mihailescu C.M., Craciun V., Craciun D., Sava V., Mihailescu I.N. Tailoring of optical,
compositional and electrical properties of the In xZn 1-xO thin films obtained by combinatorial
pulsed laser deposition. Digest Journal of Nanomaterials and Biostructures, 6(1), 107-115, 2011.
2. Cristescu R., Popescu C., Socol G., Visan A., Mihailescu I.N., Gittard S.D., Miller P.R., Martin
T.N., Narayan R.J., Andronie A., Stamatin I., Chrisey D.B. Deposition of antibacterial of
poly(1,3-bis-(p-carboxyphenoxy propane)-co-(sebacic anhydride)) 20:80/gentamicin sulfate
composite coatings by MAPLE. Applied Surface Science, 257(12), 5287-5292, 2011.
3. Szekeres A., Fogarassy Zs., Petrik P., Vlaikova E., Cziraki A., Socol G., Ristoscu C., Grigorescu
S., Mihailescu I.N. Structural characterization of AlN films synthesized by pulsed laser deposition.
Applied Surface Science, 257(12), 5370-5374, 2011.
4. Craciun D., Bourne G., Socol G., Stefan N., Dorcioman, G., Lambers E., Craciun V.
Characteristics of ZrC/ZrN and ZrC/TiN multilayers grown by pulsed laser deposition. Applied
Surface Science, 257(12), 5332-5336, 2011.
5. Stanculescu A., Vacareanu L., Grigoras M., Socol M., Socol G., Stanculescu F., Preda N., Matei
E., Ionita I., Girtan M., Mihailescu I.N. Thin films of arylenevinylene oligomers prepared by
MAPLE for applications in non-linear optics. Applied Surface Science, 257(12), 5298-5302, 2011.
6. Ilcheva V., Boev V., Petkov, T., Petkov P., Petkov E., Socol G., Mihailescu I.N. Thin As-Se-Sb
films as potential medium for optics and sensor application. NATO Science for Peace and Security
Series B: Physics And Biophysics, 211-216, 2011.
7. Dominko D., Starešinić D., Salamon K., Biljaković K., Tomeljak A., Schäfer H., Huber T.,
Demsar J., Socol G., Ristoscu C., Mihailescu I.N., Siketić Z., Bogdanović Radović I., Pletikapić
G., Svetličić V., Dekić M., Samić H., Marcus J. Detection of charge density wave ground state in
granular thin films of blue bronze K0.3MoO3 by femtosecond spectroscopy. Journal Of Applied
Physics, 110(1), 014907, 2011.
8. Ristoscu C., Ghica C., Papadopoulou E.L., Socol G., Gray D., Mironov B., Mihailescu I.N.,
Fotakis C. Modification of AlN thin films morphology and structure by temporally shaping of fs
laser pulses used for deposition. Thin Solid Films, 519(19), 6381-6387, 2011.
9. Petkova T., Ilcheva V., Petkov E., Petkov P., Socol G., Sima F., Ristoscu C. Mihailescu C.N.,
Mihailescu I.N., Popov C., Reithmaier J.P. Optical studies of (AsSe) 100-xSbx thin films. Applied
Physics A: Materials Science and Processing, 104(3), 959-962, 2011.
10. Stanculescu A., Socol M., Socol G., Mihailescu I.N., Girtan M., Stanculescu F. Maple prepared
organic heterostructures for photovoltaic applications. Applied Physics A: Materials Science and
Processing, 104(3), 921-928, 2011.
11. Ristoscu C., Socol M., Socol G., Mihailescu I.N., Jafer R., Al-Hadeethi Y., Batani D. Synthesis of
ZnO thin films by 40 ps @532 nm laser pulses. Applied Physics A: Materials Science and
Processing, 104(3), 871-876, 2011.
12. Craciun D., Bourne G., Zhang J., Siebein K., Socol G., Dorcioman G., Craciun V. Thin and hard
ZrC/TiN multilayers grown by pulsed laser deposition. Surface and Coatings Technology, 205(23-
24), 5493-5496, 2011.
13. Popescu A.C., Beldjilali S., Socol G., Craciun V., Mihailescu I.N., Hermann J. Analysis of indium
zinc oxide thin films by laser-induced breakdown spectroscopy. Journal of Applied Physics,
110(8), 083116, 2011.
14. Stanculescu A., Socol M., Socol G., Mihailescu I.N., Girtan M., Preda N., Albu A.-M.,
Stanculescu F. Effect of maleic anhydride-aniline derivative buffer layer on the properties of
flexible substrate heterostructures: Indium tin oxide/nucleic acid base/metal. Thin Solid Films,
520(4), 1251-1258, 2011.
15. Socol G., Craciun D., Mihailescu I.N., Stefan N., Besleaga C., Ion L., Antohe S., Kim K.W.,
Norton D., Pearton S.J., Galca A.C., Craciun V. High quality amorphous indium zinc oxide thin
films synthesized by pulsed laser deposition. Thin Solid Films, 520(4), 1274-1277, 2011.
16. Popescu M., Velea A., Simandan I.D., Sava F., Lorinczi A., Ghervase L., Pavelescu G.,
Mihailescu I.N., Socol G., Georgescu S. Luminescence of arsenic sulphide dots doped with
europium, prepared by thermal evaporation and pulsed laser deposition methods. Chalcogenide
Letters, 8(12), 719-724, 2011.
2010
1. Pervolaraki M., Athanasopoulos G.I., Giapintzakis J., Kizas C., Tasiopoulos A.J., Sima F., Socol
G., Mihailescu I.N. Mn12 benzoate thin films on Si substrates fabricated by matrix assisted pulsed
laser evaporation. Journal of Optoelectronics and Advanced Materials, 12(3), 557-560, 2010.
2. Petkova T., Ilcheva V., Petkov P., Socol G., Ristoscu C., Sima F., Mihailescu C.N., Mihailescu
I.N., Popov C., Boev V., Reithmaier J.P. Stress study of thin As-Se-Ag films obtained by vacuum
thermal evaporation and pulsed laser deposition. Journal of Optoelectronics and Advanced
Materials, 12(3), 650-653, 2010.
3. Craciun D., Socol G., Dorcioman G., Stefan N., Bourne G., Craciun V. High quality ZrC,
ZrC/ZrN and ZrC/TiN thin films grown by pulsed laser deposition. Journal of Optoelectronics and
Advanced Materials, 12(3), 461-465, 2010.
4. Popescu M., Velea A., Sava F., Lorinczi A., Tomescu A., Simion C., Matei E., Socol G.,
Mihailescu I.N., Andonie A., Stamatin I. Structure and properties of silver doped SnSe 2 and Ge
2Sb 2Te 5 thin films prepared by pulsed laser deposition. Physica Status Solidi (A) Applications
and Materials Science, 207(3), 516-520, 2010.
5. Szekeres A., Simeonov S., Bakalova S., Minkov I., Cziraki A., Ristoscu C., Socol G., Dorcioman
G., Mihailescu I.N. Effect of incident laser fluence on the structure of pulsed-laser deposited AlN
films. Journal of Optoelectronics and Advanced Materials, 12(3), 542-546, 2010.
6. Stanculescu A., Albu A.-M., Socol G., Stanculescu F., Socol M., Preda N., Rasoga O., Girtan M.,
Iulian I. MAPLE deposited thin monomer films of maleimidic derivatives for photonics. Journal
of Optoelectronics and Advanced Materials, 12(3), 731-739, 2010.
7. Socol G., Macovei A.M., Miroiu F., Stefan N., Duta L., Dorcioman G., Mihailescu I.N., Petrescu
S.M., Stan G.E., Marcov D.A., Chiriac A., Poeata I. Hydroxyapatite thin films synthesized by
pulsed laser deposition and magnetron sputtering on PMMA substrates for medical applications.
Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 169(1-3),
159-168, 2010.
8. Miroiu F.M., Socol G., Visan A., Stefan N., Craciun D., Craciun V., Dorcioman G., Mihailescu
I.N., Sima L.E., Petrescu S.M., Andronie A., Stamatin I., Moga S., Ducu C. Composite
biocompatible hydroxyapatite-silk fibroin coatings for medical implants obtained by Matrix
Assisted Pulsed Laser Evaporation. Materials Science and Engineering B: Solid-State Materials
for Advanced Technology, 169(1-3), 151-158, 2010.
9. Craciun D., Socol G., Stefan N., Miroiu M., Craciun V. Structural investigations of InZnO films
grown by pulsed laser deposition technique. Thin Solid Films, 518(16), 4564-4567, 2010.
10. Socol G., Gnatyuk Y., Stefan N., Smirnova N., Djokić V., Sutan C., Malinovschi V., Stanculescu
A., Korduban O., Mihailescu I.N. Photocatalytic activity of pulsed laser deposited TiO2 thin films
in N2, O2 and CH4. Thin Solid Films, 518(16), 4648-4653, 2010.
11. Hermann J., Mercadier L., Mothe E., Socol G., Alloncle P. On the stoichiometry of mass transfer
from solid to plasma during pulsed laser ablation of brass. Spectrochimica ACTA - Part B Atomic
Spectroscopy, 65(8), 636-641, 2010.
12. Socol M., Socol G., Rasoga O., Stanculescu F., Stanculescu A., Mihailescu I., Ionita I., Preda N.,
Enculescu M., Antohe S. MAPLE preparation and characterization of benzyl thin films.
Optoelectronics and Advanced Materials, Rapid Communications, 4(11), 1802-1806, 2010.
13. Szekeres A., Vlaikova E., Cziraki A., Petrik P., Socol G., Ristoscu C., Mihailescu I.N.
Ellipsometric characterization of AlN films synthesized by Pulsed-Laser-Deposition. Journal Of
Physics: Conference Series, 253(1), 012032, 2010.
14. Duta L., Socol G., Sima F., Mihailescu I.N., Stan G.E., Marcov D.A., Sima L.E., Petrescu S.M.,
Melinescu A., Ianculescu A., Chiriac A., Poeata I. Increased bioactivity of cranio-spinal implants
functionalized with hydroxyapatite nanostructured coatings: Morpho-structural characterization
and in-vitro evaluation. Proceedings - 2nd Advanced Technologies for Enhanced Quality of Life,
Atequal, (5663611), 127-130, 2010.
15. Minkov I.P., Simeonov S., Szekeres A., Ristoscu C., Socol G., Grigorescu S., Mihailescu I.N.
Study of the charge transport mechanism in pulsed laser deposited AlN:Cr films. Journal of
Physics: Conference Series, 253(1), 012036, 2010.
16. Teodorescu C.M., Socol G., Negrila C., Luca D., Macovei D. Nanostructured thin layers of
vanadium oxides doped with cobalt, prepared by pulsed laser ablation: Chemistry, local atomic
structure, morphology and magnetism. Journal of Experimental Nanoscience, 5(6), 509-526, 2010.
2009
1. Craciun D., Socol G., Stefan N., Mihailescu I.N., Bourne G., Craciun V. High-repetition rate
pulsed laser deposition of ZrC thin films. Surface and Coatings Technology, 203(8), 1055-1058,
2009.
2. Szekeres A., Bakalova S., Grigorescu S., Cziraki A., Socol G., Ristoscu C., Mihailescu I.N.
AlN:Cr thin films synthesized by pulsed laser deposition: Studies by X-ray diffraction and
spectroscopic ellipsometry. Applied Surface Science, 255(10), 5271-5274, 2009.
3. Berbecaru C., Alexandru H.V., Ianculescu A., Popescu A., Socol G., Sima F., Mihailescu I.
Bioglass thin films for biomimetic implants. Applied Surface Science, 255(10), 5476-5479, 2009.
4. Craciun D., Socol G., Stefan N., Bourne G., Craciun V. Chemical composition of ZrC thin films
grown by pulsed laser deposition. Applied Surface Science, 255(10), 5260-5263, 2009.
5. Craciun D., Socol G., Stefan N., Miroiu M., Mihailescu I.N., Galca A.-C., Craciun V. Structural
investigations of ITO-ZnO films grown by the combinatorial pulsed laser deposition technique.
Applied Surface Science, 255(10), 5288-5291, 2009.
6. Socol G., Mihailescu I.N., Albu A.-M., Antohe S., Stanculescu F., Stanculescu A., Mihut L.,
Preda N., Socol M., Rasoga O. MAPLE prepared polymeric thin films for non-linear optic
applications. Applied Surface Science, 255(10), 5611-5614, 2009.
7. Petkova T., Popov C., Hineva T., Petkov P., Socol G., Axente E., Mihailescu C.N., Mihailescu
I.N., Reithmaier J.P. Characterization of pulsed laser deposited chalcogenide thin layers. Applied
Surface Science, 255(10), 5318-5321, 2009.
8. Bazavan R., Ion L., Socol G., Enculescu I., Bazavan D., Tazlaoanu C., Lorinczib A., Mihailescu
I.N., Popescu M., Antohe S. Optical properties of pulsed-laser deposited ZnO thinfilms. Journal of
Optoelectronics and Advanced Materials, 11(4), 425-428, 2009.
9. Bakalova S., Szekeres A., Huhn G., Havancsak K., Grigorescu S., Socol G., Ristoscu C.,
Mihailescu I.N. Surface morphology of AlN films synthesized by pulsed laser deposition.
Vacuum, 84(1), 155-157, 2009.
10. Popescu M., Savastru D., Popescu A., Micloş S., Lorinczi A., Sava F., Velea A., Baschir L.,
Ciobanu M., Matei E., Socol G., Mihăilescu I.N., Niciu H. Chalcogenide photonic structures.
Optoelectronics and Advanced Materials, Rapid Communications, 3(9), 851-859, 2009.
11. Simeonov S., Szekeres A., Minkov I., Grigorescu S., Socol G., Ristoscu C., Mihailescu I.N. The
deep level influence on the admittance of AIN/Si structures with pulsed laser deposited AIN films.
Journal of Optoelectronics and Advanced Materials, 11(9), 1292-1295, 2009.
12. Ilcheva V., Petkova T., Petkov P., Boev V., Socol G., Sima F., Ristoscu C., Mihailescu C.N.,
Mihailescu I.N., Popov C. Spectroscopic studies of (AsSe)100-xAgx thin films. Reithmaier, J.P.
Applied Surface Science, 255(24), 9691-9694, 2009.
13. Bakalova S., Szekeres A., Cziraki A., Huhn G., Havancsak K., Grigorescu S., Socol G., Axente
E., Mihailescu I.N., Gavrila R. Growth dynamics of pulsed-laser-deposited AlN films. Journal of
Optoelectronics and Advanced Materials, 11(10), 1479-1482, 2009.
14. Sima L.E., Filimon A., Piticescu R.M., Chitanu G.C., Suflet D.M., Miroiu M., Socol G.,
Mihailescu I.N., Neamtu J., Negroiu G. Specific biofunctional performances of the
hydroxyapatite-sodium maleate copolymer hybrid coating nanostructures evaluated by in vitro
studies. Journal of Materials Science: Materials in Medicine, 20(11), 2305-2316, 2009.
15. Negrila C., Logofatu C., Socol G., Macovei D., Teodorescu C.M. Pulsed laser co-deposition of
titania with Fe: Chemistry, local atomic structure, and light-dependent magnetic properties.
NANOTECHNOLOGY 2009: Fabrication, Particles, Characterization, Mems, Electronics and
Photonics - Technical Proceedings of the 2009 NSTI Nanotechnology Conference and Expo,
NSTI-NANOTECH, 1, 249-252, 2009.
16. Petkova T., Ilcheva V., Popov C., Reithmaier J.P., Socol G., Axente E., Mihailescu I.N., Petkov
P., Hineva T. Study of (As2Se3)100-X(AgI)X thin films prepared by Pld and Vte methods. NATO
Science for Peace and Security Series B: Physics And Biophysics, 329-334, 2009.
17. Simeonov S., Minkov I., Szekeres A., Grigorescu S., Socol G., Ristoscu C., Mihailescu I.N. Trap
space charge limited current in pulsed laser deposited AlN:Cr films. Proceedings of the
International Semiconductor Conference, CAS, 2(5336703), 375-378, 2009.
18. Stanculescu A., Rasoga O., Preda N.,Socol M., Stanculescu F., Ionita I., Albu A.M., Socol G.
Preparation and Characterization of Polar Aniline Functionalized Copolymers Thin Films for
Optical Non-Linear Applications. Ferroelectrics, 389, 159-173, 2009.
2008
1. Le Normand F., Fleaca C.T., Gulas M., Senger A., Ersen O., Mihailescu I.N., Socol G., Muller D.,
Marco de Lucas M.C. Growth of vertically oriented films of carbon nanotubes by activated
catalytic chemical vapor deposition on Fe-Co/TiN/Si(100) substrates. Journal of Materials
Research, 23(3), 619-631, 2008.
2. Simeonov S., Bakalova S., Szekeres A., Kafedjiijska E., Grigorescu S., Socol G., Mihailescu N.
Extended analysis of the frequency dependence of the admittance of MIS structures with pulsed-
laser-deposited AlN films. Journal of Physics: Conference Series, 113(1), 012050, 2008.
3. Hineva T., Petkova T., Petkov P., Mikli V., Socol G., Mihailescu C.N., Mihailescu I.N. Influence
of the preparation method on the As-Se-AgI thin films behavior. Journal of Physics: Conference
Series, 113(1), 012023, 2008.
4. Mihailescu I.N., Lamolle S., Socol G., Miroiu F., Roenold H.J., Bigi A., Mayer I., Cuisinier F.,
Lyngstadaas S.P. In vivo tensile tests of biomimetic titanium implants pulsed laser coated with
nanostructured Calcium Phosphate thin films. Optoelectronics and Advanced Materials, Rapid
Communications, 2(6), 337-341, 2008.
5. Craciun V., Craciun D., Mihailescu I.N., Socol G., Stefan N., Miroiu M., Galca A.-C., Bourne G.
Combinatorial pulsed laser deposition of thin films. Proceedings of SPIE - The International
Society For Optical Engineering, 7005, (70050Y), 2008.
6. Popescu M., Lorinczi A., Sava F., Velea A., Matel E., Socol G., Mihǎilescu I.N. Phase-change
electrical memory elements and devices. Journal of Optoelectronics and Advanced Materials,
10(10), 2616-2621, 2008.
7. Ion L., Rusu M.I., Socol G., Mihǎilescu I.N., Tâzlâoanu C., Antohe S. Electrical and optical
properties of nanostructured ZnO thin films for optoelectronic applications. Journal of
Optoelectronics and Advanced Materials, 10(10), 2599-2602, 2008.
8. Teodorescu C.M., Socol G., Negrila, C.; Luca, D.; Macovei, D. Nanostructured thin layers of
vanadium oxides doped with cobalt, prepared by pulsed laser ablation: Structure, chemistry,
morphology, and magnetism . Nsti Nanotech, Technical Proceedings, 1, 435-438, 2008.
9. Popescu M., Sava F., Lörnczi A., Daróczi L., Kökényesi S., Mihǎilescu I.N., Socol G. Silver
quantum dots deposited on YAG coated silicon wafer. Romanian Reports In Physics, 60(3), 777-
787, 2008. 69. Capuccini C., Torricelli P., Sima F., Boanini E., Ristoscu C., Bracci B., Socol G.,
Fini M., Mihailescu I.N., Bigi A. Strontium-substituted hydroxyapatite coatings synthesized by
pulsed-laser deposition: In vitro osteoblast and osteoclast response. Acta Biomaterialia, 4(6),
1885-1893, 2008.
10. Pivin J.C., Socol G., Mihailescu I., Berthet P., Singh F., Patel M.K., Vincent L. Structure and
magnetic properties of ZnO films doped with Co, Ni or Mn synthesized by pulsed laser deposition
under low and high oxygen partial pressures. Thin Solid Films, 517(2), 916-922, 2008.
11. Craciun D., Socol G., Axente E., Galca A.-C., Singh R., Craciun V. Microstructural investigations
of hafnium aluminum oxide films. Materials Research Society Symposium Proceedings, 1074, 71-
75, 2008.
12. Dominko D., Starešinić D., Biljaković K., Salamon K., Milat O., Tomeljak A., Mihailović D.,
Demšar J., Socol G., Ristoscu C., Mihailescu I.N., Marcus J. Growing thin films of charge density
wave system Rb0.3MoO 3 by pulsed laser deposition. Nato Science for Peace and Security Series
B: Physics And Biophysics, 399-402, 2008.
13. Craciun D., Socol G., Mihailescu I.N., Craciun, V. Combinatorial pulsed laser deposition of ITO-
ZnO:Al thin films for solar cells applications. Materials Research Society Symposium
Proceedings, 1074, 180-185, 2008.
14. Bakalova S., Szekeres A., Cziraki A., Gyorgy E., Grigorescu S., Socol G., Mihailescu I.N. XRD
study of pulsed laser deposited AIN films with nanosized crystallites. NATO Science for Peace
and Security Series B: Physics and Biophysics, 357-364, 2008.
2007
1. Iliescu M., Nelea V., Werckmann J., Socol G., Mihailescu I.N., Mayer I., Cuisinier F.
Morphological and structural characterisation of osseointegrable Mn2+ and CO32- doped
hydroxylapatite thin films. Materials Science and Engineering C, 27(1), 105-109, 2007.
2. Simeonov S., Bakalova S., Kafedjiiska E., Szekeres A., Socol G., Grigorescu S., Mihailescu I.N.
Admittance study of MIS structures with pulsed laser deposited AlN films. Journal of
Optoelectronics and Advanced Materials, 9(2), 323-325, 2007.
3. Hineva T., Petkova T., Popov C., Petkov P., Reithmaier J.P., Fuhrmann-Lieker T., Axente E.,
Sima F., Mihailescu C.N., Socol G., Mihailescu I.N. Optical study of thin (As2Se3)1-x(AgI) x
films. Journal of Optoelectronics and Advanced Materials, 9(2), 326-329, 2007.
4. Tazlaoanu C., Ion L., Socol G., Socol M., Mihailescu I.N., Stanculescu F., Enculescu I., Ionescu
F., Magheruçan L., Antohe S. Photosensitization of ZnO nanostructured thin films with organic
dyes. Journal of Optoelectronics and Advanced Materials, 9(5), 1342-1346, 2007.
5. Cristescu R., Doraiswamy A., Socol G., Grigorescu S., Axente E., Mihaiescu D., Moldovan A.,
Narayan R.J., Stamatin I., Mihailescu I.N., Chisholm B.J., Chrisey D.B. Polycaprolactone
biopolymer thin films obtained by matrix assisted pulsed laser evaporation. Applied Surface
Science, 253(15), 6476-6479, 2007.
6. Ristoscu C., Caiteanu D., Prodan G., Socol G., Grigorescu S., Axente E., Stefan N., Ciupina V.,
Aldica G., Mihailescu I.N. Structural and optical characterization of undoped, doped, and
clustered ZnO thin films obtained by PLD for gas sensing applications. Applied Surface Science,
253(15), 6499-6503, 2007.
7. Socol G., Axente E., Oane M., Voicu L., Petris A., Vlad V., Mihailescu I.N., Mirchin N.,
Margolin R., Naot D., Peled A. Nanoscopic photodeposited structures analyzed by an evanescent
optical method. Applied Surface Science, 253(15), 6535-6538, 2007.
8. Popescu M., Sava F., Lorinczi A., Socol G., Mihǎilescu I.N., Tomescu A., Simion C. Structure,
properties and gas sensing effect of SnSe2 films prepared by pulsed laser deposition method.
Journal of Non-Crystalline Solids, 353(18-21), 1865-1869, 2007.
9. Brǎnescu M., Vailionis A., Huh J., Moldovan A., Socol G. AFM and complementary XRD
measurements of in situ grown YBCO films obtained by pulsed laser deposition. Applied Surface
Science, 253(19), 8179-8183, 2007.
10. Bakalova S., Szekeres A., Cziraki A., Lungu C.P., Grigorescu S., Socol G., Axente E., Mihailescu
I.N. Influence of in situ nitrogen pressure on crystallization of pulsed laser deposited AlN films.
Applied Surface Science, 253(19), 8215-8219, 2007.
11. Cristescu R., Doraiswamy A., Patz T., Socol G., Grigorescu S., Axente E., Sima F., Narayan R.J.,
Mihaiescu D., Moldovan A., Stamatin I., Mihailescu I.N., Chisholm B., Chrisey D.B. Matrix
assisted pulsed laser evaporation of poly(d,l-lactide) thin films for controlled-release drug systems.
Applied Surface Science, 253(19), 7702-7706, 2007.
12. Gyorgy E., Grigorescu S., Socol G., Mihailescu I.N., Janackovic D., Dindune A., Kanepe Z.,
Palcevskis E., Zdrentu E.L., Petrescu S.M. Bioactive glass and hydroxyapatite thin films obtained
by pulsed laser deposition. Applied Surface Science, 253(19), 7981-7986, 2007.
13. Stanoi D., Popescu A., Ghica C., Socol G., Axente E., Ristoscu C., Mihailescu I.N., Stefan A.,
Georgescu S. Nanocrystalline Er:YAG thin films prepared by pulsed laser deposition: An electron
microscopy study. Applied Surface Science, 253(19), 8268-8272, 2007.
14. György E., Santiso J., Figueras A., Socol G., Mihailescu I.N. Biomolecular papain thin films
growth by laser techniques. Journal of Materials Science: Materials In Medicine, 18(8), 1643-
1647, 2007.
15. Socol G., Axente E., Oane M., Voicu L., Dinescu A., Petris A., Vlad V., Mihailescu I.N., Mirchin
N., Margolin R., Naot D., Peled A. Using differential evanescent light intensity for evaluating
profiles and growth rates in KrF laser photodeposited nanostructures. Journal of Materials
Science: Materials In Electronics, 18(SUPPL. 1), 207-211, 2007.
16. Lorinczi A., Sava F., Tomescu A., Simion C., Socol G., Mihailescu I.N., Popescu M. (Te/SnSe2)3
multilayers deposited by pulsed laser deposition. Structure and gas sensing properties. Journal of
Optoelectronics and Advanced Materials, 9(11), 3489-3492, 2007.
17. Socol G., Axente E., Ristoscu C., Sima F., Popescu A., Stefan N., Mihailescu I.N., Escoubas L.,
Ferreira J., Bakalova S., Szekeres A. Enhanced gas sensing of Au nanocluster-doped or -coated
zinc oxide thin films. Journal of Applied Physics, 102(8), 083103, 2007.
18. Bakalova S., Szekeres A., Cziraki A., Grigorescu S., Socol G., Axente E., Mihailescu I.N.
Structure and optical properties of pulsed-laser-deposited AlN thin films for optoelectronic
applications. Proceedings of SPIE - The International Society For Optical Engineering,
6785(67850H), 2007.
19. Simeonov S., Bakalova S., Kafedjiiska E., Szekeres A., Grigorescu S., Popescu A., Cojanu C.,
Sima F., Socol G., Mihailescu I.N. Characterization of pulsed-laser-deposited AlN films as a gate
dielectric in AlN-Si MIS structures. Proceedings of The International Semiconductor Conference,
CAS, 2(4063220), 261-264, 2007.
20. Ion L., Tazlaoanu C., Socol G., Magherusan L., Enculescu I., Bazavan D., Mihailescu I., Antohe
S. Electrical and photoelectrical properties of nanostructured ZnO thin films for photovoltaic
applications. Materials Research Society Symposium Proceedings, 1013, 31-36, 2007.
21. Sima F., Socol G., Axente E., Mihailescu I.N., Zdrentu L., Petrescu S.M., Mayer I. Biocompatible
and bioactive coatings of Mn2+-doped β-tricalcium phosphate synthesized by pulsed laser
deposition. Applied Surface Science, 254(4), 1155-1159, 2007.
22. Tanaskovic D., Jokic B., Socol G., Popescu A., Mihailescu I.N., Petrovic R., Janackovic Dj.
Synthesis of functionally graded bioactive glass-apatite multistructures on Ti substrates by pulsed
laser deposition. Applied Surface Science, 254(4), 1279-1282, 2007.
2006
1. Bakalova S., Simeonov S., Kafedjiiska E., Szekeres A., Grigorescu S., Socol G., Axente E.,
Mihailescu I. Electrical properties of MIS capacitors with AlN films synthesized by pulsed laser
deposition. Plasma Processes and Polymers, 3(2), 205-208, 2006.
2. Branescu M., Vailionis A., Ward I., Huh J., Socol G. In situ grown epitaxial YBa2Cu3O7 - x thin
films by pulsed laser deposition under reduced oxygen pressure during cool-down time. Applied
Surface Science, 252(13), 4573-4577, 2006.
3. Ristoscu C., Socol G., Ghica C., Mihailescu I.N., Gray D., Klini A., Manousaki A., Anglos D.,
Fotakis C. Femtosecond pulse shaping for phase and morphology control in PLD: Synthesis of
cubic SiC. Applied Surface Science, 252(13), 4857-4862, 2006.
4. Ghica C., Ristoscu C., Socol G., Brodoceanu D., Nistor L.C., Mihailescu I.N., Klini A., Fotakis C.
Growth and characterization of β-SiC films obtained by fs laser ablation. Applied Surface Science,
252(13), 4672-4677, 2006.
5. Sava F., Lörinczi A., Popescu M., Socol G., Axente E., Mihailescu I.N., Nistor M. Amorphous
SnSe2 films. Journal of Optoelectronics and Advanced Materials, 8(4), 1367-1371, 2006.
6. Bakalova S., Szekeres A., Grigorescu S., Axente E., Socol G., Mihailescu, I.N. Optical properties
of aluminium nitride films obtained by pulsed laser deposition: An ellipsometric study. Applied
Physics A: Materials Science and Processing, 85(1), 99-102, 2006.
7. Kirilov D., Eom C., Gebale T., Branescu M., Naudin C., Teodorescu V., Socol G., Balasz I., Ducu
C., Jaklovszky J. Efficient and broad-range zoom optics beam delivery systems for laser material
processing. Materials Research Society Symposium Proceedings, 967, 325-336, 2006.
8. Carradò A., Fabre A., Barrallier L., Viart N., Mihailescu I.N., Socol G., Grigorescu S.,
Werckmann J., Ciuca S., Tarcolea M. Comparative studies of textured pulsed laser deposition and
sol-gel growth of thin hydroxyapatite layers on titanium substrates. Materials Science Forum, 524-
525, 885-890, 2006.
2005
1. Branescu M., Teodorescu V.S., Socol G., Balasz I., Ducu C., Jaklovszky J. Experiments on pulsed
laser deposition and characterization of epitaxially in-situ grown YBa2Cu3O7-x thin films.
Journal of Optoelectronics And Advanced Materials, 7(2), 967-972, 2005.
2. Popescu M., Sava F., Lorinczi A., Stegarescu M., Georgescu S., Mihailescu I.N., Socol G., Stanoi
D., Daroczi L., Kokenyesi A., Leonovici M., Wagner D. Preparation and properties of langasite
and YAG Amorphous films. Journal of Optoelectronics and Advanced Materials, 7(2), 963-966,
2005.
3. Stanoi D., Socol G., Grigorescu C., Guinneton F., Monnereau O., Tortet L., Zhang T., Mihailescu
I.N. Chromium oxides thin films prepared and coated in situ with gold by pulsed laser deposition.
Materials Science And Engineering B: Solid-State Materials For Advanced Technology, 118(1-3),
74-78, 2005.
4. Bigi A., Bracci B., Cuisinier F., Elkaim R., Fini M., Mayer I., Mihailescu I.N., Socol G., Sturba
L., Torricelli P. Human osteoblast response to pulsed laser deposited calcium phosphate coatings.
Biomaterials, 26(15), 2381-2389, 2005.
5. György E., Socol G., Mihailescu I.N., Ducu C., Ciuca S. Structural and optical characterization of
WO 3 thin films for gas sensor applications. Journal of Applied Physics, 97(9), 093527, 2005.
6. Guinneton F., Monnereau O., Argeme L., Stanoi D., Socol G., Mihailescu I.N., Zhang T.,
Grigorescu C., Trodahl H.J., Tortet L. PLD thin films obtained from CrO3 and Cr8O 21 targets.
Applied Surface Science, 247(1-4), 139-144, 2005.
7. György E., Socol G., Axente E., Mihailescu I.N., Ducu C., Ciuca S. Anatase phase TiO2 thin
films obtained by pulsed laser deposition for gas sensing applications. Applied Surface Science,
247(1-4), 429-433, 2005.
8. Ristoscu C., Ducu C., Socol G., Craciunoiu F., Mihailescu I.N. Structural and optical
characterization of AlN films grown by pulsed laser deposition. Applied Surface Science, 248(1-
4), 411-415, 2005.
9. Stamatin L., Cristescu R., Socol G., Moldovan A., Mihaiescu D., Stamatin I., Mihailescu I.N.,
Chrisey D.B. Laser deposition of fibrinogen blood proteins thin films by matrix assisted pulsed
laser evaporation. Applied Surface Science, 248(1-4), 422-427, 2005.
10. Mihailescu I.N., Torricelli P., Bigi A., Mayer I., Iliescu M., Werckmann J., Socol G., Miroiu F.,
Cuisinier F., Elkaim R., Hildebrand G. Calcium phosphate thin films synthesized by pulsed laser
deposition: Physico-chemical characterization and in vitro cell response. Applied Surface Science,
248(1-4), 344-348, 2005.
11. Mazingue T., Escoubas L., Spalluto L., Flory F., Socol G., Ristoscu C., Axente E., Grigorescu S.,
Mihailescu I.N., Vainos N.A. Nanostructured ZnO coatings grown by pulsed laser deposition for
optical gas sensing of butane. Journal of Applied Physics, 98(7), 074312, 2005.
12. György E., Socol G., Mihailescu I.N., Santiso J., Ducu C., Ciuca S. Pulsed laser deposited zinc
oxide thin films for optical gas sensor applications. Proceedings of SPIE - The International
Society for Optical Engineering, 5830(06), 50-54, 2005.
13. Stankova N.E., Atanasov P.A., Dikovska A.O., Dimitrov I.G., Socol G., Mihailescu I. Growth of
anatase TiO2 thin films by laser ablation. Proceedings of SPIE - The International Society For
Optical Engineering, 5830(08), 60-64, 2005.
14. Tortet L., Guinneton F., Monnereau O., Stanoi D., Socol G., Mihailescu I.N., Zhang T.,
Grigorescu C. Optimization of Cr8O21 targets for Pulsed Laser Deposition. Crystal Research And
Technology, 40(12), 1124-1127, 2005.
15. Cristescu R., Axente E., Socol G., Moldovan A., Mihaiescu D., Stamatin I., Buruiana T., Jelinek
M., Mihailescu I.N., Chrisey D.B. Matrix-assisted pulsed laser evaporation of azopolyurethane
thin films. Laser Physics, 15(12), 1686-1690, 2005.
2004
1. Popescu, M.; Sava, F.; Lörinczi, A.; Mihailescu, I.N.; Socol, G.; Axente, E.; Kaban, I.; Hoyer, W.
Amorphous thin films based on paraffin doped chalcogenides, prepared by pulsed laser de
position. Journal of Optoelectronics and Advanced Materials, 6(1), 163-167, 2004.
2. Iliescu M., Nelea V., Werckmann J., Mihailescu I.N., Socol G., Bigi A., Bracci B. Electron
microscopy studies of octa-calcium phosphate thin films obtained by pulsed laser deposition. Thin
Solid Films, 453-454, 157-161, 2004.
3. Socol G., Torricelli P., Bracci B., Iliescu M., Miroiu F., Bigi A., Werckmann J., Mihailescu I.N.
Biocompatible nanocrystalline octacalcium phosphate thin films obtained by pulsed laser
deposition. Biomaterials, 25(13), 2539-2545, 2004.
4. Popescu M., Sava F., Lorinczi, A., Savastru R., Savastru D., Rǎdvan R., Mihǎilescu I.N., Socol G.
Optical recording in sulfur-selenium layers. Journal Of Optoelectronics And Advanced Materials,
6(3), 883-886, 2004.
5. Cristescu R., Mihaiescu D., Socol G., Stamatin I., Mihailescu I.N., Chrisey D.B. Deposition of
biopolymer thin films by matrix assisted pulsed laser evaporation. Applied Physics A: Materials
Science And Processing, 79(4-6), 1023-1026, 2004.
6. György E., Toricelli P., Socol G., Iliescu M., Mayer I., Mihailescu I.N., Bigi A., Werckman J.
Biocompatible Mn2+ doped carbonated hydroxyapatite thin films grown by pulsed laser
deposition. Journal of biomedical materials research - Part A, 71(2), 353-358, 2004.
7. Ristoscu C., Dorcioman G., Socol G., Mihailescu I.N., Klini A., Fotakis C. Role of laser pulse
duration and ambient nitrogen pressure in deposition of AlN thin films. Proceedings of SPIE - The
International Society For Optical Engineering, 5581, 356-362, 2004.
8. Stanoi D., Socol G., Ristoscu C., Axente E., Caiteanu D., Mihailescu I.N., Grigorescu C., Bastide
B., Monnereau O., Tortet L., Zhang T. Pulsed laser deposition of chromium oxides thin films:
Chemical stabilization by capping and doping. Proceedings of SPIE - The International Society
For Optical Engineering, 5581, 392-398, 2004.
9. Stankova N.E., Tonchev S.H., Gyorgy E., Socol G., Mihailescu I. Pulsed laser deposition of
LiNbO3 thin films from Li-rich targets. Journal Of Optoelectronics And Advanced Materials,
6(4), 1345-1348, 2004.
10. Branescu M., Socol G., Pantelica D., Negoita F., Lifei F., Jaklovszky J., Moldovan A., Grigorescu
S. New aspects in laser ablation process of the YBCO thin films. Proceedings of SPIE - The
International Society For Optical Engineering, 5581, 472-478, 2004.
11. Popescu M.L., Piticescu R.M., Petrescu S., Zdrentu L., Mihailescu I., Socol G., Lojkowski W.
Biocompatibility of hydroxyl-apatite thin films obtained by pulsed laser deposition. Reviews On
Advanced Materials Science, 8(2), 164-169, 2004.
12. Stankova N.E., Tonchev S.H., Gyorgy E., Socol G., Mihailescu I.N. LiNbO3 thin films grown on
MgO (100) substrates by pulsed laser deposition. Proceedings of SPIE - The International Society
For Optical Engineering, 5581(63), 498-501, 2004.
13. Popescu M., Sava F., Loerinczi A., Mihailescu I. N., Socol G., Axente E., Kaban I., Hoyer W.
Properties of thin films based on paraffin doped chalcogenides, prepared by pulse laser deposition.
Chalcogenide Letters, 1(2), 17-21, 2004.
2003
1. Cristescu, R., Socol G., Mihailescu I.N., Morjan I., Soare I., Popescu M., Sava F., Morosanu C.O.,
Stamatin I., Andrei A., Neamtu J. Pulsed Laser Deposition of Poly (methyl methacrylate) Thin
Films: Experimental evidence by XRD, XPS, AFM, Optical Microscopy, Raman Spectroscopy
and FTIR. Proceedings of SPIE - The International Society For Optical Engineering, 5147, 87-94,
2003.
2. Stanoi D., Socol G., Ristoscu C., Mihailescu I.N., Bastide B., Monnereau O., Tortet L. Pulsed
laser deposition of chromium oxides for applications in spintronics. Proceedings of SPIE - The
International Society For Optical Engineering, 5226, 352-356, 2003.
3. Cristescu R., Socol G., Mihailescu I.N., Popescu M., Sava F., Ion E., Morosanu C.O., Stamatin I.
New results in pulsed laser deposition of poly-methyl-methacrylate thin films. Applied Surface
Science, 208-209(1), 645-650, 2003.
2002
1. Sava F., Cristescu R., Socol G., Radvan R., Savastru R., Savastru D. Structure of bulk and thin
films of Poly-Methyl-Methacrylate (PMMA) polymer prepared by pulsed laser deposition.
Journal of Optoelectronics and Advanced Materials, 4 (4), 965-970, 2002.
2. Popescu M., Sava F., Georgescu S., Gheorghe L., I.N. Mihailescu, Cristescu R., Socol G.,
Bradaczek H. Thin films of langasite (La3Ga5SiO14) prepared by Pulsed Laser Deposition.
J.Optoelectron.Adv. Mater., 4(3), 813-818, 2002.