Aspirator ST ORM 4040 - heinner.com · ORM 4040 Model: XV -4040 Aspirator cu filtrare ciclonica...

Aspirator ST

ORM 4040

Model: XV

-4040

ww

w.h

ein

ner

.ro

Aspirator cu filtrare ciclonica

2400W, 220-240V, 50 Hz

Culoare: rosu/ verde

www.heinner.com 2400W, 50 Hz, 220-240V

1

Va rugam sa cititi cu atentie instructiunile si sa pastrati manualul pentru informari ulterioare.

Acest manual este conceput pentru a va oferi toate instructiunile necesare referitoare la

instalarea, utilizarea si intretinerea aparatului.

Pentru a opera unitatea corect si in siguranta, va rugam sa cititi acest manual cu instructiuni

cu atentie inainte de instalare si utilizare.

I. INTRODUCERE

II. CONTINUTUL PACHETULUI DUMNEAVOASTRA

Aspirator

Manual de utilizare

Certificat de garantie

Accesoriu 2 in 1: perie podea/covor

Accesoriu pentru spatii inguste

Va multumim pentru alegerea acestui produs!


2

III. DESCRIERE GENERALA

1. Cablu alimentare

2. Buton de infasurare/desfasurare automata cabluelectric

3. Buton de pornire/oprire si maner de ajustare a puterii de aspirare

4. Maner

5. Baza

6. Compartiment praf

7. Buton pentru praf

8. Mufa pentru fixarea furtunului

9. Furtun flexibil

10. Perie integrata si duza

11. Perie mare de podea

12. Tub telescopic

13. Selector covor/suprafata dificila

14. Maner pentru tub

15. Cursor putere aspirare


3

IV. MASURI DE SIGURANTA

1. Va rugam sa cititi cu atentie manualul de instructiuni inainte de a utiliza aparatul.

2. Inainte de a conecta aspiratorul la priza, asigurati-va ca tensiunea de alimentare

este in corespondenta cu informatiile de pe eticheta produsului.

3. Pentru evitarea incendiilor, soculului electric si altor vatamari, nu scufundati cablul

electric in apa sau in alte lichide.

4. Va rugam deconectati aspiratorul de la priza, atunci cand nu este in functiune si

inainte de curatare.

5. Nu utilizati aparatul daca observati deteriorari la nivelul cablului electric sau ale

aspiratorului in sine.

6. Nu folositi aspiratorul pentru aspirarea apei sau a oricarui alt lichid, substantelor

inflamabile sau a cenusei fierbinti.

7. Nu indreptati furtunul, tubul sau oricare alt accesoriu conectat la aspiratorul in

functiune catre ochi, urechi si nu introduceti in gura.

8. Nu lasati cablul electric sa intre in contact cu suprafete fierbinti.

9. Cand doriti sa scoateti aparatul din priza, trageti de stecher, nu de cablu.

10. Returnati produsele defecte la cel mai apropiat centru de service. Produsul trebuie

reparat doar de persoane calificate.

11. In cazul in care cablul electric este deteriorat, trebuie inlocuit de catre producator

ori de catre agentul sau service, pentru a evita provocarea unor accidente.

12. Aparatul nu trebuie folosit de persoane (inclusiv copii) cu abilitati psihice,

senzoriale sau mentale reduse, sau cu o lipsa de experienta sau cunostinta, doar

daca acestia primesc supraveghere sau instructiuni cu privire la folosirea aparatului

de la o persoana responsabila de siguranta acestora.

13. Copiii trebuie supravegheati, pentru a va asigura ca nu se joaca cu produsul.

14. Atunci cand aspirati scrum/cenusa, nisip, praf de ciment si substante similare, porii

sacului de hartie se infunda, drept pentru care indicatorul de praf va indica faptul

ca sacul este plin. Inlocuiti sacul, chiar daca nu este plin inca.

15. Nu folositi aparatul niciodata fara filtrul de protectie motor, pentru ca acest lucru

va scurta durata de viata a aparatului.

16. Nu folositi niciodata aparatul fara dispozitivul de praf.


4

V. PREGATIRE PENTUR UTILIZARE

Furtun:

Pentru a conecta furtunul, impingeti-l in aspirator in orificiul special si

rotiti in sensul acelor de ceas. Pentru deconectare, rotiti in sens invers

acelor de ceas si scoateti-l din aspirator. Vezi Fig.1 .

Ajustati tubul telescopic la lungimea dorita. Impingeti partea cu gradatii

in sus si impingeti partea de jos a tubului in jos - Fig.2

Tub telescopic:

Apasati arcul de blocare de pe partea laterala a tubului telescopic si

fixati butonul de fixare in orificiul de pe cealalta parte a tubului.

Conectati tubul telescopic de manerul furtunului, inserati parte mai

ingusta in partea mai larga si rotiti putin.

Perie de podea:

Puteti folosi peria de podea pe covor sau pe pardoseala.

Pentru curatarea pardoselei, impingeti cu piciorul butonul de deasupra

periei, pentru ca benzile cu peri sa iasa din interior.

Pentru curatarea covoarelor, apasati pe buton in sens opus, pentru ca

benzile cu peri sa se retraga in interior.

Peria integrata si duza

Aspiratorul dumneavoastra este vandut impreuna cu unul dintre aceste

accesorii. Conectati-le direct de manerul furtunului sau de tubul

telescopic.

Folositi duza pentru locuri inguste pentru aspirarea suprafetelor mici, a

colturilor stramte sau a locurilor dificil de curatat.

Folositi peria mica pentru a curata computere, rafturi etc.


5

VI. FOLOSIREA APARATULUI

Aspirarea:

Aspiratorul poate fi purtat prin manerul de deasupra aspiratorului.Vezi Fig.3

Trageti cablul in afara si introduceti stecherul in priza.

Apasati butonul ON/OFF pentru pornirea aspiratorului.Vezi Fig.4

Ajustarea puterii de aspirare:

Puteti ajusta puterea de aspirare cu ajutorul:

Butonului de ajustare a puterii de aspirare situat pe manerul furtunului. Vezi Fig.5

Butonului de control de pe aspirator (pe anumite modele) Vezi Fig.6

Golirea containerului de praf:

Goliti containerul pentru praf cel putin atunci cand cantitatea de praf acumulata a atins

marcajul MAX sau cand puterea de aspirare a scazut. Vezi Fig.7

1. Detasati containerul ridicand butonul „Dust Release“. Vezi Fig.8

2. Ridicati containerul din aspirator cu partea de jos in sus..Vezi Fig.9

3. La golire, tineti-l foarte aproape de cosul de gunoi. Vezi Fig.10

4. Trageti de butonul de deschidere iar baza se deschide. Vezi Fig.11

5. Rasuciti incet butonul de deasupra containerului si goliti de praful ramas acolo. Vezi

Fig.12

6. Inchideti baza si puneti containerul de praf in aspirator. Apasati ferm pana cand se

aude un clic si verificati sa fie bine fixat.


6

Curatarea filtrului si inlocuirea:

Aspiratorul are urmatoarele filtre: filtrul HEPA,filtrul de protectie per-motor si

filtrul de protectie post-motor.

Filtrele se pot bloca dupa o perioada de utilizare si astfel reduc din puterea de

aspirare. Este deci foarte important ca filtrele sa fie schimbate dupa un

timp.

Curatarea sau inlocuirea filtrului HEPA:

Intotdeauna scoateti din priza aspiratorul inainte de inlocuirea filtrului. Scoateti

containerul de praf.

1. Deschideti containerul de praf din ambele parti. Detasati partea superioara de

cea inferioara. Vezi Fig.13

2. Tineti capacul de plasa de protectie si rasuciti in directia acelor de cea,

eliberand astfel plasa de protectie. Vezi Fig.14

3. Tineti filtrul HEPA si rotiti in sensul acelor de ceas si apoi indeparati-l. Vezi

Fig.15

4. Daca filtrul HEPA este foarte murdar, clatiti-l foarte bine sub dus si folositi o

perie.

5. Lasati filtrul sa se usuce (aprox. 15 h la temepratura camerei). Folositi din nou

numai cand este complet uscat. Daca mizeria nu s-a putut indeparta, inlocuiti

cu un filtru HEPA nou.

6. Plasati containerul de praf in asprator. Apasati ferm pana cand se aude un clic si

verificati sa fie bine fixat.


7

Curatarea sau inlocuirea filtrului de protectie per-motor:

Intotdeauna scoateti din priza aspiratorul inainte de inlocuirea filtrului. Scoateti

containerul de praf.

Aspiratorul este echipat cu un filtru de protectie per-motor.

1. Se scoate din aspirator containerul de praf.

2. Apasati butonul ca in fig indicata, trageti locasul pentru filtru afara din aspirator.

Vezi Fig.16

3. Deschideti acest compartiment ridicand de cele doua aripioare laterale.Vezi

Fig.17

4. Scoateti filtrul si inserati unul nou in compartiment si apoi apasati cele doua

aripioare pentru fixare. Fig.18.

5. Inserati la loc compartimentul filtrului, apasand ferm pana se aude un clic si se

fixeaza bine.

Nota: Filtrul protectie per-motor nu se spala. Daca este doar putin murdar, este suficient

sa fie curatat scuturandu-l deaspura unui cos de gunoi; totusi, este recomandata

schimbarea regulata a filtrului

Curatarea sau inlocuirea filtrului de protectie post-motor:

Intotdeauna scoateti din priza aspiratorul inainte de inlocuirea filtrului.

1. Rotiti in sens invers acelor de ceas gratarul de emisie si scoateti-l din aspirator. Vezi

Fig.19

2. Scoateti filtrul si inserati unul nou in loc. Vezi Fig.20

3. Puneti la loc gratarul de emisie, rotind in sensul acelor de ceas.


8

Curatare:

Intotdeauna scoateti din priza aspiratorul inainte de curatarea oricaror componente.

Nu spalati nicio componenta a aspiratorului in masina de spalat vase; daca este necesar,

curatati cu o laveta umeda.

Depozitare:

1. Opriti aspiratorul si scoateti din priza.

2. Apasati pe butonul de infasurare a cablului.

3. Aspiratorul poate fi depozitat in pozitie verticala. Vezi Fig21

VII. IDENTIFICARE/ REZOLVARE PROBLEME

Puterea de aspirare este mica:

Verificati ca filtrul HEPA sau cel per-motor sa nu fie blocat sau prea murdar. Daca

este necesar, curatati sau inlocuiti filtrele.

Verificati ca butonul de ajustare de pe maner sa unu fie deschis.

Verificati controlul de putere asirare de pe aspirator (la modele care incorporeaza

acest buton) si setati-l la o putere mai mare.

Verificati peria de podea sau cea mica sau furtunul sa nu fie blocate. Pentru a

indeparta blocajul, demontati componenta si incercati sa deblocati.


9

Caracteristica (Model): XV-4040

Putere: 2400W

Putere de absorbtie: 400W

Nivel de zgomot: <80dB

Alimentare: 230V

Lungime cablu alimentare: 5.2m

Capacitate recipient praf: 4.0L

ELIMINAREA DESEURILOR IN MOD RESPONSABIL FATA DE MEDIU

Poti ajuta la protejarea mediului!

Va rugam sa respectati regulamentele si legile locale: duceti echipamentele electrice nefunctionale

catre un centru de colectare al echipamentelor electrice uzate.

Importator: Network One Distribution

Europolis Logistic Park, Italia Street, 1-7, Chaijna, Ilfov, Romania

Tel: +40 21 211 18 56, www.heinner.ro , www.nod.ro

HEINNER este marca inregistrata a companiei Network One Distribution SRL. Celelalte branduri,

denumirile produselor sunt marci înregistrate ale respectivilor deţinători.

Nicio parte a specificatiilor nu poate fi reprodusa sub orice formă sau prin orice mijloc, utilizata

pentru obtinerea unor derivate precum traduceri, transformari sau adaptari, fara permisiunea

prealabila a companiei NETWORK ONE DISTRIBUTION.

Copyright © 2013 Network One Distibution. All rights reserved.

http://www.heinner.com, http://www.nod.ro

Acest produs este proiectat si realizat in conformitate cu standardele si normele Comunitatii Europene

VIII. FISA TEHNICA

http://www.heinner.ro/

http://www.heinner.com/

http://www.nod.ro/


10

VACUUM CLEANER GALAXY

Code: CVC-H6220

ww

w.h

ein

ner

.co

m

Cyclonic vacuum cleaner, 2400W

220-240V, 50 Hz

Color: Red/ Green


11

Thank you for chosing this product!

Please read this instruction manual carefully before using it and kee it for later information

This manual is conceived for ofering you all of the necessary info regarding instalation, using

and maintenance of the machine. For a correctly and safely use of the machine, please, read

this manual before instalation and using.

I. INTRODUCTION

II. PACKAGE CONTENTS

Vacuum cleaner

Instruction Manual

Warranty card

2 in 1 accessory: floor/ carpet brush

Tight spaces accessory


12

III. GENERAL DESCRIPTION

1.Power cord

2.Cord rewinder release button

3.On/off switch & suction power adjustment knob

4.Carry handle

5. Lower house

6. Dust container

7. Dust knocking knob

8. Front cover

9. Flexible Hose

10.Integrated brush and nozzle

11.Floor brush

12.Tube

13. Hard floors/carpet selector

14. Hand grip

15. Suction power slider


13

IV. SAFETY REGULATIONS

1. Please read this instruction manual carefully before using it and kee it for later

information;

2. Check if the voltage indicated on the appliance corresponds to the local mains

voltage before you connect the appliance;

3. To protect against electrical shock, do not immerse cord or plug into water or other

liquid;

4. Do not use the appliance if the plug, the cord or the appliance itself is damaged;

5. If the mains cord of this appliance is damaged, it must be replaced by the producer

or by the authorized service;

6. Keep the appliance out of the reach of children;

7. Never vacuum water or any other liquid, never vacuum flammable substances and

do not vacuum ashes until they are cold;

8. Do not point the hose, the tube or any other accessory at the eyes or ears nor put

it in your mouth when it is connected to the vacuum cleaner and vacuum cleaner is

switched on;

9. When you use the appliance to vacuum ashes, fine sand, lime cement dust and

similar substance, the pores of the paper dust bag become clogged, as a result, the

dust bag full indicator will indicate that the dust bag is full: replace the dust bag,

even if it is not full yet;

10. Never use the appliance without the motor protection filter. This damages the

motor and shortens the life of the appliance;

11. Never use this appliance without a dust bag

12. If faulty, please return this unit to authorized service, the repair must be done by

authorized people only;

13. Never allow a child to operate this appliance. Children are vulnerable in the kitchen

particularly when unsupervised and if appliances are being used or cooking is being

carried out. Teach children to be aware of dangers in the kitchen, warm them of

the dangers of reaching up to areas where they cannot see properly or should not

be reaching;

14. Do not let the power cord to get in contact with hot surfaces;

15. Unplug the vacuum cleaner when you are not using it or when you are cleaning it;


14

V. PREPARING FOR USE

Hose:

To connect the hose, push it into the appliance and turn it to click.

To disconnect the hose, press the hook on the 2 side of hose heard, then pull it out of

the appliance. See Fig.1

Telescopic tube:

Press the spring loaded lock button on the telescopic tube part and slide the

lock button into the opening of the other tube part.

Connect the telescopic tube part to the handgrip of the hose, then insert the

narrow section into the wider section and turn a little.

Adjust the telescopic tube to the length that you find most comfortable

during vacuumming. See Fig.2

Floor brush:

You can use the floor brush on the carpet or on the hard floors.

To clean hard floors, push the rocker switch on top of the floor brush with

your foot, in order to make the brush strips come out of the brush housing.

To clean the carpet, push the rocker switch on the other side to make the

brush strips pop back in the housing.

Integrate brush & nozzle:

Your vacuum cleaner comes with one of these accessories.

Connect the integrate brush and nozzle directly to the handgrip or to the tube.

1. Use the crevice nozzle to vacuum the small area or to clean narrow

corners or hard-to-reach places.

2. Use the brush nozzle to clean computers, bookshelves etc.


15

VI. USING THE APPLIANCE

Using the appliance:

You can carry the vacuum cleaner by the handle placed on the top front of the appliance. See

Fig.3

1. Pull the electric cord out of the appliance and insert the mains plug into the wall

socket.

2. Press the On/Off button on top of the appliance . See Fig.4

Adjust suction power:

You can adjust the suction power:

Using the suction power slider on the handgrip of the hose. See Fig.5

Using the suction power control placed on the vacuum cleaner (Specific types only).See

Fig.6


16

Emptying the dust container:

You must empty the dust container at least when the swept quantity of dirt in the dust

container has reached the MAX mark or suction power has droped. See Fig.7

1. Release the dust container by lifting up Dust container handle from the top of

dust container. See Fig.8

2. Lift the dust container out of the vacuum cleaner. See Fig.9

3. To the dust container, hold it lower over a dust bin. See Fig.10

4. Push the open button: the bases opens and the dust runs into the dust bin. See

Fig.11

5. Slightly twist the dust knocking knob on top of dust container. Knock the

remaining dust loose. See Fig.12

6. Close the base and place the dust container back in the vacuum cleaner. Press the

dust container firmly into its bracket until it audibly clicks into place. Then check

the dust container to be securely seated.


17

Cleaning the filter and replacement:

The filters can become blocked after some time of using and can thereby reduce the

suction power. It is therefore important that the above mentioned filters are replaced

from time to time.

Cleaning or Replacing the HEPA filter:

Always unplug the appliance before you replace the filter. Lift out the dust container

from vacuum cleaner.

1. Open the dust container base. Clockwise twister the HEPA hold, depart the HEPA

frame from dust container. See Fig.13;

2. Hold the mesh protect cover and turn clockwise, release the mesh protect cover.

See Fig.14

3. Hold the HEPA filter and turn clockwise, remove the HEPA filter from dust up part.

See Fig.15

4. If the HEPA filter is very dirty, rinse it thoroughly with a shower head and use a

brush to clean the dirt on HEPA filter;

5. Then leave the filter to dry (approximative 15 hours at room temperature). You can

only use it again when it is completely dry. If the dirt cannot be removed, insert a

new HEPA filter;

6. Place the HEPA Filter and mesh protect cover back to dust up cover;

7. Place the dust container on the vacuum cleaner. Press the dust container firmly

into its bracket until it audibly clicks into place. Then check if the dust container is

securely seated.


18

Cleaning or Replacing the per motor protecting filter

Always unplug the appliance before you replace the filter.lift out the dust container from

vacuum cleaner.

Your vacuum cleaner is equipped with the per motor protecting filter.

1. Lift the dust container from vacuum cleaner.

2. Press the button as photo shown, pull out the filter holder out of the appliance.see

Fig.16

3. Open the filter holder by lift up two wing on 2 side.as photo show.see Fig.17

4. Remove the filter and Insert a new filter into the holder.and click the 2 wing in the

position. See Fig.18.

5. Insert the holder by pull. And pressing firmly unit it audibly and noticeaby clicks into

place.

Note: The per-motor protecting filter is not washalbe. If it is only slightly dirty, it can also

suffice to knock the filter over a dust bin, however, we recommend you replace the filter

regularly.

Cleaning or Replacing the post motor filter:

Always unplug the appliance before you replace the filter.

1. Apart the exhaust grill by hold the lock handle and remove it from vacuum cleaner.

See Fig.19

2. Remove the filter and insert a new filter into the frame. See Fig.20

3. Place the exhaust grill into vacuum cleaner .

Note: The post motor protecting filter is not washalbe. If it is only slightly dirty, it is

sufficient to knock the filter over a dust bin. However, we recommend you to replace the

filter regularly.


19

Cleaning:

Always switch off and unplug the appliance before you clean any parts.

Do not clean any part of the vacuum cleaner in the dishwasher. If neccessary, clean

the parts with a moist cloth.

Storage:

1. Switch off the appliance and remove the mains plug from the wall socket.

2. Press the cord rewind button to rewind the cord.

You can storage the appliance in vertical parking position. See Fig 21

VII. TROUBLESHOOTING

Troubleshooting:

The suction power is insufficient

Perhaps the HEPA filter or per motor protecting filter is too dirty and blocked. If

neccessary, clean or replace the HEPA filter or per motor protecting filter.

Perhaps the suction power slide on the handgrip is open. Close the slide.

Perhaps the electronic suction power control (specific types only) has been set to

a low

setting. Set the control to a higher setting.

Perhaps the floor brush, nozzle tube or hose is blocked up. To remove the obstruction,

disconnect the block up item and try to clean it.


20

Characteristic (Model): XV-4040

Power: 2400W

Suction power: 400W

Noise level: <80dB

Input: 230V

Power cord length: 5.2m

Dust bag capacity: 4.0 L

VIII. TECHNICAL FICHE

Environment friendly disposal

You can help protect the environment!

Please remember to respect the local regulations: hand in the non-working electrical equipment’s to

an appropriate waste disposal center.

HEINNER is a registered trademark of Network One Distribution SRL. Other brands and product

names are trademarks or registered trademarks of their respective holders.

No part of the specifications may be reproduced in any form or by any means or used to make any

derivative such as translation, transformation, or adaptation without permission from NETWORK

ONE DISTRIBUTION.

Copyright © 2013 Network One Distibution. All rights reserved.

www.heinner.com, http://www.nod.ro

http://www.heinner.com, http://www.nod.ro

This product is in conformity with norms and standards of European Community

Importer: Network One Distribution

Europolis Logistic Park, Italia Street, 1-7, Chaijna, Ilfov, Romania

Tel: +40 21 211 18 56, www.heinner.com , www.nod.ro


http://www.nod.ro/


http://www.nod.ro/


http://www.nod.ro/

Aspirator ST ORM 4040 - heinner.com · ORM 4040 Model: XV -4040 Aspirator cu filtrare ciclonica...

Documents

Transcript of Aspirator ST ORM 4040 - heinner.com · ORM 4040 Model: XV -4040 Aspirator cu filtrare ciclonica...